The alternate screen support added by commit 23743ba647 ("vt: add
support for smput/rmput escape codes") only saves and restores the
regular screen buffer (vc_origin), but completely ignores the corresponding
unicode screen buffer (vc_uni_lines) creating a messed-up display.
Add vc_saved_uni_lines to save the unicode screen buffer when entering
the alternate screen, and restore it when leaving. Also ensure proper
cleanup in reset_terminal() and vc_deallocate().
Fixes: 23743ba647 ("vt: add support for smput/rmput escape codes")
Cc: stable <stable@kernel.org>
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://patch.msgid.link/5o2p6qp3-91pq-0p17-or02-1oors4417ns7@onlyvoer.pbz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DW UART cannot write to LCR, DLL, and DLH while BUSY is asserted.
Existance of BUSY depends on uart_16550_compatible, if UART HW is
configured with it those registers can always be written.
There currently is dw8250_force_idle() which attempts to achieve
non-BUSY state by disabling FIFO, however, the solution is unreliable
when Rx keeps getting more and more characters.
Create a sequence of operations that ensures UART cannot keep BUSY
asserted indefinitely. The new sequence relies on enabling loopback mode
temporarily to prevent incoming Rx characters keeping UART BUSY.
Ensure no Tx in ongoing while the UART is switches into the loopback
mode (requires exporting serial8250_fifo_wait_for_lsr_thre() and adding
DMA Tx pause/resume functions).
According to tests performed by Adriana Nicolae <adriana@arista.com>,
simply disabling FIFO or clearing FIFOs only once does not always
ensure BUSY is deasserted but up to two tries may be needed. This could
be related to ongoing Rx of a character (a guess, not known for sure).
Therefore, retry FIFO clearing a few times (retry limit 4 is arbitrary
number but using, e.g., p->fifosize seems overly large). Tests
performed by others did not exhibit similar challenge but it does not
seem harmful to leave the FIFO clearing loop in place for all DW UARTs
with BUSY functionality.
Use the new dw8250_idle_enter/exit() to do divisor writes and LCR
writes. In case of plain LCR writes, opportunistically try to update
LCR first and only invoke dw8250_idle_enter() if the write did not
succeed (it has been observed that in practice most LCR writes do
succeed without complications).
This issue was first reported by qianfan Zhao who put lots of debugging
effort into understanding the solution space.
Fixes: c49436b657 ("serial: 8250_dw: Improve unwritable LCR workaround")
Fixes: 7d4008ebb1 ("tty: add a DesignWare 8250 driver")
Cc: stable <stable@kernel.org>
Reported-by: qianfan Zhao <qianfanguijin@163.com>
Link: https://lore.kernel.org/linux-serial/289bb78a-7509-1c5c-2923-a04ed3b6487d@163.com/
Reported-by: Adriana Nicolae <adriana@arista.com>
Link: https://lore.kernel.org/linux-serial/20250819182322.3451959-1-adriana@arista.com/
Reported-by: Bandal, Shankar <shankar.bandal@intel.com>
Tested-by: Bandal, Shankar <shankar.bandal@intel.com>
Tested-by: Murthy, Shanth <shanth.murthy@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20260203171049.4353-8-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When DW UART is !uart_16550_compatible, it can indicate BUSY at any
point (when under constant Rx pressure) unless a complex sequence of
steps is performed. Any LCR write can run a foul with the condition
that prevents writing LCR while the UART is BUSY, which triggers
BUSY_DETECT interrupt that seems unmaskable using IER bits.
Normal flow is that dw8250_handle_irq() handles BUSY_DETECT condition
by reading USR register. This BUSY feature, however, breaks the
assumptions made in serial8250_do_shutdown(), which runs
synchronize_irq() after clearing IER and assumes no interrupts can
occur after that point but then proceeds to update LCR, which on DW
UART can trigger an interrupt.
If serial8250_do_shutdown() releases the interrupt handler before the
handler has run and processed the BUSY_DETECT condition by read the USR
register, the IRQ is not deasserted resulting in interrupt storm that
triggers "irq x: nobody cared" warning leading to disabling the IRQ.
Add late synchronize_irq() into serial8250_do_shutdown() to ensure
BUSY_DETECT from DW UART is handled before port's interrupt handler is
released. Alternative would be to add DW UART specific shutdown
function but it would mostly duplicate the generic code and the extra
synchronize_irq() seems pretty harmless in serial8250_do_shutdown().
Fixes: 7d4008ebb1 ("tty: add a DesignWare 8250 driver")
Cc: stable <stable@kernel.org>
Reported-by: Bandal, Shankar <shankar.bandal@intel.com>
Tested-by: Bandal, Shankar <shankar.bandal@intel.com>
Tested-by: Murthy, Shanth <shanth.murthy@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20260203171049.4353-7-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
INTC10EE UART can end up into an interrupt storm where it reports
IIR_NO_INT (0x1). If the storm happens during active UART operation, it
is promptly stopped by IIR value change due to Rx or Tx events.
However, when there is no activity, either due to idle serial line or
due to specific circumstances such as during shutdown that writes
IER=0, there is nothing to stop the storm.
During shutdown the storm is particularly problematic because
serial8250_do_shutdown() calls synchronize_irq() that will hang in
waiting for the storm to finish which never happens.
This problem can also result in triggering a warning:
irq 45: nobody cared (try booting with the "irqpoll" option)
[...snip...]
handlers:
serial8250_interrupt
Disabling IRQ #45
Normal means to reset interrupt status by reading LSR, MSR, USR, or RX
register do not result in the UART deasserting the IRQ.
Add a quirk to INTC10EE UARTs to enable Tx interrupts if UART's Tx is
currently empty and inactive. Rework IIR_NO_INT to keep track of the
number of consecutive IIR_NO_INT, and on fourth one perform the quirk.
Enabling Tx interrupts should change IIR value from IIR_NO_INT to
IIR_THRI which has been observed to stop the storm.
Fixes: e92fad0249 ("serial: 8250_dw: Add ACPI ID for Granite Rapids-D UART")
Cc: stable <stable@kernel.org>
Reported-by: Bandal, Shankar <shankar.bandal@intel.com>
Tested-by: Bandal, Shankar <shankar.bandal@intel.com>
Tested-by: Murthy, Shanth <shanth.murthy@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20260203171049.4353-6-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dw8250_handle_irq() takes port's lock multiple times with no good
reason to release it in between and calls serial8250_handle_irq()
that also takes port's lock.
Take port's lock only once in dw8250_handle_irq() and use
serial8250_handle_irq_locked() to avoid releasing port's lock in
between.
As IIR_NO_INT check in serial8250_handle_irq() was outside of port's
lock, it has to be done already in dw8250_handle_irq().
DW UART can, in addition to IIR_NO_INT, report BUSY_DETECT (0x7) which
collided with the IIR_NO_INT (0x1) check in serial8250_handle_irq()
(because & is used instead of ==) meaning that no other work is done by
serial8250_handle_irq() during an BUSY_DETECT interrupt.
This allows reorganizing code in dw8250_handle_irq() to do both
IIR_NO_INT and BUSY_DETECT handling right at the start simplifying
the logic.
Tested-by: Bandal, Shankar <shankar.bandal@intel.com>
Tested-by: Murthy, Shanth <shanth.murthy@intel.com>
Cc: stable <stable@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20260203171049.4353-5-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8250_port exports serial8250_handle_irq() to HW specific 8250 drivers.
It takes port's lock within but a HW specific 8250 driver may want to
take port's lock itself, do something, and then call the generic
handler in 8250_port but to do that, the caller has to release port's
lock for no good reason.
Introduce serial8250_handle_irq_locked() which a HW specific driver can
call while already holding port's lock.
As this is new export, put it straight into a namespace (where all 8250
exports should eventually be moved).
Tested-by: Bandal, Shankar <shankar.bandal@intel.com>
Tested-by: Murthy, Shanth <shanth.murthy@intel.com>
Cc: stable <stable@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20260203171049.4353-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When DW UART is configured with BUSY flag, LCR writes may not always
succeed which can make any LCR write complex and very expensive.
Performing write directly can trigger IRQ and the driver has to perform
complex and distruptive sequence while retrying the write.
Therefore, it's better to avoid doing LCR write that would not change
the value of the LCR register. Add LCR write avoidance code into the
8250_dw driver's .serial_out() functions.
Reported-by: Bandal, Shankar <shankar.bandal@intel.com>
Tested-by: Bandal, Shankar <shankar.bandal@intel.com>
Tested-by: Murthy, Shanth <shanth.murthy@intel.com>
Cc: stable <stable@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20260203171049.4353-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 8250_dw driver needs to potentially perform very complex operations
during LCR writes because its BUSY handling prevents updates to LCR
while UART is BUSY (which is not fully under our control without those
complex operations). Thus, LCR writes should occur under port's lock.
Move LCR write under port's lock in serial8250_do_shutdown(). Also
split the LCR RMW so that the logic is on a separate line for clarity.
Reported-by: Bandal, Shankar <shankar.bandal@intel.com>
Tested-by: Bandal, Shankar <shankar.bandal@intel.com>
Tested-by: Murthy, Shanth <shanth.murthy@intel.com>
Cc: stable <stable@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20260203171049.4353-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is found in popular brands such as StarTech.com or Delock, and has
been a source of frustration to quite a few people, if I can trust
Amazon comments complaining about Linux support via the official
out-of-the-tree driver.
Signed-off-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260309-8250_pci_ax99100-v1-1-3328bdfd8e94@mupuf.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
uart_write_room() and uart_write() behave inconsistently when
xmit_buf is NULL (which happens for PORT_UNKNOWN ports that were
never properly initialized):
- uart_write_room() returns kfifo_avail() which can be > 0
- uart_write() checks xmit_buf and returns 0 if NULL
This inconsistency causes an infinite loop in drivers that rely on
tty_write_room() to determine if they can write:
while (tty_write_room(tty) > 0) {
written = tty->ops->write(...);
// written is always 0, loop never exits
}
For example, caif_serial's handle_tx() enters an infinite loop when
used with PORT_UNKNOWN serial ports, causing system hangs.
Fix by making uart_write_room() also check xmit_buf and return 0 if
it's NULL, consistent with uart_write().
Reproducer: https://gist.github.com/mrpre/d9a694cc0e19828ee3bc3b37983fde13
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260204074327.226165-1-jiayuan.chen@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ulite_probe() calls pm_runtime_put_autosuspend() at the end of probe
without holding a corresponding PM runtime reference for non-console
ports.
During ulite_assign(), uart_add_one_port() triggers uart_configure_port()
which calls ulite_pm() via uart_change_pm(). For non-console ports, the
UART core performs a balanced get/put cycle:
uart_change_pm(ON) -> ulite_pm() -> pm_runtime_get_sync() +1
uart_change_pm(OFF) -> ulite_pm() -> pm_runtime_put_autosuspend() -1
This leaves no spare reference for the pm_runtime_put_autosuspend() at
the end of probe. The PM runtime core prevents the count from actually
going below zero, and instead triggers a
"Runtime PM usage count underflow!" warning.
For console ports the bug is masked: the UART core skips the
uart_change_pm(OFF) call, so the UART core's unbalanced get happens to
pair with probe's trailing put.
Add pm_runtime_get_noresume() before pm_runtime_enable() to take an
explicit probe-owned reference that the trailing
pm_runtime_put_autosuspend() can release. This ensures a correct usage
count regardless of whether the port is a console.
Fixes: 5bbe10a694 ("tty: serial: uartlite: Add runtime pm support")
Cc: stable <stable@kernel.org>
Signed-off-by: Maciej Andrzejewski ICEYE <maciej.andrzejewski@m-works.net>
Link: https://patch.msgid.link/20260305123746.4152800-1-maciej.andrzejewski@m-works.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 039d492637 ("serial: 8250: Toggle IER bits on only after irq
has been set up") moved IRQ setup before the THRE test, in combination
with commit 205d300aea ("serial: 8250: change lock order in
serial8250_do_startup()") the interrupt handler can run during the
test and race with its IIR reads. This can produce wrong THRE test
results and cause spurious registration of the
serial8250_backup_timeout timer. Unconditionally disable the IRQ for
the short duration of the test and re-enable it afterwards to avoid
the race.
Fixes: 039d492637 ("serial: 8250: Toggle IER bits on only after irq has been set up")
Depends-on: 205d300aea ("serial: 8250: change lock order in serial8250_do_startup()")
Cc: stable <stable@kernel.org>
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Alban Bedel <alban.bedel@lht.dlh.de>
Tested-by: Maximilian Lueer <maximilian.lueer@lht.dlh.de>
Link: https://patch.msgid.link/20260224121639.579404-1-alban.bedel@lht.dlh.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`dmaengine_terminate_async` does not guarantee that the
`__dma_tx_complete` callback will run. The callback is currently the
only place where `dma->tx_running` gets cleared. If the transaction is
canceled and the callback never runs, then `dma->tx_running` will never
get cleared and we will never schedule new TX DMA transactions again.
This change makes it so we clear `dma->tx_running` after we terminate
the DMA transaction. This is "safe" because `serial8250_tx_dma_flush`
is holding the UART port lock. The first thing the callback does is also
grab the UART port lock, so access to `dma->tx_running` is serialized.
Fixes: 9e512eaaf8 ("serial: 8250: Fix fifo underflow on flush")
Cc: stable <stable@kernel.org>
Signed-off-by: Raul E Rangel <rrangel@google.com>
Link: https://patch.msgid.link/20260209135815.1.I16366ecb0f62f3c96fe3dd5763fcf6f3c2b4d8cd@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Here is the small amount of tty and serial driver updates for 7.0-rc1.
Nothing major in here at all, just some driver updates and minor tweaks
and cleanups including:
- sh-sci serial driver updates
- 8250 driver updates
- attempt to make the tty ports have their own workqueue, but was
reverted after testing found it to have problems on some platforms.
This will probably come back for 7.1 after it has been reworked and
resubmitted
- other tiny tty driver changes
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaZR1VQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykfsACghiyMgr0XKVDFEpV7/fPzocKH+o0An3v8knSi
kLz/f6LstVsISqCxeT+9
=uozB
-----END PGP SIGNATURE-----
Merge tag 'tty-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the small amount of tty and serial driver updates for 7.0-rc1.
Nothing major in here at all, just some driver updates and minor
tweaks and cleanups including:
- sh-sci serial driver updates
- 8250 driver updates
- attempt to make the tty ports have their own workqueue, but was
reverted after testing found it to have problems on some platforms.
This will probably come back for 7.1 after it has been reworked and
resubmitted
- other tiny tty driver changes
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (49 commits)
Revert "tty: tty_port: add workqueue to flip TTY buffer"
tty: tty_port: add workqueue to flip TTY buffer
serial: 8250_pci: Remove custom deprecated baud setting routine
serial: 8250_omap: Remove custom deprecated baud setting routine
dt-bindings: serial: renesas,scif: Document RZ/G3L SoC
serial: 8250: omap: set out-of-band wakeup if wakeup pinctrl exists
tty: hvc-iucv: Remove KMSG_COMPONENT macro
dt-bindings: serial: google,goldfish-tty: Convert to DT schema
dt-bindings: serial: sh-sci: Fold single-entry compatibles into enum
serial: 8250: 8250_omap.c: Clear DMA RX running status only after DMA termination is done
serial: 8250: 8250_omap.c: Add support for handling UART error conditions
serial: SH_SCI: improve "DMA support" prompt
serial: Kconfig: fix ordering of entries for menu display
serial: 8250: fix ordering of entries for menu display
serial: imx: change SERIAL_IMX_CONSOLE to bool
8250_men_mcb: drop unneeded MODULE_ALIAS
serial: men_z135_uart: drop unneeded MODULE_ALIAS
dt-bindings: serial: renesas,rsci: Document RZ/V2H(P) and RZ/V2N SoCs
serial: rsci: Convert to FIELD_MODIFY()
dt-bindings: serial: 8250: add SpacemiT K3 UART compatible
...
-----BEGIN PGP SIGNATURE-----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=ZT9I
-----END PGP SIGNATURE-----
Merge tag 'mips_7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
"Cleanups and fixes"
* tag 'mips_7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (28 commits)
Revert "clk: microchip: core: allow driver to be compiled with COMPILE_TEST"
Revert "clk: microchip: fix typo in reference to a config option"
MIPS: Implement ARCH_HAS_CC_CAN_LINK
MIPS: rb532: Fix MMIO UART resource registration
MIPS: Work around LLVM bug when gp is used as global register variable
MIPS: Loongson64: env: Fixup serial clock-frequency when using LEFI
MIPS: Loongson2ef: Use pcibios_align_resource() to block io range
MIPS: Loongson2ef: Register PCI controller in early stage
clk: microchip: fix typo in reference to a config option
MIPS: Loongson64: dts: fix phy-related definition of LS7A GMAC
clk: microchip: core: allow driver to be compiled with COMPILE_TEST
MIPS: drop unused pic32.h header
watchdog: pic32-wdt: update include to use pic32.h from platform_data
watchdog: pic32-dmt: update include to use pic32.h from platform_data
serial: pic32_uart: update include to use pic32.h from platform_data
rtc: pic32: update include to use pic32.h from platform_data
pinctrl: pic32: update include to use pic32.h from platform_data
mmc: sdhci-pic32: update include to use pic32.h from platform_data
irqchip/irq-pic32-evic: update include to use pic32.h from platform_data
clk: microchip: core: update include to use pic32.h from platform_data
...
do_con_write(), fbcon_redraw.*() invoke console_conditional_schedule()
which is a conditional scheduling point based on printk's internal
variables console_may_schedule. It may only be used if the console lock
is acquired for instance via console_lock() or console_trylock().
Prinkt sets the internal variable to 1 (and allows to schedule)
if the console lock has been acquired via console_lock(). The trylock
does not allow it.
The console_conditional_schedule() invocation in do_con_write() is
invoked shortly before console_unlock().
The console_conditional_schedule() invocation in fbcon_redraw.*()
original from fbcon_scroll() / vt's con_scroll() which originate from a
line feed.
In console_unlock() the variable is set to 0 (forbids to schedule) and
it tries to schedule while making progress printing. This is brand new
compared to when console_conditional_schedule() was added in v2.4.9.11.
In v2.6.38-rc3, console_unlock() (started its existence) iterated over
all consoles and flushed them with disabled interrupts. A scheduling
attempt here was not possible, it relied that a long print scheduled
before console_unlock().
Since commit 8d91f8b153 ("printk: do cond_resched() between lines
while outputting to consoles"), which appeared in v4.5-rc1,
console_unlock() attempts to schedule if it was allowed to schedule
while during console_lock(). Each record is idealy one line so after
every line feed.
This console_conditional_schedule() is also only relevant on
PREEMPT_NONE and PREEMPT_VOLUNTARY builds. In other configurations
cond_resched() becomes a nop and has no impact.
I'm bringing this all up just proof that it is not required anymore. It
becomes a problem on a PREEMPT_RT build with debug code enabled because
that might_sleep() in cond_resched() remains and triggers a warnings.
This is due to
legacy_kthread_func-> console_flush_one_record -> vt_console_print-> lf
-> con_scroll -> fbcon_scroll
and vt_console_print() acquires a spinlock_t which does not allow a
voluntary schedule. There is no need to fb_scroll() to schedule since
console_flush_one_record() attempts to schedule after each line.
!PREEMPT_RT is not affected because the legacy printing thread is only
enabled on PREEMPT_RT builds.
Therefore I suggest to remove console_conditional_schedule().
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Fixes: 5f53ca3ff8 ("printk: Implement legacy printer kthread for PREEMPT_RT")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Petr Mladek <pmladek@suse.com> # from printk() POV
Signed-off-by: Helge Deller <deller@gmx.de>
Total patches: 107
Reviews/patch: 1.07
Reviewed rate: 67%
- The 2 patch series "ocfs2: give ocfs2 the ability to reclaim
suballocator free bg" from Heming Zhao saves disk space by teaching
ocfs2 to reclaim suballocator block group space.
- The 4 patch series "Add ARRAY_END(), and use it to fix off-by-one
bugs" from Alejandro Colomar adds the ARRAY_END() macro and uses it in
various places.
- The 2 patch series "vmcoreinfo: support VMCOREINFO_BYTES larger than
PAGE_SIZE" from Pnina Feder makes the vmcore code future-safe, if
VMCOREINFO_BYTES ever exceeds the page size.
- The 7 patch series "kallsyms: Prevent invalid access when showing
module buildid" from Petr Mladek cleans up kallsyms code related to
module buildid and fixes an invalid access crash when printing
backtraces.
- The 3 patch series "Address page fault in
ima_restore_measurement_list()" from Harshit Mogalapalli fixes a
kexec-related crash that can occur when booting the second-stage kernel
on x86.
- The 6 patch series "kho: ABI headers and Documentation updates" from
Mike Rapoport updates the kexec handover ABI documentation.
- The 4 patch series "Align atomic storage" from Finn Thain adds the
__aligned attribute to atomic_t and atomic64_t definitions to get
natural alignment of both types on csky, m68k, microblaze, nios2,
openrisc and sh.
- The 2 patch series "kho: clean up page initialization logic" from
Pratyush Yadav simplifies the page initialization logic in
kho_restore_page().
- The 6 patch series "Unload linux/kernel.h" from Yury Norov moves
several things out of kernel.h and into more appropriate places.
- The 7 patch series "don't abuse task_struct.group_leader" from Oleg
Nesterov removes the usage of ->group_leader when it is "obviously
unnecessary".
- The 5 patch series "list private v2 & luo flb" from Pasha Tatashin
adds some infrastructure improvements to the live update orchestrator.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaY4giAAKCRDdBJ7gKXxA
jgusAQDnKkP8UWTqXPC1jI+OrDJGU5ciAx8lzLeBVqMKzoYk9AD/TlhT2Nlx+Ef6
0HCUHUD0FMvAw/7/Dfc6ZKxwBEIxyww=
=mmsH
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
disk space by teaching ocfs2 to reclaim suballocator block group
space (Heming Zhao)
- "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
ARRAY_END() macro and uses it in various places (Alejandro Colomar)
- "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
page size (Pnina Feder)
- "kallsyms: Prevent invalid access when showing module buildid" cleans
up kallsyms code related to module buildid and fixes an invalid
access crash when printing backtraces (Petr Mladek)
- "Address page fault in ima_restore_measurement_list()" fixes a
kexec-related crash that can occur when booting the second-stage
kernel on x86 (Harshit Mogalapalli)
- "kho: ABI headers and Documentation updates" updates the kexec
handover ABI documentation (Mike Rapoport)
- "Align atomic storage" adds the __aligned attribute to atomic_t and
atomic64_t definitions to get natural alignment of both types on
csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)
- "kho: clean up page initialization logic" simplifies the page
initialization logic in kho_restore_page() (Pratyush Yadav)
- "Unload linux/kernel.h" moves several things out of kernel.h and into
more appropriate places (Yury Norov)
- "don't abuse task_struct.group_leader" removes the usage of
->group_leader when it is "obviously unnecessary" (Oleg Nesterov)
- "list private v2 & luo flb" adds some infrastructure improvements to
the live update orchestrator (Pasha Tatashin)
* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
kho: fix doc for kho_restore_pages()
tests/liveupdate: add in-kernel liveupdate test
liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
liveupdate: luo_file: Use private list
list: add kunit test for private list primitives
list: add primitives for private list manipulations
delayacct: fix uapi timespec64 definition
panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
netclassid: use thread_group_leader(p) in update_classid_task()
RDMA/umem: don't abuse current->group_leader
drm/pan*: don't abuse current->group_leader
drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
drm/amdgpu: don't abuse current->group_leader
android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
android/binder: don't abuse current->group_leader
kho: skip memoryless NUMA nodes when reserving scratch areas
...
core:
- drop kgdb support
- replace system workqueue with percpu
- account for property blobs in memcg
- MAINTAINERS updates for xe + buddy
rust:
- Fix documentation for Registration constructors.
- Use pin_init::zeroed() for fops initialization.
- Annotate DRM helpers with __rust_helper.
- Improve safety documentation for gem::Object::new().
- Update AlwaysRefCounted imports.
- mm: Prevent integer overflow in page_align().
atomic:
- add drm_device pointer to drm_private_obj
- introduce gamma/degamma LUT size check
buddy:
- fix free_trees memory leak
- prevent BUG_ON
bridge:
- introduce drm_bridge_unplug/enter/exit
- add connector argument to .hpd_notify
- lots of recounting conversions
- convert rockchip inno hdmi to bridge
- lontium-lt9611uxc: switch to HDMI audio helpers
- dw-hdmi-qp: add support for HPD-less setups
- Algoltek AG6311 support
panels:
- edp: CSW MNE007QB3-1, AUO B140HAN06.4, AUO B140QAX01.H
- st75751: add SPI support
- Sitronix ST7920, Samsung LTL106HL02
- LG LH546WF1-ED01, HannStar HSD156J
- BOE NV130WUM-T08
- Innolux G150XGE-L05
- Anbernic RG-DS
dma-buf:
- improve sg_table debugging
- add tracepoints
- call clear_page instead of memset
- start to introduce cgroup memory accounting in heaps
- remove sysfs stats
dma-fence:
- add new helpers
dp:
- mst: avoid oob access with vcpi=0
hdmi:
- limit infoframes exposure to userspace
gem:
- reduce page table overhead with THP
- fix leak in drm_gem_get_unmapped_area
gpuvm:
- API sanitation for rust bindings
sched:
- introduce new helpers
panic:
- report invalid panic modes
- add kunit tests
i915/xe display:
- Expose sharpness only if num_scalers is >= 2
- Add initial Xe3P_LPD for NVL
- BMG FBC support
- Add MTL+ platforms to support dpll framework
_ fix DIMM_S DRM decoding on ICL
- Return to using AUX interrupts
- PSR/Panel replay refactoring
- use consolidation HDMI tables
- Xe3_LPD CD2X dividier changes
xe:
- vfio: add vfio_pci for intel GPU
- multi queue support
- dynamic pagemaps and multi-device SVM
- expose temp attribs in hwmon
- NO_COMPRESSION bo flag
- expose MERT OA unit
- sysfs survivability refactor
- SRIOV PF: add MERT support
- enable SR-IOV VF migration
- Enable I2C/NVM on Crescent Island
- Xe3p page reclaimation support
- introduce SRIOV scheduler groups
- add SoC remappt support in system controller
- insert compiler barriers in GuC code
- define NVL GuC firmware
- handle GT resume failure
- fix drm scheduler layering violations
- enable GSC loading and PXP for PTL
- disable GuC Power DCC strategy on PTL
- unregister drm device on probe error
i915:
- move to kernel standard fault injection
- bump recommended GuC version for DG2 and MTL
amdgpu:
- SMUIO 15.x, PSP 15.x support
- IH 6.1.1/7.1 support
- MMHUB 3.4/4.2 support
- GC 11.5.4/12.1 support
- SDMA 6.1.4/7.1/7.11.4 support
- JPEG 5.3 support
- UserQ updates
- GC 9 gfx queue reset support
- TTM memory ops parallelization
- convert legacy logging to new helpers
- DC analog fixes
amdkfd:
- GC 11.5.4/12.1 suppport
- SDMA 6.1.4/7.1 support
- per context support
- increase kfd process hash table
- Reserved SDMA rework
radeon:
- convert legacy logging to new helpers
- use devm for i2c adapters
msm:
- GPU
- Document a612/RGMU dt bindings
- UBWC 6.0 support (for A840 / Kaanapali)
- a225 support
- DPU:
- Switched to use virtual planes by default
- Fixed DSI CMD panels on DPU 3.x
- Rewrote format handling to remove intermediate representation
- Fixed watchdog on DPU 8.x+
- Fixed TE / Vsync source setting on DPU 8.x+
- Added 3D_Mux on SC7280
- Kaanapali platform support
- Fixed UBWC register programming
- Made RM reserve DSPP-enabled mixers for CRTCs with LMs.
- Gamma correction support
- DP:
- Enabled support for eDP 1.4+ link rate tables
- Fixed MDSS1 DP indices on SA8775P, making them to work
- Fixed msm_dp_ctrl_config_msa() to work with LLVM 20
- DSI:
- Documented QCS8300 as compatible with SA8775P
- Kaanapali platform support
- DSI PHY:
- switched to divider_determine_rate()
- MDP5:
- Dropped support for MSM8998, SDM660 and SDM630 (switched over
to DPU)
- MDSS:
- Kaanapali platform support
- Fixed UBWC register programming
nova-core:
- Prepare for Turing support. This includes parsing and handling
Turing-specific firmware headers and sections as well as a Turing
Falcon HAL implementation.
- Get rid of the Result<impl PinInit<T, E>> anti-pattern.
- Relocate initializer-specific code into the appropriate initializer.
- Use CStr::from_bytes_until_nul() to remove custom helpers.
- Improve handling of unexpected firmware values.
- Clean up redundant debug prints.
- Replace c_str!() with native Rust C-string literals.
- Update nova-core task list.
nova:
- Align GEM object size to system page size.
tyr:
- Use generated uAPI bindings for GpuInfo.
- Replace manual sleeps with read_poll_timeout().
- Replace c_str!() with native Rust C-string literals.
- Suppress warnings for unread fields.
- Fix incorrect register name in print statement.
nouveau:
- fix big page table support races in PTE management
- improve reclocking on tegra 186+
amdxdna:
- fix suspend race conditions
- improve handling of zero tail pointers
- fix cu_idx overwritten during command setup
- enable hardware context priority
- remove NPU2 support
- update message buffer allocation requirements
- update firmware version check
ast:
- support imported cursor buffers
- big endian fixes
etnaviv:
- add PPU flop reset support
imagination:
- add AM62P support
- introduce hw version checks
ivpu:
- implement warm boot flow
panfrost:
- add bo sync ioctl
- add GPU_PM_RT support for RZ/G3E SoC
panthor:
- add bo sync ioctl
- enable timestamp propagation
- scheduler robustness improvements
- VM termination fixes
- huge page support
rockchip:
- RK3368 HDMI Support
- get rid of atomic_check fixups
- RK3506 support
- RK3576/RK3588 improved HPD handling
rz-du:
- RZ/V2H(P) MIPI-DSI Support
v3d:
- fix DMA segment size
- convert to new logging helpers
mediatek:
- move DP training to hotplug thread
- convert logging to new helpers
- add support for HS speed DSI
- Genio 510/700/1200-EVK, Radxa NIO-12L HDMI support
atmel-hlcdc:
- switch to drmm resource
- support nomodeset
- use newer helpers
hisilicon:
- fix various DP bugs
renesas:
- fix kernel panic on reboot
exynos:
- fix vidi_connection_ioctl using wrong device
- fix vidi_connection deref user ptr
- fix concurrency regression with vidi_context
vkms:
- add configfs support for display configuration
-----BEGIN PGP SIGNATURE-----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=RFJ2
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2026-02-11' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"Highlights:
- amdgpu support for lots of new IP blocks which means newer GPUs
- xe has a lot of SR-IOV and SVM improvements
- lots of intel display refactoring across i915/xe
- msm has more support for gen8 platforms
- Given up on kgdb/kms integration, it's too hard on modern hw
core:
- drop kgdb support
- replace system workqueue with percpu
- account for property blobs in memcg
- MAINTAINERS updates for xe + buddy
rust:
- Fix documentation for Registration constructors
- Use pin_init::zeroed() for fops initialization
- Annotate DRM helpers with __rust_helper
- Improve safety documentation for gem::Object::new()
- Update AlwaysRefCounted imports
- mm: Prevent integer overflow in page_align()
atomic:
- add drm_device pointer to drm_private_obj
- introduce gamma/degamma LUT size check
buddy:
- fix free_trees memory leak
- prevent BUG_ON
bridge:
- introduce drm_bridge_unplug/enter/exit
- add connector argument to .hpd_notify
- lots of recounting conversions
- convert rockchip inno hdmi to bridge
- lontium-lt9611uxc: switch to HDMI audio helpers
- dw-hdmi-qp: add support for HPD-less setups
- Algoltek AG6311 support
panels:
- edp: CSW MNE007QB3-1, AUO B140HAN06.4, AUO B140QAX01.H
- st75751: add SPI support
- Sitronix ST7920, Samsung LTL106HL02
- LG LH546WF1-ED01, HannStar HSD156J
- BOE NV130WUM-T08
- Innolux G150XGE-L05
- Anbernic RG-DS
dma-buf:
- improve sg_table debugging
- add tracepoints
- call clear_page instead of memset
- start to introduce cgroup memory accounting in heaps
- remove sysfs stats
dma-fence:
- add new helpers
dp:
- mst: avoid oob access with vcpi=0
hdmi:
- limit infoframes exposure to userspace
gem:
- reduce page table overhead with THP
- fix leak in drm_gem_get_unmapped_area
gpuvm:
- API sanitation for rust bindings
sched:
- introduce new helpers
panic:
- report invalid panic modes
- add kunit tests
i915/xe display:
- Expose sharpness only if num_scalers is >= 2
- Add initial Xe3P_LPD for NVL
- BMG FBC support
- Add MTL+ platforms to support dpll framework
_ fix DIMM_S DRM decoding on ICL
- Return to using AUX interrupts
- PSR/Panel replay refactoring
- use consolidation HDMI tables
- Xe3_LPD CD2X dividier changes
xe:
- vfio: add vfio_pci for intel GPU
- multi queue support
- dynamic pagemaps and multi-device SVM
- expose temp attribs in hwmon
- NO_COMPRESSION bo flag
- expose MERT OA unit
- sysfs survivability refactor
- SRIOV PF: add MERT support
- enable SR-IOV VF migration
- Enable I2C/NVM on Crescent Island
- Xe3p page reclaimation support
- introduce SRIOV scheduler groups
- add SoC remappt support in system controller
- insert compiler barriers in GuC code
- define NVL GuC firmware
- handle GT resume failure
- fix drm scheduler layering violations
- enable GSC loading and PXP for PTL
- disable GuC Power DCC strategy on PTL
- unregister drm device on probe error
i915:
- move to kernel standard fault injection
- bump recommended GuC version for DG2 and MTL
amdgpu:
- SMUIO 15.x, PSP 15.x support
- IH 6.1.1/7.1 support
- MMHUB 3.4/4.2 support
- GC 11.5.4/12.1 support
- SDMA 6.1.4/7.1/7.11.4 support
- JPEG 5.3 support
- UserQ updates
- GC 9 gfx queue reset support
- TTM memory ops parallelization
- convert legacy logging to new helpers
- DC analog fixes
amdkfd:
- GC 11.5.4/12.1 suppport
- SDMA 6.1.4/7.1 support
- per context support
- increase kfd process hash table
- Reserved SDMA rework
radeon:
- convert legacy logging to new helpers
- use devm for i2c adapters
msm:
- GPU
- Document a612/RGMU dt bindings
- UBWC 6.0 support (for A840 / Kaanapali)
- a225 support
- DPU:
- Switch to use virtual planes by default
- Fix DSI CMD panels on DPU 3.x
- Rewrite format handling to remove intermediate representation
- Fix watchdog on DPU 8.x+
- Fix TE / Vsync source setting on DPU 8.x+
- Add 3D_Mux on SC7280
- Kaanapali platform support
- Fix UBWC register programming
- Make RM reserve DSPP-enabled mixers for CRTCs with LMs
- Gamma correction support
- DP:
- Enable support for eDP 1.4+ link rate tables
- Fix MDSS1 DP indices on SA8775P, making them to work
- Fix msm_dp_ctrl_config_msa() to work with LLVM 20
- DSI:
- Document QCS8300 as compatible with SA8775P
- Kaanapali platform support
- DSI PHY:
- switch to divider_determine_rate()
- MDP5:
- Drop support for MSM8998, SDM660 and SDM630 (switch over to DPU)
- MDSS:
- Kaanapali platform support
- Fixed UBWC register programming
nova-core:
- Prepare for Turing support. This includes parsing and handling
Turing-specific firmware headers and sections as well as a Turing
Falcon HAL implementation
- Get rid of the Result<impl PinInit<T, E>> anti-pattern
- Relocate initializer-specific code into the appropriate initializer
- Use CStr::from_bytes_until_nul() to remove custom helpers
- Improve handling of unexpected firmware values
- Clean up redundant debug prints
- Replace c_str!() with native Rust C-string literals
- Update nova-core task list
nova:
- Align GEM object size to system page size
tyr:
- Use generated uAPI bindings for GpuInfo
- Replace manual sleeps with read_poll_timeout()
- Replace c_str!() with native Rust C-string literals
- Suppress warnings for unread fields
- Fix incorrect register name in print statement
nouveau:
- fix big page table support races in PTE management
- improve reclocking on tegra 186+
amdxdna:
- fix suspend race conditions
- improve handling of zero tail pointers
- fix cu_idx overwritten during command setup
- enable hardware context priority
- remove NPU2 support
- update message buffer allocation requirements
- update firmware version check
ast:
- support imported cursor buffers
- big endian fixes
etnaviv:
- add PPU flop reset support
imagination:
- add AM62P support
- introduce hw version checks
ivpu:
- implement warm boot flow
panfrost:
- add bo sync ioctl
- add GPU_PM_RT support for RZ/G3E SoC
panthor:
- add bo sync ioctl
- enable timestamp propagation
- scheduler robustness improvements
- VM termination fixes
- huge page support
rockchip:
- RK3368 HDMI Support
- get rid of atomic_check fixups
- RK3506 support
- RK3576/RK3588 improved HPD handling
rz-du:
- RZ/V2H(P) MIPI-DSI Support
v3d:
- fix DMA segment size
- convert to new logging helpers
mediatek:
- move DP training to hotplug thread
- convert logging to new helpers
- add support for HS speed DSI
- Genio 510/700/1200-EVK, Radxa NIO-12L HDMI support
atmel-hlcdc:
- switch to drmm resource
- support nomodeset
- use newer helpers
hisilicon:
- fix various DP bugs
renesas:
- fix kernel panic on reboot
exynos:
- fix vidi_connection_ioctl using wrong device
- fix vidi_connection deref user ptr
- fix concurrency regression with vidi_context
vkms:
- add configfs support for display configuration
* tag 'drm-next-2026-02-11' of https://gitlab.freedesktop.org/drm/kernel: (1610 commits)
drm/xe/pm: Disable D3Cold for BMG only on specific platforms
drm/xe: Fix kerneldoc for xe_tlb_inval_job_alloc_dep
drm/xe: Fix kerneldoc for xe_gt_tlb_inval_init_early
drm/xe: Fix kerneldoc for xe_migrate_exec_queue
drm/xe/query: Fix topology query pointer advance
drm/xe/guc: Fix kernel-doc warning in GuC scheduler ABI header
drm/xe/guc: Fix CFI violation in debugfs access.
accel/amdxdna: Move RPM resume into job run function
accel/amdxdna: Fix incorrect DPM level after suspend/resume
nouveau/vmm: start tracking if the LPT PTE is valid. (v6)
nouveau/vmm: increase size of vmm pte tracker struct to u32 (v2)
nouveau/vmm: rewrite pte tracker using a struct and bitfields.
accel/amdxdna: Fix incorrect error code returned for failed chain command
accel/amdxdna: Remove hardware context status
drm/bridge: imx8qxp-pixel-combiner: Fix bailout for imx8qxp_pc_bridge_probe()
drm/panel: ilitek-ili9882t: Remove duplicate initializers in tianma_il79900a_dsc
drm/i915/display: fix the pixel normalization handling for xe3p_lpd
drm/exynos: vidi: use ctx->lock to protect struct vidi_context member variables related to memory alloc/free
drm/exynos: vidi: fix to avoid directly dereferencing user pointer
drm/exynos: vidi: use priv->vidi_dev for ctx lookup in vidi_connection_ioctl()
...
-----BEGIN PGP SIGNATURE-----
iJEEABYKADkWIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCaYmAPhsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMSwyLDIACgkQgFxhu0/YY75PKAEAgNaon3unLoRnCGPjkRxL
kruzd/KHcodevfz0koL7hOUA/iHOEpGIibCHJpmj2xt/kgLCxxMCQVupalDfeKwq
4jYN
=Vy9z
-----END PGP SIGNATURE-----
Merge tag 'for-linus-7.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- fix running as Xen PVH guest in 32-bit mode without PAE
- fix PV device handling for suspend/resume when running as
a Xen guest
- clean up workqueue usage
- fix the Xen balloon driver for PVH dom0
- introduce the possibility to use hypercalls for console
messages in unprivileged guests
- enable Xen dom0 use of virtio devices in nested virtualization
setups
- simplify the xen-mcelog driver
* tag 'for-linus-7.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xenbus: Rename helpers to freeze/thaw/restore
xenbus: Use .freeze/.thaw to handle xenbus devices
xen/mcelog: simplify MCE_GETCLEAR_FLAGS using xchg()
xen/balloon: improve accuracy of initial balloon target for dom0
Partial revert "x86/xen: fix balloon target initialization for PVH dom0"
xen: introduce xen_console_io option
xen/virtio: Don't use grant-dma-ops when running as Dom0
x86/xen/pvh: Enable PAE mode for 32-bit guest only when CONFIG_X86_PAE is set
xen: privcmd: WQ_PERCPU added to alloc_workqueue users
xen/events: replace use of system_wq with system_percpu_wq
Use the linux/platform_data/pic32.h include instead of
asm/mach-pic32/pic32.h so that the asm variant can be dropped. This
is in preparation for allowing some drivers to be compiled on other
architectures with COMPILE_TEST enabled.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAml2lQweHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG0dcH/2yLU3IKlHSSgEDL
Qq3oBuRK/zoVOdy+CM+TmTdl2d1LnBd8J547xFStB7kVGf5mEkdFZdHLBSHRnKDf
ia1SGec06kyLpRX6x5T6FsfwOhkBmVsp59X0coM57QWxxenybugtzPvDO2TQ8/G4
buixJI0jJVgwRwXNzWB4n2W6FxNGui2A7gEN2mjtvkM2t/aDkiDjEqB8ve0pZJX9
4EWhxOgRFzwWgkd/bY+4wgXVXEt3GtI+3VvNncRqLIO00A/AnZOYmH4S2RQUDszD
IbyDscYYxloZcZMDXc3PN2WgD9DCGKuP3GpJGsOHbl0DN6JkqI9nwGsOFZKGVOeF
vbajwPE=
=iAOa
-----END PGP SIGNATURE-----
BackMerge tag 'v6.19-rc7' into drm-next
Linux 6.19-rc7
This is needed for msm and rust trees.
Signed-off-by: Dave Airlie <airlied@redhat.com>
This reverts commit d000422a46.
It is reported by many to cause boot failures, so must be reverted.
Cc: Xin Zhao <jackzxcui1989@163.com>
Cc: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/d1942304-ee30-478d-90fb-279519f3ae81@samsung.com
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On the embedded platform, certain critical data, such as IMU data, is
transmitted through UART. The tty_flip_buffer_push() interface in the TTY
layer uses system_dfl_wq to handle the flipping of the TTY buffer.
Although the unbound workqueue can create new threads on demand and wake
up the kworker thread on an idle CPU, it may be preempted by real-time
tasks or other high-prio tasks.
flush_to_ldisc() needs to wake up the relevant data handle thread. When
executing __wake_up_common_lock(), it calls spin_lock_irqsave(), which
does not disable preemption but disables migration in RT-Linux. This
prevents the kworker thread from being migrated to other cores by CPU's
balancing logic, resulting in long delays. The call trace is as follows:
__wake_up_common_lock
__wake_up
ep_poll_callback
__wake_up_common
__wake_up_common_lock
__wake_up
n_tty_receive_buf_common
n_tty_receive_buf2
tty_ldisc_receive_buf
tty_port_default_receive_buf
flush_to_ldisc
In our system, the processing interval for each frame of IMU data
transmitted via UART can experience significant jitter due to this issue.
Instead of the expected 10 to 15 ms frame processing interval, we see
spikes up to 30 to 35 ms. Moreover, in just one or two hours, there can
be 2 to 3 occurrences of such high jitter, which is quite frequent. This
jitter exceeds the software's tolerable limit of 20 ms.
Introduce flip_wq in tty_port which can be set by tty_port_link_wq() or as
default linked to default workqueue allocated when tty_register_driver().
The default workqueue is allocated with flag WQ_SYSFS, so that cpumask and
nice can be set dynamically. The execution timing of tty_port_link_wq() is
not clearly restricted. The newly added function tty_port_link_driver_wq()
checks whether the flip_wq of the tty_port has already been assigned when
linking the default tty_driver's workqueue to the port. After the user has
set a custom workqueue for a certain tty_port using tty_port_link_wq(), the
system will only use this custom workqueue, even if tty_driver does not
have %TTY_DRIVER_CUSTOM_WORKQUEUE flag.
Introduce %TTY_DRIVER_CUSTOM_WORKQUEUE flag meaning not to create the
default single tty_driver workqueue. Two reasons why need to introduce the
%TTY_DRIVER_CUSTOM_WORKQUEUE flag:
1. If the WQ_SYSFS parameter is enabled, workqueue_sysfs_register() will
fail when trying to create a workqueue with the same name. The pty is an
example of this; if both CONFIG_LEGACY_PTYS and CONFIG_UNIX98_PTYS are
enabled, the call to tty_register_driver() in unix98_pty_init() will fail.
2. Different tty ports may be used for different tasks, which may require
separate core binding control via workqueues. In this case, the workqueue
created by default in the tty driver is unnecessary. Enabling this flag
prevents the creation of this redundant workqueue.
After applying this patch, we can set the related UART TTY flip buffer
workqueue by sysfs. We set the cpumask to CPU cores associated with the
IMU tasks, and set the nice to -20. Testing has shown significant
improvement in the previously described issue, with almost no stuttering
occurring anymore.
Signed-off-by: Xin Zhao <jackzxcui1989@163.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://patch.msgid.link/20251223034836.2625547-1-jackzxcui1989@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As comments mentioned this is old (and actually deprecated) interface
to set custom baud rates. This interface has limitations as it only
allows to set a single opaque value called "custom_divisor". If the HW
needs more complex settings (like fractional divisor) it must somehow
encode this. This is horrid interface that is very driver specific
and not flexible. Meanwhile Linux has established way to set free
baud rate settings via BOTHER [1]. With all this being said, remove
deprecated interface for good.
Link: https://stackoverflow.com/questions/12646324/how-can-i-set-a-custom-baud-rate-on-linux [1]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260122102349.2395423-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As comments mentioned this is old (and actually deprecated) interface
to set custom baud rates. This interface has limitations as it only
allows to set a single opaque value called "custom_divisor". If the HW
needs more complex settings (like fractional divisor) it must somehow
encode this. This is horrid interface that is very driver specific
and not flexible. Meanwhile Linux has established way to set free
baud rate settings via BOTHER [1]. With all this being said, remove
deprecated interface for good.
Link: https://stackoverflow.com/questions/12646324/how-can-i-set-a-custom-baud-rate-on-linux [1]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260122102349.2395423-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In TI K3 SoCs, I/O daisy chaining is used to allow wakeup from UART when the
UART controller is off. Set UART device as wakeup capable using out-of-band
wakeup if the 'wakeup' pinctrl state exists and the device may wakeup.
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Kendall Willis <k-willis@ti.com>
Link: https://patch.msgid.link/20260116-uart-wakeup-v2-1-0078ae9996e4@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert commit bfc467db60 ("serial: remove redundant
tty_port_link_device()") because the tty_port_link_device() is not
redundant: the tty->port has to be confured before we call
uart_configure_port(), otherwise user-space can open console without TTY
linked to the driver.
This tty_port_link_device() was added explicitly to avoid this exact
issue in commit fb2b90014d ("tty: link tty and port before configuring
it as console"), so offending commit basically reverted the fix saying
it is redundant without addressing the actual race condition presented
there.
Reproducible always as tty->port warning on Qualcomm SoC with most of
devices disabled, so with very fast boot, and one serial device being
the console:
printk: legacy console [ttyMSM0] enabled
printk: legacy console [ttyMSM0] enabled
printk: legacy bootconsole [qcom_geni0] disabled
printk: legacy bootconsole [qcom_geni0] disabled
------------[ cut here ]------------
tty_init_dev: ttyMSM driver does not set tty->port. This would crash the kernel. Fix the driver!
WARNING: drivers/tty/tty_io.c:1414 at tty_init_dev.part.0+0x228/0x25c, CPU#2: systemd/1
Modules linked in: socinfo tcsrcc_eliza gcc_eliza sm3_ce fuse ipv6
CPU: 2 UID: 0 PID: 1 Comm: systemd Tainted: G S 6.19.0-rc4-next-20260108-00024-g2202f4d30aa8 #73 PREEMPT
Tainted: [S]=CPU_OUT_OF_SPEC
Hardware name: Qualcomm Technologies, Inc. Eliza (DT)
...
tty_init_dev.part.0 (drivers/tty/tty_io.c:1414 (discriminator 11)) (P)
tty_open (arch/arm64/include/asm/atomic_ll_sc.h:95 (discriminator 3) drivers/tty/tty_io.c:2073 (discriminator 3) drivers/tty/tty_io.c:2120 (discriminator 3))
chrdev_open (fs/char_dev.c:411)
do_dentry_open (fs/open.c:962)
vfs_open (fs/open.c:1094)
do_open (fs/namei.c:4634)
path_openat (fs/namei.c:4793)
do_filp_open (fs/namei.c:4820)
do_sys_openat2 (fs/open.c:1391 (discriminator 3))
...
Starting Network Name Resolution...
Apparently the flow with this small Yocto-based ramdisk user-space is:
driver (qcom_geni_serial.c): user-space:
============================ ===========
qcom_geni_serial_probe()
uart_add_one_port()
serial_core_register_port()
serial_core_add_one_port()
uart_configure_port()
register_console()
|
| open console
| ...
| tty_init_dev()
| driver->ports[idx] is NULL
|
tty_port_register_device_attr_serdev()
tty_port_link_device() <- set driver->ports[idx]
Fixes: bfc467db60 ("serial: remove redundant tty_port_link_device()")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://patch.msgid.link/20260123072139.53293-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove <linux/hex.h> from <linux/kernel.h> and update all users/callers of
hex.h interfaces to directly #include <linux/hex.h> as part of the process
of putting kernel.h on a diet.
Removing hex.h from kernel.h means that 36K C source files don't have to
pay the price of parsing hex.h for the roughly 120 C source files that
need it.
This change has been build-tested with allmodconfig on most ARCHes. Also,
all users/callers of <linux/hex.h> in the entire source tree have been
updated if needed (if not already #included).
Link: https://lkml.kernel.org/r/20251215005206.2362276-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The KMSG_COMPONENT macro is a leftover of the s390 specific "kernel message
catalog" from 2008 [1] which never made it upstream.
The macro was added to s390 code to allow for an out-of-tree patch which
used this to generate unique message ids. Also this out-of-tree doesn't
exist anymore.
Remove the macro in order to get rid of a pointless indirection.
[1] https://lwn.net/Articles/292650/
Acked-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://patch.msgid.link/20251126142909.2140015-1-hca@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fintek F81504/508/512 can support both RTS_ON_SEND and RTS_AFTER_SEND,
but pci_fintek_rs485_supported only announces the former.
This makes it impossible to unset SER_RS485_RTS_ON_SEND from
userspace because of uart_sanitize_serial_rs485(). Some devices
with these chips need RTS low on TX, so they are effectively broken.
Fix this by announcing the support for SER_RS485_RTS_AFTER_SEND,
similar to commit 068d35a7be ("serial: sc16is7xx: announce support
for SER_RS485_RTS_ON_SEND").
Fixes: 4afeced55b ("serial: core: fix sanitizing check for RTS settings")
Cc: stable <stable@kernel.org>
Signed-off-by: Marnix Rijnart <marnix.rijnart@iwell.eu>
Link: https://patch.msgid.link/20260112000931.61703-1-marnix.rijnart@iwell.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 10904d725f ("serial: qcom-geni: Enable PM runtime for serial
driver") caused BT init to fail during bootup on the RB2 platform,
preventing proper BT initialization. However, BT works correctly after
bootup completes.
The issue occurs when runtime PM is enabled and uart_add_one_port() is
called before wakeup IRQ setup. The uart_add_one_port() call activates
the device through runtime PM, which configures GPIOs to the "qup_x"
pinmux function during runtime resume. When wakeup IRQ registration
happens afterward using dev_pm_set_dedicated_wake_irq(), these GPIOs
are reset back to the "gpio" pinmux function, which impacts the RX GPIO
and leads to Bluetooth failures.
Fix this by ensuring wakeup IRQ setup is completed before calling
uart_add_one_port() to prevent the pinmux function conflict.
Fixes: 10904d725f ("serial: qcom-geni: Enable PM runtime for serial driver")
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Closes: https://lore.kernel.org/all/20251110101043.2108414-4-praveen.talari@oss.qualcomm.com/
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Link: https://patch.msgid.link/20260108041006.1874757-1-praveen.talari@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clear rx_running flag only after DMA teardown polling completes. In the
previous implementation the flag was being cleared while hardware teardown
was still in progress, creating a mismatch between software state
(flag = 0, "ready") and hardware state (still terminating).
Signed-off-by: Moteen Shah <m-shah@ti.com>
Link: https://patch.msgid.link/20260112081829.63049-3-m-shah@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The DMA IRQ handler does not accounts for the overrun(OE) or any other
errors being reported by the IP before triggering a DMA transaction which
leads to the interrupts not being handled resulting into an IRQ storm.
The way to handle OE is to:
1. Reset the RX FIFO.
2. Read the UART_RESUME register, which clears the internal flag
Earlier, the driver issued DMA transations even in case of OE which shouldn't
be done according to the OE handling mechanism mentioned above, as we are
resetting the FIFO's, refer section: "12.1.6.4.8.1.3.6 Overrun During
Receive" [0].
[0] https://www.ti.com/lit/pdf/spruiu1
Signed-off-by: Moteen Shah <m-shah@ti.com>
Link: https://patch.msgid.link/20260112081829.63049-2-m-shah@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having a prompt of "DMA support" suddenly appear during a
"make oldconfig" can be confusing. Add a little helpful text to
the prompt message.
Fixes: 73a19e4c03 ("serial: sh-sci: Add DMA support.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260110232643.3533351-5-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Improve the "Non-8250 serial port support" menu so that entries in it
are displayed in a better order (_CONSOLE after its driver) and so that
intervening symbols don't break up the dependency list, allowing menu
entries to be displayed with proper indentation.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260110232643.3533351-4-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Improve the "8250/16550 serial support" menu so that entries in it
are displayed in a better order (reorder a few symbols) and so that
intervening symbols don't break up the dependency list, allowing menu
entries to be displayed with proper indentation.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260110232643.3533351-3-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SERIAL_IMX_CONSOLE is a build option for the imx driver (SERIAL_IMX).
It does not build a separate console driver file, so it can't be built
as a module since it isn't built at all.
Change the Kconfig symbol from tristate to bool and update the help
text accordingly.
Fixes: 0db4f9b91c ("tty: serial: imx: enable imx serial console port as module")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260110232643.3533351-2-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 1f4ea4838b ("mcb: Add missing modpost build support")
the MODULE_ALIAS() is redundant as the module alias is now
automatically generated from the MODULE_DEVICE_TABLE().
Remove the explicit alias.
No functional change intended.
Reviewed-by: Jorge Sanjuan Garcia <dev-jorge.sanjuangarcia@duagon.com>
Signed-off-by: Jose Javier Rodriguez Barbarin <dev-josejavier.rodriguez@duagon.com>
Link: https://patch.msgid.link/20260108134110.25278-3-dev-josejavier.rodriguez@duagon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 1f4ea4838b ("mcb: Add missing modpost build support")
the MODULE_ALIAS() is redundant as the module alias is now
automatically generated from the MODULE_DEVICE_TABLE().
Remove the explicit alias.
No functional change intended.
Reviewed-by: Jorge Sanjuan Garcia <dev-jorge.sanjuangarcia@duagon.com>
Signed-off-by: Jose Javier Rodriguez Barbarin <dev-josejavier.rodriguez@duagon.com>
Link: https://patch.msgid.link/20260108134110.25278-2-dev-josejavier.rodriguez@duagon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xen can support console_io hypercalls for any domains, not just dom0,
depending on DEBUG and XSM policies. These hypercalls can be very useful
for development and debugging.
Introduce a kernel command line option xen_console_io to enable the
usage of console_io hypercalls for any domain upon request. When
xen_console_io is not specified, the current behavior is retained.
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <alpine.DEB.2.22.394.2601131522540.992863@ubuntu-linux-20-04-desktop>
RTS line control with delay should be triggered when there is no more
bytes in kfifo and hardware buffer is empty. Without this patch RTS
control is scheduled right after feeding hardware buffer and this is too
early.
RTS line may change state before hardware buffer is empty.
With this patch delayed RTS state change is triggered when function
cdns_uart_handle_tx is called from cdns_uart_isr on
CDNS_UART_IXR_TXEMPTY exactly when hardware completed transmission
Fixes: fccc9d9233 ("tty: serial: uartps: Add rs485 support to uartps driver")
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20251221103221.1971125-1-jakub.turek@elsta.tech
Signed-off-by: Jakub Turek <jakub.turek@elsta.tech>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver updates struct sci_port::tx_cookie to zero right before the TX
work is scheduled, or to -EINVAL when DMA is disabled.
dma_async_is_complete(), called through dma_cookie_status() (and possibly
through dmaengine_tx_status()), considers cookies valid only if they have
values greater than or equal to 1.
Passing zero or -EINVAL to dmaengine_tx_status() before any TX DMA
transfer has started leads to an incorrect TX status being reported, as the
cookie is invalid for the DMA subsystem. This may cause long wait times
when the serial device is opened for configuration before any TX activity
has occurred.
Check that the TX cookie is valid before passing it to
dmaengine_tx_status().
Fixes: 7cc0e0a43a ("serial: sh-sci: Check if TX data was written to device in .tx_empty()")
Cc: stable <stable@kernel.org>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20251217135759.402015-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During restoring sysfs fwnode information the information of_node_reused
was dropped. This was previously set by device_set_of_node_from_dev().
Add it back manually
Fixes: 24ec03cc55 ("serial: core: Restore sysfs fwnode information")
Cc: stable <stable@kernel.org>
Suggested-by: Cosmin Tanislav <demonsingur@gmail.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Michael Walle <mwalle@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Cosmin Tanislav <demonsingur@gmail.com>
Link: https://patch.msgid.link/20251219152813.1893982-1-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicolas Pitre
Ilpo Järvinen
Martin Roukala (né Peres)
Jiayuan Chen
Maciej Andrzejewski ICEYE
Peng Zhang
Raul E Rangel
Kees Cook
Linus Torvalds
Sebastian Andrzej Siewior
Brian Masney
Dave Airlie
Greg Kroah-Hartman
Xin Zhao
Andy Shevchenko
Kendall Willis
Krzysztof Kozlowski
Randy Dunlap
Heiko Carstens
Marnix Rijnart
Praveen Talari
Moteen Shah
Jose Javier Rodriguez Barbarin
Stefano Stabellini
j.turek
Claudiu Beznea
Alexander Stein
Geert Uytterhoeven