Fixes kernel hang during boot due to inability to set up IRQ on AXP313a.
The issue is caused by gpiochip_lock_as_irq() which is failing when gpio
is in uninitialized state.
Solution is to set pinmux to GPIO INPUT in
sunxi_pinctrl_irq_request_resources() if it wasn't initialized
earlier.
Tested on Orange Pi Zero 3.
Fixes: 01e10d0272 ("pinctrl: sunxi: Implement gpiochip::get_direction()")
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Signed-off-by: Michal Piekos <michal.piekos@mmpsystems.pl>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Recent changes in the Allwinner pinctrl/GPIO IP made us add some quirks,
which the new SoCs (A523 family) need to use. We now have a comfortable
"flags" field on the per-SoC setup side, to tag those quirks we need, but
were translating those flag bits into specific fields for runtime use, in
the init routine.
Now the newest Allwinner GPIO IP adds even more quirks and exceptions,
some of a boolean nature.
To avoid inventing various new boolean flags for the runtime struct
sunxi_pinctrl, let's just directly pass on the flags variable used by the
setup code, so runtime can check for those various quirk bits directly.
Rename the "variant" member to "flags", and directly copy the value from
the setup code into there. Move the variant masking from the init
routine to the functions which actually use the "variant" value.
This mostly paves the way for the new A733 IP generation, which needs
more quirks to be checked at runtime.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Michal Piekos <michal.piekos@mmpsystems.pl>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Some pinctrl devices like mt6397 or mt6392 don't support EINT at all, but
the mtk_eint_init function is always called and returns -ENODEV, which
then bubbles up and causes probe failure.
To address this only call mtk_eint_init if EINT pins are present.
Tested on Xiaomi Mi Smart Clock x04g (mt6392).
Fixes: e46df235b4 ("pinctrl: mediatek: refactor EINT related code for all MediaTek pinctrl can fit")
Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The HDP driver uses the generic GPIO chip API, but this configuration
may not be enabled.
Ensure it is enabled by selecting the appropriate option.
Fixes: 4bcff9c05b ("pinctrl: stm32: use new generic GPIO chip API")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The GPIO .get() callback is expected to return 0 or 1 (or a negative
error code). Ensure that the value returned by rza1_gpio_get() is
normalized to the [0, 1] range.
Fixes: 86ef402d80 ("gpiolib: sanitize the return value of gpio_chip::get()")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/aZYnyl-Nf4S1U2yj@google.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
GPIO controller driver should typically implement the .get_direction()
callback as GPIOLIB internals may try to use it to determine the state
of a pin. Since introduction of shared proxy, it prints a warning splat
when using a shared spmi gpio.
The implementation is not easy because the controller supports enabling
the input and output logic at the same time, so we aligns on the
behaviour of the .get() operation and return -EINVAL in other
situations.
Fixes: eadff30244 ("pinctrl: Qualcomm SPMI PMIC GPIO pin controller driver")
Fixes: d7b5f5cc5e ("pinctrl: qcom: spmi-gpio: Add support for GPIO LV/MV subtype")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The rzt2h_gpio_get_direction() function is called from
gpiod_get_direction(), which ends up being used within the __setup_irq()
call stack when requesting an interrupt.
__setup_irq() holds a raw_spinlock_t with IRQs disabled, which creates
an atomic context. spinlock_t cannot be used within atomic context
when PREEMPT_RT is enabled, since it may become a sleeping lock.
An "[ BUG: Invalid wait context ]" splat is observed when running with
CONFIG_PROVE_LOCKING enabled, describing exactly the aforementioned call
stack.
__setup_irq() needs to hold a raw_spinlock_t with IRQs disabled to
serialize access against a concurrent hard interrupt.
Switch to raw_spinlock_t to fix this.
Fixes: 829dde3369 ("pinctrl: renesas: rzt2h: Add GPIO IRQ chip to handle interrupts")
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260205103930.666051-1-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
When calling of_parse_phandle_with_fixed_args(), the caller is
responsible for calling of_node_put() to release the device node
reference.
In rzt2h_gpio_register(), the driver fails to call of_node_put() to
release the reference in of_args.np, which causes a memory leak.
Add the missing of_node_put() call to fix the leak.
Fixes: 34d4d09307 ("pinctrl: renesas: Add support for RZ/T2H")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260127-rzt2h-v1-1-86472e7421b8@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
When code had been changed to use for_each_set_clump8(), it mistakenly
switched from chip->nport to chip->tpin since the cy8c9540 and cy8c9560
have a 4-pin gap. This, in particular, led to the missed read of
the last bank interrupt status register and hence missing interrupts
on those pins. Restore the upper limit in for_each_set_clump8() to take
into consideration that gap.
Fixes: 83e29a7a1f ("pinctrl: cy8c95x0; Switch to use for_each_set_clump8()")
Cc: stable@vger.kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
After commit 471e998c0e ("gpiolib: remove redundant callback check"),
a warning will be printed if the gpio driver does not implement this
callback. The warning was added in commit e623c4303e ("gpiolib:
sanitize the return value of gpio_chip::get_direction()"), but was
masked by the "redundant" check.
The warning can be triggered by any action that calls the callback,
such as dumping the GPIO state from /sys/kernel/debug/gpio.
Implement it for the sunxi driver. This is simply a matter of reading
out the mux value from the registers, then checking if it is one of
the GPIO functions and which direction it is.
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Commit e2c58cbe3a ("pinctrl: rockchip: Simplify locking with
scoped_guard()") added a scoped_guard() over existing code containing a
"break" instruction. That "break" was for the outer (existing)
for-loop, which now exits inner, scoped_guard() loop. If GPIO driver
did not probe, then driver will not bail out, but instead continue to
configure the pin.
Fix the issue by simplifying the code - the break in original code was
leading directly to end of the function returning 0, thus we can simply
return here rockchip_pinconf_defer_pin status.
Reported-by: David Lechner <dlechner@baylibre.com>
Closes: https://lore.kernel.org/r/f5b38942-a584-4e78-a893-de4a219070b2@baylibre.com/
Fixes: e2c58cbe3a ("pinctrl: rockchip: Simplify locking with scoped_guard()")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
devm_add_action_or_reset() already invokes the action on failure,
so the explicit put causes a double-put.
Fixes: 9b07cdf86a ("pinctrl: cirrus: Fix fwnode leak in cs42l43_pin_probe()")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The of_get_parent() function returns a device_node with an incremented
reference count.
Use the __free(device_node) cleanup attribute to ensure of_node_put()
is automatically called when pnode goes out of scope, fixing a
reference leak.
Fixes: 6e9be3abb7 ("pinctrl: Add driver support for Amlogic SoCs")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
File-scope 'sdm660_lpi_pinctrl_groups' and
'sdm660_lpi_pinctrl_functions' are not used outside of this unit, so
make them static to silence sparse warnings:
pinctrl-sdm660-lpass-lpi.c:79:27: warning: symbol 'sdm660_lpi_pinctrl_groups' was not declared. Should it be static?
pinctrl-sdm660-lpass-lpi.c:116:27: warning: symbol 'sdm660_lpi_pinctrl_functions' was not declared. Should it be static?
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
File-scope 'sky1_pinctrl_pm_ops' is not used outside of this unit (and
it should not be!), so unexport it and make it static to silence sparse
warning:
pinctrl-sky1.c:525:25: warning: symbol 'sky1_pinctrl_pm_ops' was not declared. Should it be static?
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
File-scope 'amdisp_pinctrl_ops' is not used outside of this unit, so
make it static to silence sparse warning:
pinctrl-amdisp.c:83:26: warning: symbol 'amdisp_pinctrl_ops' was not declared. Should it be static?
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
In pinconf_generic_parse_dt_config(), if parse_dt_cfg() fails, it returns
directly. This bypasses the cleanup logic and results in a memory leak of
the cfg buffer.
Fix this by jumping to the out label on failure, ensuring kfree(cfg) is
called before returning.
Fixes: 90a18c5128 ("pinctrl: pinconf-generic: Handle string values for generic properties")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Wakeup capable GPIOs uses PDC as parent IRQ chip and PDC on qcs615 do not
support dual edge IRQs. Add missing wakeirq_dual_edge_errata configuration
to enable workaround for dual edge GPIO IRQs.
Fixes: b698f36a9d ("pinctrl: qcom: add the tlmm driver for QCS615 platform")
Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Core changes:
- Drop the unused devm_pinctrl_unregister() function.
- Move pretended generic pin control functionality out of the
core and into the Amlogic AM4 driver. We have something better
coming (hopefully).
New hardware support:
- Spacemit K3 (RISC-V) pin control support.
- Atmel AT91 PIO4 (ARM32) SAMA7D65 pin control support.
- Exynos9610 (ARM64) pin control support.
- Qualcomm Mahua TLMM (ARM64) pin control support.
- Microchip Polarfire MSSIO (RISC-V) pin control support.
- Ocelot LAN9645XF (multiplatform) pin control support.
Improvements:
- Using a few more guards for locking.
- Various nonurgent fixes and tweaks.
-----BEGIN PGP SIGNATURE-----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=lmwJ
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Core changes:
- Drop the unused devm_pinctrl_unregister() function
- Move pretended generic pin control functionality out of the core
and into the Amlogic AM4 driver. We have something better coming
(hopefully)
New hardware support:
- Spacemit K3 (RISC-V) pin control support
- Atmel AT91 PIO4 (ARM32) SAMA7D65 pin control support
- Exynos9610 (ARM64) pin control support
- Qualcomm Mahua TLMM (ARM64) pin control support
- Microchip Polarfire MSSIO (RISC-V) pin control support
- Ocelot LAN9645XF (multiplatform) pin control support
Improvements:
- Using a few more guards for locking
- Various nonurgent fixes and tweaks"
* tag 'pinctrl-v7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (73 commits)
pinctrl: generic: move function to amlogic-am4 driver
pinctrl: intel: Align Copyright note with corporate guidelines
pinctrl: mediatek: remove unused drv_offset field
pinctrl: canaan: k230: Fix NULL pointer dereference when parsing devicetree
pinctrl: single: fix refcount leak in pcs_add_gpio_func()
pinctrl: meson: amlogic-a4: Fix device node reference leak in bank helpers
pinctrl: qcom: sm8250-lpass-lpi: Fix i2s2_data_groups definition
pinctrl: core: Remove duplicate error messages
pinctrl: core: Simplify devm_pinctrl_*()
pinctrl: core: Remove unused devm_pinctrl_unregister()
dt-bindings: pinctrl: spacemit: fix drive-strength check warning
pinctrl: fix kismet issues with GENERIC_PINCTRL
pinctrl: tangier: Join tng_pinctrl_probe() into its wrapper
pinctrl: tangier: Remove duplicate error messages
pinctrl: lynxpoint: Remove duplicate error messages
pinctrl: cherryview: Remove duplicate error messages
pinctrl: baytrail: Remove duplicate error messages
pinctrl: intel: Remove duplicate error messages
pinctrl: equilibrium: Fix device node reference leak in pinbank_init()
dt-bindings: pinctrl: pinctrl-microchip-sgpio: add LAN969x
...
-----BEGIN PGP SIGNATURE-----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=ZT9I
-----END PGP SIGNATURE-----
Merge tag 'mips_7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
"Cleanups and fixes"
* tag 'mips_7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (28 commits)
Revert "clk: microchip: core: allow driver to be compiled with COMPILE_TEST"
Revert "clk: microchip: fix typo in reference to a config option"
MIPS: Implement ARCH_HAS_CC_CAN_LINK
MIPS: rb532: Fix MMIO UART resource registration
MIPS: Work around LLVM bug when gp is used as global register variable
MIPS: Loongson64: env: Fixup serial clock-frequency when using LEFI
MIPS: Loongson2ef: Use pcibios_align_resource() to block io range
MIPS: Loongson2ef: Register PCI controller in early stage
clk: microchip: fix typo in reference to a config option
MIPS: Loongson64: dts: fix phy-related definition of LS7A GMAC
clk: microchip: core: allow driver to be compiled with COMPILE_TEST
MIPS: drop unused pic32.h header
watchdog: pic32-wdt: update include to use pic32.h from platform_data
watchdog: pic32-dmt: update include to use pic32.h from platform_data
serial: pic32_uart: update include to use pic32.h from platform_data
rtc: pic32: update include to use pic32.h from platform_data
pinctrl: pic32: update include to use pic32.h from platform_data
mmc: sdhci-pic32: update include to use pic32.h from platform_data
irqchip/irq-pic32-evic: update include to use pic32.h from platform_data
clk: microchip: core: update include to use pic32.h from platform_data
...
pinconf_generic_dt_node_to_map_pinmux() is not actually a generic
function, and really belongs in the amlogic-am4 driver. There are three
reasons why.
First, and least, of the reasons is that this function behaves
differently to the other dt_node_to_map functions in a way that is not
obvious from a first glance. This difference stems for the devicetree
properties that the function is intended for use with, and how they are
typically used. The other generic dt_node_to_map functions support
platforms where the pins, groups and functions are described statically
in the driver and require a function that will produce a mapping from dt
nodes to these pre-established descriptions. No other code in the driver
is require to be executed at runtime.
pinconf_generic_dt_node_to_map_pinmux() on the other hand is intended for
use with the pinmux property, where groups and functions are determined
entirely from the devicetree. As a result, there are no statically
defined groups and functions in the driver for this function to perform
a mapping to. Other drivers that use the pinmux property (e.g. the k1)
their dt_node_to_map function creates the groups and functions as the
devicetree is parsed. Instead of that,
pinconf_generic_dt_node_to_map_pinmux() requires that the devicetree is
parsed twice, once by it and once at probe, so that the driver
dynamically creates the groups and functions before the dt_node_to_map
callback is executed. I don't believe this double parsing requirement is
how developers would expect this to work and is not necessary given
there are drivers that do not have this behaviour.
Secondly and thirdly, the function bakes in some assumptions that only
really match the amlogic platform about how the devicetree is constructed.
These, to me, are problematic for something that claims to be generic.
The other dt_node_to_map implementations accept a being called for
either a node containing pin configuration properties or a node
containing child nodes that each contain the configuration properties.
IOW, they support the following two devicetree configurations:
| cfg {
| label: group {
| pinmux = <asjhdasjhlajskd>;
| config-item1;
| };
| };
| label: cfg {
| group1 {
| pinmux = <dsjhlfka>;
| config-item2;
| };
| group2 {
| pinmux = <lsdjhaf>;
| config-item1;
| };
| };
pinconf_generic_dt_node_to_map_pinmux() only supports the latter.
The other assumption about devicetree configuration that the function
makes is that the labeled node's parent is a "function node". The amlogic
driver uses these "function nodes" to create the functions at probe
time, and pinconf_generic_dt_node_to_map_pinmux() finds the parent of
the node it is operating on's name as part of the mapping. IOW, it
requires that the devicetree look like:
| pinctrl@bla {
|
| func-foo {
| label: group-default {
| pinmuxes = <lskdf>;
| };
| };
| };
and couldn't be used if the nodes containing the pinmux and
configuration properties are children of the pinctrl node itself:
| pinctrl@bla {
|
| label: group-default {
| pinmuxes = <lskdf>;
| };
| };
These final two reasons are mainly why I believe this is not suitable as
a generic function, and should be moved into the driver that is the sole
user and originator of the "generic" function.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The Copyright note must follow the
Copyright (C) <year(s)> Intel Corporation
template, where (C) is always capitalised and <year(s)> either
a single year or a range. Update the Intel pin control drivers
to follow.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The 'drv_offset' member in 'struct mtk_pinctrl_devdata' has been unused
since the driver's inception. Drive strength control for MediaTek
pinctrl drivers is actually configured via 'pin_drv_grp',
making this specific offset field redundant.
Remove the unused field from the common 'mtk_pinctrl_devdata' structure
and its corresponding initialization in the mt8365 driver to clean up
the code and avoid confusion.
Signed-off-by: Akari Tsuyukusa <akkun11.open@gmail.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
When probing the k230 pinctrl driver, the kernel triggers a NULL pointer
dereference. The crash trace showed:
[ 0.732084] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000068
[ 0.740737] ...
[ 0.776296] epc : k230_pinctrl_probe+0x1be/0x4fc
In k230_pinctrl_parse_functions(), we attempt to retrieve the device
pointer via info->pctl_dev->dev, but info->pctl_dev is only initialized
after k230_pinctrl_parse_dt() completes.
At the time of DT parsing, info->pctl_dev is still NULL, leading to
the invalid dereference of info->pctl_dev->dev.
Use the already available device pointer from platform_device
instead of accessing through uninitialized pctl_dev.
Fixes: d94a32ac68 ("pinctrl: canaan: k230: Fix order of DT parse and pinctrl register")
Signed-off-by: Jiayu Du <jiayu.riscv@isrc.iscas.ac.cn>
Signed-off-by: Linus Walleij <linusw@kernel.org>
of_parse_phandle_with_args() returns a device_node pointer with refcount
incremented in gpiospec.np. The loop iterates through all phandles but
never releases the reference, causing a refcount leak on each iteration.
Add of_node_put() calls to release the reference after extracting the
needed arguments and on the error path when devm_kzalloc() fails.
This bug was detected by our static analysis tool and verified by my
code review.
Fixes: a1a277eb76 ("pinctrl: single: create new gpio function range")
Signed-off-by: Wei Li <unsw.weili@gmail.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
of_parse_phandle_with_fixed_args() increments the reference count of the
returned device node, so it must be explicitly released using
of_node_put() after use.
Fix the reference leak in aml_bank_pins() and aml_bank_number() by
adding the missing of_node_put() calls.
Fixes: 6e9be3abb7 ("pinctrl: Add driver support for Amlogic SoCs")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The i2s2_data function is available on both gpio12 and gpio13. Fix the
groups definition.
Fixes: 6e261d1090 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
pinctrl_claim_hogs() is covered to report any error via message.
Since that it's not needed in the callers.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Use devm_add_action_or_reset() instead of devres_alloc() and
devres_add(), which works the same. This will simplify the
code. There is no functional changes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
There are no users, drop it for good.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
lkp reported that GENERIC_PINCTRL can be select when its dependencies
are not. Swap the "depends on" out for "select", as is used in other
parts of the pinctrl core that are expected to be selected by drivers.
Fixes: 43722575e5 ("pinctrl: add generic functions + pins mapper")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202601271725.gqlQ8Jl7-lkp@intel.com/
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linusw@kernel.org>
- don't call into pinctrl when setting direction in gpio-rockchip as it's
not needed and may trigger locking context errors
- change spinlock to raw_spinlock in gpio-sprd
- fix a use-after-free bug in gpio-virtuser
- don't register a driver from another driver's probe() in gpio-omap
- fix int width problems in GPIO ACPI code
- fix interrupt-to-pin mapping in gpio-brcmstb
- mask interrupts in irq shutdown in gpio-pca953x
-----BEGIN PGP SIGNATURE-----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=KCJE
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"Over the last week I received quite an unexpected (for rc7) number of
fixes but they are all pretty small and mostly limited to drivers:
- don't call into pinctrl when setting direction in gpio-rockchip as
it's not needed and may trigger locking context errors
- change spinlock to raw_spinlock in gpio-sprd
- fix a use-after-free bug in gpio-virtuser
- don't register a driver from another driver's probe() in gpio-omap
- fix int width problems in GPIO ACPI code
- fix interrupt-to-pin mapping in gpio-brcmstb
- mask interrupts in irq shutdown in gpio-pca953x"
* tag 'gpio-fixes-for-v6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: acpi: Fix potential out-of-boundary left shift
gpio: brcmstb: correct hwirq to bank map
gpio: omap: do not register driver in probe()
gpio: pca953x: mask interrupts in irq shutdown
gpio: virtuser: fix UAF in configfs release path
gpiolib: acpi: use BIT_ULL() for u64 mask in address space handler
gpio: sprd: Change sprd_gpio lock to raw_spin_lock
gpio: rockchip: Stop calling pinctrl for set_direction
Use the linux/platform_data/pic32.h include instead of
asm/mach-pic32/pic32.h so that the asm variant can be dropped. This
is in preparation for allowing some drivers to be compiled on other
architectures with COMPILE_TEST enabled.
Acked-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
There is no clear sign why we have tng_pinctrl_probe() in the first
place when it has already been using managed calls. Join the function
into its devm_tng_pinctrl_probe() wrapper.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The pin control core is covered to report any error via message.
Since that it's not needed in the callers.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The pin control core is covered to report any error via message.
Since that it's not needed in the callers.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The pin control core is covered to report any error via message.
Since that it's not needed in the callers.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The pin control core is covered to report any error via message.
Since that it's not needed in the callers.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The pin control core is covered to report any error via message.
Since that it's not needed in the callers.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When calling of_parse_phandle_with_fixed_args(), the caller is
responsible to call of_node_put() to release the reference of device
node.
In pinbank_init(), the reference of the node obtained from the
"gpio-ranges" property is never released, resulting in a reference
count leak.
Add the missing of_node_put() call to fix the leak.
Fixes: 1948d5c51d ("pinctrl: Add pinmux & GPIO controller driver for a new SoC")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
* Add Nova Lake to the list of supported platforms by platform driver
* Update Kconfig help text to clarify which drivers supports which platforms
* Convert more Intel pin control drivers to use intel_gpio_add_pin_ranges()
-----BEGIN PGP SIGNATURE-----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=ReWs
-----END PGP SIGNATURE-----
Merge tag 'intel-pinctrl-v6.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel
intel-pinctrl for v6.20-1
* Add Nova Lake to the list of supported platforms by platform driver
* Update Kconfig help text to clarify which drivers supports which platforms
* Convert more Intel pin control drivers to use intel_gpio_add_pin_ranges()
Signed-off-by: Linus Walleij <linusw@kernel.org>
GPIO controller driver should typically implement the .get_direction()
callback as GPIOLIB internals may try to use it to determine the state
of a pin. Add it for the LPASS LPI driver.
Reported-by: Abel Vesa <abelvesa@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 6e261d1090 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> # X1E CRD
Tested-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Michal Piekos
Andre Przywara
Luca Leonardo Scorcia
Amelie Delaunay
Linus Walleij
Dmitry Torokhov
Neil Armstrong
Cosmin Tanislav
Felix Gu
Andy Shevchenko
Chen-Yu Tsai
Krzysztof Kozlowski
Maulik Shah
Florian Eckert
Linus Torvalds
Kees Cook
Conor Dooley
Akari Tsuyukusa
Jiayu Du
Wei Li
Luca Weiss
Brian Masney
Bartosz Golaszewski
Jens Emil Schulz Østergaard