The BPF interpreter's signed 32-bit division and modulo handlers use
the kernel abs() macro on s32 operands. The abs() macro documentation
(include/linux/math.h) explicitly states the result is undefined when
the input is the type minimum. When DST contains S32_MIN (0x80000000),
abs((s32)DST) triggers undefined behavior and returns S32_MIN unchanged
on arm64/x86. This value is then sign-extended to u64 as
0xFFFFFFFF80000000, causing do_div() to compute the wrong result.
The verifier's abstract interpretation (scalar32_min_max_sdiv) computes
the mathematically correct result for range tracking, creating a
verifier/interpreter mismatch that can be exploited for out-of-bounds
map value access.
Introduce abs_s32() which handles S32_MIN correctly by casting to u32
before negating, avoiding signed overflow entirely. Replace all 8
abs((s32)...) call sites in the interpreter's sdiv32/smod32 handlers.
s32 is the only affected case -- the s64 division/modulo handlers do
not use abs().
Fixes: ec0e2da95f ("bpf: Support new signed div/mod instructions.")
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Jenny Guanni Qu <qguanni@gmail.com>
Link: https://lore.kernel.org/r/20260311011116.2108005-2-qguanni@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF_ST | BPF_PROBE_MEM32 immediate stores are not handled by
bpf_jit_blind_insn(), allowing user-controlled 32-bit immediates to
survive unblinded into JIT-compiled native code when bpf_jit_harden >= 1.
The root cause is that convert_ctx_accesses() rewrites BPF_ST|BPF_MEM
to BPF_ST|BPF_PROBE_MEM32 for arena pointer stores during verification,
before bpf_jit_blind_constants() runs during JIT compilation. The
blinding switch only matches BPF_ST|BPF_MEM (mode 0x60), not
BPF_ST|BPF_PROBE_MEM32 (mode 0xa0). The instruction falls through
unblinded.
Add BPF_ST|BPF_PROBE_MEM32 cases to bpf_jit_blind_insn() alongside the
existing BPF_ST|BPF_MEM cases. The blinding transformation is identical:
load the blinded immediate into BPF_REG_AX via mov+xor, then convert
the immediate store to a register store (BPF_STX).
The rewritten STX instruction must preserve the BPF_PROBE_MEM32 mode so
the architecture JIT emits the correct arena addressing (R12-based on
x86-64). Cannot use the BPF_STX_MEM() macro here because it hardcodes
BPF_MEM mode; construct the instruction directly instead.
Fixes: 6082b6c328 ("bpf: Recognize addr_space_cast instruction in the verifier.")
Reviewed-by: Puranjay Mohan <puranjay@kernel.org>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Sachin Kumar <xcyfun@protonmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/Y6IT5VvNRchPBLI5D7JZHBzZrU9rb0ycRJPJzJSXGj7kJlX8RJwZFSM2YZjcDxoQKABkxt1T8Os2gi23PYyFuQe6KkZGWVyfz8K5afdy9ak=@protonmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Total patches: 107
Reviews/patch: 1.07
Reviewed rate: 67%
- The 2 patch series "ocfs2: give ocfs2 the ability to reclaim
suballocator free bg" from Heming Zhao saves disk space by teaching
ocfs2 to reclaim suballocator block group space.
- The 4 patch series "Add ARRAY_END(), and use it to fix off-by-one
bugs" from Alejandro Colomar adds the ARRAY_END() macro and uses it in
various places.
- The 2 patch series "vmcoreinfo: support VMCOREINFO_BYTES larger than
PAGE_SIZE" from Pnina Feder makes the vmcore code future-safe, if
VMCOREINFO_BYTES ever exceeds the page size.
- The 7 patch series "kallsyms: Prevent invalid access when showing
module buildid" from Petr Mladek cleans up kallsyms code related to
module buildid and fixes an invalid access crash when printing
backtraces.
- The 3 patch series "Address page fault in
ima_restore_measurement_list()" from Harshit Mogalapalli fixes a
kexec-related crash that can occur when booting the second-stage kernel
on x86.
- The 6 patch series "kho: ABI headers and Documentation updates" from
Mike Rapoport updates the kexec handover ABI documentation.
- The 4 patch series "Align atomic storage" from Finn Thain adds the
__aligned attribute to atomic_t and atomic64_t definitions to get
natural alignment of both types on csky, m68k, microblaze, nios2,
openrisc and sh.
- The 2 patch series "kho: clean up page initialization logic" from
Pratyush Yadav simplifies the page initialization logic in
kho_restore_page().
- The 6 patch series "Unload linux/kernel.h" from Yury Norov moves
several things out of kernel.h and into more appropriate places.
- The 7 patch series "don't abuse task_struct.group_leader" from Oleg
Nesterov removes the usage of ->group_leader when it is "obviously
unnecessary".
- The 5 patch series "list private v2 & luo flb" from Pasha Tatashin
adds some infrastructure improvements to the live update orchestrator.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaY4giAAKCRDdBJ7gKXxA
jgusAQDnKkP8UWTqXPC1jI+OrDJGU5ciAx8lzLeBVqMKzoYk9AD/TlhT2Nlx+Ef6
0HCUHUD0FMvAw/7/Dfc6ZKxwBEIxyww=
=mmsH
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
disk space by teaching ocfs2 to reclaim suballocator block group
space (Heming Zhao)
- "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
ARRAY_END() macro and uses it in various places (Alejandro Colomar)
- "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
page size (Pnina Feder)
- "kallsyms: Prevent invalid access when showing module buildid" cleans
up kallsyms code related to module buildid and fixes an invalid
access crash when printing backtraces (Petr Mladek)
- "Address page fault in ima_restore_measurement_list()" fixes a
kexec-related crash that can occur when booting the second-stage
kernel on x86 (Harshit Mogalapalli)
- "kho: ABI headers and Documentation updates" updates the kexec
handover ABI documentation (Mike Rapoport)
- "Align atomic storage" adds the __aligned attribute to atomic_t and
atomic64_t definitions to get natural alignment of both types on
csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)
- "kho: clean up page initialization logic" simplifies the page
initialization logic in kho_restore_page() (Pratyush Yadav)
- "Unload linux/kernel.h" moves several things out of kernel.h and into
more appropriate places (Yury Norov)
- "don't abuse task_struct.group_leader" removes the usage of
->group_leader when it is "obviously unnecessary" (Oleg Nesterov)
- "list private v2 & luo flb" adds some infrastructure improvements to
the live update orchestrator (Pasha Tatashin)
* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
kho: fix doc for kho_restore_pages()
tests/liveupdate: add in-kernel liveupdate test
liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
liveupdate: luo_file: Use private list
list: add kunit test for private list primitives
list: add primitives for private list manipulations
delayacct: fix uapi timespec64 definition
panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
netclassid: use thread_group_leader(p) in update_classid_task()
RDMA/umem: don't abuse current->group_leader
drm/pan*: don't abuse current->group_leader
drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
drm/amdgpu: don't abuse current->group_leader
android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
android/binder: don't abuse current->group_leader
kho: skip memoryless NUMA nodes when reserving scratch areas
...
The added fsession does not prevent running on those architectures, that
haven't added fsession support.
For example, try to run fsession tests on arm64:
test_fsession_basic:PASS:fsession_test__open_and_load 0 nsec
test_fsession_basic:PASS:fsession_attach 0 nsec
check_result:FAIL:test_run_opts err unexpected error: -14 (errno 14)
In order to prevent such errors, add bpf_jit_supports_fsession() to guard
those architectures.
Fixes: 2d419c4465 ("bpf: add fsession support")
Acked-by: Puranjay Mohan <puranjay@kernel.org>
Tested-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260131144950.16294-2-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allowing sleepable programs to use tail calls.
Making sure we can't mix sleepable and non-sleepable bpf programs
in tail call map (BPF_MAP_TYPE_PROG_ARRAY) and allowing it to be
used in sleepable programs.
Sleepable programs can be preempted and sleep which might bring
new source of race conditions, but both direct and indirect tail
calls should not be affected.
Direct tail calls work by patching direct jump to callee into bpf
caller program, so no problem there. We atomically switch from nop
to jump instruction.
Indirect tail call reads the callee from the map and then jumps to
it. The callee bpf program can't disappear (be released) from the
caller, because it is executed under rcu lock (rcu_read_lock_trace).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260130081208.1130204-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_address_lookup() has been used only in kallsyms_lookup_buildid(). It
was supposed to set @modname and @modbuildid when the symbol was in a
module.
But it always just cleared @modname because BPF symbols were never in a
module. And it did not clear @modbuildid because the pointer was not
passed.
The wrapper is no longer needed. Both @modname and @modbuildid are now
always initialized to NULL in kallsyms_lookup_buildid().
Remove the wrapper and rename __bpf_address_lookup() to
bpf_address_lookup() because this variant is used everywhere.
[akpm@linux-foundation.org: fix loongarch]
Link: https://lkml.kernel.org/r/20251128135920.217303-6-pmladek@suse.com
Fixes: 9294523e37 ("module: add printk formats to add module build ID to stacktraces")
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Aaron Tomlin <atomlin@atomlin.com>
Cc: Daniel Borkman <daniel@iogearbox.net>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Luis Chamberalin <mcgrof@kernel.org>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove <linux/hex.h> from <linux/kernel.h> and update all users/callers of
hex.h interfaces to directly #include <linux/hex.h> as part of the process
of putting kernel.h on a diet.
Removing hex.h from kernel.h means that 36K C source files don't have to
pay the price of parsing hex.h for the roughly 120 C source files that
need it.
This change has been build-tested with allmodconfig on most ARCHes. Also,
all users/callers of <linux/hex.h> in the entire source tree have been
updated if needed (if not already #included).
Link: https://lkml.kernel.org/r/20251215005206.2362276-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
BPF programs detect recursion using a per-CPU 'active' flag in struct
bpf_prog. The trampoline currently sets/clears this flag with atomic
operations.
On some arm64 platforms (e.g., Neoverse V2 with LSE), per-CPU atomic
operations are relatively slow. Unlike x86_64 - where per-CPU updates
can avoid cross-core atomicity, arm64 LSE atomics are always atomic
across all cores, which is unnecessary overhead for strictly per-CPU
state.
This patch removes atomics from the recursion detection path on arm64 by
changing 'active' to a per-CPU array of four u8 counters, one per
context: {NMI, hard-irq, soft-irq, normal}. The running context uses a
non-atomic increment/decrement on its element. After increment,
recursion is detected by reading the array as a u32 and verifying that
only the expected element changed; any change in another element
indicates inter-context recursion, and a value > 1 in the same element
indicates same-context recursion.
For example, starting from {0,0,0,0}, a normal-context trigger changes
the array to {0,0,0,1}. If an NMI arrives on the same CPU and triggers
the program, the array becomes {1,0,0,1}. When the NMI context checks
the u32 against the expected mask for normal (0x00000001), it observes
0x01000001 and correctly reports recursion. Same-context recursion is
detected analogously.
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20251219184422.2899902-3-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce a bpf_has_frame_pointer() helper that unwinders can call to
determine whether a given instruction pointer is within the valid frame
pointer region of a BPF JIT program or trampoline (i.e., after the
prologue, before the epilogue).
This will enable livepatch (with the ORC unwinder) to reliably unwind
through BPF JIT frames.
Acked-by: Song Liu <song@kernel.org>
Acked-and-tested-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/fd2bc5b4e261a680774b28f6100509fd5ebad2f0.1764818927.git.jpoimboe@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Add a new BPF command BPF_PROG_ASSOC_STRUCT_OPS to allow associating
a BPF program with a struct_ops map. This command takes a file
descriptor of a struct_ops map and a BPF program and set
prog->aux->st_ops_assoc to the kdata of the struct_ops map.
The command does not accept a struct_ops program nor a non-struct_ops
map. Programs of a struct_ops map is automatically associated with the
map during map update. If a program is shared between two struct_ops
maps, prog->aux->st_ops_assoc will be poisoned to indicate that the
associated struct_ops is ambiguous. The pointer, once poisoned, cannot
be reset since we have lost track of associated struct_ops. For other
program types, the associated struct_ops map, once set, cannot be
changed later. This restriction may be lifted in the future if there is
a use case.
A kernel helper bpf_prog_get_assoc_struct_ops() can be used to retrieve
the associated struct_ops pointer. The returned pointer, if not NULL, is
guaranteed to be valid and point to a fully updated struct_ops struct.
For struct_ops program reused in multiple struct_ops map, the return
will be NULL.
prog->aux->st_ops_assoc is protected by bumping the refcount for
non-struct_ops programs and RCU for struct_ops programs. Since it would
be inefficient to track programs associated with a struct_ops map, every
non-struct_ops program will bump the refcount of the map to make sure
st_ops_assoc stays valid. For a struct_ops program, it is protected by
RCU as map_free will wait for an RCU grace period before disassociating
the program with the map. The helper must be called in BPF program
context or RCU read-side critical section.
struct_ops implementers should note that the struct_ops returned may not
be initialized nor attached yet. The struct_ops implementer will be
responsible for tracking and checking the state of the associated
struct_ops map if the use case expects an initialized or attached
struct_ops.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/bpf/20251203233748.668365-3-ameryhung@gmail.com
In the origin logic, the bpf_arch_text_poke() assume that the old and new
instructions have the same opcode. However, they can have different opcode
if we want to replace a "call" insn with a "jmp" insn.
Therefore, add the new function parameter "old_t" along with the "new_t",
which are used to indicate the old and new poke type. Meanwhile, adjust
the implement of bpf_arch_text_poke() for all the archs.
"BPF_MOD_NOP" is added to make the code more readable. In
bpf_arch_text_poke(), we still check if the new and old address is NULL to
determine if nop insn should be used, which I think is more safe.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20251118123639.688444-6-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add support for a new instruction
BPF_JMP|BPF_X|BPF_JA, SRC=0, DST=Rx, off=0, imm=0
which does an indirect jump to a location stored in Rx. The register
Rx should have type PTR_TO_INSN. This new type assures that the Rx
register contains a value (or a range of values) loaded from a
correct jump table – map of type instruction array.
For example, for a C switch LLVM will generate the following code:
0: r3 = r1 # "switch (r3)"
1: if r3 > 0x13 goto +0x666 # check r3 boundaries
2: r3 <<= 0x3 # adjust to an index in array of addresses
3: r1 = 0xbeef ll # r1 is PTR_TO_MAP_VALUE, r1->map_ptr=M
5: r1 += r3 # r1 inherits boundaries from r3
6: r1 = *(u64 *)(r1 + 0x0) # r1 now has type INSN_TO_PTR
7: gotox r1 # jit will generate proper code
Here the gotox instruction corresponds to one particular map. This is
possible however to have a gotox instruction which can be loaded from
different maps, e.g.
0: r1 &= 0x1
1: r2 <<= 0x3
2: r3 = 0x0 ll # load from map M_1
4: r3 += r2
5: if r1 == 0x0 goto +0x4
6: r1 <<= 0x3
7: r3 = 0x0 ll # load from map M_2
9: r3 += r1
A: r1 = *(u64 *)(r3 + 0x0)
B: gotox r1 # jump to target loaded from M_1 or M_2
During check_cfg stage the verifier will collect all the maps which
point to inside the subprog being verified. When building the config,
the high 16 bytes of the insn_state are used, so this patch
(theoretically) supports jump tables of up to 2^16 slots.
During the later stage, in check_indirect_jump, it is checked that
the register Rx was loaded from a particular instruction array.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251105090410.1250500-9-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When bpf_jit_harden is enabled, all constants in the BPF code are
blinded to prevent JIT spraying attacks. This happens during JIT
phase. Adjust all the related instruction arrays accordingly.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251105090410.1250500-6-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Yinhao et al. recently reported:
Our fuzzer tool discovered an uninitialized pointer issue in the
bpf_prog_test_run_xdp() function within the Linux kernel's BPF subsystem.
This leads to a NULL pointer dereference when a BPF program attempts to
deference the txq member of struct xdp_buff object.
The test initializes two programs of BPF_PROG_TYPE_XDP: progA acts as the
entry point for bpf_prog_test_run_xdp() and its expected_attach_type can
neither be of be BPF_XDP_DEVMAP nor BPF_XDP_CPUMAP. progA calls into a slot
of a tailcall map it owns. progB's expected_attach_type must be BPF_XDP_DEVMAP
to pass xdp_is_valid_access() validation. The program returns struct xdp_md's
egress_ifindex, and the latter is only allowed to be accessed under mentioned
expected_attach_type. progB is then inserted into the tailcall which progA
calls.
The underlying issue goes beyond XDP though. Another example are programs
of type BPF_PROG_TYPE_CGROUP_SOCK_ADDR. sock_addr_is_valid_access() as well
as sock_addr_func_proto() have different logic depending on the programs'
expected_attach_type. Similarly, a program attached to BPF_CGROUP_INET4_GETPEERNAME
should not be allowed doing a tailcall into a program which calls bpf_bind()
out of BPF which is only enabled for BPF_CGROUP_INET4_CONNECT.
In short, specifying expected_attach_type allows to open up additional
functionality or restrictions beyond what the basic bpf_prog_type enables.
The use of tailcalls must not violate these constraints. Fix it by enforcing
expected_attach_type in __bpf_prog_map_compatible().
Note that we only enforce this for tailcall maps, but not for BPF devmaps or
cpumaps: There, the programs are invoked through dev_map_bpf_prog_run*() and
cpu_map_bpf_prog_run*() which set up a new environment / context and therefore
these situations are not prone to this issue.
Fixes: 5e43f899b0 ("bpf: Check attach type at prog load time")
Reported-by: Yinhao Hu <dddddd@hust.edu.cn>
Reported-by: Kaiyan Mei <M202472210@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20250926171201.188490-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Exclusive maps restrict map access to specific programs using a hash.
The current hash used for this is SHA1, which is prone to collisions.
This patch uses SHA256, which is more resilient against
collisions. This new hash is stored in bpf_prog and used by the verifier
to determine if a program can access a given exclusive map.
The original 64-bit tags are kept, as they are used by users as a short,
possibly colliding program identifier for non-security purposes.
Signed-off-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/r/20250914215141.15144-2-kpsingh@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF streams are only valid for the main programs, to make it easier to
access streams from subprogs, introduce main_prog_aux in struct
bpf_prog_aux.
prog->aux->main_prog_aux = prog->aux, for main programs and
prog->aux->main_prog_aux = main_prog->aux, for subprograms.
Make bpf_prog_find_from_stack() use the added main_prog_aux to return
the mainprog when a subprog is found on the stack.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250911145808.58042-3-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
OpenWRT users reported regression on ARMv6 devices after updating to latest
HEAD, where tcpdump filter:
tcpdump "not ether host 3c37121a2b3c and not ether host 184ecbca2a3a \
and not ether host 14130b4d3f47 and not ether host f0f61cf440b7 \
and not ether host a84b4dedf471 and not ether host d022be17e1d7 \
and not ether host 5c497967208b and not ether host 706655784d5b"
fails with warning: "Kernel filter failed: No error information"
when using config:
# CONFIG_BPF_JIT_ALWAYS_ON is not set
CONFIG_BPF_JIT_DEFAULT_ON=y
The issue arises because commits:
1. "bpf: Fix array bounds error with may_goto" changed default runtime to
__bpf_prog_ret0_warn when jit_requested = 1
2. "bpf: Avoid __bpf_prog_ret0_warn when jit fails" returns error when
jit_requested = 1 but jit fails
This change restores interpreter fallback capability for BPF programs with
stack size <= 512 bytes when jit fails.
Reported-by: Felix Fietkau <nbd@nbd.name>
Closes: https://lore.kernel.org/bpf/2e267b4b-0540-45d8-9310-e127bf95fc63@nbd.name/
Fixes: 6ebc5030e0 ("bpf: Fix array bounds error with may_goto")
Signed-off-by: KaFai Wan <kafai.wan@linux.dev>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250909144614.2991253-1-kafai.wan@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Now that there's a proper SHA-1 library API, just use that instead of
the low-level SHA-1 compression function. This eliminates the need for
bpf_prog_calc_tag() to implement the SHA-1 padding itself. No
functional change; the computed tags remain the same.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20250811201615.564461-1-ebiggers@kernel.org
Lonial reported that an out-of-bounds access in cgroup local storage
can be crafted via tail calls. Given two programs each utilizing a
cgroup local storage with a different value size, and one program
doing a tail call into the other. The verifier will validate each of
the indivial programs just fine. However, in the runtime context
the bpf_cg_run_ctx holds an bpf_prog_array_item which contains the
BPF program as well as any cgroup local storage flavor the program
uses. Helpers such as bpf_get_local_storage() pick this up from the
runtime context:
ctx = container_of(current->bpf_ctx, struct bpf_cg_run_ctx, run_ctx);
storage = ctx->prog_item->cgroup_storage[stype];
if (stype == BPF_CGROUP_STORAGE_SHARED)
ptr = &READ_ONCE(storage->buf)->data[0];
else
ptr = this_cpu_ptr(storage->percpu_buf);
For the second program which was called from the originally attached
one, this means bpf_get_local_storage() will pick up the former
program's map, not its own. With mismatching sizes, this can result
in an unintended out-of-bounds access.
To fix this issue, we need to extend bpf_map_owner with an array of
storage_cookie[] to match on i) the exact maps from the original
program if the second program was using bpf_get_local_storage(), or
ii) allow the tail call combination if the second program was not
using any of the cgroup local storage maps.
Fixes: 7d9c342789 ("bpf: Make cgroup storages shared between programs on the same cgroup")
Reported-by: Lonial Con <kongln9170@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20250730234733.530041-4-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Given this is only relevant for BPF tail call maps, it is adding up space
and penalizing other map types. We also need to extend this with further
objects to track / compare to. Therefore, lets move this out into a separate
structure and dynamically allocate it only for BPF tail call maps.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20250730234733.530041-2-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----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=/O3j
-----END PGP SIGNATURE-----
Merge tag 'bpf-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Remove usermode driver (UMD) framework (Thomas Weißschuh)
- Introduce Strongly Connected Component (SCC) in the verifier to
detect loops and refine register liveness (Eduard Zingerman)
- Allow 'void *' cast using bpf_rdonly_cast() and corresponding
'__arg_untrusted' for global function parameters (Eduard Zingerman)
- Improve precision for BPF_ADD and BPF_SUB operations in the verifier
(Harishankar Vishwanathan)
- Teach the verifier that constant pointer to a map cannot be NULL
(Ihor Solodrai)
- Introduce BPF streams for error reporting of various conditions
detected by BPF runtime (Kumar Kartikeya Dwivedi)
- Teach the verifier to insert runtime speculation barrier (lfence on
x86) to mitigate speculative execution instead of rejecting the
programs (Luis Gerhorst)
- Various improvements for 'veristat' (Mykyta Yatsenko)
- For CONFIG_DEBUG_KERNEL config warn on internal verifier errors to
improve bug detection by syzbot (Paul Chaignon)
- Support BPF private stack on arm64 (Puranjay Mohan)
- Introduce bpf_cgroup_read_xattr() kfunc to read xattr of cgroup's
node (Song Liu)
- Introduce kfuncs for read-only string opreations (Viktor Malik)
- Implement show_fdinfo() for bpf_links (Tao Chen)
- Reduce verifier's stack consumption (Yonghong Song)
- Implement mprog API for cgroup-bpf programs (Yonghong Song)
* tag 'bpf-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (192 commits)
selftests/bpf: Migrate fexit_noreturns case into tracing_failure test suite
selftests/bpf: Add selftest for attaching tracing programs to functions in deny list
bpf: Add log for attaching tracing programs to functions in deny list
bpf: Show precise rejected function when attaching fexit/fmod_ret to __noreturn functions
bpf: Fix various typos in verifier.c comments
bpf: Add third round of bounds deduction
selftests/bpf: Test invariants on JSLT crossing sign
selftests/bpf: Test cross-sign 64bits range refinement
selftests/bpf: Update reg_bound range refinement logic
bpf: Improve bounds when s64 crosses sign boundary
bpf: Simplify bounds refinement from s32
selftests/bpf: Enable private stack tests for arm64
bpf, arm64: JIT support for private stack
bpf: Move bpf_jit_get_prog_name() to core.c
bpf, arm64: Fix fp initialization for exception boundary
umd: Remove usermode driver framework
bpf/preload: Don't select USERMODE_DRIVER
selftests/bpf: Fix test dynptr/test_dynptr_memset_xdp_chunks failure
selftests/bpf: Fix test dynptr/test_dynptr_copy_xdp failure
selftests/bpf: Increase xdp data size for arm64 64K page size
...
bpf_jit_get_prog_name() will be used by all JITs when enabling support
for private stack. This function is currently implemented in the x86
JIT.
Move the function to core.c so that other JITs can easily use it in
their implementation of private stack.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20250724120257.7299-2-puranjay@kernel.org
Rename the existing sha1_init() to sha1_init_raw(), since it conflicts
with the upcoming library function. This will later be removed, but
this keeps the kernel building for the introduction of the library.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250712232329.818226-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
We may overrun the bounds because linfo and jited_linfo are already
advanced to prog->aux->linfo_idx, hence we must only iterate the
remaining elements until we reach prog->aux->nr_linfo. Adjust the
nr_linfo calculation to fix this. Reported in [0].
[0]: https://lore.kernel.org/bpf/f3527af3b0620ce36e299e97e7532d2555018de2.camel@gmail.com
Reported-by: Eduard Zingerman <eddyz87@gmail.com>
Fixes: 0e521efaf3 ("bpf: Add function to extract program source info")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250705053035.3020320-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In preparation of figuring out the closest program that led to the
current point in the kernel, implement a function that scans through the
stack trace and finds out the closest BPF program when walking down the
stack trace.
Special care needs to be taken to skip over kernel and BPF subprog
frames. We basically scan until we find a BPF main prog frame. The
assumption is that if a program calls into us transitively, we'll
hit it along the way. If not, we end up returning NULL.
Contextually the function will be used in places where we know the
program may have called into us.
Due to reliance on arch_bpf_stack_walk(), this function only works on
x86 with CONFIG_UNWINDER_ORC, arm64, and s390. Remove the warning from
arch_bpf_stack_walk as well since we call it outside bpf_throw()
context.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250703204818.925464-6-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a warning to ensure RCU lock is held around tree lookup, and then
fix one of the invocations in bpf_stack_walker. The program has an
active stack frame and won't disappear. Use the opportunity to remove
unneeded invocation of is_bpf_text_address.
Fixes: f18b03faba ("bpf: Implement BPF exceptions")
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250703204818.925464-5-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Prepare a function for use in future patches that can extract the file
info, line info, and the source line number for a given BPF program
provided it's program counter.
Only the basename of the file path is provided, given it can be
excessively long in some cases.
This will be used in later patches to print source info to the BPF
stream.
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250703204818.925464-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add support for a stream API to the kernel and expose related kfuncs to
BPF programs. Two streams are exposed, BPF_STDOUT and BPF_STDERR. These
can be used for printing messages that can be consumed from user space,
thus it's similar in spirit to existing trace_pipe interface.
The kernel will use the BPF_STDERR stream to notify the program of any
errors encountered at runtime. BPF programs themselves may use both
streams for writing debug messages. BPF library-like code may use
BPF_STDERR to print warnings or errors on misuse at runtime.
The implementation of a stream is as follows. Everytime a message is
emitted from the kernel (directly, or through a BPF program), a record
is allocated by bump allocating from per-cpu region backed by a page
obtained using alloc_pages_nolock(). This ensures that we can allocate
memory from any context. The eventual plan is to discard this scheme in
favor of Alexei's kmalloc_nolock() [0].
This record is then locklessly inserted into a list (llist_add()) so
that the printing side doesn't require holding any locks, and works in
any context. Each stream has a maximum capacity of 4MB of text, and each
printed message is accounted against this limit.
Messages from a program are emitted using the bpf_stream_vprintk kfunc,
which takes a stream_id argument in addition to working otherwise
similar to bpf_trace_vprintk.
The bprintf buffer helpers are extracted out to be reused for printing
the string into them before copying it into the stream, so that we can
(with the defined max limit) format a string and know its true length
before performing allocations of the stream element.
For consuming elements from a stream, we expose a bpf(2) syscall command
named BPF_PROG_STREAM_READ_BY_FD, which allows reading data from the
stream of a given prog_fd into a user space buffer. The main logic is
implemented in bpf_stream_read(). The log messages are queued in
bpf_stream::log by the bpf_stream_vprintk kfunc, and then pulled and
ordered correctly in the stream backlog.
For this purpose, we hold a lock around bpf_stream_backlog_peek(), as
llist_del_first() (if we maintained a second lockless list for the
backlog) wouldn't be safe from multiple threads anyway. Then, if we
fail to find something in the backlog log, we splice out everything from
the lockless log, and place it in the backlog log, and then return the
head of the backlog. Once the full length of the element is consumed, we
will pop it and free it.
The lockless list bpf_stream::log is a LIFO stack. Elements obtained
using a llist_del_all() operation are in LIFO order, thus would break
the chronological ordering if printed directly. Hence, this batch of
messages is first reversed. Then, it is stashed into a separate list in
the stream, i.e. the backlog_log. The head of this list is the actual
message that should always be returned to the caller. All of this is
done in bpf_stream_backlog_fill().
From the kernel side, the writing into the stream will be a bit more
involved than the typical printk. First, the kernel typically may print
a collection of messages into the stream, and parallel writers into the
stream may suffer from interleaving of messages. To ensure each group of
messages is visible atomically, we can lift the advantage of using a
lockless list for pushing in messages.
To enable this, we add a bpf_stream_stage() macro, and require kernel
users to use bpf_stream_printk statements for the passed expression to
write into the stream. Underneath the macro, we have a message staging
API, where a bpf_stream_stage object on the stack accumulates the
messages being printed into a local llist_head, and then a commit
operation splices the whole batch into the stream's lockless log list.
This is especially pertinent for rqspinlock deadlock messages printed to
program streams. After this change, we see each deadlock invocation as a
non-interleaving contiguous message without any confusion on the
reader's part, improving their user experience in debugging the fault.
While programs cannot benefit from this staged stream writing API, they
could just as well hold an rqspinlock around their print statements to
serialize messages, hence this is kept kernel-internal for now.
Overall, this infrastructure provides NMI-safe any context printing of
messages to two dedicated streams.
Later patches will add support for printing splats in case of BPF arena
page faults, rqspinlock deadlocks, and cond_break timeouts, and
integration of this facility into bpftool for dumping messages to user
space.
[0]: https://lore.kernel.org/bpf/20250501032718.65476-1-alexei.starovoitov@gmail.com
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250703204818.925464-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This changes the semantics of BPF_NOSPEC (previously a v4-only barrier)
to always emit a speculation barrier that works against both Spectre v1
AND v4. If mitigation is not needed on an architecture, the backend
should set bpf_jit_bypass_spec_v4/v1().
As of now, this commit only has the user-visible implication that unpriv
BPF's performance on PowerPC is reduced. This is the case because we
have to emit additional v1 barrier instructions for BPF_NOSPEC now.
This commit is required for a future commit to allow us to rely on
BPF_NOSPEC for Spectre v1 mitigation. As of this commit, the feature
that nospec acts as a v1 barrier is unused.
Commit f5e81d1117 ("bpf: Introduce BPF nospec instruction for
mitigating Spectre v4") noted that mitigation instructions for v1 and v4
might be different on some archs. While this would potentially offer
improved performance on PowerPC, it was dismissed after the following
considerations:
* Only having one barrier simplifies the verifier and allows us to
easily rely on v4-induced barriers for reducing the complexity of
v1-induced speculative path verification.
* For the architectures that implemented BPF_NOSPEC, only PowerPC has
distinct instructions for v1 and v4. Even there, some insns may be
shared between the barriers for v1 and v4 (e.g., 'ori 31,31,0' and
'sync'). If this is still found to impact performance in an
unacceptable way, BPF_NOSPEC can be split into BPF_NOSPEC_V1 and
BPF_NOSPEC_V4 later. As an optimization, we can already skip v1/v4
insns from being emitted for PowerPC with this setup if
bypass_spec_v1/v4 is set.
Vulnerability-status for BPF_NOSPEC-based Spectre mitigations (v4 as of
this commit, v1 in the future) is therefore:
* x86 (32-bit and 64-bit), ARM64, and PowerPC (64-bit): Mitigated - This
patch implements BPF_NOSPEC for these architectures. The previous
v4-only version was supported since commit f5e81d1117 ("bpf:
Introduce BPF nospec instruction for mitigating Spectre v4") and
commit b7540d6250 ("powerpc/bpf: Emit stf barrier instruction
sequences for BPF_NOSPEC").
* LoongArch: Not Vulnerable - Commit a6f6a95f25 ("LoongArch, bpf: Fix
jit to skip speculation barrier opcode") is the only other past commit
related to BPF_NOSPEC and indicates that the insn is not required
there.
* MIPS: Vulnerable (if unprivileged BPF is enabled) -
Commit a6f6a95f2580 ("LoongArch, bpf: Fix jit to skip speculation
barrier opcode") indicates that it is not vulnerable, but this
contradicts the kernel and Debian documentation. Therefore, I assume
that there exist vulnerable MIPS CPUs (but maybe not from Loongson?).
In the future, BPF_NOSPEC could be implemented for MIPS based on the
GCC speculation_barrier [1]. For now, we rely on unprivileged BPF
being disabled by default.
* Other: Unknown - To the best of my knowledge there is no definitive
information available that indicates that any other arch is
vulnerable. They are therefore left untouched (BPF_NOSPEC is not
implemented, but bypass_spec_v1/v4 is also not set).
I did the following testing to ensure the insn encoding is correct:
* ARM64:
* 'dsb nsh; isb' was successfully tested with the BPF CI in [2]
* 'sb' locally using QEMU v7.2.15 -cpu max (emitted sb insn is
executed for example with './test_progs -t verifier_array_access')
* PowerPC: The following configs were tested locally with ppc64le QEMU
v8.2 '-machine pseries -cpu POWER9':
* STF_BARRIER_EIEIO + CONFIG_PPC_BOOK32_64
* STF_BARRIER_SYNC_ORI (forced on) + CONFIG_PPC_BOOK32_64
* STF_BARRIER_FALLBACK (forced on) + CONFIG_PPC_BOOK32_64
* CONFIG_PPC_E500 (forced on) + STF_BARRIER_EIEIO
* CONFIG_PPC_E500 (forced on) + STF_BARRIER_SYNC_ORI (forced on)
* CONFIG_PPC_E500 (forced on) + STF_BARRIER_FALLBACK (forced on)
* CONFIG_PPC_E500 (forced on) + STF_BARRIER_NONE (forced on)
Most of those cobinations should not occur in practice, but I was not
able to get an PPC e6500 rootfs (for testing PPC_E500 without forcing
it on). In any case, this should ensure that there are no unexpected
conflicts between the insns when combined like this. Individual v1/v4
barriers were already emitted elsewhere.
Hari's ack is for the PowerPC changes only.
[1] https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=29b74545531f6afbee9fc38c267524326dbfbedf
("MIPS: Add speculation_barrier support")
[2] https://github.com/kernel-patches/bpf/pull/8576
Signed-off-by: Luis Gerhorst <luis.gerhorst@fau.de>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Cc: Henriette Herzog <henriette.herzog@rub.de>
Cc: Maximilian Ott <ott@cs.fau.de>
Cc: Milan Stephan <milan.stephan@fau.de>
Link: https://lore.kernel.org/r/20250603211703.337860-1-luis.gerhorst@fau.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
JITs can set bpf_jit_bypass_spec_v1/v4() if they want the verifier to
skip analysis/patching for the respective vulnerability. For v4, this
will reduce the number of barriers the verifier inserts. For v1, it
allows more programs to be accepted.
The primary motivation for this is to not regress unpriv BPF's
performance on ARM64 in a future commit where BPF_NOSPEC is also used
against Spectre v1.
This has the user-visible change that v1-induced rejections on
non-vulnerable PowerPC CPUs are avoided.
For now, this does not change the semantics of BPF_NOSPEC. It is still a
v4-only barrier and must not be implemented if bypass_spec_v4 is always
true for the arch. Changing it to a v1 AND v4-barrier is done in a
future commit.
As an alternative to bypass_spec_v1/v4, one could introduce NOSPEC_V1
AND NOSPEC_V4 instructions and allow backends to skip their lowering as
suggested by commit f5e81d1117 ("bpf: Introduce BPF nospec instruction
for mitigating Spectre v4"). Adding bpf_jit_bypass_spec_v1/v4() was
found to be preferable for the following reason:
* bypass_spec_v1/v4 benefits non-vulnerable CPUs: Always performing the
same analysis (not taking into account whether the current CPU is
vulnerable), needlessly restricts users of CPUs that are not
vulnerable. The only use case for this would be portability-testing,
but this can later be added easily when needed by allowing users to
force bypass_spec_v1/v4 to false.
* Portability is still acceptable: Directly disabling the analysis
instead of skipping the lowering of BPF_NOSPEC(_V1/V4) might allow
programs on non-vulnerable CPUs to be accepted while the program will
be rejected on vulnerable CPUs. With the fallback to speculation
barriers for Spectre v1 implemented in a future commit, this will only
affect programs that do variable stack-accesses or are very complex.
For PowerPC, the SEC_FTR checking in bpf_jit_bypass_spec_v4() is based
on the check that was previously located in the BPF_NOSPEC case.
For LoongArch, it would likely be safe to set both
bpf_jit_bypass_spec_v1() and _v4() according to
commit a6f6a95f2580 ("LoongArch, bpf: Fix jit to skip speculation
barrier opcode"). This is omitted here as I am unable to do any testing
for LoongArch.
Hari's ack concerns the PowerPC part only.
Signed-off-by: Luis Gerhorst <luis.gerhorst@fau.de>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Cc: Henriette Herzog <henriette.herzog@rub.de>
Cc: Maximilian Ott <ott@cs.fau.de>
Cc: Milan Stephan <milan.stephan@fau.de>
Link: https://lore.kernel.org/r/20250603211318.337474-1-luis.gerhorst@fau.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
syzkaller reported an issue:
WARNING: CPU: 3 PID: 217 at kernel/bpf/core.c:2357 __bpf_prog_ret0_warn+0xa/0x20 kernel/bpf/core.c:2357
Modules linked in:
CPU: 3 UID: 0 PID: 217 Comm: kworker/u32:6 Not tainted 6.15.0-rc4-syzkaller-00040-g8bac8898fe39
RIP: 0010:__bpf_prog_ret0_warn+0xa/0x20 kernel/bpf/core.c:2357
Call Trace:
<TASK>
bpf_dispatcher_nop_func include/linux/bpf.h:1316 [inline]
__bpf_prog_run include/linux/filter.h:718 [inline]
bpf_prog_run include/linux/filter.h:725 [inline]
cls_bpf_classify+0x74a/0x1110 net/sched/cls_bpf.c:105
...
When creating bpf program, 'fp->jit_requested' depends on bpf_jit_enable.
This issue is triggered because of CONFIG_BPF_JIT_ALWAYS_ON is not set
and bpf_jit_enable is set to 1, causing the arch to attempt JIT the prog,
but jit failed due to FAULT_INJECTION. As a result, incorrectly
treats the program as valid, when the program runs it calls
`__bpf_prog_ret0_warn` and triggers the WARN_ON_ONCE(1).
Reported-by: syzbot+0903f6d7f285e41cdf10@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/bpf/6816e34e.a70a0220.254cdc.002c.GAE@google.com
Fixes: fa9dd599b4 ("bpf: get rid of pure_initcall dependency to enable jits")
Signed-off-by: KaFai Wan <mannkafai@gmail.com>
Link: https://lore.kernel.org/r/20250526133358.2594176-1-mannkafai@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In the current implementation if the program is dev-bound to a specific
device, it will not be possible to perform XDP_REDIRECT into a DEVMAP
or CPUMAP even if the program is running in the driver NAPI context and
it is not attached to any map entry. This seems in contrast with the
explanation available in bpf_prog_map_compatible routine.
Fix the issue introducing __bpf_prog_map_compatible utility routine in
order to avoid bpf_prog_is_dev_bound() check running bpf_check_tail_call()
at program load time (bpf_prog_select_runtime()).
Continue forbidding to attach a dev-bound program to XDP maps
(BPF_MAP_TYPE_PROG_ARRAY, BPF_MAP_TYPE_DEVMAP and BPF_MAP_TYPE_CPUMAP).
Fixes: 3d76a4d3d4 ("bpf: XDP metadata RX kfuncs")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
The perf_event_read_event_output helper is currently only available to
tracing protrams, but is useful for other BPF programs like sched_ext
schedulers. When the helper is available, provide its bpf_func_proto
directly from the bpf base_proto.
Signed-off-by: Emil Tsalapatis (Meta) <emil@etsalapatis.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20250318030753.10949-1-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce BPF instructions with load-acquire and store-release
semantics, as discussed in [1]. Define 2 new flags:
#define BPF_LOAD_ACQ 0x100
#define BPF_STORE_REL 0x110
A "load-acquire" is a BPF_STX | BPF_ATOMIC instruction with the 'imm'
field set to BPF_LOAD_ACQ (0x100).
Similarly, a "store-release" is a BPF_STX | BPF_ATOMIC instruction with
the 'imm' field set to BPF_STORE_REL (0x110).
Unlike existing atomic read-modify-write operations that only support
BPF_W (32-bit) and BPF_DW (64-bit) size modifiers, load-acquires and
store-releases also support BPF_B (8-bit) and BPF_H (16-bit). As an
exception, however, 64-bit load-acquires/store-releases are not
supported on 32-bit architectures (to fix a build error reported by the
kernel test robot).
An 8- or 16-bit load-acquire zero-extends the value before writing it to
a 32-bit register, just like ARM64 instruction LDARH and friends.
Similar to existing atomic read-modify-write operations, misaligned
load-acquires/store-releases are not allowed (even if
BPF_F_ANY_ALIGNMENT is set).
As an example, consider the following 64-bit load-acquire BPF
instruction (assuming little-endian):
db 10 00 00 00 01 00 00 r0 = load_acquire((u64 *)(r1 + 0x0))
opcode (0xdb): BPF_ATOMIC | BPF_DW | BPF_STX
imm (0x00000100): BPF_LOAD_ACQ
Similarly, a 16-bit BPF store-release:
cb 21 00 00 10 01 00 00 store_release((u16 *)(r1 + 0x0), w2)
opcode (0xcb): BPF_ATOMIC | BPF_H | BPF_STX
imm (0x00000110): BPF_STORE_REL
In arch/{arm64,s390,x86}/net/bpf_jit_comp.c, have
bpf_jit_supports_insn(..., /*in_arena=*/true) return false for the new
instructions, until the corresponding JIT compiler supports them in
arena.
[1] https://lore.kernel.org/all/20240729183246.4110549-1-yepeilin@google.com/
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Peilin Ye <yepeilin@google.com>
Link: https://lore.kernel.org/r/a217f46f0e445fbd573a1a024be5c6bf1d5fe716.1741049567.git.yepeilin@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Implement support in the verifier for replacing may_goto implementation
from a counter-based approach to one which samples time on the local CPU
to have a bigger loop bound.
We implement it by maintaining 16-bytes per-stack frame, and using 8
bytes for maintaining the count for amortizing time sampling, and 8
bytes for the starting timestamp. To minimize overhead, we need to avoid
spilling and filling of registers around this sequence, so we push this
cost into the time sampling function 'arch_bpf_timed_may_goto'. This is
a JIT-specific wrapper around bpf_check_timed_may_goto which returns us
the count to store into the stack through BPF_REG_AX. All caller-saved
registers (r0-r5) are guaranteed to remain untouched.
The loop can be broken by returning count as 0, otherwise we dispatch
into the function when the count drops to 0, and the runtime chooses to
refresh it (by returning count as BPF_MAX_TIMED_LOOPS) or returning 0
and aborting the loop on next iteration.
Since the check for 0 is done right after loading the count from the
stack, all subsequent cond_break sequences should immediately break as
well, of the same loop or subsequent loops in the program.
We pass in the stack_depth of the count (and thus the timestamp, by
adding 8 to it) to the arch_bpf_timed_may_goto call so that it can be
passed in to bpf_check_timed_may_goto as an argument after r1 is saved,
by adding the offset to r10/fp. This adjustment will be arch specific,
and the next patch will introduce support for x86.
Note that depending on loop complexity, time spent in the loop can be
more than the current limit (250 ms), but imposing an upper bound on
program runtime is an orthogonal problem which will be addressed when
program cancellations are supported.
The current time afforded by cond_break may not be enough for cases
where BPF programs want to implement locking algorithms inline, and use
cond_break as a promise to the verifier that they will eventually
terminate.
Below are some benchmarking numbers on the time taken per-iteration for
an empty loop that counts the number of iterations until cond_break
fires. For comparison, we compare it against bpf_for/bpf_repeat which is
another way to achieve the same number of spins (BPF_MAX_LOOPS). The
hardware used for benchmarking was a Sapphire Rapids Intel server with
performance governor enabled, mitigations were enabled.
+-----------------------------+--------------+--------------+------------------+
| Loop type | Iterations | Time (ms) | Time/iter (ns) |
+-----------------------------|--------------+--------------+------------------+
| may_goto | 8388608 | 3 | 0.36 |
| timed_may_goto (count=65535)| 589674932 | 250 | 0.42 |
| bpf_for | 8388608 | 10 | 1.19 |
+-----------------------------+--------------+--------------+------------------+
This gives a good approximation at low overhead while staying close to
the current implementation.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250304003239.2390751-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
may_goto uses an additional 8 bytes on the stack, which causes the
interpreters[] array to go out of bounds when calculating index by
stack_size.
1. If a BPF program is rewritten, re-evaluate the stack size. For non-JIT
cases, reject loading directly.
2. For non-JIT cases, calculating interpreters[idx] may still cause
out-of-bounds array access, and just warn about it.
3. For jit_requested cases, the execution of bpf_func also needs to be
warned. So move the definition of function __bpf_prog_ret0_warn out of
the macro definition CONFIG_BPF_JIT_ALWAYS_ON.
Reported-by: syzbot+d2a2c639d03ac200a4f1@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/bpf/0000000000000f823606139faa5d@google.com/
Fixes: 011832b97b ("bpf: Introduce may_goto instruction")
Signed-off-by: Jiayuan Chen <mrpre@163.com>
Link: https://lore.kernel.org/r/20250214091823.46042-2-mrpre@163.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The bpf_remove_insns() function returns WARN_ON_ONCE(error), where
error is a result of bpf_adj_branches(), and thus should be always 0
However, if for any reason it is not 0, then it will be converted to
boolean by WARN_ON_ONCE and returned to user space as 1, not an actual
error value. Fix this by returning the original err after the WARN check.
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241210114245.836164-1-aspsk@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use BPF helper number instead of function pointer in
bpf_helper_changes_pkt_data(). This would simplify usage of this
function in verifier.c:check_cfg() (in a follow-up patch),
where only helper number is easily available and there is no real need
to lookup helper proto.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----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=TXGS
-----END PGP SIGNATURE-----
Merge tag 'bpf-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Add BPF uprobe session support (Jiri Olsa)
- Optimize uprobe performance (Andrii Nakryiko)
- Add bpf_fastcall support to helpers and kfuncs (Eduard Zingerman)
- Avoid calling free_htab_elem() under hash map bucket lock (Hou Tao)
- Prevent tailcall infinite loop caused by freplace (Leon Hwang)
- Mark raw_tracepoint arguments as nullable (Kumar Kartikeya Dwivedi)
- Introduce uptr support in the task local storage map (Martin KaFai
Lau)
- Stringify errno log messages in libbpf (Mykyta Yatsenko)
- Add kmem_cache BPF iterator for perf's lock profiling (Namhyung Kim)
- Support BPF objects of either endianness in libbpf (Tony Ambardar)
- Add ksym to struct_ops trampoline to fix stack trace (Xu Kuohai)
- Introduce private stack for eligible BPF programs (Yonghong Song)
- Migrate samples/bpf tests to selftests/bpf test_progs (Daniel T. Lee)
- Migrate test_sock to selftests/bpf test_progs (Jordan Rife)
* tag 'bpf-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (152 commits)
libbpf: Change hash_combine parameters from long to unsigned long
selftests/bpf: Fix build error with llvm 19
libbpf: Fix memory leak in bpf_program__attach_uprobe_multi
bpf: use common instruction history across all states
bpf: Add necessary migrate_disable to range_tree.
bpf: Do not alloc arena on unsupported arches
selftests/bpf: Set test path for token/obj_priv_implicit_token_envvar
selftests/bpf: Add a test for arena range tree algorithm
bpf: Introduce range_tree data structure and use it in bpf arena
samples/bpf: Remove unused variable in xdp2skb_meta_kern.c
samples/bpf: Remove unused variables in tc_l2_redirect_kern.c
bpftool: Cast variable `var` to long long
bpf, x86: Propagate tailcall info only for subprogs
bpf: Add kernel symbol for struct_ops trampoline
bpf: Use function pointers count as struct_ops links count
bpf: Remove unused member rcu from bpf_struct_ops_map
selftests/bpf: Add struct_ops prog private stack tests
bpf: Support private stack for struct_ops progs
selftests/bpf: Add tracing prog private stack tests
bpf, x86: Support private stack in jit
...
-----BEGIN PGP SIGNATURE-----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=o4ww
-----END PGP SIGNATURE-----
Merge tag 'random-6.13-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"This contains a single series from Uros to replace uses of
<linux/random.h> with prandom.h or other more specific headers
as needed, in order to avoid a circular header issue.
Uros' goal is to be able to use percpu.h from prandom.h, which
will then allow him to define __percpu in percpu.h rather than
in compiler_types.h"
* tag 'random-6.13-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
prandom: Include <linux/percpu.h> in <linux/prandom.h>
random: Do not include <linux/prandom.h> in <linux/random.h>
netem: Include <linux/prandom.h> in sch_netem.c
lib/test_scanf: Include <linux/prandom.h> instead of <linux/random.h>
lib/test_parman: Include <linux/prandom.h> instead of <linux/random.h>
bpf/tests: Include <linux/prandom.h> instead of <linux/random.h>
lib/rbtree-test: Include <linux/prandom.h> instead of <linux/random.h>
random32: Include <linux/prandom.h> instead of <linux/random.h>
kunit: string-stream-test: Include <linux/prandom.h>
lib/interval_tree_test.c: Include <linux/prandom.h> instead of <linux/random.h>
bpf: Include <linux/prandom.h> instead of <linux/random.h>
scsi: libfcoe: Include <linux/prandom.h> instead of <linux/random.h>
fscrypt: Include <linux/once.h> in fs/crypto/keyring.c
mtd: tests: Include <linux/prandom.h> instead of <linux/random.h>
media: vivid: Include <linux/prandom.h> in vivid-vid-cap.c
drm/lib: Include <linux/prandom.h> instead of <linux/random.h>
drm/i915/selftests: Include <linux/prandom.h> instead of <linux/random.h>
crypto: testmgr: Include <linux/prandom.h> instead of <linux/random.h>
x86/kaslr: Include <linux/prandom.h> instead of <linux/random.h>
Private stack will be allocated with percpu allocator in jit time.
To avoid complexity at runtime, only one copy of private stack is
available per cpu per prog. So runtime recursion check is necessary
to avoid stack corruption.
Current private stack only supports kprobe/perf_event/tp/raw_tp
which has recursion check in the kernel, and prog types that use
bpf trampoline recursion check. For trampoline related prog types,
currently only tracing progs have recursion checking.
To avoid complexity, all async_cb subprogs use normal kernel stack
including those subprogs used by both main prog subtree and async_cb
subtree. Any prog having tail call also uses kernel stack.
To avoid jit penalty with private stack support, a subprog stack
size threshold is set such that only if the stack size is no less
than the threshold, private stack is supported. The current threshold
is 64 bytes. This avoids jit penality if the stack usage is small.
A useless 'continue' is also removed from a loop in func
check_max_stack_depth().
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20241112163907.2223839-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There is a potential infinite loop issue that can occur when using a
combination of tail calls and freplace.
In an upcoming selftest, the attach target for entry_freplace of
tailcall_freplace.c is subprog_tc of tc_bpf2bpf.c, while the tail call in
entry_freplace leads to entry_tc. This results in an infinite loop:
entry_tc -> subprog_tc -> entry_freplace --tailcall-> entry_tc.
The problem arises because the tail_call_cnt in entry_freplace resets to
zero each time entry_freplace is executed, causing the tail call mechanism
to never terminate, eventually leading to a kernel panic.
To fix this issue, the solution is twofold:
1. Prevent updating a program extended by an freplace program to a
prog_array map.
2. Prevent extending a program that is already part of a prog_array map
with an freplace program.
This ensures that:
* If a program or its subprogram has been extended by an freplace program,
it can no longer be updated to a prog_array map.
* If a program has been added to a prog_array map, neither it nor its
subprograms can be extended by an freplace program.
Moreover, an extension program should not be tailcalled. As such, return
-EINVAL if the program has a type of BPF_PROG_TYPE_EXT when adding it to a
prog_array map.
Additionally, fix a minor code style issue by replacing eight spaces with a
tab for proper formatting.
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20241015150207.70264-2-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Substitute the inclusion of <linux/random.h> header with
<linux/prandom.h> to allow the removal of legacy inclusion
of <linux/prandom.h> from <linux/random.h>.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Song Liu <song@kernel.org>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Stanislav Fomichev <sdf@fomichev.me>
Cc: Hao Luo <haoluo@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
Jenny Guanni Qu
Sachin Kumar
Linus Torvalds
Kees Cook
Leon Hwang
Jiri Olsa
Petr Mladek
Randy Dunlap
Puranjay Mohan
Alexei Starovoitov
Josh Poimboeuf
Amery Hung
Menglong Dong
Anton Protopopov
Daniel Borkmann
KP Singh
KaFai Wan
Eric Biggers
Jiri Olsa
Kumar Kartikeya Dwivedi
Luis Gerhorst
KaFai Wan
Lorenzo Bianconi
Emil Tsalapatis
Peilin Ye
Jiayuan Chen
Anton Protopopov
Eduard Zingerman
Yonghong Song
Uros Bizjak
Al Viro