Commit Graph

4234 Commits

Author SHA1 Message Date
Linus Torvalds e522b75c44 s390 fixes for 7.0-rc6
- Add array_index_nospec() to syscall dispatch table lookup to prevent
   limited speculative out-of-bounds access with user-controlled syscall
   number
 
 - Mark array_index_mask_nospec() __always_inline since GCC may emit an
   out-of-line call instead of the inline data dependency sequence the
   mitigation relies on
 
 - Clear r12 on kernel entry to prevent potential speculative use of user
   value in system_call, ext/io/mcck interrupt handlers
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmnHIWsACgkQjYWKoQLX
 FBgwnwgAhPc5rPBk6rG9BAnertIUC+f7NhXkepryLJctPTldaUvycx6aR+o9wizd
 7LEiur6duGAg7enWpaRa9FVthOk5tytbkGfU/MijJBoZovX5mZX7U0Ky4WcN+D7B
 nFo+CfhWt+jNC6DVZzqhQVrdCxES42olnadLbTbhq5t975lJFgCwJOCcciupawWt
 9Lx/YVHym9xlX4iE+sbc0yWGgicGn7JsPsHjfn5ci4WGgF2uhmF3FFfhVSzYJDZK
 b8TaodVBebzwREy0s0RKmbQAuT/R01sL16yAayHCL6smerAbNPN62oREEIDz2IS+
 fAC/4R7/+nsYQcVpGA/DxztbzK69Uw==
 =V6om
 -----END PGP SIGNATURE-----

Merge tag 's390-7.0-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 fixes from Vasily Gorbik:

 - Add array_index_nospec() to syscall dispatch table lookup to prevent
   limited speculative out-of-bounds access with user-controlled syscall
   number

 - Mark array_index_mask_nospec() __always_inline since GCC may emit an
   out-of-line call instead of the inline data dependency sequence the
   mitigation relies on

 - Clear r12 on kernel entry to prevent potential speculative use of
   user value in system_call, ext/io/mcck interrupt handlers

* tag 's390-7.0-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/entry: Scrub r12 register on kernel entry
  s390/syscalls: Add spectre boundary for syscall dispatch table
  s390/barrier: Make array_index_mask_nospec() __always_inline
2026-03-28 09:50:11 -07:00
Vasily Gorbik 0738d395aa s390/entry: Scrub r12 register on kernel entry
Before commit f33f2d4c7c ("s390/bp: remove TIF_ISOLATE_BP"),
all entry handlers loaded r12 with the current task pointer
(lg %r12,__LC_CURRENT) for use by the BPENTER/BPEXIT macros. That
commit removed TIF_ISOLATE_BP, dropping both the branch prediction
macros and the r12 load, but did not add r12 to the register clearing
sequence.

Add the missing xgr %r12,%r12 to make the register scrub consistent
across all entry points.

Fixes: f33f2d4c7c ("s390/bp: remove TIF_ISOLATE_BP")
Cc: stable@kernel.org
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2026-03-28 00:43:39 +01:00
Greg Kroah-Hartman 48b8814e25 s390/syscalls: Add spectre boundary for syscall dispatch table
The s390 syscall number is directly controlled by userspace, but does
not have an array_index_nospec() boundary to prevent access past the
syscall function pointer tables.

Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Fixes: 56e62a7370 ("s390: convert to generic entry")
Cc: stable@kernel.org
Assisted-by: gkh_clanker_2000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/2026032404-sterling-swoosh-43e6@gregkh
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2026-03-28 00:43:39 +01:00
Paolo Bonzini 12fd965871 KVM: s390: Fixes for 7.0
- fix deadlock in new memory management
 - handle kernel faults on donated memory properly
 - fix bounds checking for irq routing + selftest
 - fix invalid machine checks + logging
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE+SKTgaM0CPnbq/vKEXu8gLWmHHwFAmm5TzoACgkQEXu8gLWm
 HHyrjQ/+KlX/odZnN6KE/WGxB0pf06aXfQTBhM8vmfrig/vimIZrm2xszO6TIdZQ
 rYcUik1mMv1VTCYi4RWnKPklj70NgXRRKwfUNrHzql4VFiTlCPmALHw7LDUDrJEf
 OriU4wL+T9G/638logfZJBmfhunHR6HqHP+LJLm6eIIQKIYmEjPoGpSB1HBP+9YN
 viz2dvKXO8NR41rx14NkqMeyR6zQl+I+1CQCuJmSqxtnAyRFPCTrWLElPFO+J+ha
 02jurSiQk89nLlgEqlzthnbv9NopyaLErSXXx9FzESjHli6hhP8rPtxDL2oJB1VF
 YHDW5ln1w1H22i1VXuyU5jg4D3OOUz7e//CaP5wZBHFUIJxpYzeK7faDLYJHphk4
 JNg4uI+mhQ/6E2Dlos8efefP/gqdVAfqOHr7l+4nCYtfh3aQhezbQAB24W6wQL9/
 gs/TnTRt8Rs2UGXLAY0t3+Y7ATrRynDD5DzmQodc19l26076QodvI1xCeptX5Kth
 N855SIIcCcEbYSK1fSquIeCoJ9aAAyQbLDefNLHtWzgzX+Lz77lnmu90tpVnq4qk
 sjIsFq6qw8xso3bDKviiFOLdJz/zTW33YCHKPAl43iFgc6yC8pTT4hp6J5kcGHmD
 bwRSnUz9mmgmyCzU/DetXo3P+n5mqXG2c+iMMQ8vkig+NVduQ7w=
 =uUMD
 -----END PGP SIGNATURE-----

Merge tag 'kvm-s390-master-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

KVM: s390: Fixes for 7.0

- fix deadlock in new memory management
- handle kernel faults on donated memory properly
- fix bounds checking for irq routing + selftest
- fix invalid machine checks + logging
2026-03-24 17:32:13 +01:00
Christian Borntraeger ab5119735e KVM: s390: vsie: Avoid injecting machine check on signal
The recent XFER_TO_GUEST_WORK change resulted in a situation, where the
vsie code would interpret a signal during work as a machine check during
SIE as both use the EINTR return code.
The exit_reason of the sie64a function has nothing to do with the
kvm_run exit_reason. Rename it and define a specific code for machine
checks instead of abusing -EINTR.
rename exit_reason into sie_return to avoid the naming conflict
and change the code flow in vsie.c to have a separate variable for rc
and sie_return.

Fixes: 2bd1337a12 ("KVM: s390: Use generic VIRT_XFER_TO_GUEST_WORK functions")
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
2026-03-16 16:56:39 +01:00
Linus Torvalds 8d9968859c s390 updates for 7.0-rc4
- Revert IRQ entry/exit path optimization that incorrectly cleared some
   PSW bits before irqentry_exit(), causing boot failures with linux-next
   and HRTIMER_REARM_DEFERRED (which only uncovered the problem)
 
 - Fix zcrypt code to show CCA card serial numbers even when the default
   crypto domain is offline by selecting any domain available, preventing
   empty sysfs entries
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmm0UXkACgkQjYWKoQLX
 FBg+fQf/Xm2n+N1GOw1/Xm7Vlw8x9+oaOxVwQUATRnF3Km6HL3DYyNzqTUS6ANcx
 oSCkFhZapk8DuQeB/gkMeLiGYMSrh73X0DapoSp4YQdMPwLyRt+0VNDJs2OppZrS
 mmlbodxYiQcLcVd0PMkx+YIJ2QbMsqkB2/rQh/icksG2HCIA029p5LowZ7Xcb2q+
 zUbP1QbWkmY6ZD2KFpiIvnJnVo0zlJIc0LZAuRS7r470TlSSRrlCuhP7Zdm0P3jQ
 Jc33/SQ2NrHO5c+CRbqzql8QdXBMJKAyHhp+lH53G/BuGCynsZbP2+cVev+eXxJw
 Xq7j1P4kHh8Wy83d5OvjVk/JTTpSfQ==
 =Blff
 -----END PGP SIGNATURE-----

Merge tag 's390-7.0-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 fixes from Vasily Gorbik:

 - Revert IRQ entry/exit path optimization that incorrectly cleared
   some PSW bits before irqentry_exit(), causing boot failures with
   linux-next and HRTIMER_REARM_DEFERRED (which only uncovered the
   problem)

 - Fix zcrypt code to show CCA card serial numbers even when the
   default crypto domain is offline by selecting any domain available,
   preventing empty sysfs entries

* tag 's390-7.0-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/zcrypt: Enable AUTOSEL_DOM for CCA serialnr sysfs attribute
  s390: Revert "s390/irq/idle: Remove psw bits early"
2026-03-13 14:18:13 -07:00
Heiko Carstens 75aa996ea6 s390: Revert "s390/irq/idle: Remove psw bits early"
This reverts commit d8b5cf9c63.

Mikhail Zaslonko reported that linux-next doesn't boot anymore [2]. Reason
for this is recent change [2] was supposed to slightly optimize the irq
entry/exit path by removing some psw bits early in case of an idle exit.

This however is incorrect since irqentry_exit() requires the correct old
psw state at irq entry. Otherwise the embedded regs_irqs_disabled() will
not provide the correct result.

With linux-next and HRTIMER_REARM_DEFERRED this leads to the observed boot
problems, however the commit is broken in any case.

Revert the commit which introduced this.

Thanks to Peter Zijlstra for pointing out that this is a bug in the s390
entry code.

Fixes: d8b5cf9c63 ("s390/irq/idle: Remove psw bits early") [1]
Reported-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Closes: https://lore.kernel.org/r/af549a19-db99-4b16-8511-bf315177a13e@linux.ibm.com/ [2]
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Tested-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20260306111919.362559-1-hca@linux.ibm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2026-03-07 22:41:10 +01:00
Linus Torvalds 4ae12d8bd9 Second round of Kbuild fixes for 7.0
- Split out .modinfo section from ELF_DETAILS macro, as that macro may
   be used in other areas that expect to discard .modinfo, breaking
   certain image layouts
 
 - Adjust genksyms parser to handle optional attributes in certain
   declarations, necessary after commit 07919126ec ("netfilter:
   annotate NAT helper hook pointers with __rcu")
 
 - Include resolve_btfids in external module build created by
   scripts/package/install-extmod-build when it may be run on
   external modules
 
 - Avoid removing objtool binary with 'make clean', as it is required for
   external module builds
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQR74yXHMTGczQHYypIdayaRccAalgUCaat33gAKCRAdayaRccAa
 lizMAQCxm0P5WsJf3ydYR+5ZzzM7wreNtpMVMXsCbwOKBGY3VwEAyvB7om1a00Ex
 Z6WFa9P4VKW+L4PWMnWoyxcnvl/CdgM=
 =mvIb
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-fixes-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux

Pull Kbuild fixes from Nathan Chancellor:

 - Split out .modinfo section from ELF_DETAILS macro, as that macro may
   be used in other areas that expect to discard .modinfo, breaking
   certain image layouts

 - Adjust genksyms parser to handle optional attributes in certain
   declarations, necessary after commit 07919126ec ("netfilter:
   annotate NAT helper hook pointers with __rcu")

 - Include resolve_btfids in external module build created by
   scripts/package/install-extmod-build when it may be run on external
   modules

 - Avoid removing objtool binary with 'make clean', as it is required
   for external module builds

* tag 'kbuild-fixes-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
  kbuild: Leave objtool binary around with 'make clean'
  kbuild: install-extmod-build: Package resolve_btfids if necessary
  genksyms: Fix parsing a declarator with a preceding attribute
  kbuild: Split .modinfo out from ELF_DETAILS
2026-03-06 20:27:13 -08:00
Nathan Chancellor 8678591b47
kbuild: Split .modinfo out from ELF_DETAILS
Commit 3e86e4d74c ("kbuild: keep .modinfo section in
vmlinux.unstripped") added .modinfo to ELF_DETAILS while removing it
from COMMON_DISCARDS, as it was needed in vmlinux.unstripped and
ELF_DETAILS was present in all architecture specific vmlinux linker
scripts. While this shuffle is fine for vmlinux, ELF_DETAILS and
COMMON_DISCARDS may be used by other linker scripts, such as the s390
and x86 compressed boot images, which may not expect to have a .modinfo
section. In certain circumstances, this could result in a bootloader
failing to load the compressed kernel [1].

Commit ddc6cbef3e ("s390/boot/vmlinux.lds.S: Ensure bzImage ends with
SecureBoot trailer") recently addressed this for the s390 bzImage but
the same bug remains for arm, parisc, and x86. The presence of .modinfo
in the x86 bzImage was the root cause of the issue worked around with
commit d50f210913 ("kbuild: align modinfo section for Secureboot
Authenticode EDK2 compat"). misc.c in arch/x86/boot/compressed includes
lib/decompress_unzstd.c, which in turn includes lib/xxhash.c and its
MODULE_LICENSE / MODULE_DESCRIPTION macros due to the STATIC definition.

Split .modinfo out from ELF_DETAILS into its own macro and handle it in
all vmlinux linker scripts. Discard .modinfo in the places where it was
previously being discarded from being in COMMON_DISCARDS, as it has
never been necessary in those uses.

Cc: stable@vger.kernel.org
Fixes: 3e86e4d74c ("kbuild: keep .modinfo section in vmlinux.unstripped")
Reported-by: Ed W <lists@wildgooses.com>
Closes: https://lore.kernel.org/587f25e0-a80e-46a5-9f01-87cb40cfa377@wildgooses.com/ [1]
Tested-by: Ed W <lists@wildgooses.com> # x86_64
Link: https://patch.msgid.link/20260225-separate-modinfo-from-elf-details-v1-1-387ced6baf4b@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
2026-02-26 11:50:19 -07:00
Vasily Gorbik 1623a554c6 s390/kexec: Disable stack protector in s390_reset_system()
s390_reset_system() calls set_prefix(0), which switches back to the
absolute lowcore. At that point the stack protector canary no longer
matches the canary from the lowcore the function was entered with, so
the stack check fails.

Mark s390_reset_system() __no_stack_protector. This is safe here since
its callers (__do_machine_kdump() and __do_machine_kexec()) are
effectively no-return and fall back to disabled_wait() on failure.

Fixes: f5730d44e0 ("s390: Add stackprotector support")
Reported-by: Nikita Dubrovskii <nikita@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2026-02-25 17:00:25 +01:00
Heiko Carstens 80f63fd09e s390/vtime: Use lockdep_assert_irqs_disabled() instead of BUG_ON()
Use lockdep_assert_irqs_disabled() instead of BUG_ON(). This avoids
crashing the kernel, and generates better code if CONFIG_PROVE_LOCKING
is disabled.

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2026-02-25 16:46:07 +01:00
Heiko Carstens e282ccd308 s390/vtime: Use __this_cpu_read() / get rid of READ_ONCE()
do_account_vtime() runs always with interrupts disabled, therefore use
__this_cpu_read() instead of this_cpu_read() to get rid of a pointless
preempt_disable() / preempt_enable() pair.

Also there are no concurrent writers to the cpu time accounting fields
in lowcore. Therefore get rid of READ_ONCE() usages.

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2026-02-25 16:46:07 +01:00
Heiko Carstens d8b5cf9c63 s390/irq/idle: Remove psw bits early
Remove wait, io, external interrupt bits early in do_io_irq()/do_ext_irq()
when previous context was idle. This saves one conditional branch and is
closer to the original old assembly code.

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2026-02-25 16:46:07 +01:00
Heiko Carstens 257c14e5a1 s390/idle: Inline update_timer_idle()
Inline update_timer_idle() again to avoid an extra function call. This
way the generated code is close to old assembler version again.

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2026-02-25 16:46:07 +01:00
Heiko Carstens 00d8b035eb s390/idle: Slightly optimize idle time accounting
Slightly optimize account_idle_time_irq() and update_timer_idle():

- Use fast single instruction __atomic64() primitives to update per
  cpu idle_time and idle_count, instead of READ_ONCE() / WRITE_ONCE()
  pairs

- stcctm() is an inline assembly with a full memory barrier. This
  leads to a not necessary extra dereference of smp_cpu_mtid in
  update_timer_idle(). Avoid this and read smp_cpu_mtid into a
  variable

- Use __this_cpu_add() instead of this_cpu_add() to avoid disabling /
  enabling of preemption several times in a loop in update_timer_idle().

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2026-02-25 16:46:07 +01:00
Heiko Carstens aefa6ec890 s390/idle: Add comment for non obvious code
Add a comment to update_timer_idle() which describes why wall time (not
steal time) is added to steal_timer. This is not obvious and was reported
by Frederic Weisbecker.

Reported-by: Frederic Weisbecker <frederic@kernel.org>
Closes: https://lore.kernel.org/all/aXEVM-04lj0lntMr@localhost.localdomain/
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2026-02-25 16:46:07 +01:00
Heiko Carstens dbc0fb3567 s390/vtime: Fix virtual timer forwarding
Since delayed accounting of system time [1] the virtual timer is
forwarded by do_account_vtime() but also vtime_account_kernel(),
vtime_account_softirq(), and vtime_account_hardirq(). This leads
to double accounting of system, guest, softirq, and hardirq time.

Remove accounting from the vtime_account*() family to restore old behavior.

There is only one user of the vtimer interface, which might explain
why nobody noticed this so far.

Fixes: b7394a5f4c ("sched/cputime, s390: Implement delayed accounting of system time") [1]
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2026-02-25 16:46:07 +01:00
Heiko Carstens 0d785e2c32 s390/idle: Fix cpu idle exit cpu time accounting
With the conversion to generic entry [1] cpu idle exit cpu time accounting
was converted from assembly to C. This introduced an reversed order of cpu
time accounting.

On cpu idle exit the current accounting happens with the following call
chain:

-> do_io_irq()/do_ext_irq()
 -> irq_enter_rcu()
  -> account_hardirq_enter()
   -> vtime_account_irq()
    -> vtime_account_kernel()

vtime_account_kernel() accounts the passed cpu time since last_update_timer
as system time, and updates last_update_timer to the current cpu timer
value.

However the subsequent call of

 -> account_idle_time_irq()

will incorrectly subtract passed cpu time from timer_idle_enter to the
updated last_update_timer value from system_timer. Then last_update_timer
is updated to a sys_enter_timer, which means that last_update_timer goes
back in time.

Subsequently account_hardirq_exit() will account too much cpu time as
hardirq time. The sum of all accounted cpu times is still correct, however
some cpu time which was previously accounted as system time is now
accounted as hardirq time, plus there is the oddity that last_update_timer
goes back in time.

Restore previous behavior by extracting cpu time accounting code from
account_idle_time_irq() into a new update_timer_idle() function and call it
before irq_enter_rcu().

Fixes: 56e62a7370 ("s390: convert to generic entry") [1]
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2026-02-25 16:46:07 +01:00
Kees Cook 189f164e57 Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses
Conversion performed via this Coccinelle script:

  // SPDX-License-Identifier: GPL-2.0-only
  // Options: --include-headers-for-types --all-includes --include-headers --keep-comments
  virtual patch

  @gfp depends on patch && !(file in "tools") && !(file in "samples")@
  identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex,
 		    kzalloc_obj,kzalloc_objs,kzalloc_flex,
		    kvmalloc_obj,kvmalloc_objs,kvmalloc_flex,
		    kvzalloc_obj,kvzalloc_objs,kvzalloc_flex};
  @@

  	ALLOC(...
  -		, GFP_KERNEL
  	)

  $ make coccicheck MODE=patch COCCI=gfp.cocci

Build and boot tested x86_64 with Fedora 42's GCC and Clang:

Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01

Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-22 08:26:33 -08:00
Linus Torvalds bf4afc53b7 Convert 'alloc_obj' family to use the new default GFP_KERNEL argument
This was done entirely with mindless brute force, using

    git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
        xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'

to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.

Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.

For the same reason the 'flex' versions will be done as a separate
conversion.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21 17:09:51 -08:00
Kees Cook 69050f8d6d treewide: Replace kmalloc with kmalloc_obj for non-scalar types
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:

Single allocations:	kmalloc(sizeof(TYPE), ...)
are replaced with:	kmalloc_obj(TYPE, ...)

Array allocations:	kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with:	kmalloc_objs(TYPE, COUNT, ...)

Flex array allocations:	kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with:	kmalloc_flex(*PTR, FAM, COUNT, ...)

(where TYPE may also be *VAR)

The resulting allocations no longer return "void *", instead returning
"TYPE *".

Signed-off-by: Kees Cook <kees@kernel.org>
2026-02-21 01:02:28 -08:00
Linus Torvalds 9806790115 s390 fixes for 7.0 merge window
- Make KEXEC_SIG available again for CONFIG_MODULES=n
 
 - The s390 topology code used to call rebuild_sched_domains() before common
   code scheduling domains were setup. This was silently ignored by common
   code, but now results in a warning. Address by avoiding the early call
 
 - Convert debug area lock from spinlock to raw spinlock to address lockdep
   warnings
 
 - The recent 3490 tape device driver rework resulted in a different device
   driver name, which is visible via sysfs for user space. This breaks at
   least one user space application. Change the device driver name back to
   its old name to fix this
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEECMNfWEw3SLnmiLkZIg7DeRspbsIFAmmYUo8ACgkQIg7DeRsp
 bsL+rw//f6AadV9X3tCPe/vaNdxQWkVtd1Ov+eKYkIohSFvghBo4+4c6qXlsc4jp
 Opedqs2+YUdx2/tR3nTPkfG/Nm49rGpB+i4CYAjBUlAjIN1czyUlvICJ6ZVQbpQt
 zR+I7Ej/QsBR0XMqbUfPNWMwbdZlW395kXNhCAKckbjM1M+Hezp9WZjuaQ1vWCUv
 wGXAUI+/fTgPKUu3nIQRw2JkG2M+IfFj3jkYMXTW8D8WzoqLXPwtjmjcDtTU/VDr
 otq97rDUd8MvNsxV5hX+T7nI0JQIFrdb32bCy0mhWhnvc7rHdewLfp5+793vKG/K
 DcOouXr/vJcPUhAUQI3ksREAwAEJV1phKeILXbbUhpkAZUQAozVG6+YrzMk/4VSW
 Zm6BGcOLVo0DQtn97I55gKSPFiNoCQwSdU+CcrbzA8aEDBMfxLFKBvh50sAx/0I3
 zXbXYDjgPdqOKuyUprB8Y6PJTrCnHebXPGs2Kgl2XU3k4m61h/60EHIXe6w0ErM8
 1hl8+Rdn4jmWDcAOFKTBpo8Y/o+WZVcNssPr4F7ArcjJTWmAtxWP3NQAux3UM2HW
 3dOV6dcdbmndKSmKwtWrvMVv0GvcgWAp/NhjwKx37EovYLFJg4DqtiioqiOFjWKD
 4gwIB8gKxbWjNSGq3cKTiH021iWoRIDoCeAFJWRdrH5xt7rxCWc=
 =7EJS
 -----END PGP SIGNATURE-----

Merge tag 's390-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 fixes from Heiko Carstens:

 - Make KEXEC_SIG available again for CONFIG_MODULES=n

 - The s390 topology code used to call rebuild_sched_domains() before
   common code scheduling domains were setup. This was silently ignored
   by common code, but now results in a warning. Address by avoiding the
   early call

 - Convert debug area lock from spinlock to raw spinlock to address
   lockdep warnings

 - The recent 3490 tape device driver rework resulted in a different
   device driver name, which is visible via sysfs for user space. This
   breaks at least one user space application. Change the device driver
   name back to its old name to fix this

* tag 's390-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/tape: Fix device driver name
  s390/debug: Convert debug area lock from a spinlock to a raw spinlock
  s390/smp: Avoid calling rebuild_sched_domains() early
  s390/kexec: Make KEXEC_SIG available when CONFIG_MODULES=n
2026-02-20 09:24:45 -08:00
Benjamin Block 3ce500aac0 s390/debug: Convert debug area lock from a spinlock to a raw spinlock
With PREEMPT_RT as potential configuration option, spinlock_t is now
considered as a sleeping lock, and thus might cause issues when used in
an atomic context. But even with PREEMPT_RT as potential configuration
option, raw_spinlock_t remains as a true spinning lock/atomic context.
This creates potential issues with the s390 debug/tracing feature. The
functions to trace errors are called in various contexts, including
under lock of raw_spinlock_t, and thus the used spinlock_t in each debug
area is in violation of the locking semantics.

Here are two examples involving failing PCI Read accesses that are
traced while holding `pci_lock` in `drivers/pci/access.c`:

=============================
[ BUG: Invalid wait context ]
6.19.0-devel #18 Not tainted
-----------------------------
bash/3833 is trying to lock:
0000027790baee30 (&rc->lock){-.-.}-{3:3}, at: debug_event_common+0xfc/0x300
other info that might help us debug this:
context-{5:5}
5 locks held by bash/3833:
 #0: 0000027efbb29450 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x7c/0xf0
 #1: 00000277f0504a90 (&of->mutex#2){+.+.}-{4:4}, at: kernfs_fop_write_iter+0x13e/0x260
 #2: 00000277beed8c18 (kn->active#339){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x164/0x260
 #3: 00000277e9859190 (&dev->mutex){....}-{4:4}, at: pci_dev_lock+0x2e/0x40
 #4: 00000383068a7708 (pci_lock){....}-{2:2}, at: pci_bus_read_config_dword+0x4a/0xb0
stack backtrace:
CPU: 6 UID: 0 PID: 3833 Comm: bash Kdump: loaded Not tainted 6.19.0-devel #18 PREEMPTLAZY
Hardware name: IBM 9175 ME1 701 (LPAR)
Call Trace:
 [<00000383048afec2>] dump_stack_lvl+0xa2/0xe8
 [<00000383049ba166>] __lock_acquire+0x816/0x1660
 [<00000383049bb1fa>] lock_acquire+0x24a/0x370
 [<00000383059e3860>] _raw_spin_lock_irqsave+0x70/0xc0
 [<00000383048bbb6c>] debug_event_common+0xfc/0x300
 [<0000038304900b0a>] __zpci_load+0x17a/0x1f0
 [<00000383048fad88>] pci_read+0x88/0xd0
 [<00000383054cbce0>] pci_bus_read_config_dword+0x70/0xb0
 [<00000383054d55e4>] pci_dev_wait+0x174/0x290
 [<00000383054d5a3e>] __pci_reset_function_locked+0xfe/0x170
 [<00000383054d9b30>] pci_reset_function+0xd0/0x100
 [<00000383054ee21a>] reset_store+0x5a/0x80
 [<0000038304e98758>] kernfs_fop_write_iter+0x1e8/0x260
 [<0000038304d995da>] new_sync_write+0x13a/0x180
 [<0000038304d9c5d0>] vfs_write+0x200/0x330
 [<0000038304d9c88c>] ksys_write+0x7c/0xf0
 [<00000383059cfa80>] __do_syscall+0x210/0x500
 [<00000383059e4c06>] system_call+0x6e/0x90
INFO: lockdep is turned off.

=============================
[ BUG: Invalid wait context ]
6.19.0-devel #3 Not tainted
-----------------------------
bash/6861 is trying to lock:
0000009da05c7430 (&rc->lock){-.-.}-{3:3}, at: debug_event_common+0xfc/0x300
other info that might help us debug this:
context-{5:5}
5 locks held by bash/6861:
 #0: 000000acff404450 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x7c/0xf0
 #1: 000000acff41c490 (&of->mutex#2){+.+.}-{4:4}, at: kernfs_fop_write_iter+0x13e/0x260
 #2: 0000009da36937d8 (kn->active#75){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x164/0x260
 #3: 0000009dd15250d0 (&zdev->state_lock){+.+.}-{4:4}, at: enable_slot+0x2e/0xc0
 #4: 000001a19682f708 (pci_lock){....}-{2:2}, at: pci_bus_read_config_byte+0x42/0xa0
stack backtrace:
CPU: 16 UID: 0 PID: 6861 Comm: bash Kdump: loaded Not tainted 6.19.0-devel #3 PREEMPTLAZY
Hardware name: IBM 9175 ME1 701 (LPAR)
Call Trace:
 [<000001a194837ec2>] dump_stack_lvl+0xa2/0xe8
 [<000001a194942166>] __lock_acquire+0x816/0x1660
 [<000001a1949431fa>] lock_acquire+0x24a/0x370
 [<000001a19596b810>] _raw_spin_lock_irqsave+0x70/0xc0
 [<000001a194843b6c>] debug_event_common+0xfc/0x300
 [<000001a194888b0a>] __zpci_load+0x17a/0x1f0
 [<000001a194882d88>] pci_read+0x88/0xd0
 [<000001a195453b88>] pci_bus_read_config_byte+0x68/0xa0
 [<000001a195457bc2>] pci_setup_device+0x62/0xad0
 [<000001a195458e70>] pci_scan_single_device+0x90/0xe0
 [<000001a19488a0f6>] zpci_bus_scan_device+0x46/0x80
 [<000001a19547f958>] enable_slot+0x98/0xc0
 [<000001a19547f134>] power_write_file+0xc4/0x110
 [<000001a194e20758>] kernfs_fop_write_iter+0x1e8/0x260
 [<000001a194d215da>] new_sync_write+0x13a/0x180
 [<000001a194d245d0>] vfs_write+0x200/0x330
 [<000001a194d2488c>] ksys_write+0x7c/0xf0
 [<000001a195957a30>] __do_syscall+0x210/0x500
 [<000001a19596cbb6>] system_call+0x6e/0x90
INFO: lockdep is turned off.

Since it is desired to keep it possible to create trace records in most
situations, including this particular case (failing PCI config space
accesses are relevant), convert the used spinlock_t in `struct
debug_info` to raw_spinlock_t.

The impact is small, as the debug area lock only protects bounded memory
access without external dependencies, apart from one function
debug_set_size() where kfree() is implicitly called with the lock held.
Move debug_info_free() out of this lock, to keep remove this external
dependency.

Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2026-02-18 15:22:59 +01:00
Heiko Carstens 3ee5333fee s390/smp: Avoid calling rebuild_sched_domains() early
Since a recent cpuset code change [1] the kernel emits warnings like this:

WARNING: kernel/cgroup/cpuset.c:966 at rebuild_sched_domains_locked+0xe0/0x120, CPU#0: kworker/0:0/9
Modules linked in:
CPU: 0 UID: 0 PID: 9 Comm: kworker/0:0 Not tainted 6.20.0-20260215.rc0.git3.bb7a3fc2c976.300.fc43.s390x+git #1 PREEMPTLAZY
Hardware name: IBM 3931 A01 703 (KVM/Linux)
Workqueue: events topology_work_fn
Krnl PSW : 0704c00180000000 000002922e7af5c4 (rebuild_sched_domains_locked+0xe4/0x120)
...
Call Trace:
 [<000002922e7af5c4>] rebuild_sched_domains_locked+0xe4/0x120
 [<000002922e7af634>] rebuild_sched_domains+0x34/0x50
 [<000002922e6ba232>] process_one_work+0x1b2/0x490
 [<000002922e6bc4b8>] worker_thread+0x1f8/0x3b0
 [<000002922e6c6a98>] kthread+0x148/0x170
 [<000002922e645ffc>] __ret_from_fork+0x3c/0x240
 [<000002922f51f492>] ret_from_fork+0xa/0x30

Reason for this is that the s390 specific smp initialization code schedules
a work which rebuilds scheduling domains way before the scheduler is smp
aware. With the mentioned commit the (invalid) rebuild request is not
anymore silently discarded but instead leads to warning.

Address this by avoiding the early rebuild request.

Reported-by: Marc Hartmayer <marc@linux.ibm.com>
Tested-by: Marc Hartmayer <marc@linux.ibm.com>
Fixes: 6ee43047e8 ("cpuset: Remove unnecessary checks in rebuild_sched_domains_locked") [1]
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2026-02-17 15:49:04 +01:00
Linus Torvalds cb5573868e Loongarch:
- Add more CPUCFG mask bits.
 
 - Improve feature detection.
 
 - Add lazy load support for FPU and binary translation (LBT) register state.
 
 - Fix return value for memory reads from and writes to in-kernel devices.
 
 - Add support for detecting preemption from within a guest.
 
 - Add KVM steal time test case to tools/selftests.
 
 ARM:
 
 - Add support for FEAT_IDST, allowing ID registers that are not
   implemented to be reported as a normal trap rather than as an UNDEF
   exception.
 
 - Add sanitisation of the VTCR_EL2 register, fixing a number of
   UXN/PXN/XN bugs in the process.
 
 - Full handling of RESx bits, instead of only RES0, and resulting in
   SCTLR_EL2 being added to the list of sanitised registers.
 
 - More pKVM fixes for features that are not supposed to be exposed to
   guests.
 
 - Make sure that MTE being disabled on the pKVM host doesn't give it
   the ability to attack the hypervisor.
 
 - Allow pKVM's host stage-2 mappings to use the Force Write Back
   version of the memory attributes by using the "pass-through'
   encoding.
 
 - Fix trapping of ICC_DIR_EL1 on GICv5 hosts emulating GICv3 for the
   guest.
 
 - Preliminary work for guest GICv5 support.
 
 - A bunch of debugfs fixes, removing pointless custom iterators stored
   in guest data structures.
 
 - A small set of FPSIMD cleanups.
 
 - Selftest fixes addressing the incorrect alignment of page
   allocation.
 
 - Other assorted low-impact fixes and spelling fixes.
 
 RISC-V:
 
 - Fixes for issues discoverd by KVM API fuzzing in
   kvm_riscv_aia_imsic_has_attr(), kvm_riscv_aia_imsic_rw_attr(),
   and kvm_riscv_vcpu_aia_imsic_update()
 
 - Allow Zalasr, Zilsd and Zclsd extensions for Guest/VM
 
 - Transparent huge page support for hypervisor page tables
 
 - Adjust the number of available guest irq files based on MMIO
   register sizes found in the device tree or the ACPI tables
 
 - Add RISC-V specific paging modes to KVM selftests
 
 - Detect paging mode at runtime for selftests
 
 s390:
 
 - Performance improvement for vSIE (aka nested virtualization)
 
 - Completely new memory management.  s390 was a special snowflake that enlisted
   help from the architecture's page table management to build hypervisor
   page tables, in particular enabling sharing the last level of page
   tables.  This however was a lot of code (~3K lines) in order to support
   KVM, and also blocked several features.  The biggest advantages is
   that the page size of userspace is completely independent of the
   page size used by the guest: userspace can mix normal pages, THPs and
   hugetlbfs as it sees fit, and in fact transparent hugepages were not
   possible before.  It's also now possible to have nested guests and
   guests with huge pages running on the same host.
 
 - Maintainership change for s390 vfio-pci
 
 - Small quality of life improvement for protected guests
 
 x86:
 
 - Add support for giving the guest full ownership of PMU hardware (contexted
   switched around the fastpath run loop) and allowing direct access to data
   MSRs and PMCs (restricted by the vPMU model).  KVM still intercepts
   access to control registers, e.g. to enforce event filtering and to
   prevent the guest from profiling sensitive host state.  This is more
   accurate, since it has no risk of contention and thus dropped events, and
   also has significantly less overhead.
 
   For more information, see the commit message for merge commit bf2c3138ae
   ("Merge tag 'kvm-x86-pmu-6.20' of https://github.com/kvm-x86/linux into HEAD").
 
 - Disallow changing the virtual CPU model if L2 is active, for all the same
   reasons KVM disallows change the model after the first KVM_RUN.
 
 - Fix a bug where KVM would incorrectly reject host accesses to PV MSRs
   when running with KVM_CAP_ENFORCE_PV_FEATURE_CPUID enabled, even if those
   were advertised as supported to userspace,
 
 - Fix a bug with protected guest state (SEV-ES/SNP and TDX) VMs, where KVM
   would attempt to read CR3 configuring an async #PF entry.
 
 - Fail the build if EXPORT_SYMBOL_GPL or EXPORT_SYMBOL is used in KVM (for x86
   only) to enforce usage of EXPORT_SYMBOL_FOR_KVM_INTERNAL.  Only a few exports
   that are intended for external usage, and those are allowed explicitly.
 
 - When checking nested events after a vCPU is unblocked, ignore -EBUSY instead
   of WARNing.  Userspace can sometimes put the vCPU into what should be an
   impossible state, and spurious exit to userspace on -EBUSY does not really
   do anything to solve the issue.
 
 - Also throw in the towel and drop the WARN on INIT/SIPI being blocked when vCPU
   is in Wait-For-SIPI, which also resulted in playing whack-a-mole with syzkaller
   stuffing architecturally impossible states into KVM.
 
 - Add support for new Intel instructions that don't require anything beyond
   enumerating feature flags to userspace.
 
 - Grab SRCU when reading PDPTRs in KVM_GET_SREGS2.
 
 - Add WARNs to guard against modifying KVM's CPU caps outside of the intended
   setup flow, as nested VMX in particular is sensitive to unexpected changes
   in KVM's golden configuration.
 
 - Add a quirk to allow userspace to opt-in to actually suppress EOI broadcasts
   when the suppression feature is enabled by the guest (currently limited to
   split IRQCHIP, i.e. userspace I/O APIC).  Sadly, simply fixing KVM to honor
   Suppress EOI Broadcasts isn't an option as some userspaces have come to rely
   on KVM's buggy behavior (KVM advertises Supress EOI Broadcast irrespective
   of whether or not userspace I/O APIC supports Directed EOIs).
 
 - Clean up KVM's handling of marking mapped vCPU pages dirty.
 
 - Drop a pile of *ancient* sanity checks hidden behind in KVM's unused
   ASSERT() macro, most of which could be trivially triggered by the guest
   and/or user, and all of which were useless.
 
 - Fold "struct dest_map" into its sole user, "struct rtc_status", to make it
   more obvious what the weird parameter is used for, and to allow fropping
   these RTC shenanigans if CONFIG_KVM_IOAPIC=n.
 
 - Bury all of ioapic.h, i8254.h and related ioctls (including
   KVM_CREATE_IRQCHIP) behind CONFIG_KVM_IOAPIC=y.
 
 - Add a regression test for recent APICv update fixes.
 
 - Handle "hardware APIC ISR", a.k.a. SVI, updates in kvm_apic_update_apicv()
   to consolidate the updates, and to co-locate SVI updates with the updates
   for KVM's own cache of ISR information.
 
 - Drop a dead function declaration.
 
 - Minor cleanups.
 
 x86 (Intel):
 
 - Rework KVM's handling of VMCS updates while L2 is active to temporarily
   switch to vmcs01 instead of deferring the update until the next nested
   VM-Exit.  The deferred updates approach directly contributed to several
   bugs, was proving to be a maintenance burden due to the difficulty in
   auditing the correctness of deferred updates, and was polluting
   "struct nested_vmx" with a growing pile of booleans.
 
 - Fix an SGX bug where KVM would incorrectly try to handle EPCM page faults,
   and instead always reflect them into the guest.  Since KVM doesn't shadow
   EPCM entries, EPCM violations cannot be due to KVM interference and
   can't be resolved by KVM.
 
 - Fix a bug where KVM would register its posted interrupt wakeup handler even
   if loading kvm-intel.ko ultimately failed.
 
 - Disallow access to vmcb12 fields that aren't fully supported, mostly to
   avoid weirdness and complexity for FRED and other features, where KVM wants
   enable VMCS shadowing for fields that conditionally exist.
 
 - Print out the "bad" offsets and values if kvm-intel.ko refuses to load (or
   refuses to online a CPU) due to a VMCS config mismatch.
 
 x86 (AMD):
 
 - Drop a user-triggerable WARN on nested_svm_load_cr3() failure.
 
 - Add support for virtualizing ERAPS.  Note, correct virtualization of ERAPS
   relies on an upcoming, publicly announced change in the APM to reduce the
   set of conditions where hardware (i.e. KVM) *must* flush the RAP.
 
 - Ignore nSVM intercepts for instructions that are not supported according to
   L1's virtual CPU model.
 
 - Add support for expedited writes to the fast MMIO bus, a la VMX's fastpath
   for EPT Misconfig.
 
 - Don't set GIF when clearing EFER.SVME, as GIF exists independently of SVM,
   and allow userspace to restore nested state with GIF=0.
 
 - Treat exit_code as an unsigned 64-bit value through all of KVM.
 
 - Add support for fetching SNP certificates from userspace.
 
 - Fix a bug where KVM would use vmcb02 instead of vmcb01 when emulating VMLOAD
   or VMSAVE on behalf of L2.
 
 - Misc fixes and cleanups.
 
 x86 selftests:
 
 - Add a regression test for TPR<=>CR8 synchronization and IRQ masking.
 
 - Overhaul selftest's MMU infrastructure to genericize stage-2 MMU support,
   and extend x86's infrastructure to support EPT and NPT (for L2 guests).
 
 - Extend several nested VMX tests to also cover nested SVM.
 
 - Add a selftest for nested VMLOAD/VMSAVE.
 
 - Rework the nested dirty log test, originally added as a regression test for
   PML where KVM logged L2 GPAs instead of L1 GPAs, to improve test coverage
   and to hopefully make the test easier to understand and maintain.
 
 guest_memfd:
 
 - Remove kvm_gmem_populate()'s preparation tracking and half-baked hugepage
   handling.  SEV/SNP was the only user of the tracking and it can do it via
   the RMP.
 
 - Retroactively document and enforce (for SNP) that KVM_SEV_SNP_LAUNCH_UPDATE
   and KVM_TDX_INIT_MEM_REGION require the source page to be 4KiB aligned, to
   avoid non-trivial complexity for something that no known VMM seems to be
   doing and to avoid an API special case for in-place conversion, which
   simply can't support unaligned sources.
 
 - When populating guest_memfd memory, GUP the source page in common code and
   pass the refcounted page to the vendor callback, instead of letting vendor
   code do the heavy lifting.  Doing so avoids a looming deadlock bug with
   in-place due an AB-BA conflict betwee mmap_lock and guest_memfd's filemap
   invalidate lock.
 
 Generic:
 
 - Fix a bug where KVM would ignore the vCPU's selected address space when
   creating a vCPU-specific mapping of guest memory.  Actually this bug
   could not be hit even on x86, the only architecture with multiple
   address spaces, but it's a bug nevertheless.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmmNqwwUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroPaZAf/cJx5B67lnST272esz0j29MIuT/Ti
 jnf6PI9b7XubKYOtNvlu5ZW4Jsa5dqRG0qeO/JmcXDlwBf5/UkWOyvqIXyiuTl0l
 KcSUlKPtTgKZSoZpJpTppuuDE8FSYqEdcCmjNvoYzcJoPjmaeJbK6aqO0AkBbb6e
 L5InrLV7nV9iua6rFvA0s/G8/Eq2DG8M9hTRHe6NcI/z4hvslOudvpUXtC8Jygoo
 cV8vFavUwc+atrmvhAOLvSitnrjfNa4zcG6XMOlwXPfIdvi3zqTlQTgUpwGKiAGQ
 RIDUVZ/9bcWgJqbPRsdEWwaYRkNQWc5nmrAHRpEEaYV/NeBBNf4v6qfKSw==
 =SkJ1
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
 "Loongarch:

   - Add more CPUCFG mask bits

   - Improve feature detection

   - Add lazy load support for FPU and binary translation (LBT) register
     state

   - Fix return value for memory reads from and writes to in-kernel
     devices

   - Add support for detecting preemption from within a guest

   - Add KVM steal time test case to tools/selftests

  ARM:

   - Add support for FEAT_IDST, allowing ID registers that are not
     implemented to be reported as a normal trap rather than as an UNDEF
     exception

   - Add sanitisation of the VTCR_EL2 register, fixing a number of
     UXN/PXN/XN bugs in the process

   - Full handling of RESx bits, instead of only RES0, and resulting in
     SCTLR_EL2 being added to the list of sanitised registers

   - More pKVM fixes for features that are not supposed to be exposed to
     guests

   - Make sure that MTE being disabled on the pKVM host doesn't give it
     the ability to attack the hypervisor

   - Allow pKVM's host stage-2 mappings to use the Force Write Back
     version of the memory attributes by using the "pass-through'
     encoding

   - Fix trapping of ICC_DIR_EL1 on GICv5 hosts emulating GICv3 for the
     guest

   - Preliminary work for guest GICv5 support

   - A bunch of debugfs fixes, removing pointless custom iterators
     stored in guest data structures

   - A small set of FPSIMD cleanups

   - Selftest fixes addressing the incorrect alignment of page
     allocation

   - Other assorted low-impact fixes and spelling fixes

  RISC-V:

   - Fixes for issues discoverd by KVM API fuzzing in
     kvm_riscv_aia_imsic_has_attr(), kvm_riscv_aia_imsic_rw_attr(), and
     kvm_riscv_vcpu_aia_imsic_update()

   - Allow Zalasr, Zilsd and Zclsd extensions for Guest/VM

   - Transparent huge page support for hypervisor page tables

   - Adjust the number of available guest irq files based on MMIO
     register sizes found in the device tree or the ACPI tables

   - Add RISC-V specific paging modes to KVM selftests

   - Detect paging mode at runtime for selftests

  s390:

   - Performance improvement for vSIE (aka nested virtualization)

   - Completely new memory management. s390 was a special snowflake that
     enlisted help from the architecture's page table management to
     build hypervisor page tables, in particular enabling sharing the
     last level of page tables. This however was a lot of code (~3K
     lines) in order to support KVM, and also blocked several features.
     The biggest advantages is that the page size of userspace is
     completely independent of the page size used by the guest:
     userspace can mix normal pages, THPs and hugetlbfs as it sees fit,
     and in fact transparent hugepages were not possible before. It's
     also now possible to have nested guests and guests with huge pages
     running on the same host

   - Maintainership change for s390 vfio-pci

   - Small quality of life improvement for protected guests

  x86:

   - Add support for giving the guest full ownership of PMU hardware
     (contexted switched around the fastpath run loop) and allowing
     direct access to data MSRs and PMCs (restricted by the vPMU model).

     KVM still intercepts access to control registers, e.g. to enforce
     event filtering and to prevent the guest from profiling sensitive
     host state. This is more accurate, since it has no risk of
     contention and thus dropped events, and also has significantly less
     overhead.

     For more information, see the commit message for merge commit
     bf2c3138ae ("Merge tag 'kvm-x86-pmu-6.20' ...")

   - Disallow changing the virtual CPU model if L2 is active, for all
     the same reasons KVM disallows change the model after the first
     KVM_RUN

   - Fix a bug where KVM would incorrectly reject host accesses to PV
     MSRs when running with KVM_CAP_ENFORCE_PV_FEATURE_CPUID enabled,
     even if those were advertised as supported to userspace,

   - Fix a bug with protected guest state (SEV-ES/SNP and TDX) VMs,
     where KVM would attempt to read CR3 configuring an async #PF entry

   - Fail the build if EXPORT_SYMBOL_GPL or EXPORT_SYMBOL is used in KVM
     (for x86 only) to enforce usage of EXPORT_SYMBOL_FOR_KVM_INTERNAL.
     Only a few exports that are intended for external usage, and those
     are allowed explicitly

   - When checking nested events after a vCPU is unblocked, ignore
     -EBUSY instead of WARNing. Userspace can sometimes put the vCPU
     into what should be an impossible state, and spurious exit to
     userspace on -EBUSY does not really do anything to solve the issue

   - Also throw in the towel and drop the WARN on INIT/SIPI being
     blocked when vCPU is in Wait-For-SIPI, which also resulted in
     playing whack-a-mole with syzkaller stuffing architecturally
     impossible states into KVM

   - Add support for new Intel instructions that don't require anything
     beyond enumerating feature flags to userspace

   - Grab SRCU when reading PDPTRs in KVM_GET_SREGS2

   - Add WARNs to guard against modifying KVM's CPU caps outside of the
     intended setup flow, as nested VMX in particular is sensitive to
     unexpected changes in KVM's golden configuration

   - Add a quirk to allow userspace to opt-in to actually suppress EOI
     broadcasts when the suppression feature is enabled by the guest
     (currently limited to split IRQCHIP, i.e. userspace I/O APIC).
     Sadly, simply fixing KVM to honor Suppress EOI Broadcasts isn't an
     option as some userspaces have come to rely on KVM's buggy behavior
     (KVM advertises Supress EOI Broadcast irrespective of whether or
     not userspace I/O APIC supports Directed EOIs)

   - Clean up KVM's handling of marking mapped vCPU pages dirty

   - Drop a pile of *ancient* sanity checks hidden behind in KVM's
     unused ASSERT() macro, most of which could be trivially triggered
     by the guest and/or user, and all of which were useless

   - Fold "struct dest_map" into its sole user, "struct rtc_status", to
     make it more obvious what the weird parameter is used for, and to
     allow fropping these RTC shenanigans if CONFIG_KVM_IOAPIC=n

   - Bury all of ioapic.h, i8254.h and related ioctls (including
     KVM_CREATE_IRQCHIP) behind CONFIG_KVM_IOAPIC=y

   - Add a regression test for recent APICv update fixes

   - Handle "hardware APIC ISR", a.k.a. SVI, updates in
     kvm_apic_update_apicv() to consolidate the updates, and to
     co-locate SVI updates with the updates for KVM's own cache of ISR
     information

   - Drop a dead function declaration

   - Minor cleanups

  x86 (Intel):

   - Rework KVM's handling of VMCS updates while L2 is active to
     temporarily switch to vmcs01 instead of deferring the update until
     the next nested VM-Exit.

     The deferred updates approach directly contributed to several bugs,
     was proving to be a maintenance burden due to the difficulty in
     auditing the correctness of deferred updates, and was polluting
     "struct nested_vmx" with a growing pile of booleans

   - Fix an SGX bug where KVM would incorrectly try to handle EPCM page
     faults, and instead always reflect them into the guest. Since KVM
     doesn't shadow EPCM entries, EPCM violations cannot be due to KVM
     interference and can't be resolved by KVM

   - Fix a bug where KVM would register its posted interrupt wakeup
     handler even if loading kvm-intel.ko ultimately failed

   - Disallow access to vmcb12 fields that aren't fully supported,
     mostly to avoid weirdness and complexity for FRED and other
     features, where KVM wants enable VMCS shadowing for fields that
     conditionally exist

   - Print out the "bad" offsets and values if kvm-intel.ko refuses to
     load (or refuses to online a CPU) due to a VMCS config mismatch

  x86 (AMD):

   - Drop a user-triggerable WARN on nested_svm_load_cr3() failure

   - Add support for virtualizing ERAPS. Note, correct virtualization of
     ERAPS relies on an upcoming, publicly announced change in the APM
     to reduce the set of conditions where hardware (i.e. KVM) *must*
     flush the RAP

   - Ignore nSVM intercepts for instructions that are not supported
     according to L1's virtual CPU model

   - Add support for expedited writes to the fast MMIO bus, a la VMX's
     fastpath for EPT Misconfig

   - Don't set GIF when clearing EFER.SVME, as GIF exists independently
     of SVM, and allow userspace to restore nested state with GIF=0

   - Treat exit_code as an unsigned 64-bit value through all of KVM

   - Add support for fetching SNP certificates from userspace

   - Fix a bug where KVM would use vmcb02 instead of vmcb01 when
     emulating VMLOAD or VMSAVE on behalf of L2

   - Misc fixes and cleanups

  x86 selftests:

   - Add a regression test for TPR<=>CR8 synchronization and IRQ masking

   - Overhaul selftest's MMU infrastructure to genericize stage-2 MMU
     support, and extend x86's infrastructure to support EPT and NPT
     (for L2 guests)

   - Extend several nested VMX tests to also cover nested SVM

   - Add a selftest for nested VMLOAD/VMSAVE

   - Rework the nested dirty log test, originally added as a regression
     test for PML where KVM logged L2 GPAs instead of L1 GPAs, to
     improve test coverage and to hopefully make the test easier to
     understand and maintain

  guest_memfd:

   - Remove kvm_gmem_populate()'s preparation tracking and half-baked
     hugepage handling. SEV/SNP was the only user of the tracking and it
     can do it via the RMP

   - Retroactively document and enforce (for SNP) that
     KVM_SEV_SNP_LAUNCH_UPDATE and KVM_TDX_INIT_MEM_REGION require the
     source page to be 4KiB aligned, to avoid non-trivial complexity for
     something that no known VMM seems to be doing and to avoid an API
     special case for in-place conversion, which simply can't support
     unaligned sources

   - When populating guest_memfd memory, GUP the source page in common
     code and pass the refcounted page to the vendor callback, instead
     of letting vendor code do the heavy lifting. Doing so avoids a
     looming deadlock bug with in-place due an AB-BA conflict betwee
     mmap_lock and guest_memfd's filemap invalidate lock

  Generic:

   - Fix a bug where KVM would ignore the vCPU's selected address space
     when creating a vCPU-specific mapping of guest memory. Actually
     this bug could not be hit even on x86, the only architecture with
     multiple address spaces, but it's a bug nevertheless"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (267 commits)
  KVM: s390: Increase permitted SE header size to 1 MiB
  MAINTAINERS: Replace backup for s390 vfio-pci
  KVM: s390: vsie: Fix race in acquire_gmap_shadow()
  KVM: s390: vsie: Fix race in walk_guest_tables()
  KVM: s390: Use guest address to mark guest page dirty
  irqchip/riscv-imsic: Adjust the number of available guest irq files
  RISC-V: KVM: Transparent huge page support
  RISC-V: KVM: selftests: Add Zalasr extensions to get-reg-list test
  RISC-V: KVM: Allow Zalasr extensions for Guest/VM
  KVM: riscv: selftests: Add riscv vm satp modes
  KVM: riscv: selftests: add Zilsd and Zclsd extension to get-reg-list test
  riscv: KVM: allow Zilsd and Zclsd extensions for Guest/VM
  RISC-V: KVM: Skip IMSIC update if vCPU IMSIC state is not initialized
  RISC-V: KVM: Fix null pointer dereference in kvm_riscv_aia_imsic_rw_attr()
  RISC-V: KVM: Fix null pointer dereference in kvm_riscv_aia_imsic_has_attr()
  RISC-V: KVM: Remove unnecessary 'ret' assignment
  KVM: s390: Add explicit padding to struct kvm_s390_keyop
  KVM: LoongArch: selftests: Add steal time test case
  LoongArch: KVM: Add paravirt vcpu_is_preempted() support in guest side
  LoongArch: KVM: Add paravirt preempt feature in hypervisor side
  ...
2026-02-13 11:31:15 -08:00
Linus Torvalds 136114e0ab mm.git review status for linus..mm-nonmm-stable
Total patches:       107
 Reviews/patch:       1.07
 Reviewed rate:       67%
 
 - The 2 patch series "ocfs2: give ocfs2 the ability to reclaim
   suballocator free bg" from Heming Zhao saves disk space by teaching
   ocfs2 to reclaim suballocator block group space.
 
 - The 4 patch series "Add ARRAY_END(), and use it to fix off-by-one
   bugs" from Alejandro Colomar adds the ARRAY_END() macro and uses it in
   various places.
 
 - The 2 patch series "vmcoreinfo: support VMCOREINFO_BYTES larger than
   PAGE_SIZE" from Pnina Feder makes the vmcore code future-safe, if
   VMCOREINFO_BYTES ever exceeds the page size.
 
 - The 7 patch series "kallsyms: Prevent invalid access when showing
   module buildid" from Petr Mladek cleans up kallsyms code related to
   module buildid and fixes an invalid access crash when printing
   backtraces.
 
 - The 3 patch series "Address page fault in
   ima_restore_measurement_list()" from Harshit Mogalapalli fixes a
   kexec-related crash that can occur when booting the second-stage kernel
   on x86.
 
 - The 6 patch series "kho: ABI headers and Documentation updates" from
   Mike Rapoport updates the kexec handover ABI documentation.
 
 - The 4 patch series "Align atomic storage" from Finn Thain adds the
   __aligned attribute to atomic_t and atomic64_t definitions to get
   natural alignment of both types on csky, m68k, microblaze, nios2,
   openrisc and sh.
 
 - The 2 patch series "kho: clean up page initialization logic" from
   Pratyush Yadav simplifies the page initialization logic in
   kho_restore_page().
 
 - The 6 patch series "Unload linux/kernel.h" from Yury Norov moves
   several things out of kernel.h and into more appropriate places.
 
 - The 7 patch series "don't abuse task_struct.group_leader" from Oleg
   Nesterov removes the usage of ->group_leader when it is "obviously
   unnecessary".
 
 - The 5 patch series "list private v2 & luo flb" from Pasha Tatashin
   adds some infrastructure improvements to the live update orchestrator.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaY4giAAKCRDdBJ7gKXxA
 jgusAQDnKkP8UWTqXPC1jI+OrDJGU5ciAx8lzLeBVqMKzoYk9AD/TlhT2Nlx+Ef6
 0HCUHUD0FMvAw/7/Dfc6ZKxwBEIxyww=
 =mmsH
 -----END PGP SIGNATURE-----

Merge tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull non-MM updates from Andrew Morton:

 - "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
   disk space by teaching ocfs2 to reclaim suballocator block group
   space (Heming Zhao)

 - "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
   ARRAY_END() macro and uses it in various places (Alejandro Colomar)

 - "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
   the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
   page size (Pnina Feder)

 - "kallsyms: Prevent invalid access when showing module buildid" cleans
   up kallsyms code related to module buildid and fixes an invalid
   access crash when printing backtraces (Petr Mladek)

 - "Address page fault in ima_restore_measurement_list()" fixes a
   kexec-related crash that can occur when booting the second-stage
   kernel on x86 (Harshit Mogalapalli)

 - "kho: ABI headers and Documentation updates" updates the kexec
   handover ABI documentation (Mike Rapoport)

 - "Align atomic storage" adds the __aligned attribute to atomic_t and
   atomic64_t definitions to get natural alignment of both types on
   csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)

 - "kho: clean up page initialization logic" simplifies the page
   initialization logic in kho_restore_page() (Pratyush Yadav)

 - "Unload linux/kernel.h" moves several things out of kernel.h and into
   more appropriate places (Yury Norov)

 - "don't abuse task_struct.group_leader" removes the usage of
   ->group_leader when it is "obviously unnecessary" (Oleg Nesterov)

 - "list private v2 & luo flb" adds some infrastructure improvements to
   the live update orchestrator (Pasha Tatashin)

* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
  watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
  procfs: fix missing RCU protection when reading real_parent in do_task_stat()
  watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
  kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
  kho: fix doc for kho_restore_pages()
  tests/liveupdate: add in-kernel liveupdate test
  liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
  liveupdate: luo_file: Use private list
  list: add kunit test for private list primitives
  list: add primitives for private list manipulations
  delayacct: fix uapi timespec64 definition
  panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
  netclassid: use thread_group_leader(p) in update_classid_task()
  RDMA/umem: don't abuse current->group_leader
  drm/pan*: don't abuse current->group_leader
  drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
  drm/amdgpu: don't abuse current->group_leader
  android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
  android/binder: don't abuse current->group_leader
  kho: skip memoryless NUMA nodes when reserving scratch areas
  ...
2026-02-12 12:13:01 -08:00
Linus Torvalds 4cff5c05e0 mm.git review status for linus..mm-stable
Everything:
 
 Total patches:       325
 Reviews/patch:       1.39
 Reviewed rate:       72%
 
 Excluding DAMON:
 
 Total patches:       262
 Reviews/patch:       1.63
 Reviewed rate:       82%
 
 Excluding DAMON and zram:
 
 Total patches:       248
 Reviews/patch:       1.72
 Reviewed rate:       86%
 
 - The 14 patch series "powerpc/64s: do not re-activate batched TLB
   flush" from Alexander Gordeev makes arch_{enter|leave}_lazy_mmu_mode()
   nest properly.
 
   It adds a generic enter/leave layer and switches architectures to use
   it.  Various hacks were removed in the process.
 
 - The 7 patch series "zram: introduce compressed data writeback" from
   Richard Chang and Sergey Senozhatsky implements data compression for
   zram writeback.
 
 - The 8 patch series "mm: folio_zero_user: clear page ranges" from David
   Hildenbrand adds clearing of contiguous page ranges for hugepages.
   Large improvements during demand faulting are demonstrated.
 
 - The 2 patch series "memcg cleanups" from Chen Ridong tideis up some
   memcg code.
 
 - The 12 patch series "mm/damon: introduce {,max_}nr_snapshots and
   tracepoint for damos stats" from SeongJae Park improves DAMOS stat's
   provided information, deterministic control, and readability.
 
 - The 3 patch series "selftests/mm: hugetlb cgroup charging: robustness
   fixes" from Li Wang fixes a few issues in the hugetlb cgroup charging
   selftests.
 
 - The 5 patch series "Fix va_high_addr_switch.sh test failure - again"
   from Chunyu Hu addresses several issues in the va_high_addr_switch test.
 
 - The 5 patch series "mm/damon/tests/core-kunit: extend existing test
   scenarios" from Shu Anzai improves the KUnit test coverage for DAMON.
 
 - The 2 patch series "mm/khugepaged: fix dirty page handling for
   MADV_COLLAPSE" from Shivank Garg fixes a glitch in khugepaged which was
   causing madvise(MADV_COLLAPSE) to transiently return -EAGAIN.
 
 - The 29 patch series "arch, mm: consolidate hugetlb early reservation"
   from Mike Rapoport reworks and consolidates a pile of straggly code
   related to reservation of hugetlb memory from bootmem and creation of
   CMA areas for hugetlb.
 
 - The 9 patch series "mm: clean up anon_vma implementation" from Lorenzo
   Stoakes cleans up the anon_vma implementation in various ways.
 
 - The 3 patch series "tweaks for __alloc_pages_slowpath()" from
   Vlastimil Babka does a little streamlining of the page allocator's
   slowpath code.
 
 - The 8 patch series "memcg: separate private and public ID namespaces"
   from Shakeel Butt cleans up the memcg ID code and prevents the
   internal-only private IDs from being exposed to userspace.
 
 - The 6 patch series "mm: hugetlb: allocate frozen gigantic folio" from
   Kefeng Wang cleans up the allocation of frozen folios and avoids some
   atomic refcount operations.
 
 - The 11 patch series "mm/damon: advance DAMOS-based LRU sorting" from
   SeongJae Park improves DAMOS's movement of memory betewwn the active and
   inactive LRUs and adds auto-tuning of the ratio-based quotas and of
   monitoring intervals.
 
 - The 18 patch series "Support page table check on PowerPC" from Andrew
   Donnellan makes CONFIG_PAGE_TABLE_CHECK_ENFORCED work on powerpc.
 
 - The 3 patch series "nodemask: align nodes_and{,not} with underlying
   bitmap ops" from Yury Norov makes nodes_and() and nodes_andnot()
   propagate the return values from the underlying bit operations, enabling
   some cleanup in calling code.
 
 - The 5 patch series "mm/damon: hide kdamond and kdamond_lock from API
   callers" from SeongJae Park cleans up some DAMON internal interfaces.
 
 - The 4 patch series "mm/khugepaged: cleanups and scan limit fix" from
   Shivank Garg does some cleanup work in khupaged and fixes a scan limit
   accounting issue.
 
 - The 24 patch series "mm: balloon infrastructure cleanups" from David
   Hildenbrand goes to town on the balloon infrastructure and its page
   migration function.  Mainly cleanups, also some locking simplification.
 
 - The 2 patch series "mm/vmscan: add tracepoint and reason for
   kswapd_failures reset" from Jiayuan Chen adds additional tracepoints to
   the page reclaim code.
 
 - The 3 patch series "Replace wq users and add WQ_PERCPU to
   alloc_workqueue() users" from Marco Crivellari is part of Marco's
   kernel-wide migration from the legacy workqueue APIs over to the
   preferred unbound workqueues.
 
 - The 9 patch series "Various mm kselftests improvements/fixes" from
   Kevin Brodsky provides various unrelated improvements/fixes for the mm
   kselftests.
 
 - The 5 patch series "mm: accelerate gigantic folio allocation" from
   Kefeng Wang greatly speeds up gigantic folio allocation, mainly by
   avoiding unnecessary work in pfn_range_valid_contig().
 
 - The 5 patch series "selftests/damon: improve leak detection and wss
   estimation reliability" from SeongJae Park improves the reliability of
   two of the DAMON selftests.
 
 - The 8 patch series "mm/damon: cleanup kdamond, damon_call(), damos
   filter and DAMON_MIN_REGION" from SeongJae Park does some cleanup work
   in the core DAMON code.
 
 - The 8 patch series "Docs/mm/damon: update intro, modules, maintainer
   profile, and misc" from SeongJae Park performs maintenance work on the
   DAMON documentation.
 
 - The 10 patch series "mm: add and use vma_assert_stabilised() helper"
   from Lorenzo Stoakes refactors and cleans up the core VMA code.  The
   main aim here is to be able to use the mmap write lock's lockdep state
   to perform various assertions regarding the locking which the VMA code
   requires.
 
 - The 19 patch series "mm, swap: swap table phase II: unify swapin use"
   from Kairui Song removes some old swap code (swap cache bypassing and
   swap synchronization) which wasn't working very well.  Various other
   cleanups and simplifications were made.  The end result is a 20% speedup
   in one benchmark.
 
 - The 8 patch series "enable PT_RECLAIM on more 64-bit architectures"
   from Qi Zheng makes PT_RECLAIM available on 64-bit alpha, loongarch,
   mips, parisc, um,  Various cleanups were performed along the way.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaY1HfAAKCRDdBJ7gKXxA
 jqhZAP9H8ZlKKqCEgnr6U5XXmJ63Ep2FDQpl8p35yr9yVuU9+gEAgfyWiJ43l1fP
 rT0yjsUW3KQFBi/SEA3R6aYarmoIBgI=
 =+HLt
 -----END PGP SIGNATURE-----

Merge tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull MM updates from Andrew Morton:

 - "powerpc/64s: do not re-activate batched TLB flush" makes
   arch_{enter|leave}_lazy_mmu_mode() nest properly (Alexander Gordeev)

   It adds a generic enter/leave layer and switches architectures to use
   it. Various hacks were removed in the process.

 - "zram: introduce compressed data writeback" implements data
   compression for zram writeback (Richard Chang and Sergey Senozhatsky)

 - "mm: folio_zero_user: clear page ranges" adds clearing of contiguous
   page ranges for hugepages. Large improvements during demand faulting
   are demonstrated (David Hildenbrand)

 - "memcg cleanups" tidies up some memcg code (Chen Ridong)

 - "mm/damon: introduce {,max_}nr_snapshots and tracepoint for damos
   stats" improves DAMOS stat's provided information, deterministic
   control, and readability (SeongJae Park)

 - "selftests/mm: hugetlb cgroup charging: robustness fixes" fixes a few
   issues in the hugetlb cgroup charging selftests (Li Wang)

 - "Fix va_high_addr_switch.sh test failure - again" addresses several
   issues in the va_high_addr_switch test (Chunyu Hu)

 - "mm/damon/tests/core-kunit: extend existing test scenarios" improves
   the KUnit test coverage for DAMON (Shu Anzai)

 - "mm/khugepaged: fix dirty page handling for MADV_COLLAPSE" fixes a
   glitch in khugepaged which was causing madvise(MADV_COLLAPSE) to
   transiently return -EAGAIN (Shivank Garg)

 - "arch, mm: consolidate hugetlb early reservation" reworks and
   consolidates a pile of straggly code related to reservation of
   hugetlb memory from bootmem and creation of CMA areas for hugetlb
   (Mike Rapoport)

 - "mm: clean up anon_vma implementation" cleans up the anon_vma
   implementation in various ways (Lorenzo Stoakes)

 - "tweaks for __alloc_pages_slowpath()" does a little streamlining of
   the page allocator's slowpath code (Vlastimil Babka)

 - "memcg: separate private and public ID namespaces" cleans up the
   memcg ID code and prevents the internal-only private IDs from being
   exposed to userspace (Shakeel Butt)

 - "mm: hugetlb: allocate frozen gigantic folio" cleans up the
   allocation of frozen folios and avoids some atomic refcount
   operations (Kefeng Wang)

 - "mm/damon: advance DAMOS-based LRU sorting" improves DAMOS's movement
   of memory betewwn the active and inactive LRUs and adds auto-tuning
   of the ratio-based quotas and of monitoring intervals (SeongJae Park)

 - "Support page table check on PowerPC" makes
   CONFIG_PAGE_TABLE_CHECK_ENFORCED work on powerpc (Andrew Donnellan)

 - "nodemask: align nodes_and{,not} with underlying bitmap ops" makes
   nodes_and() and nodes_andnot() propagate the return values from the
   underlying bit operations, enabling some cleanup in calling code
   (Yury Norov)

 - "mm/damon: hide kdamond and kdamond_lock from API callers" cleans up
   some DAMON internal interfaces (SeongJae Park)

 - "mm/khugepaged: cleanups and scan limit fix" does some cleanup work
   in khupaged and fixes a scan limit accounting issue (Shivank Garg)

 - "mm: balloon infrastructure cleanups" goes to town on the balloon
   infrastructure and its page migration function. Mainly cleanups, also
   some locking simplification (David Hildenbrand)

 - "mm/vmscan: add tracepoint and reason for kswapd_failures reset" adds
   additional tracepoints to the page reclaim code (Jiayuan Chen)

 - "Replace wq users and add WQ_PERCPU to alloc_workqueue() users" is
   part of Marco's kernel-wide migration from the legacy workqueue APIs
   over to the preferred unbound workqueues (Marco Crivellari)

 - "Various mm kselftests improvements/fixes" provides various unrelated
   improvements/fixes for the mm kselftests (Kevin Brodsky)

 - "mm: accelerate gigantic folio allocation" greatly speeds up gigantic
   folio allocation, mainly by avoiding unnecessary work in
   pfn_range_valid_contig() (Kefeng Wang)

 - "selftests/damon: improve leak detection and wss estimation
   reliability" improves the reliability of two of the DAMON selftests
   (SeongJae Park)

 - "mm/damon: cleanup kdamond, damon_call(), damos filter and
   DAMON_MIN_REGION" does some cleanup work in the core DAMON code
   (SeongJae Park)

 - "Docs/mm/damon: update intro, modules, maintainer profile, and misc"
   performs maintenance work on the DAMON documentation (SeongJae Park)

 - "mm: add and use vma_assert_stabilised() helper" refactors and cleans
   up the core VMA code. The main aim here is to be able to use the mmap
   write lock's lockdep state to perform various assertions regarding
   the locking which the VMA code requires (Lorenzo Stoakes)

 - "mm, swap: swap table phase II: unify swapin use" removes some old
   swap code (swap cache bypassing and swap synchronization) which
   wasn't working very well. Various other cleanups and simplifications
   were made. The end result is a 20% speedup in one benchmark (Kairui
   Song)

 - "enable PT_RECLAIM on more 64-bit architectures" makes PT_RECLAIM
   available on 64-bit alpha, loongarch, mips, parisc, and um. Various
   cleanups were performed along the way (Qi Zheng)

* tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (325 commits)
  mm/memory: handle non-split locks correctly in zap_empty_pte_table()
  mm: move pte table reclaim code to memory.c
  mm: make PT_RECLAIM depends on MMU_GATHER_RCU_TABLE_FREE
  mm: convert __HAVE_ARCH_TLB_REMOVE_TABLE to CONFIG_HAVE_ARCH_TLB_REMOVE_TABLE config
  um: mm: enable MMU_GATHER_RCU_TABLE_FREE
  parisc: mm: enable MMU_GATHER_RCU_TABLE_FREE
  mips: mm: enable MMU_GATHER_RCU_TABLE_FREE
  LoongArch: mm: enable MMU_GATHER_RCU_TABLE_FREE
  alpha: mm: enable MMU_GATHER_RCU_TABLE_FREE
  mm: change mm/pt_reclaim.c to use asm/tlb.h instead of asm-generic/tlb.h
  mm/damon/stat: remove __read_mostly from memory_idle_ms_percentiles
  zsmalloc: make common caches global
  mm: add SPDX id lines to some mm source files
  mm/zswap: use %pe to print error pointers
  mm/vmscan: use %pe to print error pointers
  mm/readahead: fix typo in comment
  mm: khugepaged: fix NR_FILE_PAGES and NR_SHMEM in collapse_file()
  mm: refactor vma_map_pages to use vm_insert_pages
  mm/damon: unify address range representation with damon_addr_range
  mm/cma: replace snprintf with strscpy in cma_new_area
  ...
2026-02-12 11:32:37 -08:00
Paolo Bonzini b1195183ed - gmap rewrite: completely new memory management for kvm/s390
- vSIE improvement
 - maintainership change for s390 vfio-pci
 - small quality of life improvement for protected guests
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEoWuZBM6M3lCBSfTnuARItAMU6BMFAmmLOKAACgkQuARItAMU
 6BOkhQ/9G0Sr1bfkcSQvbszvjSoDsOCSm+oAm39679Dr4v+7SsItknTutYK0M7dM
 n6oY2kU1dveFsF0FwBAALh4LC0lYNEmz34eHxaFPFfgqQ9lX2fBAQuBSPq8uOz1L
 Pk6IIlqTls8TAvKF/KqTXCEULnPGVXD2KP4WaSir+T2vZr6N/mqB7cZPR23/rMAi
 +PF/UtmgbfG+eRjqA8QRdm8nnzTrM5cWe9roZXYsAXDLZh+EYYeG4d96GFTV8udY
 /6mV1YKP0Aa+youC5p4oIh1Iv7p/Yjv6RxPoEbW1O31M9yBDJmFpz4W5C/rdkzwI
 nOjQj9i7ZINXf83kAZMvFb8MdXlJzaw8rBUlWzxNfrsL4ga8Rp3xMNEdufWd3T5x
 zNFXr0ANuBifi0B0EasBWlYDRbK4WGAC4vnkgmxqP5t2JiAN+d0FXB8LaRyZvgs/
 tiwEDenCk1eDWEBcWbLnX7fGGDKDUNXVMAFTrGM1BMNZe6/IL/h/sypLuYSJ/d3Y
 VXDgZZyAWUVqjidDxrwurdjyzvbPd69GDbKjhTuUu4OdqUMucjjQf74w6m857Wn/
 9oLoR0p+8deb1SQ2RuB8sujcJiO9YHczwL8PLDa+bGw3jH6TRiMVVrt1HOw5QmfG
 QpwhKvrF2yPTgv5VZbFvYEvtITnBBfaepQe97pDDEfsHqPeStmI=
 =2eiy
 -----END PGP SIGNATURE-----

Merge tag 'kvm-s390-next-7.0-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

- gmap rewrite: completely new memory management for kvm/s390
- vSIE improvement
- maintainership change for s390 vfio-pci
- small quality of life improvement for protected guests
2026-02-11 18:52:27 +01:00
Linus Torvalds f1c538ca81 Updates for the VDSO subsystem:
- Provide the missing 64-bit variant of clock_getres()
 
     This allows the extension of CONFIG_COMPAT_32BIT_TIME to the vDSO and
     finally the removal of 32-bit time types from the kernel and UAPI.
 
   - Remove the useless and broken getcpu_cache from the VDSO
 
     The intention was to provide a trivial way to retrieve the CPU number from
     the VDSO, but as the VDSO data is per process there is no way to make it
     work.
 
   - Switch get/put_unaligned() from packed struct to memcpy()
 
     The packed struct violates strict aliasing rules which requires to pass
     -fno-strict-aliasing to the compiler. As this are scalar values
     __builtin_memcpy() turns them into simple loads and stores
 
   - Use __typeof_unqual__() for __unqual_scalar_typeof()
 
     The get/put_unaligned() changes triggered a new sparse warning when __beNN
     types are used with get/put_unaligned() as sparse builds add a special
     'bitwise' attribute to them which prevents sparse to evaluate the Generic
     in __unqual_scalar_typeof().
 
     Newer sparse versions support __typeof_unqual__() which avoids the problem,
     but requires a recent sparse install. So this adds a sanity check to sparse
     builds, which validates that sparse is available and capable of handling it.
 
   - Force inline __cvdso_clock_getres_common()
 
     Compilers sometimes un-inline agressively, which results in function call
     overhead and problems with automatic stack variable initialization.
 
     Interestingly enough the force inlining results in smaller code than the
     un-inlined variant produced by GCC when optimizing for size.
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmmJ2eAQHHRnbHhAa2Vy
 bmVsLm9yZwAKCRCmGPVMDXSYoXhQD/4mjneVlRBbQ6Nt9LxxhzPlYXvED6u8b4SX
 R//DQ4qqqagh2fSpE57tr3f56HqhUmXptGJSgEvr6tVKoyugsLqP6sN9J9J3o181
 jnPQR0VBP9dihQZ5X93pKo9NZWxLIn0uLD0RsdCbE9NTx4ciw4VIPFYQqkC4Rw6b
 jiRrDR2l8EhV8cmxB6puW5WaQ932M6Awabw9RumzwH3MzIIlbc5Ero51S9eS64LL
 byU5XeWUe295W1Gxze5RHHJWyNQEyx1eUCFfe3LWvfpz7FMzc2AQsKnIJDzW3GiO
 UGu5MGptbLpG+ccvhVEs6/Ls5pWXcoCw4WuDNAunCCOmqda98oDniKf2LwRRbLT0
 nAfLNatMnhXdTPk2zbS45z9uipUQAGKmVAE3/LVqB+ekcutmIGMyqHgR75QX0b4l
 CQPkC9rBsV6gGsScWTnhRydhqioNO/uhhrQv0vEXnKZa0ysTbgZKt3JDZbgUEL2B
 uDxXKyrqjpnqDZKlMMaoLtwd+l+T80ya4/NhHd4ZNGUpTUrHVw2H47lgE7ahCxEk
 /SvXTZSU4Jp8sVQIQ+J6y5z2AQ/xGy++zvNKiZMyP9fQuPqhiDqYkLpmOp61bARx
 wqyVsfGXZYSB1l16AiSC/CyUDcMqqsFohGXQ/Yf0SOiVtXu2WUyfofY1N0IXIGu4
 WOVV9mH1yg==
 =0ogX
 -----END PGP SIGNATURE-----

Merge tag 'timers-vdso-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull VDSO updates from Thomas Gleixner:

 - Provide the missing 64-bit variant of clock_getres()

   This allows the extension of CONFIG_COMPAT_32BIT_TIME to the vDSO and
   finally the removal of 32-bit time types from the kernel and UAPI.

 - Remove the useless and broken getcpu_cache from the VDSO

   The intention was to provide a trivial way to retrieve the CPU number
   from the VDSO, but as the VDSO data is per process there is no way to
   make it work.

 - Switch get/put_unaligned() from packed struct to memcpy()

   The packed struct violates strict aliasing rules which requires to
   pass -fno-strict-aliasing to the compiler. As this are scalar values
   __builtin_memcpy() turns them into simple loads and stores

 - Use __typeof_unqual__() for __unqual_scalar_typeof()

   The get/put_unaligned() changes triggered a new sparse warning when
   __beNN types are used with get/put_unaligned() as sparse builds add a
   special 'bitwise' attribute to them which prevents sparse to evaluate
   the Generic in __unqual_scalar_typeof().

   Newer sparse versions support __typeof_unqual__() which avoids the
   problem, but requires a recent sparse install. So this adds a sanity
   check to sparse builds, which validates that sparse is available and
   capable of handling it.

 - Force inline __cvdso_clock_getres_common()

   Compilers sometimes un-inline agressively, which results in function
   call overhead and problems with automatic stack variable
   initialization.

   Interestingly enough the force inlining results in smaller code than
   the un-inlined variant produced by GCC when optimizing for size.

* tag 'timers-vdso-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  vdso/gettimeofday: Force inlining of __cvdso_clock_getres_common()
  x86/percpu: Make CONFIG_USE_X86_SEG_SUPPORT work with sparse
  compiler: Use __typeof_unqual__() for __unqual_scalar_typeof()
  powerpc/vdso: Provide clock_getres_time64()
  tools headers: Remove unneeded ignoring of warnings in unaligned.h
  tools headers: Update the linux/unaligned.h copy with the kernel sources
  vdso: Switch get/put_unaligned() from packed struct to memcpy()
  parisc: Inline a type punning version of get_unaligned_le32()
  vdso: Remove struct getcpu_cache
  MIPS: vdso: Provide getres_time64() for 32-bit ABIs
  arm64: vdso32: Provide clock_getres_time64()
  ARM: VDSO: Provide clock_getres_time64()
  ARM: VDSO: Patch out __vdso_clock_getres() if unavailable
  x86/vdso: Provide clock_getres_time64() for x86-32
  selftests: vDSO: vdso_test_abi: Add test for clock_getres_time64()
  selftests: vDSO: vdso_test_abi: Use UAPI system call numbers
  selftests: vDSO: vdso_config: Add configurations for clock_getres_time64()
  vdso: Add prototype for __vdso_clock_getres_time64()
2026-02-10 17:02:23 -08:00
Linus Torvalds 36ae1c45b2 Scheduler changes for v7.0:
Scheduler Kconfig space updates:
 
  - Further consolidate configurable preemption modes: reduce
    the number of architectures that are allowed to offer
    PREEMPT_NONE and PREEMPT_VOLUNTARY, reducing the number
    of preemption models from four to just two: 'full' and 'lazy'
    on up-to-date architectures (arm64, loongarch, powerpc,
    riscv, s390, x86).
 
    None and voluntary are only available as legacy features
    on platforms that don't implement lazy preemption yet,
    or which don't even support preemption.
 
    The goal is to eventually remove cond_resched() and
    voluntary preemption altogether.
 
    (Peter Zijlstra)
 
 RSEQ based 'scheduler time slice extension' support:
 
 This allows a thread to request a time slice extension when it
 enters a critical section to avoid contention on a resource when
 the thread is scheduled out inside of the critical section.
 
  - Add fields and constants for time slice extension
  - Provide static branch for time slice extensions
  - Add statistics for time slice extensions
  - Add prctl() to enable time slice extensions
  - Implement sys_rseq_slice_yield()
  - Implement syscall entry work for time slice extensions
  - Implement time slice extension enforcement timer
  - Reset slice extension when scheduled
  - Implement rseq_grant_slice_extension()
  - entry: Hook up rseq time slice extension
  - selftests: Implement time slice extension test
 
    (Thomas Gleixner)
 
  - Allow registering RSEQ with slice extension
  - Move slice_ext_nsec to debugfs
  - Lower default slice extension
  - selftests/rseq: Add rseq slice histogram script
 
    (Peter Zijlstra)
 
 Scheduler performance/scalability improvements:
 
  - Update rq->avg_idle when a task is moved to an idle CPU,
    which improves the scalability of various workloads.
    (Shubhang Kaushik)
 
  - Reorder fields in 'struct rq' for better caching
    (Blake Jones)
 
  - Fair scheduler SMP NOHZ balancing code speedups:
 
    - Move checking for nohz cpus after time check
    - Change likelyhood of nohz.nr_cpus
    - Remove nohz.nr_cpus and use weight of cpumask instead
 
      (Shrikanth Hegde)
 
  - Avoid false sharing for sched_clock_irqtime (Wangyang Guo)
 
  - Drop useless cpumask_empty() in find_energy_efficient_cpu()
  - Simplify task_numa_find_cpu()
  - Use cpumask_weight_and() in sched_balance_find_dst_group()
 
    (Yury Norov)
 
 DL scheduler updates:
 
  - Add a deadline server for sched_ext tasks (by Andrea Righi and
    Joel Fernandes, with fixes by Peter Zijlstra)
 
 RT scheduler updates:
 
  - Skip currently executing CPU in rto_next_cpu() (Chen Jinghuang)
 
 Entry code updates and performance improvements, which is part of the
 scheduler tree in this cycle due to interdependencies with the RSEQ
 based time slice extension work:
 
   - Remove unused syscall argument from syscall_trace_enter()
   - Rework syscall_exit_to_user_mode_work() for architecture reuse
   - Add arch_ptrace_report_syscall_entry/exit()
   - Inline syscall_exit_work() and syscall_trace_enter()
 
     (Jinjie Ruan)
 
 Scheduler core updates:
 
  - Rework sched_class::wakeup_preempt() and rq_modified_*()
  - Avoid rq->lock bouncing in sched_balance_newidle()
  - Rename rcu_dereference_check_sched_domain() =>
           rcu_dereference_sched_domain()
  - <linux/compiler_types.h>: Add the __signed_scalar_typeof() helper
 
    (Peter Zijlstra)
 
 Fair scheduler updates/refactoring:
 
  - Fold the sched_avg update
  - Change rcu_dereference_check_sched_domain() to rcu-sched
  - Switch to rcu_dereference_all()
  - Remove superfluous rcu_read_lock()
  - Limit hrtick work
 
    (Peter Zijlstra)
 
  - Join two #ifdef CONFIG_FAIR_GROUP_SCHED blocks
  - Clean up comments in 'struct cfs_rq'
  - Separate se->vlag from se->vprot
  - Rename cfs_rq::avg_load to cfs_rq::sum_weight
  - Rename cfs_rq::avg_vruntime to ::sum_w_vruntime & helper functions
  - Introduce and use the vruntime_cmp() and vruntime_op() wrappers
    for wrapped-signed aritmetics
  - Sort out 'blocked_load*' namespace noise
 
    (Ingo Molnar)
 
 Scheduler debugging code updates:
 
  - Export hidden tracepoints to modules (Gabriele Monaco)
 
  - Convert copy_from_user() + kstrtouint() to kstrtouint_from_user()
    (Fushuai Wang)
 
  - Add assertions to QUEUE_CLASS (Peter Zijlstra)
 
  - hrtimer: Fix tracing oddity (Thomas Gleixner)
 
 Misc fixes and cleanups:
 
  - Re-evaluate scheduling when migrating queued tasks out of
    throttled cgroups (Zicheng Qu)
 
  - Remove task_struct->faults_disabled_mapping (Christoph Hellwig)
 
  - Fix math notation errors in avg_vruntime comment (Zhan Xusheng)
 
  - sched/cpufreq: Use %pe format for PTR_ERR() printing (zenghongling)
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmmJj+IRHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1grtQ//WyXYGVE/WicdqslfaCY2Mr0uJnL0tLSM
 CJp+0LROdkmy+ChJmftO8RgjCUSsjhC4/xcBhUQXApf/ffQi3b2jH6nkTp/Z64Ms
 p2IXLkBiZjwdcO6fGbB0JE2G1J4hGRC5BlqfgkZzWidMf3kIbmrHg99mVWGzODLY
 N/cPW4d0WGf9TScl1FgEiOqgF3czMLlqvTDJqaFMpsTzSUcRBnrG4xushb4W/bBx
 573eqxgZJ6urNSGu8niY9PAl9F7gskXW3YxI3k8SH7VmJKSevWlwI9vMEhcRDzud
 E0XxD7J8iPOKtr7ypXm7anMBv4jWVUdAnPbYi4TDsyDDU/HguqMqT1McTGn8wQ+F
 jmdhmMC9/TEIzq93SNLbCYieibqDsmJoNVFFi0FWfPLMtYbcZd5a884SIz532vx4
 DegdlDXdazUwhxzDiQR3sq1CsHXpxNS2YdrpadAtF/r2gU86DQjsEew8yBvXi7bb
 Wrkzpax70sU1AFI23wJQkEb/OnnXyehAHAhhQN6GVvuiGr9P7C02WLEGLlmSmJrx
 zl2F750P76yhTfGcvTfJ/5LTfSB+yRozGvcdXnIkyzWotY6a2D1MKNusAfVax+IR
 kyfAWqVdxBhlKnqYbu92lTogvnPh3Lymd6G4TZZRkSH2jixyGd2oS7nZaDBAeBEM
 NHQtr9R+KyU=
 =Xj2f
 -----END PGP SIGNATURE-----

Merge tag 'sched-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull scheduler updates from Ingo Molnar:
 "Scheduler Kconfig space updates:

   - Further consolidate configurable preemption modes (Peter Zijlstra)

     Reduce the number of architectures that are allowed to offer
     PREEMPT_NONE and PREEMPT_VOLUNTARY, reducing the number of
     preemption models from four to just two: 'full' and 'lazy' on
     up-to-date architectures (arm64, loongarch, powerpc, riscv, s390,
     x86).

     None and voluntary are only available as legacy features on
     platforms that don't implement lazy preemption yet, or which don't
     even support preemption.

     The goal is to eventually remove cond_resched() and voluntary
     preemption altogether.

  RSEQ based 'scheduler time slice extension' support (Thomas Gleixner
  and Peter Zijlstra):

  This allows a thread to request a time slice extension when it enters
  a critical section to avoid contention on a resource when the thread
  is scheduled out inside of the critical section.

   - Add fields and constants for time slice extension
   - Provide static branch for time slice extensions
   - Add statistics for time slice extensions
   - Add prctl() to enable time slice extensions
   - Implement sys_rseq_slice_yield()
   - Implement syscall entry work for time slice extensions
   - Implement time slice extension enforcement timer
   - Reset slice extension when scheduled
   - Implement rseq_grant_slice_extension()
   - entry: Hook up rseq time slice extension
   - selftests: Implement time slice extension test
   - Allow registering RSEQ with slice extension
   - Move slice_ext_nsec to debugfs
   - Lower default slice extension
   - selftests/rseq: Add rseq slice histogram script

  Scheduler performance/scalability improvements:

   - Update rq->avg_idle when a task is moved to an idle CPU, which
     improves the scalability of various workloads (Shubhang Kaushik)

   - Reorder fields in 'struct rq' for better caching (Blake Jones)

   - Fair scheduler SMP NOHZ balancing code speedups (Shrikanth Hegde):
      - Move checking for nohz cpus after time check
      - Change likelyhood of nohz.nr_cpus
      - Remove nohz.nr_cpus and use weight of cpumask instead

   - Avoid false sharing for sched_clock_irqtime (Wangyang Guo)

   - Cleanups (Yury Norov):
      - Drop useless cpumask_empty() in find_energy_efficient_cpu()
      - Simplify task_numa_find_cpu()
      - Use cpumask_weight_and() in sched_balance_find_dst_group()

  DL scheduler updates:

   - Add a deadline server for sched_ext tasks (by Andrea Righi and Joel
     Fernandes, with fixes by Peter Zijlstra)

  RT scheduler updates:

   - Skip currently executing CPU in rto_next_cpu() (Chen Jinghuang)

  Entry code updates and performance improvements (Jinjie Ruan)

  This is part of the scheduler tree in this cycle due to inter-
  dependencies with the RSEQ based time slice extension work:

    - Remove unused syscall argument from syscall_trace_enter()
    - Rework syscall_exit_to_user_mode_work() for architecture reuse
    - Add arch_ptrace_report_syscall_entry/exit()
    - Inline syscall_exit_work() and syscall_trace_enter()

  Scheduler core updates (Peter Zijlstra):

   - Rework sched_class::wakeup_preempt() and rq_modified_*()
   - Avoid rq->lock bouncing in sched_balance_newidle()
   - Rename rcu_dereference_check_sched_domain() =>
            rcu_dereference_sched_domain()
   - <linux/compiler_types.h>: Add the __signed_scalar_typeof() helper

  Fair scheduler updates/refactoring (Peter Zijlstra and Ingo Molnar):

   - Fold the sched_avg update
   - Change rcu_dereference_check_sched_domain() to rcu-sched
   - Switch to rcu_dereference_all()
   - Remove superfluous rcu_read_lock()
   - Limit hrtick work
   - Join two #ifdef CONFIG_FAIR_GROUP_SCHED blocks
   - Clean up comments in 'struct cfs_rq'
   - Separate se->vlag from se->vprot
   - Rename cfs_rq::avg_load to cfs_rq::sum_weight
   - Rename cfs_rq::avg_vruntime to ::sum_w_vruntime & helper functions
   - Introduce and use the vruntime_cmp() and vruntime_op() wrappers for
     wrapped-signed aritmetics
   - Sort out 'blocked_load*' namespace noise

  Scheduler debugging code updates:

   - Export hidden tracepoints to modules (Gabriele Monaco)

   - Convert copy_from_user() + kstrtouint() to kstrtouint_from_user()
     (Fushuai Wang)

   - Add assertions to QUEUE_CLASS (Peter Zijlstra)

   - hrtimer: Fix tracing oddity (Thomas Gleixner)

  Misc fixes and cleanups:

   - Re-evaluate scheduling when migrating queued tasks out of throttled
     cgroups (Zicheng Qu)

   - Remove task_struct->faults_disabled_mapping (Christoph Hellwig)

   - Fix math notation errors in avg_vruntime comment (Zhan Xusheng)

   - sched/cpufreq: Use %pe format for PTR_ERR() printing
     (zenghongling)"

* tag 'sched-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
  sched: Re-evaluate scheduling when migrating queued tasks out of throttled cgroups
  sched/cpufreq: Use %pe format for PTR_ERR() printing
  sched/rt: Skip currently executing CPU in rto_next_cpu()
  sched/clock: Avoid false sharing for sched_clock_irqtime
  selftests/sched_ext: Add test for DL server total_bw consistency
  selftests/sched_ext: Add test for sched_ext dl_server
  sched/debug: Fix dl_server (re)start conditions
  sched/debug: Add support to change sched_ext server params
  sched_ext: Add a DL server for sched_ext tasks
  sched/debug: Stop and start server based on if it was active
  sched/debug: Fix updating of ppos on server write ops
  sched/deadline: Clear the defer params
  entry: Inline syscall_exit_work() and syscall_trace_enter()
  entry: Add arch_ptrace_report_syscall_entry/exit()
  entry: Rework syscall_exit_to_user_mode_work() for architecture reuse
  entry: Remove unused syscall argument from syscall_trace_enter()
  sched: remove task_struct->faults_disabled_mapping
  sched: Update rq->avg_idle when a task is moved to an idle CPU
  selftests/rseq: Add rseq slice histogram script
  hrtimer: Fix trace oddity
  ...
2026-02-10 12:50:10 -08:00
Linus Torvalds c48953d819 s390 updates for 7.0 merge window
- Drop support for outdated 3590/3592 and 3480 tape devices, and limit
   support to virtualized 3490E types devices
 
 - Implement exception based WARN() and WARN_ONCE() similar to x86
 
 - Slightly optimize preempt primitives like __preempt_count_add() and
   __preempt_count_dec_and_test()
 
 - A couple of small fixes and improvements
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEECMNfWEw3SLnmiLkZIg7DeRspbsIFAmmHePIACgkQIg7DeRsp
 bsIQeA//ZBOWwSlIkGhdH/qn7F2RMxq/FkvYN28YvCo1VFdAiqRXjDBH8yXE9Px4
 MghsDY1GzmW3M56Qq/rYZ2UhK0dIgpu9l8SJa5uxRaIzhIUxjmNJa+f3LhtCTZZH
 9timoL5zL+n8QwwLPo9DgKy+m/BOodKBeI9cHFYoia64eJqo1xDVg8tYzW+vlVZT
 LZt0kT6Nz/Hrkg/uOhsz40IGzR/fcsNeDGTF+JIjqcfpdMSAeDMeleWVRacw/0BZ
 q1gifRXxe04N8bjS7c98RiKX7CD3xQzzibH2ert2Mupu+yir6pvAlgYHOif3Z8gi
 6trcSWaxZCCslS2U7O1g/hyz1WXEFC+iDwajGiqT0XRSjuQ2FeVmfqcmaE0CekyY
 5mpdtwfLrNSZJL422a3lckqz73gkge5hC46wgvhpvx7lb4IF6paYsk6FPDZlxw+/
 THxbrYufs71VACvcfRs5MXSS94qkzkdgo5jhnS/m5zhblIrdkBUz29c5g24qUWo1
 ihyzkqtwMFHpKXE9rHK/Z80uZXr4/cLPpMq8XYXRQHZ6vFyZFfu4QpLHWTQ0VMyp
 ZBijhRqzlN/nAItAfBsgJ5QipHk2WL7V8zoi5xu7QeH+lrZ+7+koSVxGJAZbG4OO
 3fv6Nucjr/zCbyRKrjEaWaXzdMCVSdfrtfTQgftgFHTO8IxVLjc=
 =xeBU
 -----END PGP SIGNATURE-----

Merge tag 's390-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Heiko Carstens:

 - Drop support for outdated 3590/3592 and 3480 tape devices, and limit
   support to virtualized 3490E types devices

 - Implement exception based WARN() and WARN_ONCE() similar to x86

 - Slightly optimize preempt primitives like __preempt_count_add() and
   __preempt_count_dec_and_test()

 - A couple of small fixes and improvements

* tag 's390-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (35 commits)
  s390/tape: Consolidate tape config options and modules
  s390/cio: Fix device lifecycle handling in css_alloc_subchannel()
  s390/tape: Rename tape_34xx.c to tape_3490.c
  s390/tape: Cleanup sense data analysis and error handling
  s390/tape: Remove 3480 tape device type
  s390/tape: Remove unused command definitions
  s390/tape: Remove special block id handling
  s390/tape: Remove tape load display support
  s390/tape: Remove support for 3590/3592 models
  s390/kexec: Emit an error message when cmdline is too long
  s390/configs: Enable BLK_DEV_NULL_BLK as module
  s390: Document s390 stackprotector support
  s390/perf: Disable register readout on sampling events
  s390/Kconfig: Define non-zero ILLEGAL_POINTER_VALUE
  s390/bug: Prevent tail-call optimization
  s390/bug: Skip __WARN_trap() in call traces
  s390/bug: Implement WARN_ONCE()
  s390/bug: Implement __WARN_printf()
  s390/traps: Copy monitor code to pt_regs
  s390/bug: Introduce and use monitor code macro
  ...
2026-02-09 20:17:03 -08:00
Claudio Imbrenda e38c884df9 KVM: s390: Switch to new gmap
Switch KVM/s390 to use the new gmap code.

Remove includes to <gmap.h> and include "gmap.h" instead; fix all the
existing users of the old gmap functions to use the new ones instead.

Fix guest storage key access functions to work with the new gmap.

Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
2026-02-04 17:00:10 +01:00
Claudio Imbrenda 3ddee7e651 KVM: s390: Export two functions
Export __make_folio_secure() and s390_wiggle_split_folio(), as they will
be needed to be used by KVM.

Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
2026-02-04 17:00:08 +01:00
Claudio Imbrenda 21401ce497 s390: Make UV folio operations work on whole folio
uv_destroy_folio() and uv_convert_from_secure_folio() should work on
all pages in the folio, not just the first one.

This was fine until now, but it will become a problem with upcoming
patches.

Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
2026-02-04 17:00:08 +01:00
Vasily Gorbik f8a9c11000 s390/kexec: Emit an error message when cmdline is too long
Currently, if the command line passed to kexec_file_load() exceeds
the supported limit of the kernel being kexec'd, -EINVAL is returned
to userspace, which is consistent across architectures. Since
-EINVAL is not specific to this case, the kexec tool cannot provide
a specific reason for the failure. Many architectures emit an error
message in this case. Add a similar error message, including the
effective limit, since the command line length is configurable.

Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2026-02-03 12:48:28 +01:00
Peter Zijlstra 3e4067169c Linux 6.19-rc8
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAml/zSkeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG+bwIAJ0jbbeKDyeJJxPo
 8PgScnPJx9vBL3hGpphZrhbV3GOe9bDhKM/0Xk9qMDbpAm9C6qiBMTiDWyvWv5Qi
 qzDlZfoymMaDLPMxw9WHjJ++i1Z2StNdrz57Vze98C3/iG6gBcKnUEUzvF9nigri
 HIoxoOKlbSXLPUIzt49xE7YX+CRJhLF/kXmfoauZn5ghpv+uqSpWvRbUQJa3dmc0
 S4Ie/nbPtdVHmy1Fz9LJFDOzsdhGyjzHF4kc4shDkjAs8RAr8fJh74mQHO5a3MWA
 3WZ7GAAAc4XXNqj76X2dnVlMWpQNJ4p2e+OalsuXGA6VQ7OgbrJGMX8P6dMFn5AF
 8hFsXn4=
 =IdZ1
 -----END PGP SIGNATURE-----

Merge branch 'v6.19-rc8'

Update to avoid conflicts with /urgent patches.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
2026-02-03 12:04:13 +01:00
Thomas Richter b2c04fc123 s390/perf: Disable register readout on sampling events
Running commands
 # ./perf record  -IR0,R1 -a sleep 1
extracts and displays register value of general purpose register r1 and r0.
However the value displayed of any register is random and does not
reflect the register value recorded at the time of the sample interrupt.

The sampling device driver on s390 creates a very large buffer
for the hardware to store the samples. Only when that large buffer
gets full an interrupt is generated and many hundreds of sample
entries are processed and copied to the kernel ring buffer and
eventually get copied to the perf tool. It is during the copy
to the kernel ring buffer that each sample is processed (on s390)
and at that time the register values are extracted.
This is not the original goal, the register values should be read
when the samples are created not when the samples are copied to the
kernel ring buffer.

Prevent this event from being installed in the first place and
return -EOPNOTSUPP. This is already the case for PERF_SAMPLE_REGS_USER.

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2026-01-27 12:21:20 +01:00
Heiko Carstens 79996065cf s390/bug: Skip __WARN_trap() in call traces
In order to avoid rather pointless warning disassemblies of __WARN_trap()
set the PSW address to the return address of the function which called
__WARN_trap(). This is the address to which __WARN_trap() would return
in any case.

The result is a disassembly of the function which called __WARN_trap(),
which is much more helpful.

Before:

WARNING: arch/s390/kernel/setup.c:1017 at foobar+0x2c/0x20, CPU#0: swapper/0/0
...
Krnl PSW : 0704c00180000000 000003ffe0f675f4 (__WARN_trap+0x4/0x10)
...
Krnl Code: 000003ffe0f675ec: 0707                bcr     0,%r7
           000003ffe0f675ee: 0707                bcr     0,%r7
          *000003ffe0f675f0: af000001            mc      1,0
          >000003ffe0f675f4: 07fe                bcr     15,%r14
           000003ffe0f675f6: 47000700            bc      0,1792
           000003ffe0f675fa: 0707                bcr     0,%r7
           000003ffe0f675fc: 0707                bcr     0,%r7
           000003ffe0f675fe: 0707                bcr     0,%r7
Call Trace:
 [<000003ffe0f675f4>] __WARN_trap+0x4/0x10
 [<000003ffe185bc2e>] arch_cpu_finalize_init+0x26/0x60
 [<000003ffe185654c>] start_kernel+0x53c/0x5d8
 [<000003ffe010002e>] startup_continue+0x2e/0x40

Afterwards:

WARNING: arch/s390/kernel/setup.c:1017 at foobar+0x12/0x30, CPU#0: swapper/0/0
...
Krnl PSW : 0704c00180000000 000003ffe185bc2e (arch_cpu_finalize_init+0x26/0x60)
...
Krnl Code: 000003ffe185bc1c: e3f0ff98ff71        lay     %r15,-104(%r15)
           000003ffe185bc22: e3e0f0980024        stg     %r14,152(%r15)
          *000003ffe185bc28: c0e5ff45ed94        brasl   %r14,000003ffe0119750
          >000003ffe185bc2e: c0e5ffa052b9        brasl   %r14,000003ffe0c661a0
           000003ffe185bc34: c020fffe86d6        larl    %r2,000003ffe182c9e0
           000003ffe185bc3a: e548f0a80006        mvghi   168(%r15),6
           000003ffe185bc40: e548f0a00005        mvghi   160(%r15),5
           000003ffe185bc46: a7690004            lghi    %r6,4
Call Trace:
 [<000003ffe185bc2e>] arch_cpu_finalize_init+0x26/0x60
 [<000003ffe185654c>] start_kernel+0x53c/0x5d8
 [<000003ffe010002e>] startup_continue+0x2e/0x40

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2026-01-27 12:16:16 +01:00
Heiko Carstens 04dabb4261 s390/bug: Implement __WARN_printf()
This is the s390 variant of commit 5b472b6e5b ("x86_64/bug: Implement
__WARN_printf()"). See the x86 commit for the general idea; there are only
implementation details which are different.

With the new exception based __WARN_printf() implementation the generated
code for a simple WARN() is simplified.

For example:

void foo(int a) { WARN(a, "bar"); }

Before this change the generated code looks like this:

0000000000000210 <foo>:
 210:   c0 04 00 00 00 00       jgnop   210 <foo>
 216:   ec 26 00 06 00 7c       cgijne  %r2,0,222 <foo+0x12>
 21c:   c0 f4 00 00 00 00       jg      21c <foo+0xc>
                        21e: R_390_PC32DBL      __s390_indirect_jump_r14+0x2
 222:   eb ef f0 88 00 24       stmg    %r14,%r15,136(%r15)
 228:   b9 04 00 ef             lgr     %r14,%r15
 22c:   e3 f0 ff e8 ff 71       lay     %r15,-24(%r15)
 232:   e3 e0 f0 98 00 24       stg     %r14,152(%r15)
 238:   c0 20 00 00 00 00       larl    %r2,238 <foo+0x28>
                        23a: R_390_PC32DBL      .LC48+0x2
 23e:   c0 e5 00 00 00 00       brasl   %r14,23e <foo+0x2e>
                        240: R_390_PLT32DBL     __warn_printk+0x2
 244:   af 00 00 00             mc      0,0
 248:   eb ef f0 a0 00 04       lmg     %r14,%r15,160(%r15)
 24e:   c0 f4 00 00 00 00       jg      24e <foo+0x3e>
                        250: R_390_PC32DBL      __s390_indirect_jump_r14+0x2

With this change the generated code looks like this:

0000000000000210 <foo>:
 210:   c0 04 00 00 00 00       jgnop   210 <foo>
 216:   ec 26 00 06 00 7c       cgijne  %r2,0,222 <foo+0x12>
 21c:   c0 f4 00 00 00 00       jg      21c <foo+0xc>
                        21e: R_390_PC32DBL      __s390_indirect_jump_r14+0x2
 222:   c0 20 00 00 00 00       larl    %r2,222 <foobar+0x12>
                        224: R_390_PC32DBL      __bug_table+0x2
 228:   c0 f4 00 00 00 00       jg      228 <foobar+0x18>
                        22a: R_390_PLT32DBL     __WARN_trap+0x2

Downside is that the call trace now starts at __WARN_trap():

------------[ cut here ]------------
bar
WARNING: arch/s390/kernel/setup.c:1017 at 0x0, CPU#0: swapper/0/0
...
Krnl PSW : 0704c00180000000 000003ffe0f6a3b4 (__WARN_trap+0x4/0x10)
...
Krnl Code: 000003ffe0f6a3ac: 0707                bcr     0,%r7
           000003ffe0f6a3ae: 0707                bcr     0,%r7
          *000003ffe0f6a3b0: af000001            mc      1,0
          >000003ffe0f6a3b4: 07fe                bcr     15,%r14
           000003ffe0f6a3b6: 47000700            bc      0,1792
           000003ffe0f6a3ba: 0707                bcr     0,%r7
           000003ffe0f6a3bc: 0707                bcr     0,%r7
           000003ffe0f6a3be: 0707                bcr     0,%r7
Call Trace:
 [<000003ffe0f6a3b4>] __WARN_trap+0x4/0x10
([<000003ffe185a54c>] start_kernel+0x53c/0x5d8)
 [<000003ffe010002e>] startup_continue+0x2e/0x40

Which isn't too helpful. This can be addressed by just skipping __WARN_trap(),
which will be addressed in a later patch.

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2026-01-27 12:16:16 +01:00
Heiko Carstens ee44f4e7eb s390/traps: Copy monitor code to pt_regs
In case of a monitor call program check the CPU stores the monitor code to
lowcore. Let the program check handler copy it to the pt_regs structure so
it can be used by the monitor call exception handler.

Instead of increasing the pt_regs size add a union which contains both
orig_gpr2 and monitor_code, since orig_gpr2 is not used in case of a
program check.

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2026-01-27 12:16:16 +01:00
Heiko Carstens 8cbfd13601 s390/bug: Introduce and use monitor code macro
The first operand address of the monitor call (mc) instruction is the
monitor code. Currently the monitor code is ignored, but this will
change. Therefore add and use MONCODE_BUG instead of a hardcoded zero.

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2026-01-27 12:16:16 +01:00
Mike Rapoport (Microsoft) 9fac145b6d mm, arch: consolidate hugetlb CMA reservation
Every architecture that supports hugetlb_cma command line parameter
reserves CMA areas for hugetlb during setup_arch().

This obfuscates the ordering of hugetlb CMA initialization with respect to
the rest initialization of the core MM.

Introduce arch_hugetlb_cma_order() callback to allow architectures report
the desired order-per-bit of CMA areas and provide a week implementation
of arch_hugetlb_cma_order() for architectures that don't support hugetlb
with CMA.

Use this callback in hugetlb_cma_reserve() instead if passing the order as
parameter and call hugetlb_cma_reserve() from mm_core_init_early() rather
than have it spread over architecture specific code.

Link: https://lkml.kernel.org/r/20260111082105.290734-28-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Magnus Lindholm <linmag7@gmail.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Pratyush Yadav <pratyush@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2026-01-26 20:02:19 -08:00
Thomas Gleixner 99d2592023 rseq: Implement sys_rseq_slice_yield()
Provide a new syscall which has the only purpose to yield the CPU after the
kernel granted a time slice extension.

sched_yield() is not suitable for that because it unconditionally
schedules, but the end of the time slice extension is not required to
schedule when the task was already preempted. This also allows to have a
strict check for termination to catch user space invoking random syscalls
including sched_yield() from a time slice extension region.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251215155708.929634896@linutronix.de
2026-01-22 11:11:17 +01:00
Randy Dunlap 24c776355f kernel.h: drop hex.h and update all hex.h users
Remove <linux/hex.h> from <linux/kernel.h> and update all users/callers of
hex.h interfaces to directly #include <linux/hex.h> as part of the process
of putting kernel.h on a diet.

Removing hex.h from kernel.h means that 36K C source files don't have to
pay the price of parsing hex.h for the roughly 120 C source files that
need it.

This change has been build-tested with allmodconfig on most ARCHes.  Also,
all users/callers of <linux/hex.h> in the entire source tree have been
updated if needed (if not already #included).

Link: https://lkml.kernel.org/r/20251215005206.2362276-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2026-01-20 19:44:19 -08:00
Heiko Carstens 576b1b7b11 s390/vdso: Disable kstack erase
For some reason gcc 8, 9, 10, and 11 generate a dynamic relocation in
vdso.so.dbg if CONFIG_KSTACK_ERASE is enabled:

>> arch/s390/kernel/vdso/vdso.so.dbg: dynamic relocations are not supported
   make[3]: *** [arch/s390/kernel/vdso/Makefile:54: arch/s390/kernel/vdso/vdso.so.dbg] Error 1

$ readelf -rW arch/s390/kernel/vdso/vdso.so.dbg

Relocation section '.rela.dyn' at offset 0x15c0 contains 1 entry:
    Offset             Info             Type               Symbol's Value  Symbol's Name + Addend
00000000000015f0  000000010000000b R_390_JMP_SLOT         0000000000000000 __sanitizer_cov_stack_depth + 0

Add $(DISABLE_KSTACK_ERASE) to vdso compile flags to fix this.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202601070505.xQcLr5KV-lkp@intel.com/
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2026-01-17 15:51:28 +01:00
Thomas Weißschuh 7158fc54b2 vdso: Remove struct getcpu_cache
The cache parameter of getcpu() is useless nowadays for various reasons.

  * It is never passed by userspace for either the vDSO or syscalls.
  * It is never used by the kernel.
  * It could not be made to work on the current vDSO architecture.
  * The structure definition is not part of the UAPI headers.
  * vdso_getcpu() is superseded by restartable sequences in any case.

Remove the struct and its header.

As a side-effect this gets rid of an unwanted inclusion of the linux/
header namespace from vDSO code.

[ tglx: Adapt to s390 upstream changes */

Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Link: https://patch.msgid.link/20251230-getcpu_cache-v3-1-fb9c5f880ebe@linutronix.de
2026-01-14 08:56:40 +01:00
Jens Remus 489e96651d s390/stacktrace: Do not fallback to RA register
The logic to fallback to the return address (RA) register value in
the topmost frame when stack tracing using back chain is broken in
multiple ways:

When assuming the RA register 14 has not been saved yet one must assume
that a new user stack frame has not been allocated either.  Therefore
the back chain would not contain the stack pointer (SP) at entry, but
the caller's SP at its entry instead.

Therefore when falling back to the RA register 14 value it would also be
necessary to fallback to the SP register 15 value.  Otherwise an invalid
combination of RA register 14 and caller's SP at its entry (from the
back chain) is used.

In the topmost frame the back chain contains either the caller's SP at
its entry (before having allocated a new stack frame in the prologue),
the SP at entry (after having allocated a new stack frame), or an
uninitialized value (during static/dynamic stack allocation).  In both
cases where the back chain is valid either the caller or prologue must
have saved its respective RA to the respective frame.  Therefore, if the
RA obtained from the frame pointed to by the back chain is invalid, this
does not indicate that the IP in the topmost frame is still early in the
prologue and the RA has not been saved.

Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2025-12-14 11:03:58 +01:00
Sven Schnelle b1aa01d312 s390/ipl: Clear SBP flag when bootprog is set
With z16 a new flag 'search boot program' was introduced for
list-directed IPL (SCSI, NVMe, ECKD DASD). If this flag is set,
e.g. via selecting the "Automatic" value for the "Boot program
selector" control on an HMC load panel, it is copied to the reipl
structure from the initial ipl structure. When a user now sets a
boot prog via sysfs, the flag is not cleared and the bootloader
will again automatically select the boot program, ignoring user
configuration.

To avoid that, clear the SBP flag when a bootprog sysfs file is
written.

Cc: stable@vger.kernel.org
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2025-12-14 11:03:57 +01:00
Linus Torvalds 51d90a15fe ARM:
- Support for userspace handling of synchronous external aborts (SEAs),
   allowing the VMM to potentially handle the abort in a non-fatal
   manner.
 
 - Large rework of the VGIC's list register handling with the goal of
   supporting more active/pending IRQs than available list registers in
   hardware. In addition, the VGIC now supports EOImode==1 style
   deactivations for IRQs which may occur on a separate vCPU than the
   one that acked the IRQ.
 
 - Support for FEAT_XNX (user / privileged execute permissions) and
   FEAT_HAF (hardware update to the Access Flag) in the software page
   table walkers and shadow MMU.
 
 - Allow page table destruction to reschedule, fixing long need_resched
   latencies observed when destroying a large VM.
 
 - Minor fixes to KVM and selftests
 
 Loongarch:
 
 - Get VM PMU capability from HW GCFG register.
 
 - Add AVEC basic support.
 
 - Use 64-bit register definition for EIOINTC.
 
 - Add KVM timer test cases for tools/selftests.
 
 RISC/V:
 
 - SBI message passing (MPXY) support for KVM guest
 
 - Give a new, more specific error subcode for the case when in-kernel
   AIA virtualization fails to allocate IMSIC VS-file
 
 - Support KVM_DIRTY_LOG_INITIALLY_SET, enabling dirty log gradually
   in small chunks
 
 - Fix guest page fault within HLV* instructions
 
 - Flush VS-stage TLB after VCPU migration for Andes cores
 
 s390:
 
 - Always allocate ESCA (Extended System Control Area), instead of
   starting with the basic SCA and converting to ESCA with the
   addition of the 65th vCPU.  The price is increased number of
   exits (and worse performance) on z10 and earlier processor;
   ESCA was introduced by z114/z196 in 2010.
 
 - VIRT_XFER_TO_GUEST_WORK support
 
 - Operation exception forwarding support
 
 - Cleanups
 
 x86:
 
 - Skip the costly "zap all SPTEs" on an MMIO generation wrap if MMIO SPTE
   caching is disabled, as there can't be any relevant SPTEs to zap.
 
 - Relocate a misplaced export.
 
 - Fix an async #PF bug where KVM would clear the completion queue when the
   guest transitioned in and out of paging mode, e.g. when handling an SMI and
   then returning to paged mode via RSM.
 
 - Leave KVM's user-return notifier registered even when disabling
   virtualization, as long as kvm.ko is loaded.  On reboot/shutdown, keeping
   the notifier registered is ok; the kernel does not use the MSRs and the
   callback will run cleanly and restore host MSRs if the CPU manages to
   return to userspace before the system goes down.
 
 - Use the checked version of {get,put}_user().
 
 - Fix a long-lurking bug where KVM's lack of catch-up logic for periodic APIC
   timers can result in a hard lockup in the host.
 
 - Revert the periodic kvmclock sync logic now that KVM doesn't use a
   clocksource that's subject to NTP corrections.
 
 - Clean up KVM's handling of MMIO Stale Data and L1TF, and bury the latter
   behind CONFIG_CPU_MITIGATIONS.
 
 - Context switch XCR0, XSS, and PKRU outside of the entry/exit fast path;
   the only reason they were handled in the fast path was to paper of a bug
   in the core #MC code, and that has long since been fixed.
 
 - Add emulator support for AVX MOV instructions, to play nice with emulated
   devices whose guest drivers like to access PCI BARs with large multi-byte
   instructions.
 
 x86 (AMD):
 
 - Fix a few missing "VMCB dirty" bugs.
 
 - Fix the worst of KVM's lack of EFER.LMSLE emulation.
 
 - Add AVIC support for addressing 4k vCPUs in x2AVIC mode.
 
 - Fix incorrect handling of selective CR0 writes when checking intercepts
   during emulation of L2 instructions.
 
 - Fix a currently-benign bug where KVM would clobber SPEC_CTRL[63:32] on
   VMRUN and #VMEXIT.
 
 - Fix a bug where KVM corrupt the guest code stream when re-injecting a soft
   interrupt if the guest patched the underlying code after the VM-Exit, e.g.
   when Linux patches code with a temporary INT3.
 
 - Add KVM_X86_SNP_POLICY_BITS to advertise supported SNP policy bits to
   userspace, and extend KVM "support" to all policy bits that don't require
   any actual support from KVM.
 
 x86 (Intel):
 
 - Use the root role from kvm_mmu_page to construct EPTPs instead of the
   current vCPU state, partly as worthwhile cleanup, but mostly to pave the
   way for tracking per-root TLB flushes, and elide EPT flushes on pCPU
   migration if the root is clean from a previous flush.
 
 - Add a few missing nested consistency checks.
 
 - Rip out support for doing "early" consistency checks via hardware as the
   functionality hasn't been used in years and is no longer useful in general;
   replace it with an off-by-default module param to WARN if hardware fails
   a check that KVM does not perform.
 
 - Fix a currently-benign bug where KVM would drop the guest's SPEC_CTRL[63:32]
   on VM-Enter.
 
 - Misc cleanups.
 
 - Overhaul the TDX code to address systemic races where KVM (acting on behalf
   of userspace) could inadvertantly trigger lock contention in the TDX-Module;
   KVM was either working around these in weird, ugly ways, or was simply
   oblivious to them (though even Yan's devilish selftests could only break
   individual VMs, not the host kernel)
 
 - Fix a bug where KVM could corrupt a vCPU's cpu_list when freeing a TDX vCPU,
   if creating said vCPU failed partway through.
 
 - Fix a few sparse warnings (bad annotation, 0 != NULL).
 
 - Use struct_size() to simplify copying TDX capabilities to userspace.
 
 - Fix a bug where TDX would effectively corrupt user-return MSR values if the
   TDX Module rejects VP.ENTER and thus doesn't clobber host MSRs as expected.
 
 Selftests:
 
 - Fix a math goof in mmu_stress_test when running on a single-CPU system/VM.
 
 - Forcefully override ARCH from x86_64 to x86 to play nice with specifying
   ARCH=x86_64 on the command line.
 
 - Extend a bunch of nested VMX to validate nested SVM as well.
 
 - Add support for LA57 in the core VM_MODE_xxx macro, and add a test to
   verify KVM can save/restore nested VMX state when L1 is using 5-level
   paging, but L2 is not.
 
 - Clean up the guest paging code in anticipation of sharing the core logic for
   nested EPT and nested NPT.
 
 guest_memfd:
 
 - Add NUMA mempolicy support for guest_memfd, and clean up a variety of
   rough edges in guest_memfd along the way.
 
 - Define a CLASS to automatically handle get+put when grabbing a guest_memfd
   from a memslot to make it harder to leak references.
 
 - Enhance KVM selftests to make it easer to develop and debug selftests like
   those added for guest_memfd NUMA support, e.g. where test and/or KVM bugs
   often result in hard-to-debug SIGBUS errors.
 
 - Misc cleanups.
 
 Generic:
 
 - Use the recently-added WQ_PERCPU when creating the per-CPU workqueue for
   irqfd cleanup.
 
 - Fix a goof in the dirty ring documentation.
 
 - Fix choice of target for directed yield across different calls to
   kvm_vcpu_on_spin(); the function was always starting from the first
   vCPU instead of continuing the round-robin search.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmkvMa8UHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroMlFwf+Ow7zOYUuELSQ+Jn+hOYXiCNrdBDx
 ZamvMU8kLPr7XX0Zog6HgcMm//qyA6k5nSfqCjfsQZrIhRA/gWJ61jz1OX/Jxq18
 pJ9Vz6epnEPYiOtBwz+v8OS8MqDqVNzj2i6W1/cLPQE50c1Hhw64HWS5CSxDQiHW
 A7PVfl5YU12lW1vG3uE0sNESDt4Eh/spNM17iddXdF4ZUOGublserjDGjbc17E7H
 8BX3DkC2plqkJKwtjg0ae62hREkITZZc7RqsnftUkEhn0N0H9+rb6NKUyzIVh9NZ
 bCtCjtrKN9zfZ0Mujnms3ugBOVqNIputu/DtPnnFKXtXWSrHrgGSNv5ewA==
 =PEcw
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
 "ARM:

   - Support for userspace handling of synchronous external aborts
     (SEAs), allowing the VMM to potentially handle the abort in a
     non-fatal manner

   - Large rework of the VGIC's list register handling with the goal of
     supporting more active/pending IRQs than available list registers
     in hardware. In addition, the VGIC now supports EOImode==1 style
     deactivations for IRQs which may occur on a separate vCPU than the
     one that acked the IRQ

   - Support for FEAT_XNX (user / privileged execute permissions) and
     FEAT_HAF (hardware update to the Access Flag) in the software page
     table walkers and shadow MMU

   - Allow page table destruction to reschedule, fixing long
     need_resched latencies observed when destroying a large VM

   - Minor fixes to KVM and selftests

  Loongarch:

   - Get VM PMU capability from HW GCFG register

   - Add AVEC basic support

   - Use 64-bit register definition for EIOINTC

   - Add KVM timer test cases for tools/selftests

  RISC/V:

   - SBI message passing (MPXY) support for KVM guest

   - Give a new, more specific error subcode for the case when in-kernel
     AIA virtualization fails to allocate IMSIC VS-file

   - Support KVM_DIRTY_LOG_INITIALLY_SET, enabling dirty log gradually
     in small chunks

   - Fix guest page fault within HLV* instructions

   - Flush VS-stage TLB after VCPU migration for Andes cores

  s390:

   - Always allocate ESCA (Extended System Control Area), instead of
     starting with the basic SCA and converting to ESCA with the
     addition of the 65th vCPU. The price is increased number of exits
     (and worse performance) on z10 and earlier processor; ESCA was
     introduced by z114/z196 in 2010

   - VIRT_XFER_TO_GUEST_WORK support

   - Operation exception forwarding support

   - Cleanups

  x86:

   - Skip the costly "zap all SPTEs" on an MMIO generation wrap if MMIO
     SPTE caching is disabled, as there can't be any relevant SPTEs to
     zap

   - Relocate a misplaced export

   - Fix an async #PF bug where KVM would clear the completion queue
     when the guest transitioned in and out of paging mode, e.g. when
     handling an SMI and then returning to paged mode via RSM

   - Leave KVM's user-return notifier registered even when disabling
     virtualization, as long as kvm.ko is loaded. On reboot/shutdown,
     keeping the notifier registered is ok; the kernel does not use the
     MSRs and the callback will run cleanly and restore host MSRs if the
     CPU manages to return to userspace before the system goes down

   - Use the checked version of {get,put}_user()

   - Fix a long-lurking bug where KVM's lack of catch-up logic for
     periodic APIC timers can result in a hard lockup in the host

   - Revert the periodic kvmclock sync logic now that KVM doesn't use a
     clocksource that's subject to NTP corrections

   - Clean up KVM's handling of MMIO Stale Data and L1TF, and bury the
     latter behind CONFIG_CPU_MITIGATIONS

   - Context switch XCR0, XSS, and PKRU outside of the entry/exit fast
     path; the only reason they were handled in the fast path was to
     paper of a bug in the core #MC code, and that has long since been
     fixed

   - Add emulator support for AVX MOV instructions, to play nice with
     emulated devices whose guest drivers like to access PCI BARs with
     large multi-byte instructions

  x86 (AMD):

   - Fix a few missing "VMCB dirty" bugs

   - Fix the worst of KVM's lack of EFER.LMSLE emulation

   - Add AVIC support for addressing 4k vCPUs in x2AVIC mode

   - Fix incorrect handling of selective CR0 writes when checking
     intercepts during emulation of L2 instructions

   - Fix a currently-benign bug where KVM would clobber SPEC_CTRL[63:32]
     on VMRUN and #VMEXIT

   - Fix a bug where KVM corrupt the guest code stream when re-injecting
     a soft interrupt if the guest patched the underlying code after the
     VM-Exit, e.g. when Linux patches code with a temporary INT3

   - Add KVM_X86_SNP_POLICY_BITS to advertise supported SNP policy bits
     to userspace, and extend KVM "support" to all policy bits that
     don't require any actual support from KVM

  x86 (Intel):

   - Use the root role from kvm_mmu_page to construct EPTPs instead of
     the current vCPU state, partly as worthwhile cleanup, but mostly to
     pave the way for tracking per-root TLB flushes, and elide EPT
     flushes on pCPU migration if the root is clean from a previous
     flush

   - Add a few missing nested consistency checks

   - Rip out support for doing "early" consistency checks via hardware
     as the functionality hasn't been used in years and is no longer
     useful in general; replace it with an off-by-default module param
     to WARN if hardware fails a check that KVM does not perform

   - Fix a currently-benign bug where KVM would drop the guest's
     SPEC_CTRL[63:32] on VM-Enter

   - Misc cleanups

   - Overhaul the TDX code to address systemic races where KVM (acting
     on behalf of userspace) could inadvertantly trigger lock contention
     in the TDX-Module; KVM was either working around these in weird,
     ugly ways, or was simply oblivious to them (though even Yan's
     devilish selftests could only break individual VMs, not the host
     kernel)

   - Fix a bug where KVM could corrupt a vCPU's cpu_list when freeing a
     TDX vCPU, if creating said vCPU failed partway through

   - Fix a few sparse warnings (bad annotation, 0 != NULL)

   - Use struct_size() to simplify copying TDX capabilities to userspace

   - Fix a bug where TDX would effectively corrupt user-return MSR
     values if the TDX Module rejects VP.ENTER and thus doesn't clobber
     host MSRs as expected

  Selftests:

   - Fix a math goof in mmu_stress_test when running on a single-CPU
     system/VM

   - Forcefully override ARCH from x86_64 to x86 to play nice with
     specifying ARCH=x86_64 on the command line

   - Extend a bunch of nested VMX to validate nested SVM as well

   - Add support for LA57 in the core VM_MODE_xxx macro, and add a test
     to verify KVM can save/restore nested VMX state when L1 is using
     5-level paging, but L2 is not

   - Clean up the guest paging code in anticipation of sharing the core
     logic for nested EPT and nested NPT

  guest_memfd:

   - Add NUMA mempolicy support for guest_memfd, and clean up a variety
     of rough edges in guest_memfd along the way

   - Define a CLASS to automatically handle get+put when grabbing a
     guest_memfd from a memslot to make it harder to leak references

   - Enhance KVM selftests to make it easer to develop and debug
     selftests like those added for guest_memfd NUMA support, e.g. where
     test and/or KVM bugs often result in hard-to-debug SIGBUS errors

   - Misc cleanups

  Generic:

   - Use the recently-added WQ_PERCPU when creating the per-CPU
     workqueue for irqfd cleanup

   - Fix a goof in the dirty ring documentation

   - Fix choice of target for directed yield across different calls to
     kvm_vcpu_on_spin(); the function was always starting from the first
     vCPU instead of continuing the round-robin search"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (260 commits)
  KVM: arm64: at: Update AF on software walk only if VM has FEAT_HAFDBS
  KVM: arm64: at: Use correct HA bit in TCR_EL2 when regime is EL2
  KVM: arm64: Document KVM_PGTABLE_PROT_{UX,PX}
  KVM: arm64: Fix spelling mistake "Unexpeced" -> "Unexpected"
  KVM: arm64: Add break to default case in kvm_pgtable_stage2_pte_prot()
  KVM: arm64: Add endian casting to kvm_swap_s[12]_desc()
  KVM: arm64: Fix compilation when CONFIG_ARM64_USE_LSE_ATOMICS=n
  KVM: arm64: selftests: Add test for AT emulation
  KVM: arm64: nv: Expose hardware access flag management to NV guests
  KVM: arm64: nv: Implement HW access flag management in stage-2 SW PTW
  KVM: arm64: Implement HW access flag management in stage-1 SW PTW
  KVM: arm64: Propagate PTW errors up to AT emulation
  KVM: arm64: Add helper for swapping guest descriptor
  KVM: arm64: nv: Use pgtable definitions in stage-2 walk
  KVM: arm64: Handle endianness in read helper for emulated PTW
  KVM: arm64: nv: Stop passing vCPU through void ptr in S2 PTW
  KVM: arm64: Call helper for reading descriptors directly
  KVM: arm64: nv: Advertise support for FEAT_XNX
  KVM: arm64: Teach ptdump about FEAT_XNX permissions
  KVM: s390: Use generic VIRT_XFER_TO_GUEST_WORK functions
  ...
2025-12-05 17:01:20 -08:00
Linus Torvalds 2547f79b0b s390 updates for 6.19 merge window
- Provide a new interface for dynamic configuration and deconfiguration of
   hotplug memory, allowing with and without memmap_on_memory support. This
   makes the way memory hotplug is handled on s390 much more similar to
   other architectures
 
 - Remove compat support. There shouldn't be any compat user space around
   anymore, therefore get rid of a lot of code which also doesn't need to be
   tested anymore
 
 - Add stackprotector support. GCC 16 will get new compiler options, which
   allow to generate code required for kernel stackprotector support
 
 - Merge pai_crypto and pai_ext PMU drivers into a new driver. This removes
   a lot of duplicated code. The new driver is also extendable and allows
   to support new PMUs
 
 - Add driver override support for AP queues
 
 - Rework and extend zcrypt and AP trace events to allow for tracing of
   crypto requests
 
 - Support block sizes larger than 65535 bytes for CCW tape devices
 
 - Since the rework of the virtual kernel address space the module area and
   the kernel image are within the same 4GB area. This eliminates the need
   of weak per cpu variables. Get rid of ARCH_MODULE_NEEDS_WEAK_PER_CPU
 
 - Various other small improvements and fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEECMNfWEw3SLnmiLkZIg7DeRspbsIFAmktZioACgkQIg7DeRsp
 bsK4Rw//VzkvHyzOtGKZ8Hb4S+Sh/PFlaZQXNhj+Xt5gWoOhP1uPmmhBe6LxjYaB
 J9Ns3hpONQ1dTHV7VVkds8FvM/SBcGe8m5RpefmChC/bjm5UEOV/MppKtA0aLnEH
 hJmdubIrrRAXKggxlHEfRLzBsFvV/rJ9Xf16FhRxGDc4pgmgkI1NPQ41/dyCHklQ
 dB3YrFVPIETywVYYVB/G3h11JgF5Z6CKtjYCdSx72Fkbj65+6JPfcPgLKMpcJuPd
 UxUXtCo1FCXlP70jsz8JQI8cdieG0KDQTtnZP4P/pqjQ3wirOqvMewNa9t9xmQ2e
 p6Rc1Vx5DESkq9bRWtQEaprTVVzK7DDLH3RuZwB+uLrcLGD8JvVS6/m9n9CgzBMT
 BnJXG2sLZH+gdQy+DSD/fVDD7OvIk8TGrH+OFwVIKhrT/J3B2E7ZSYyZZCNIS7VG
 yiuypoDGYg3ZpYjH9+qOXWB3nc0vQWrlFzb1bsQu1omJGmunLv4jtTjAKGN82C33
 auBsIYAlQW20X7DV0vZa59PwqwtBqtdQQcTidwtSztzKogRXAdK8KKHtN60JM4S2
 7sWFOFCQaTChAeDNw6MF5EtULb551nwH2RtJ9x3CrJj+OGK6clbQNcxIA7Oy0veR
 Sl9v1lMfeKOgDrPdDy3ArQBJ8WLlF9qX9wLKbiaNyIKmkz2ymkg=
 =CNrb
 -----END PGP SIGNATURE-----

Merge tag 's390-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Heiko Carstens:

 - Provide a new interface for dynamic configuration and deconfiguration
   of hotplug memory, allowing with and without memmap_on_memory
   support. This makes the way memory hotplug is handled on s390 much
   more similar to other architectures

 - Remove compat support. There shouldn't be any compat user space
   around anymore, therefore get rid of a lot of code which also doesn't
   need to be tested anymore

 - Add stackprotector support. GCC 16 will get new compiler options,
   which allow to generate code required for kernel stackprotector
   support

 - Merge pai_crypto and pai_ext PMU drivers into a new driver. This
   removes a lot of duplicated code. The new driver is also extendable
   and allows to support new PMUs

 - Add driver override support for AP queues

 - Rework and extend zcrypt and AP trace events to allow for tracing of
   crypto requests

 - Support block sizes larger than 65535 bytes for CCW tape devices

 - Since the rework of the virtual kernel address space the module area
   and the kernel image are within the same 4GB area. This eliminates
   the need of weak per cpu variables. Get rid of
   ARCH_MODULE_NEEDS_WEAK_PER_CPU

 - Various other small improvements and fixes

* tag 's390-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (92 commits)
  watchdog: diag288_wdt: Remove KMSG_COMPONENT macro
  s390/entry: Use lay instead of aghik
  s390/vdso: Get rid of -m64 flag handling
  s390/vdso: Rename vdso64 to vdso
  s390: Rename head64.S to head.S
  s390/vdso: Use common STABS_DEBUG and DWARF_DEBUG macros
  s390: Add stackprotector support
  s390/modules: Simplify module_finalize() slightly
  s390: Remove KMSG_COMPONENT macro
  s390/percpu: Get rid of ARCH_MODULE_NEEDS_WEAK_PER_CPU
  s390/ap: Restrict driver_override versus apmask and aqmask use
  s390/ap: Rename mutex ap_perms_mutex to ap_attr_mutex
  s390/ap: Support driver_override for AP queue devices
  s390/ap: Use all-bits-one apmask/aqmask for vfio in_use() checks
  s390/debug: Update description of resize operation
  s390/syscalls: Switch to generic system call table generation
  s390/syscalls: Remove system call table pointer from thread_struct
  s390/uapi: Remove 31 bit support from uapi header files
  s390: Remove compat support
  tools: Remove s390 compat support
  ...
2025-12-02 16:37:00 -08:00