allocating dentry after the inode has been set up reduces the amount
of boilerplate - "attach this inode under that name and this parent
or drop inode in case of failure" simplifies quite a few places.
Acked-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Tested-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Don't bother to store the dentry of /policy_capabilities - it belongs
to invariant part of tree and we only use it to populate that directory,
so there's no reason to keep it around afterwards.
Same situation as with /avc, /ss, etc. There are two directories that
get replaced on policy load - /class and /booleans. These we need to
stash (and update the pointers on policy reload); /policy_capabilities
is not in the same boat.
Acked-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Tested-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Entirely static tree populated by simple_fill_super(). Can use
kill_anon_super() as-is.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
These are guaranteed to be empty by the time they are shut down;
both are single-instance and there is an internal mount maintained
for as long as there is any contents.
Both have that internal mount pinned by every object in root.
In other words, kill_litter_super() boils down to kill_anon_super()
for those.
Reviewed-by: Joel Becker <jlbec@evilplan.org>
Acked-by: Paul Moore <paul@paul-moore> (LSM)
Acked-by: Andreas Hindborg <a.hindborg@kernel.org> (configfs)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
A few callers want to lock for a rename and already have both dentries.
Also debugfs does want to perform a lookup but doesn't want permission
checking, so start_renaming_dentry() cannot be used.
This patch introduces start_renaming_two_dentries() which is given both
dentries. debugfs performs one lookup itself. As it will only continue
with a negative dentry and as those cannot be renamed or unlinked, it is
safe to do the lookup before getting the rename locks.
overlayfs uses start_renaming_two_dentries() in three places and selinux
uses it twice in sel_make_policy_nodes().
In sel_make_policy_nodes() we now lock for rename twice instead of just
once so the combined operation is no longer atomic w.r.t the parent
directory locks. As selinux_state.policy_mutex is held across the whole
operation this does not open up any interesting races.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://patch.msgid.link/20251113002050.676694-13-neilb@ownmail.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
start_removing_dentry() is similar to start_removing() but instead of
providing a name for lookup, the target dentry is given.
start_removing_dentry() checks that the dentry is still hashed and in
the parent, and if so it locks and increases the refcount so that
end_removing() can be used to finish the operation.
This is used in cachefiles, overlayfs, smb/server, and apparmor.
There will be other users including ecryptfs.
As start_removing_dentry() takes an extra reference to the dentry (to be
put by end_removing()), there is no need to explicitly take an extra
reference to stop d_delete() from using dentry_unlink_inode() to negate
the dentry - as in cachefiles_delete_object(), and ksmbd_vfs_unlink().
cachefiles_bury_object() now gets an extra ref to the victim, which is
drops. As it includes the needed end_removing() calls, the caller
doesn't need them.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://patch.msgid.link/20251113002050.676694-9-neilb@ownmail.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
Replace set_access(), set_majmin(), and type_to_char() with new helpers
seq_putaccess(), seq_puttype(), and seq_putversion() that write directly
to 'seq_file'.
Simplify devcgroup_seq_show() by hard-coding "a *:* rwm", and use the
new seq_put* helper functions to list the exceptions otherwise.
This allows us to remove the intermediate string buffers while
maintaining the same functionality, including wildcard handling.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This is a preparation patch, no functional change.
Signed-off-by: Hongru Zhang <zhanghongru@xiaomi.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
On mobile device high-load situations, permission check can happen
more than 90,000/s (8 core system). With default 512 cache nodes
configuration, avc cache miss happens more often and occasionally
leads to long time (>2ms) irqs off on both big and little cores,
which decreases system real-time capability.
An actual call stack is as follows:
=> avc_compute_av
=> avc_perm_nonode
=> avc_has_perm_noaudit
=> selinux_capable
=> security_capable
=> capable
=> __sched_setscheduler
=> do_sched_setscheduler
=> __arm64_sys_sched_setscheduler
=> invoke_syscall
=> el0_svc_common
=> do_el0_svc
=> el0_svc
=> el0t_64_sync_handler
=> el0t_64_sync
Although we can expand avc nodes through /sys/fs/selinux/cache_threshold
to mitigate long time irqs off, hash conflicts make the bucket average
length longer because of the fixed size of cache slots, leading to
avc_search_node() latency increase.
So introduce a new config to make avc cache slot size also configurable,
and with fine tuning, we can mitigate long time irqs off with slightly
avc_search_node() performance regression.
Theoretically, the main overhead is memory consumption.
Signed-off-by: Hongru Zhang <zhanghongru@xiaomi.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Instead of passing pkey_info into dump_options by value, using a
pointer instead.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Prior to this change, no security hooks were called at the creation of a
memfd file. It means that, for SELinux as an example, it will receive
the default type of the filesystem that backs the in-memory inode. In
most cases, that would be tmpfs, but if MFD_HUGETLB is passed, it will
be hugetlbfs. Both can be considered implementation details of memfd.
It also means that it is not possible to differentiate between a file
coming from memfd_create and a file coming from a standard tmpfs mount
point.
Additionally, no permission is validated at creation, which differs from
the similar memfd_secret syscall.
Call security_inode_init_security_anon during creation. This ensures
that the file is setup similarly to other anonymous inodes. On SELinux,
it means that the file will receive the security context of its task.
The ability to limit fexecve on memfd has been of interest to avoid
potential pitfalls where /proc/self/exe or similar would be executed
[1][2]. Reuse the "execute_no_trans" and "entrypoint" access vectors,
similarly to the file class. These access vectors may not make sense for
the existing "anon_inode" class. Therefore, define and assign a new
class "memfd_file" to support such access vectors.
Guard these changes behind a new policy capability named "memfd_class".
[1] https://crbug.com/1305267
[2] https://lore.kernel.org/lkml/20221215001205.51969-1-jeffxu@google.com/
Signed-off-by: Thiébaud Weksteen <tweek@google.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Tested-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
[PM: subj tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Add a new LSM notifier event, LSM_STARTED_ALL, which is fired once at
boot when all of the LSMs have been started.
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The LSM framework itself registers a small number of initcalls, this
patch converts these initcalls into the new initcall mechanism.
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
SELinux currently has a number of initcalls so we've created a new
function, selinux_initcall(), which wraps all of these initcalls so
that we have a single initcall function that can be registered with the
LSM framework.
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch converts IMA and EVM to use the LSM frameworks's initcall
mechanism. It moved the integrity_fs_init() call to ima_fs_init() and
evm_init_secfs(), to work around the fact that there is no "integrity" LSM,
and introduced integrity_fs_fini() to remove the integrity directory, if
empty. Both integrity_fs_init() and integrity_fs_fini() support the
scenario of being called by both the IMA and EVM LSMs.
This patch does not touch any of the platform certificate code that
lives under the security/integrity/platform_certs directory as the
IMA/EVM developers would prefer to address that in a future patchset.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
[PM: adjust description as discussed over email]
Signed-off-by: Paul Moore <paul@paul-moore.com>
As the LSM framework only supports one LSM initcall callback for each
initcall type, the init_smk_fs() and smack_nf_ip_init() functions were
wrapped with a new function, smack_initcall() that is registered with
the LSM framework.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Tested-by: Fan Wu <wufan@kernel.org>
Acked-by: Fan Wu <wufan@kernel.org>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Currently the individual LSMs register their own initcalls, and while
this should be harmless, it can be wasteful in the case where a LSM
is disabled at boot as the initcall will still be executed. This
patch introduces support for managing the initcalls in the LSM
framework, and future patches will convert the existing LSMs over to
this new mechanism.
Only initcall types which are used by the current in-tree LSMs are
supported, additional initcall types can easily be added in the future
if needed.
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Move the lsm_order_parse() function near the other lsm_order_*()
functions to improve readability.
No code changes.
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This will display all of the LSMs built into the kernel, regardless
of if they are enabled or not.
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Move away from an init specific init_debug() macro to a more general
lsm_pr()/lsm_pr_cont()/lsm_pr_dbg() set of macros that are available
both before and after init. In the process we do a number of minor
changes to improve the LSM initialization output and cleanup the code
somewhat.
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Add function header comments for lsm_static_call_init() and
early_security_init(), tweak the existing comment block for
security_add_hooks().
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
With only security_init() calling lsm_init_ordered, it makes little
sense to keep lsm_init_ordered() as a standalone function. Fold
lsm_init_ordered() into security_init().
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Rename initialize_lsm() to be more consistent with the rest of the LSM
initialization changes and rework the function itself to better fit
with the "exit on fail" coding pattern.
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Convert the lsm_blob_size fields to unsigned integers as there is no
current need for them to be negative, change "lsm_set_blob_size()" to
"lsm_blob_size_update()" to better reflect reality, and perform some
other minor cleanups to the associated code.
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Rename ordered_lsm_parse() to lsm_order_parse() for the sake of
consistency with the other LSM initialization routines, and also
do some minor rework of the function. Aside from some minor style
decisions, the majority of the rework involved shuffling the order
of the LSM_FLAG_LEGACY and LSM_ORDER_FIRST code so that the
LSM_FLAG_LEGACY checks are handled first; it is important to note
that this doesn't affect the order in which the LSMs are registered.
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Rename append_ordered_lsm() to lsm_order_append() to better match
convention and do some rework. The rework includes moving the
LSM_FLAG_EXCLUSIVE logic from lsm_prepare() to lsm_order_append()
in order to consolidate the individual LSM append/activation code,
and adding logic to skip appending explicitly disabled LSMs to the
active LSM list.
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Also add a header comment block to the function.
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
In addition to style changes, rename set_enabled() to lsm_enabled_set()
and is_enabled() to lsm_is_enabled() to better fit within the LSM
initialization code.
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The LSM currently has a lot of code to maintain a list of the currently
active LSMs in a human readable string, with the only user being the
"/sys/kernel/security/lsm" code. Let's drop all of that code and
generate the string on first use and then cache it for subsequent use.
Signed-off-by: Paul Moore <paul@paul-moore.com>
Move the LSM active count and lsm_id list declarations out of a header
that is visible across the kernel and into a header that is limited to
the LSM framework. This not only helps keep the include/linux headers
smaller and cleaner, it helps prevent misuse of these variables.
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Rename the builtin_lsm_order variable to lsm_order_builtin,
chosen_lsm_order to lsm_order_cmdline, chosen_major_lsm to
lsm_order_legacy, ordered_lsms[] to lsm_order[], and exclusive
to lsm_exclusive.
This patch also renames the associated kernel command line parsing
functions and adds some basic function comment blocks. The parsing
function choose_major_lsm() was renamed to lsm_choose_security(),
choose_lsm_order() to lsm_choose_lsm(), and enable_debug() to
lsm_debug_enable().
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Reduce the duplication between the lsm_id struct and the DEFINE_LSM()
definition by linking the lsm_id struct directly into the individual
LSM's DEFINE_LSM() instance.
Linking the lsm_id into the LSM definition also allows us to simplify
the security_add_hooks() function by removing the code which populates
the lsm_idlist[] array and moving it into the normal LSM startup code
where the LSM list is parsed and the individual LSMs are enabled,
making for a cleaner implementation with less overhead at boot.
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The new name more closely fits the rest of the naming scheme in
security/lsm_init.c. This patch also adds a trivial comment block to
the top of the function.
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
With only one caller of lsm_early_cred() and lsm_early_task(), insert
the functions' code directly into the caller and ger rid of the two
functions.
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
With only one caller of report_lsm_order(), insert the function's code
directly into the caller and ger rid of report_lsm_order().
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
There are three common for loop patterns in the LSM initialization code
to loop through the ordered LSM list and the registered "early" LSMs.
This patch implements these loop patterns as macros to help simplify the
code and reduce the chance for errors.
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Simplify and consolidate the lsm_allowed() and prepare_lsm() functions
into a new function, lsm_prepare().
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Continue to pull code out of security/security.c to help improve
readability by pulling all of the LSM framework initialization
code out into a new file.
No code changes.
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
In an effort to decompose security/security.c somewhat to make it less
twisted and unwieldy, pull out the LSM notifier code into a new file
as it is fairly well self-contained.
No code changes.
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
- CAAM supports two types of protected keys:
-- Plain key encrypted with ECB
-- Plain key encrypted with CCM
Due to robustness, default encryption used for protected key is CCM.
- Generate protected key blob and add it to trusted key payload.
This is done as part of sealing operation, which is triggered
when below two operations are requested:
-- new key generation
-- load key,
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Linux systems often use FUSE for several different purposes, where the
contents of some FUSE instances can be of more interest for auditing
than others.
Allow distinguishing between them based on the filesystem subtype
(s_subtype) using the new condition "fs_subtype".
The subtype string is supplied by userspace FUSE daemons
when a FUSE connection is initialized, so policy authors who want to
filter based on subtype need to ensure that FUSE mount operations are
sufficiently audited or restricted.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
"measure", "appraise" and "hash" actions all have corresponding "dont_*"
actions, but "audit" currently lacks that. This means it is not
currently possible to have a policy that audits everything by default,
but excludes specific cases.
This seems to have been an oversight back when the "audit" action was
added.
Add a corresponding "dont_audit" action to enable such uses.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Since commit 56305aa9b6 ("exec: Compute file based creds only once"), the
credentials to be applied to the process after execution are not calculated
anymore for each step of finding intermediate interpreters (including the
final binary), but only after the final binary to be executed without
interpreter has been found.
In particular, that means that the bprm_check_security LSM hook will not
see the updated cred->e[ug]id for the intermediate and for the final binary
to be executed, since the function doing this task has been moved from
prepare_binprm(), which calls the bprm_check_security hook, to
bprm_creds_from_file().
This breaks the IMA expectation for the CREDS_CHECK hook, introduced with
commit d906c10d8a ("IMA: Support using new creds in appraisal policy"),
which expects to evaluate "the credentials that will be committed when the
new process is started". This is clearly not the case for the CREDS_CHECK
IMA hook, which is attached to bprm_check_security.
This issue does not affect systems which load a policy with the BPRM_CHECK
hook with no other criteria, as is the case with the built-in "tcb" and/or
"appraise_tcb" IMA policies. The "tcb" built-in policy measures all
executions regardless of the new credentials, and the "appraise_tcb" policy
is written in terms of the file owner, rather than IMA hooks.
However, it does affect systems without a BPRM_CHECK policy rule or with a
BPRM_CHECK policy rule that does not include what CREDS_CHECK evaluates. As
an extreme example, taking a standalone rule like:
measure func=CREDS_CHECK euid=0
This will not measure for example sudo (because CREDS_CHECK still sees the
bprm->cred->euid set to the regular user UID), but only the subsequent
commands after the euid was applied to the children.
Make set[ug]id programs measured/appraised again by splitting
ima_bprm_check() in two separate hook implementations (CREDS_CHECK now
being implemented by ima_creds_check()), and by attaching CREDS_CHECK to
the bprm_creds_from_file LSM hook.
The limitation of this approach is that CREDS_CHECK will not be invoked
anymore for the intermediate interpreters, like it was before, but only for
the final binary. This limitation can be removed only by reverting commit
56305aa9b6 ("exec: Compute file based creds only once").
Link: https://github.com/linux-integrity/linux/issues/3
Fixes: 56305aa9b6 ("exec: Compute file based creds only once")
Cc: Serge E. Hallyn <serge@hallyn.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jann Horn <jannh@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCaOAhtRQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5bGkAP91Vptp6rJj3R0N0M338tzkVaeybA+V
fjOHnuB8AvF+FwD/XGLF+lcIFiB8GizXGf/OoyXJwYwciNU7hEdONh5dzQ0=
=euve
-----END PGP SIGNATURE-----
Merge tag 'integrity-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
"Just a couple of changes: crypto code cleanup and a IMA xattr bug fix"
* tag 'integrity-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: don't clear IMA_DIGSIG flag when setting or removing non-IMA xattr
lib/digsig: Use SHA-1 library instead of crypto_shash
integrity: Select CRYPTO from INTEGRITY_ASYMMETRIC_KEYS
A few minor updates/fixes for keys.
BR, Jarkko
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRE6pSOnaBC00OEHEIaerohdGur0gUCaOEv8gAKCRAaerohdGur
0q3BAPwLHEF9RDLyDbmUKMYXO2F7ckApZFW4zURYGAG9PpiE9wEA7daw0luUZGsB
u3767QRyhKrhJc0ad+QF95rj8GKuSgg=
=8Nni
-----END PGP SIGNATURE-----
Merge tag 'keys-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull keys updates from Jarkko Sakkinen:
"A few minor updates/fixes for keys"
* tag 'keys-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
security: keys: use menuconfig for KEYS symbol
KEYS: encrypted: Use SHA-256 library instead of crypto_shash
KEYS: trusted_tpm1: Move private functionality out of public header
KEYS: trusted_tpm1: Use SHA-1 library instead of crypto_shash
KEYS: trusted_tpm1: Compare HMAC values in constant time
Give the KEYS kconfig symbol and its associated symbols a separate menu
space under Security options by using "menuconfig" instead of "config".
This also makes it easier to find the security and LSM options.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Instead of the "sha256" crypto_shash, just use sha256(). Similarly,
instead of the "hmac(sha256)" crypto_shash, just use
hmac_sha256_usingrawkey(). This is simpler and faster.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCaN3daAAKCRBZ7Krx/gZQ
6zNWAP9kD6rOJRNqDgea4pibDPa47Tps/WM5tsDv3dsLliY29gEA6sveOWZ3guAj
4oY3ts/NtHLWXvhI7Vd/1mr2aTKEZQk=
=YNK+
-----END PGP SIGNATURE-----
Merge tag 'pull-f_path' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull file->f_path constification from Al Viro:
"Only one thing was modifying ->f_path of an opened file - acct(2).
Massaging that away and constifying a bunch of struct path * arguments
in functions that might be given &file->f_path ends up with the
situation where we can turn ->f_path into an anon union of const
struct path f_path and struct path __f_path, the latter modified only
in a few places in fs/{file_table,open,namei}.c, all for struct file
instances that are yet to be opened"
* tag 'pull-f_path' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (23 commits)
Have cc(1) catch attempts to modify ->f_path
kernel/acct.c: saner struct file treatment
configfs:get_target() - release path as soon as we grab configfs_item reference
apparmor/af_unix: constify struct path * arguments
ovl_is_real_file: constify realpath argument
ovl_sync_file(): constify path argument
ovl_lower_dir(): constify path argument
ovl_get_verity_digest(): constify path argument
ovl_validate_verity(): constify {meta,data}path arguments
ovl_ensure_verity_loaded(): constify datapath argument
ksmbd_vfs_set_init_posix_acl(): constify path argument
ksmbd_vfs_inherit_posix_acl(): constify path argument
ksmbd_vfs_kern_path_unlock(): constify path argument
ksmbd_vfs_path_lookup_locked(): root_share_path can be const struct path *
check_export(): constify path argument
export_operations->open(): constify path argument
rqst_exp_get_by_name(): constify path argument
nfs: constify path argument of __vfs_getattr()
bpf...d_path(): constify path argument
done_path_create(): constify path argument
...
Turn dentry->d_name into an anon union of const struct qsrt (d_name
itself) and a writable alias (__d_name). With constification of some
struct qstr * arguments of functions that get &dentry->d_name passed
to them, that ends up with all modifications provably done only in
fs/dcache.c (and a fairly small part of it).
Any new places doing modifications will be easy to find - grep for
__d_name will suffice.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCaNh6XAAKCRBZ7Krx/gZQ
6wIFAP9nJ9RIsTq2eiqb3YUTQsaFZNu7aqFWiHCFPeHVLzylPwEAgeoGrGdL8zNO
JqAuPPbQxN6Q6n79qAI/vfFvYQCsAQ0=
=88fF
-----END PGP SIGNATURE-----
Merge tag 'pull-qstr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull d_name audit update from Al Viro:
"Simplifying ->d_name audits, easy part.
Turn dentry->d_name into an anon union of const struct qsrt (d_name
itself) and a writable alias (__d_name).
With constification of some struct qstr * arguments of functions that
get &dentry->d_name passed to them, that ends up with all
modifications provably done only in fs/dcache.c (and a fairly small
part of it).
Any new places doing modifications will be easy to find - grep for
__d_name will suffice"
* tag 'pull-qstr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
make it easier to catch those who try to modify ->d_name
generic_ci_validate_strict_name(): constify name argument
afs_dir_search: constify qstr argument
afs_edit_dir_{add,remove}(): constify qstr argument
exfat_find(): constify qstr argument
security_dentry_init_security(): constify qstr argument
Currently when both IMA and EVM are in fix mode, the IMA signature will
be reset to IMA hash if a program first stores IMA signature in
security.ima and then writes/removes some other security xattr for the
file.
For example, on Fedora, after booting the kernel with "ima_appraise=fix
evm=fix ima_policy=appraise_tcb" and installing rpm-plugin-ima,
installing/reinstalling a package will not make good reference IMA
signature generated. Instead IMA hash is generated,
# getfattr -m - -d -e hex /usr/bin/bash
# file: usr/bin/bash
security.ima=0x0404...
This happens because when setting security.selinux, the IMA_DIGSIG flag
that had been set early was cleared. As a result, IMA hash is generated
when the file is closed.
Similarly, IMA signature can be cleared on file close after removing
security xattr like security.evm or setting/removing ACL.
Prevent replacing the IMA file signature with a file hash, by preventing
the IMA_DIGSIG flag from being reset.
Here's a minimal C reproducer which sets security.selinux as the last
step which can also replaced by removing security.evm or setting ACL,
#include <stdio.h>
#include <sys/xattr.h>
#include <fcntl.h>
#include <unistd.h>
#include <string.h>
#include <stdlib.h>
int main() {
const char* file_path = "/usr/sbin/test_binary";
const char* hex_string = "030204d33204490066306402304";
int length = strlen(hex_string);
char* ima_attr_value;
int fd;
fd = open(file_path, O_WRONLY|O_CREAT|O_EXCL, 0644);
if (fd == -1) {
perror("Error opening file");
return 1;
}
ima_attr_value = (char*)malloc(length / 2 );
for (int i = 0, j = 0; i < length; i += 2, j++) {
sscanf(hex_string + i, "%2hhx", &ima_attr_value[j]);
}
if (fsetxattr(fd, "security.ima", ima_attr_value, length/2, 0) == -1) {
perror("Error setting extended attribute");
close(fd);
return 1;
}
const char* selinux_value= "system_u:object_r:bin_t:s0";
if (fsetxattr(fd, "security.selinux", selinux_value, strlen(selinux_value), 0) == -1) {
perror("Error setting extended attribute");
close(fd);
return 1;
}
close(fd);
return 0;
}
Signed-off-by: Coiby Xu <coxu@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Select CRYPTO from INTEGRITY_ASYMMETRIC_KEYS, since
INTEGRITY_ASYMMETRIC_KEYS selects several options that depend on CRYPTO.
This unblocks the removal of the CRYPTO selection from SIGNATURE.
SIGNATURE (lib/digsig.c) itself will no longer need CRYPTO, but
INTEGRITY_ASYMMETRIC_KEYS was depending on it indirectly via the chain
SIGNATURE => INTEGRITY_SIGNATURE => INTEGRITY_ASYMMETRIC_KEYS.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----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=jK6L
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20250926' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
- Move the management of the LSM BPF security blobs into the framework
In order to enable multiple LSMs we need to allocate and free the
various security blobs in the LSM framework and not the individual
LSMs as they would end up stepping all over each other.
- Leverage the lsm_bdev_alloc() helper in lsm_bdev_alloc()
Make better use of our existing helper functions to reduce some code
duplication.
- Update the Rust cred code to use 'sync::aref'
Part of a larger effort to move the Rust code over to the 'sync'
module.
- Make CONFIG_LSM dependent on CONFIG_SECURITY
As the CONFIG_LSM Kconfig setting is an ordered list of the LSMs to
enable a boot, it obviously doesn't make much sense to enable this
when CONFIG_SECURITY is disabled.
- Update the LSM and CREDENTIALS sections in MAINTAINERS with Rusty
bits
Add the Rust helper files to the associated LSM and CREDENTIALS
entries int the MAINTAINERS file. We're trying to improve the
communication between the two groups and making sure we're all aware
of what is going on via cross-posting to the relevant lists is a good
way to start.
* tag 'lsm-pr-20250926' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lsm: CONFIG_LSM can depend on CONFIG_SECURITY
MAINTAINERS: add the associated Rust helper to the CREDENTIALS section
MAINTAINERS: add the associated Rust helper to the LSM section
rust,cred: update AlwaysRefCounted import to sync::aref
security: use umax() to improve code
lsm,selinux: Add LSM blob support for BPF objects
lsm: use lsm_blob_alloc() in lsm_bdev_alloc()
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAmjWq78UHHBhdWxAcGF1
bC1tb29yZS5jb20ACgkQ6iDy2pc3iXMgnw/9Hc3ZGataAiWXNqRiMxVGB39rHidN
zKVOIqAG4NT9J0koIt2FEI6LmI6KZ8JRpHAygLdb5nVHTmpOhDYIvZwIMU6Y91UF
1Q041TQXfcv8Wc1cCab1Sj+28LAhUoFap2QesnoudV+5xpl0DhLBcDDXEneN90bp
zrXS3Yq6wg+QCtY9CkUHuKjHC0tAZI56x9XO2nrzgAJgCzBT2F7WOlucMVA+40OB
9pWoL5PZ+MF3/y7dtMqZV/vqM45mwj9jQ6UIi6T/QvL5XoH8bmi97xjVPtb3GZG6
UWDrWJIUam7oRjYootHP59+6QjNquJkScjuLqsx82pUwrhWKJHLSKrOCagH0eWAj
liFfqAwHznQL6IkHwtwdfchlnf4/LCkLeB510kK/Asr4723E9/DdOReB+lPjmwIo
ibuZYfmVoETSjRv2LVva9hqGdT3aZezpx2qLnItc8WJgmQ3pSy1nb5iY5wS3S3/7
aMArggG+3k3YOoVBmQjWjWNrDH9ky/efAxxTc6N6fmF7EqUaymWSxixYMM/hsoCQ
JjVmUp/fOOAKweNnEHMlYy/aKKMCpB3hgJyV6GPNzTOvbG/Trz/QP1BH2xsiHsvg
iWvHc+6L6euOmW8laaxoKUnnfweuUaXWtDLxE+aLqGyoX2XVMXSmD45hZ2QmsIyo
acQEHZ38V4M3gqI=
=eLHt
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20250926' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
- Support per-file labeling for functionfs
Both genfscon and user defined labeling methods are supported. This
should help users who want to provide separation between the control
endpoint file, "ep0", and other endpoints.
- Remove our use of get_zeroed_page() in sel_read_bool()
Update sel_read_bool() to use a four byte stack buffer instead of a
memory page fetched via get_zeroed_page(), and fix a memory in the
process.
Needless to say we should have done this a long time ago, but it was
in a very old chunk of code that "just worked" and I don't think
anyone had taken a real look at it in many years.
- Better use of the netdev skb/sock helper functions
Convert a sk_to_full_sk(skb->sk) into a skb_to_full_sk(skb) call.
- Remove some old, dead, and/or redundant code
* tag 'selinux-pr-20250926' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: enable per-file labeling for functionfs
selinux: fix sel_read_bool() allocation and error handling
selinux: Remove redundant __GFP_NOWARN
selinux: use a consistent method to get full socket from skb
selinux: Remove unused function selinux_policycap_netif_wildcard()
-----BEGIN PGP SIGNATURE-----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=iQal
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20250926' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
- Proper audit support for multiple LSMs
As the audit subsystem predated the work to enable multiple LSMs,
some additional work was needed to support logging the different LSM
labels for the subjects/tasks and objects on the system. Casey's
patches add new auxillary records for subjects and objects that
convey the additional labels.
- Ensure fanotify audit events are always generated
Generally speaking security relevant subsystems always generate audit
events, unless explicitly ignored. However, up to this point fanotify
events had been ignored by default, but starting with this pull
request fanotify follows convention and generates audit events by
default.
- Replace an instance of strcpy() with strscpy()
- Minor indentation, style, and comment fixes
* tag 'audit-pr-20250926' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: fix skb leak when audit rate limit is exceeded
audit: init ab->skb_list earlier in audit_buffer_alloc()
audit: add record for multiple object contexts
audit: add record for multiple task security contexts
lsm: security_lsmblob_to_secctx module selection
audit: create audit_stamp structure
audit: add a missing tab
audit: record fanotify event regardless of presence of rules
audit: fix typo in auditfilter.c comment
audit: Replace deprecated strcpy() with strscpy()
audit: fix indentation in audit_log_exit()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaNZgMQAKCRCRxhvAZXjc
ornXAP954dZjz+OJw6lJLCf0j9TXJOczGHvK3oW5ZD9KnqtTdwEA7p1A6WMOKJyl
8VtTgCS0yNt8QlznUnsSDfVm0jXVGAY=
=tUXG
-----END PGP SIGNATURE-----
Merge tag 'kernel-6.18-rc1.clone3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull copy_process updates from Christian Brauner:
"This contains the changes to enable support for clone3() on nios2
which apparently is still a thing.
The more exciting part of this is that it cleans up the inconsistency
in how the 64-bit flag argument is passed from copy_process() into the
various other copy_*() helpers"
[ Fixed up rv ltl_monitor 32-bit support as per Sasha Levin in the merge ]
* tag 'kernel-6.18-rc1.clone3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
nios2: implement architecture-specific portion of sys_clone3
arch: copy_thread: pass clone_flags as u64
copy_process: pass clone_flags as u64 across calltree
copy_sighand: Handle architectures where sizeof(unsigned long) < sizeof(u64)
Move functionality used only by trusted_tpm1.c out of the public header
<keys/trusted_tpm.h>. Specifically, change the exported functions into
static functions, since they are not used outside trusted_tpm1.c, and
move various other definitions and inline functions to trusted_tpm1.c.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Use the SHA-1 and HMAC-SHA1 library functions instead of crypto_shash.
This is simpler and faster.
Replace the selection of CRYPTO, CRYPTO_HMAC, and CRYPTO_SHA1 with
CRYPTO_LIB_SHA1 and CRYPTO_LIB_UTILS. The latter is needed for
crypto_memneq() which was previously being pulled in via CRYPTO.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
To prevent timing attacks, HMAC value comparison needs to be constant
time. Replace the memcmp() with the correct function, crypto_memneq().
[For the Fixes commit I used the commit that introduced the memcmp().
It predates the introduction of crypto_memneq(), but it was still a bug
at the time even though a helper function didn't exist yet.]
Fixes: d00a1c72f7 ("keys: add new trusted key-type")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Provides an abstraction for C bitmap API and bitops operations.
This commit enables a Rust implementation of an Android Binder
data structure from commit 15d9da3f81 ("binder: use bitmap for faster
descriptor lookup"), which can be found in drivers/android/dbitmap.h.
It is a step towards upstreaming the Rust port of Android Binder driver.
We follow the C Bitmap API closely in naming and semantics, with
a few differences that take advantage of Rust language facilities
and idioms. The main types are `BitmapVec` for owned bitmaps and
`Bitmap` for references to C bitmaps.
* We leverage Rust type system guarantees as follows:
* all (non-atomic) mutating operations require a &mut reference which
amounts to exclusive access.
* the `BitmapVec` type implements Send. This enables transferring
ownership between threads and is needed for Binder.
* the `BitmapVec` type implements Sync, which enables passing shared
references &Bitmap between threads. Atomic operations can be
used to safely modify from multiple threads (interior
mutability), though without ordering guarantees.
* The Rust API uses `{set,clear}_bit` vs `{set,clear}_bit_atomic` as
names for clarity, which differs from the C naming convention
`set_bit` for atomic vs `__set_bit` for non-atomic.
* we include enough operations for the API to be useful. Not all
operations are exposed yet in order to avoid dead code. The missing
ones can be added later.
* We take a fine-grained approach to safety:
* Low-level bit-ops get a safe API with bounds checks. Calling with
an out-of-bounds arguments to {set,clear}_bit becomes a no-op and
get logged as errors.
* We also introduce a RUST_BITMAP_HARDENED config, which
causes invocations with out-of-bounds arguments to panic.
* methods correspond to find_* C methods tolerate out-of-bounds
since the C implementation does. Also here, out-of-bounds
arguments are logged as errors, or panic in RUST_BITMAP_HARDENED
mode.
* We add a way to "borrow" bitmaps from C in Rust, to make C bitmaps
that were allocated in C directly usable in Rust code (`Bitmap`).
* the Rust API is optimized to represent the bitmap inline if it would
fit into a pointer. This saves allocations which is
relevant in the Binder use case.
The underlying C bitmap is *not* exposed for raw access in Rust. Doing so
would permit bypassing the Rust API and lose static guarantees.
An alternative route of vendoring an existing Rust bitmap package was
considered but suboptimal overall. Reusing the C implementation is
preferable for a basic data structure like bitmaps. It enables Rust
code to be a lot more similar and predictable with respect to C code
that uses the same data structures and enables the use of code that
has been tried-and-tested in the kernel, with the same performance
characteristics whenever possible.
We use the `usize` type for sizes and indices into the bitmap,
because Rust generally always uses that type for indices and lengths
and it will be more convenient if the API accepts that type. This means
that we need to perform some casts to/from u32 and usize, since the C
headers use unsigned int instead of size_t/unsigned long for these
numbers in some places.
Adds new MAINTAINERS section BITMAP API [RUST].
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Suggested-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Burak Emir <bqe@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
unix_sk(sock)->path should never be modified, least of all by LSM...
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Nothing outside of fs/dcache.c has any business modifying
dentry names; passing &dentry->d_name as an argument should
have that argument declared as a const pointer.
Acked-by: Casey Schaufler <casey@schaufler-ca.com> # smack part
Acked-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When CONFIG_SECURITY is not set, CONFIG_LSM (builtin_lsm_order) does
not need to be visible and settable since builtin_lsm_order is defined in
security.o, which is only built when CONFIG_SECURITY=y.
So make CONFIG_LSM depend on CONFIG_SECURITY.
Fixes: 13e735c0e9 ("LSM: Introduce CONFIG_LSM")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
[PM: subj tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch adds support for genfscon per-file labeling of functionfs
files as well as support for userspace to apply labels after new
functionfs endpoints are created.
This allows for separate labels and therefore access control on a
per-endpoint basis. An example use case would be for the default
endpoint EP0 used as a restricted control endpoint, and additional
usb endpoints to be used by other more permissive domains.
It should be noted that if there are multiple functionfs mounts on a
system, genfs file labels will apply to all mounts, and therefore will not
likely be as useful as the userspace relabeling portion of this patch -
the addition to selinux_is_genfs_special_handling().
This patch introduces the functionfs_seclabel policycap to maintain
existing functionfs genfscon behavior unless explicitly enabled.
Signed-off-by: Neill Kapron <nkapron@google.com>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
[PM: trim changelog, apply boolean logic fixup]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Switch sel_read_bool() from using get_zeroed_page() and free_page()
to a stack-allocated buffer. This also fixes a memory leak in the
error path when security_get_bool_value() returns an error.
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
With the introduction of clone3 in commit 7f192e3cd3 ("fork: add
clone3") the effective bit width of clone_flags on all architectures was
increased from 32-bit to 64-bit, with a new type of u64 for the flags.
However, for most consumers of clone_flags the interface was not
changed from the previous type of unsigned long.
While this works fine as long as none of the new 64-bit flag bits
(CLONE_CLEAR_SIGHAND and CLONE_INTO_CGROUP) are evaluated, this is still
undesirable in terms of the principle of least surprise.
Thus, this commit fixes all relevant interfaces of callees to
sys_clone3/copy_process (excluding the architecture-specific
copy_thread) to consistently pass clone_flags as u64, so that
no truncation to 32-bit integers occurs on 32-bit architectures.
Signed-off-by: Simon Schuster <schuster.simon@siemens-energy.com>
Link: https://lore.kernel.org/20250901-nios2-implement-clone3-v2-2-53fcf5577d57@siemens-energy.com
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Create a new audit record AUDIT_MAC_OBJ_CONTEXTS.
An example of the MAC_OBJ_CONTEXTS record is:
type=MAC_OBJ_CONTEXTS
msg=audit(1601152467.009:1050):
obj_selinux=unconfined_u:object_r:user_home_t:s0
When an audit event includes a AUDIT_MAC_OBJ_CONTEXTS record
the "obj=" field in other records in the event will be "obj=?".
An AUDIT_MAC_OBJ_CONTEXTS record is supplied when the system has
multiple security modules that may make access decisions based
on an object security context.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subj tweak, audit example readability indents]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Replace the single skb pointer in an audit_buffer with a list of
skb pointers. Add the audit_stamp information to the audit_buffer as
there's no guarantee that there will be an audit_context containing
the stamp associated with the event. At audit_log_end() time create
auxiliary records as have been added to the list. Functions are
created to manage the skb list in the audit_buffer.
Create a new audit record AUDIT_MAC_TASK_CONTEXTS.
An example of the MAC_TASK_CONTEXTS record is:
type=MAC_TASK_CONTEXTS
msg=audit(1600880931.832:113)
subj_apparmor=unconfined
subj_smack=_
When an audit event includes a AUDIT_MAC_TASK_CONTEXTS record the
"subj=" field in other records in the event will be "subj=?".
An AUDIT_MAC_TASK_CONTEXTS record is supplied when the system has
multiple security modules that may make access decisions based on a
subject security context.
Refactor audit_log_task_context(), creating a new audit_log_subj_ctx().
This is used in netlabel auditing to provide multiple subject security
contexts as necessary.
Suggested-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subj tweak, audit example readability indents]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Add a parameter lsmid to security_lsmblob_to_secctx() to identify which
of the security modules that may be active should provide the security
context. If the value of lsmid is LSM_ID_UNDEF the first LSM providing
a hook is used. security_secid_to_secctx() is unchanged, and will
always report the first LSM providing a hook.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subj tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Use umax() to reduce the code in update_mmap_min_addr() and improve its
readability.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
[PM: subj line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Commit 16f5dfbc85 ("gfp: include __GFP_NOWARN in GFP_NOWAIT")
made GFP_NOWAIT implicitly include __GFP_NOWARN.
Therefore, explicit __GFP_NOWARN combined with GFP_NOWAIT
(e.g., `GFP_NOWAIT | __GFP_NOWARN`) is now redundant. Let's clean
up these redundant flags across subsystems.
No functional changes.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
[PM: fixed horizontal spacing / alignment, line wraps]
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch introduces LSM blob support for BPF maps, programs, and
tokens to enable LSM stacking and multiplexing of LSM modules that
govern BPF objects. Additionally, the existing BPF hooks used by
SELinux have been updated to utilize the new blob infrastructure,
removing the assumption of exclusive ownership of the security
pointer.
Signed-off-by: Blaise Boscaccy <bboscaccy@linux.microsoft.com>
[PM: dropped local variable init, style fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Convert the lsm_bdev_alloc() function to use the lsm_blob_alloc() helper
like all of the other LSM security blob allocators.
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
In order to maintain code consistency and readability,
skb_to_full_sk() is used to get full socket from skb.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This is unused since commit a3d3043ef2 ("selinux: get netif_wildcard
policycap from policy instead of cache").
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
- improve debug printing
- carry mediation check on label (optimization)
- improve ability for compiler to optimize __begin_current_label_crit_section
- transition for a linked list of rulesets to a vector of rulesets
- don't hardcode profile signal, allow it to be set by policy
- ability to mediate caps via the state machine instead of lut
- Add Ubuntu af_unix mediation, put it behind new v9 abi
+ Cleanups
- fix typos and spelling errors
- cleanup kernel doc and code inconsistencies
- remove redundant checks/code
- remove unused variables
- Use str_yes_no() helper function
- mark tables static where appropriate
- make all generated string array headers const char *const
- refactor to doc semantics of file_perm checks
- replace macro calls to network/socket fns with explicit calls
- refactor/cleanup socket mediation code preparing for finer grained
mediation of different network families
- several updates to kernel doc comments
+ Bug fixes
- apparmor: Fix incorrect profile->signal range check
- idmap mount fixes
- policy unpack unaligned access fixes
- kfree_sensitive() where appropriate
- fix oops when freeing policy
- fix conflicting attachment resolution
- fix exec table look-ups when stacking isn't first
- fix exec auditing
- mitigate userspace generating overly large xtables
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE7cSDD705q2rFEEf7BS82cBjVw9gFAmiQmakACgkQBS82cBjV
w9jvKBAAn/HblSPo112ycW/yjeonkyiCY56LvyeU1YWQ8m370xPqM3yK2SHcj2i1
we1mx5beDxbH5xn7c6w0EtyoHP7FNhyHp7neG8/WaJ1JG4uxv9HvrDmEJeQEJn/3
5AP1q2dZF9NwnKBfB5zjwZXBJzncWtYBoLUjYMbehWlQjufT2yElyM8YZZN8ziLE
M5ILVX6UMGpBH/zuX5kN2idLcubnv5MvLo2IEt+/nGLPbed44w+mZTM5WOTbzPNq
w8axyNdhGt9kcSGwWuM+48T4oLfwagoxIZ3RXSQ4eExk6I8ZaFXua8nknC9wENN4
9vkzDSWAupQ+o1bLKVNMVkqvBIIqmvEWvwket/hiyxs3Y5PDckRqOgQ/4Wbmgp9B
KhLXxzIrF9PXkZ/rpMzloxnvDtMwoSScDShhW4TCRCmpDo/GwPwoPIpgbnc3kTq0
poomca9KZ7YEnX/90Bh92Duo5OBDOHYlbWVE7EWX01htcxExQJt47JK48C25cY5p
/cVDVepoz7EnKjB7mm9k6K1gYGvDeu3W1whRZNEK74AQJ7p+CrBoU+WjeMmZqP5V
s47cLF17hbnw4ZvfsxQDkPgSOP1kuJIVlwFV2lPQk5hDcT6V0kZtqUzczKJSqeJb
CGOkKvM7ao/7Cn8pmDNG1ZuPl/HuJ6wjlxt7SVt4/3rzLFzwglo=
=Djjn
-----END PGP SIGNATURE-----
Merge tag 'apparmor-pr-2025-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
Pull apparmor updates from John Johansen:
"This has one major feature, it pulls in a cleaned up version of
af_unix mediation that Ubuntu has been carrying for years. It is
placed behind a new abi to ensure that it does cause policy
regressions. With pulling in the af_unix mediation there have been
cleanups and some refactoring of network socket mediation. This
accounts for the majority of the changes in the diff.
In addition there are a few improvements providing minor code
optimizations. several code cleanups, and bug fixes.
Features:
- improve debug printing
- carry mediation check on label (optimization)
- improve ability for compiler to optimize
__begin_current_label_crit_section
- transition for a linked list of rulesets to a vector of rulesets
- don't hardcode profile signal, allow it to be set by policy
- ability to mediate caps via the state machine instead of lut
- Add Ubuntu af_unix mediation, put it behind new v9 abi
Cleanups:
- fix typos and spelling errors
- cleanup kernel doc and code inconsistencies
- remove redundant checks/code
- remove unused variables
- Use str_yes_no() helper function
- mark tables static where appropriate
- make all generated string array headers const char *const
- refactor to doc semantics of file_perm checks
- replace macro calls to network/socket fns with explicit calls
- refactor/cleanup socket mediation code preparing for finer grained
mediation of different network families
- several updates to kernel doc comments
Bug fixes:
- fix incorrect profile->signal range check
- idmap mount fixes
- policy unpack unaligned access fixes
- kfree_sensitive() where appropriate
- fix oops when freeing policy
- fix conflicting attachment resolution
- fix exec table look-ups when stacking isn't first
- fix exec auditing
- mitigate userspace generating overly large xtables"
* tag 'apparmor-pr-2025-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor: (60 commits)
apparmor: fix: oops when trying to free null ruleset
apparmor: fix Regression on linux-next (next-20250721)
apparmor: fix test error: WARNING in apparmor_unix_stream_connect
apparmor: Remove the unused variable rules
apparmor: fix: accept2 being specifie even when permission table is presnt
apparmor: transition from a list of rules to a vector of rules
apparmor: fix documentation mismatches in val_mask_to_str and socket functions
apparmor: remove redundant perms.allow MAY_EXEC bitflag set
apparmor: fix kernel doc warnings for kernel test robot
apparmor: Fix unaligned memory accesses in KUnit test
apparmor: Fix 8-byte alignment for initial dfa blob streams
apparmor: shift uid when mediating af_unix in userns
apparmor: shift ouid when mediating hard links in userns
apparmor: make sure unix socket labeling is correctly updated.
apparmor: fix regression in fs based unix sockets when using old abi
apparmor: fix AA_DEBUG_LABEL()
apparmor: fix af_unix auditing to include all address information
apparmor: Remove use of the double lock
apparmor: update kernel doc comments for xxx_label_crit_section
apparmor: make __begin_current_label_crit_section() indicate whether put is needed
...
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCaItL7xQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5TduAQDu7W14clgQiJNwYo2hN5cEnfKZVkRI
6PJGyxV+g+cMOQEA4Aepo2EL86kQJH33iAUmzi0bvyQl4cPTuKqpw5CgjQg=
=eGra
-----END PGP SIGNATURE-----
Merge tag 'integrity-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity update from Mimi Zohar:
"A single commit to permit disabling IMA from the boot command line for
just the kdump kernel.
The exception itself sort of makes sense. My concern is that
exceptions do not remain as exceptions, but somehow morph to become
the norm"
* tag 'integrity-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: add a knob ima= to allow disabling IMA in kdump kernel
This branch contains two patches:
cdd73b1666 uapi: fix broken link in linux/capability.h
This updates documentation in capability.h.
337490f000 exec: Correct the permission check for unsafe exec
This is not a trivial patch, but fixes a real problem where during
exec, different effective and real credentials were assumed to mean
changed credentials, making it impossible in the no-new-privs case
to keep different uid and euid.
These are available at:
git://git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux.git #caps-pr-20250729
on top of commit 19272b37aa (tag: v6.16-rc1)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEqb0/8XByttt4D8+UNXDaFycKziQFAmiJHCIACgkQNXDaFycK
ziRz0QgAqDCdWBrwS/icfXnkV+fcB8J/p/JP+5DO4stn9vV97j+RC3WLc/Wlj5tl
jLbGGd8eWnCYyTaUHlhE81Qw4b5iQKkd6umGSIBoQVu00YiJ3pLaYsIkEaEMDIkG
2qS5oNyDEFho8g05++mmTfGMeFQJ4mUEwUmcnsCcTH3bkvcVinlZwP6Lfitmt0lH
yS0xeMf+gBINou1yTPLdMCCv8LAac2qBcMWhWk4NBEFZJoM0S/Rg5RhdiYYNYYAj
fi96cTG7qbv80a3M6e/7ta4hU+XdU6JuzQRQJeZstFj2oRfTx2CRR1Wgbus4KdlP
x/5Sc3bT/ovdPwDc/5HTeFXAlqIqmQ==
=uKJr
-----END PGP SIGNATURE-----
commit cdd73b1666
Author: Ariel Otilibili <ariel.otilibili-anieli@eurecom.fr>
Date: Wed Jul 2 12:00:21 2025 +0200
uapi: fix broken link in linux/capability.h
The link to the libcap library is outdated. Instead, use a link to the
libcap2 library.
As well, give the complete reference of the POSIX compliance.
Signed-off-by: Ariel Otilibili <ariel.otilibili-anieli@eurecom.fr>
Acked-by: Andrew G. Morgan <morgan@kernel.org>
Reviewed-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Serge Hallyn <sergeh@kernel.org>
diff --git a/include/uapi/linux/capability.h b/include/uapi/linux/capability.h
index 2e21b5594f81..ea5a0899ecf0 100644
--- a/include/uapi/linux/capability.h
+++ b/include/uapi/linux/capability.h
@@ -6,9 +6,10 @@
* Alexander Kjeldaas <astor@guardian.no>
* with help from Aleph1, Roland Buresund and Andrew Main.
*
- * See here for the libcap library ("POSIX draft" compliance):
+ * See here for the libcap2 library (compliant with Section 25 of
+ * the withdrawn POSIX 1003.1e Draft 17):
*
- * ftp://www.kernel.org/pub/linux/libs/security/linux-privs/kernel-2.6/
+ * https://www.kernel.org/pub/linux/libs/security/linux-privs/libcap2/
*/
#ifndef _UAPI_LINUX_CAPABILITY_H
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEqb0/8XByttt4D8+UNXDaFycKziQFAmiJHhoACgkQNXDaFycK
ziQXVQgAn7931CkRAKZXcukfluPWFsanPGoBKqT+UFVjjUenDtd/GXZQwahRwweS
k7zDDa/JE59yMHKNenslLgV1PYb3/ZtBMDq+8/LXQ/JMkaZYpNhPPo0lUa70s3pM
EdY4qbB+aNWeAoHTltRkRkbDHWak3sNjlRyavQj2n7uCOXdSHp4yAVOgiMqxAUX8
o/V6M6dHA2iN0HEKV+Mp5vHY+9TTFv8dTygNxb1995n1QfHT/AFOTOO598FHkYxA
aSR8kSpdULdGExk+7Q2NsJoX38zsZIaaI75MQw9Tz5iRkYFZG3hcJVYNbZyT10s+
NwteAaDfTqTz78QB3PcG794CQls8vQ==
=yLTV
-----END PGP SIGNATURE-----
Merge tag 'caps-pr-20250729' of git://git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux
Pull capabilities update from Serge Hallyn:
- Fix broken link in documentation in capability.h
- Correct the permission check for unsafe exec
During exec, different effective and real credentials were assumed to
mean changed credentials, making it impossible in the no-new-privs
case to keep different uid and euid
* tag 'caps-pr-20250729' of git://git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux:
uapi: fix broken link in linux/capability.h
exec: Correct the permission check for unsafe exec
-----BEGIN PGP SIGNATURE-----
iIcEABYIAC8WIQQzmBmZPBN6m/hUJmnyomI6a/yO7QUCaIgqhBEcd3VmYW5Aa2Vy
bmVsLm9yZwAKCRDyomI6a/yO7RS6AQDikpH4iYfC5PNOcPRvYrl85SvZdDVdJoyD
0r+DyNddqQEA5iWbIo18rz7usj62uqZd5yFXLmUNfgX+/SvpLLDeXQ4=
=B34A
-----END PGP SIGNATURE-----
Merge tag 'ipe-pr-20250728' of git://git.kernel.org/pub/scm/linux/kernel/git/wufan/ipe
Pull ipe update from Fan Wu:
"A single commit from Eric Biggers to simplify the IPE (Integrity
Policy Enforcement) policy audit with the SHA-256 library API"
* tag 'ipe-pr-20250728' of git://git.kernel.org/pub/scm/linux/kernel/git/wufan/ipe:
ipe: use SHA-256 library API instead of crypto_shash API
commit 88fec3526e ("apparmor: make sure unix socket labeling is correctly updated.")
added the use of security_sk_alloc() which ensures the sk label is
initialized.
This means that the AA_BUG in apparmor_unix_stream_connect() is no
longer correct, because while the sk is still not being initialized
by going through post_create, it is now initialize in sk_alloc().
Remove the now invalid check.
Reported-by: syzbot+cd38ee04bcb3866b0c6d@syzkaller.appspotmail.com
Fixes: 88fec3526e ("apparmor: make sure unix socket labeling is correctly updated.")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Variable rules is not effectively used, so delete it.
security/apparmor/lsm.c:182:23: warning: variable ‘rules’ set but not used.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=22942
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
- CONFIG_HZ changes to move the base_slice from 10ms to 1ms
- Patchset to move some of the mutex handling to lock guard
- Expose secvars relevant to the key management mode
- Misc cleanups and fixes
Thanks to: Ankit Chauhan, Christophe Leroy, Donet Tom, Gautam Menghani, Haren
Myneni, Johan Korsnes, Madadi Vineeth Reddy, Paul Mackerras, Shrikanth Hegde,
Srish Srinivasan, Thomas Fourier, Thomas Huth, Thomas Weißschuh, Souradeep,
Amit Machhiwal, R Nageswara Sastry, Venkat Rao Bagalkote, Andrew Donnellan,
Greg Kroah-Hartman, Mimi Zohar, Mukesh Kumar Chaurasiya, Nayna Jain, Ritesh
Harjani (IBM), Sourabh Jain, Srikar Dronamraju, Stefan Berger, Tyrel Datwyler,
Kowshik Jois
-----BEGIN PGP SIGNATURE-----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=i2VP
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan:
- CONFIG_HZ changes to move the base_slice from 10ms to 1ms
- Patchset to move some of the mutex handling to lock guard
- Expose secvars relevant to the key management mode
- Misc cleanups and fixes
Thanks to Ankit Chauhan, Christophe Leroy, Donet Tom, Gautam Menghani,
Haren Myneni, Johan Korsnes, Madadi Vineeth Reddy, Paul Mackerras,
Shrikanth Hegde, Srish Srinivasan, Thomas Fourier, Thomas Huth, Thomas
Weißschuh, Souradeep, Amit Machhiwal, R Nageswara Sastry, Venkat Rao
Bagalkote, Andrew Donnellan, Greg Kroah-Hartman, Mimi Zohar, Mukesh
Kumar Chaurasiya, Nayna Jain, Ritesh Harjani (IBM), Sourabh Jain, Srikar
Dronamraju, Stefan Berger, Tyrel Datwyler, and Kowshik Jois.
* tag 'powerpc-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (23 commits)
arch/powerpc: Remove .interp section in vmlinux
powerpc: Drop GPL boilerplate text with obsolete FSF address
powerpc: Don't use %pK through printk
arch: powerpc: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX
misc: ocxl: Replace scnprintf() with sysfs_emit() in sysfs show functions
integrity/platform_certs: Allow loading of keys in the static key management mode
powerpc/secvar: Expose secvars relevant to the key management mode
powerpc/pseries: Correct secvar format representation for static key management
(powerpc/512) Fix possible `dma_unmap_single()` on uninitialized pointer
powerpc: floppy: Add missing checks after DMA map
book3s64/radix : Optimize vmemmap start alignment
book3s64/radix : Handle error conditions properly in radix_vmemmap_populate
powerpc/pseries/dlpar: Search DRC index from ibm,drc-indexes for IO add
KVM: PPC: Book3S HV: Add H_VIRT mapping for tracing exits
powerpc: sysdev: use lock guard for mutex
powerpc: powernv: ocxl: use lock guard for mutex
powerpc: book3s: vas: use lock guard for mutex
powerpc: fadump: use lock guard for mutex
powerpc: rtas: use lock guard for mutex
powerpc: eeh: use lock guard for mutex
...
-----BEGIN PGP SIGNATURE-----
iIYEABYKAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCaINQ2hAcbWljQGRpZ2lr
b2QubmV0AAoJEOXj0OiMgvbS8DcA/RvnXD7NcvINU94pkY6w+SxtdhsIe/w7EcGF
LJdwxrKQAP0WpMNTfKdzfe6ub7qE+AkZYhagKAuMCloS1qE35nZgDg==
=WKRS
-----END PGP SIGNATURE-----
Merge tag 'landlock-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock update from Mickaël Salaün:
"Fix test issues, improve build compatibility, and add new tests"
* tag 'landlock-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
landlock: Fix cosmetic change
samples/landlock: Fix building on musl libc
landlock: Fix warning from KUnit tests
selftests/landlock: Add test to check rule tied to covered mount point
selftests/landlock: Fix build of audit_test
selftests/landlock: Fix readlink check
audit_policy() does not support any other algorithm, so the crypto_shash
abstraction provides no value. Just use the SHA-256 library API
instead, which is much simpler and easier to use.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Fan Wu <wufan@kernel.org>
-----BEGIN PGP SIGNATURE-----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=M55j
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20250725' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
- Introduce the concept of a SELinux "neveraudit" type which prevents
all auditing of the given type/domain.
Taken by itself, the benefit of marking a SELinux domain with the
"neveraudit" tag is likely not very interesting, especially given the
significant overlap with the "dontaudit" tag.
However, given that the "neveraudit" tag applies to *all* auditing of
the tagged domain, we can do some fairly interesting optimizations
when a SELinux domain is marked as both "permissive" and "dontaudit"
(think of the unconfined_t domain).
While this pull request includes optimized inode permission and
getattr hooks, these optimizations require SELinux policy changes,
therefore the improvements may not be visible on standard downstream
Linux distos for a period of time.
- Continue the deprecation process of /sys/fs/selinux/user.
After removing the associated userspace code in 2020, we marked the
/sys/fs/selinux/user interface as deprecated in Linux v6.13 with
pr_warn() and the usual documention update.
This adds a five second sleep after the pr_warn(), following a
previous deprecation process pattern that has worked well for us in
the past in helping identify any existing users that we haven't yet
reached.
- Add a __GFP_NOWARN flag to our initial hash table allocation.
Fuzzers such a syzbot often attempt abnormally large SELinux policy
loads, which the SELinux code gracefully handles by checking for
allocation failures, but not before the allocator emits a warning
which causes the automated fuzzing to flag this as an error and
report it to the list. While we want to continue to support the work
done by the fuzzing teams, we want to focus on proper issues and not
an error case that is already handled safely. Add a NOWARN flag to
quiet the allocator and prevent syzbot from tripping on this again.
- Remove some unnecessary selinuxfs cleanup code, courtesy of Al.
- Update the SELinux in-kernel documentation with pointers to
additional information.
* tag 'selinux-pr-20250725' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: don't bother with selinuxfs_info_free() on failures
selinux: add __GFP_NOWARN to hashtab_init() allocations
selinux: optimize selinux_inode_getattr/permission() based on neveraudit|permissive
selinux: introduce neveraudit types
documentation: add links to SELinux resources
selinux: add a 5 second sleep to /sys/fs/selinux/user
-----BEGIN PGP SIGNATURE-----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=5isD
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20250725' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
- Add Nicolas Bouchinet and Xiu Jianfeng as Lockdown maintainers
The Lockdown LSM has been without a dedicated mantainer since its
original acceptance upstream, and it has suffered as a result.
Thankfully we have two new volunteers who together I believe have the
background and desire to help ensure Lockdown is properly supported.
- Remove the unused cap_mmap_file() declaration
* tag 'lsm-pr-20250725' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
MAINTAINERS: Add Xiu and myself as Lockdown maintainers
security: Remove unused declaration cap_mmap_file()
lsm: trivial comment fix
Convert fsverity and apparmor to use the SHA-2 library functions
instead of crypto_shash. This is simpler and also slightly faster.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaIZ+MhQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK6LlAP42XrHo9hMqCnVs7uCtDVOk2kBUB7ml
m7rkVqQLiEbgAAEAiFvQYPjiaUedTi+bH45+qP/O/LxY7y5laIby7QKa1wc=
=X4Xs
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-conversions-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library conversions from Eric Biggers:
"Convert fsverity and apparmor to use the SHA-2 library functions
instead of crypto_shash. This is simpler and also slightly faster"
* tag 'libcrypto-conversions-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
fsverity: Switch from crypto_shash to SHA-2 library
fsverity: Explicitly include <linux/export.h>
apparmor: use SHA-256 library API instead of crypto_shash API
- Introduce and start using TRAILING_OVERLAP() helper for fixing
embedded flex array instances (Gustavo A. R. Silva)
- mux: Convert mux_control_ops to a flex array member in mux_chip
(Thorsten Blum)
- string: Group str_has_prefix() and strstarts() (Andy Shevchenko)
- Remove KCOV instrumentation from __init and __head (Ritesh Harjani,
Kees Cook)
- Refactor and rename stackleak feature to support Clang
- Add KUnit test for seq_buf API
- Fix KUnit fortify test under LTO
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCaIfUkgAKCRA2KwveOeQk
uypLAP92r6f47sWcOw/5B9aVffX6Bypsb7dqBJQpCNxI5U1xcAEAiCrZ98UJyOeQ
JQgnXd4N67K4EsS2JDc+FutRn3Yi+A8=
=+5Bq
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- Introduce and start using TRAILING_OVERLAP() helper for fixing
embedded flex array instances (Gustavo A. R. Silva)
- mux: Convert mux_control_ops to a flex array member in mux_chip
(Thorsten Blum)
- string: Group str_has_prefix() and strstarts() (Andy Shevchenko)
- Remove KCOV instrumentation from __init and __head (Ritesh Harjani,
Kees Cook)
- Refactor and rename stackleak feature to support Clang
- Add KUnit test for seq_buf API
- Fix KUnit fortify test under LTO
* tag 'hardening-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (22 commits)
sched/task_stack: Add missing const qualifier to end_of_stack()
kstack_erase: Support Clang stack depth tracking
kstack_erase: Add -mgeneral-regs-only to silence Clang warnings
init.h: Disable sanitizer coverage for __init and __head
kstack_erase: Disable kstack_erase for all of arm compressed boot code
x86: Handle KCOV __init vs inline mismatches
arm64: Handle KCOV __init vs inline mismatches
s390: Handle KCOV __init vs inline mismatches
arm: Handle KCOV __init vs inline mismatches
mips: Handle KCOV __init vs inline mismatch
powerpc/mm/book3s64: Move kfence and debug_pagealloc related calls to __init section
configs/hardening: Enable CONFIG_INIT_ON_FREE_DEFAULT_ON
configs/hardening: Enable CONFIG_KSTACK_ERASE
stackleak: Split KSTACK_ERASE_CFLAGS from GCC_PLUGINS_CFLAGS
stackleak: Rename stackleak_track_stack to __sanitizer_cov_stack_depth
stackleak: Rename STACKLEAK to KSTACK_ERASE
seq_buf: Introduce KUnit tests
string: Group str_has_prefix() and strstarts()
kunit/fortify: Add back "volatile" for sizeof() constants
acpi: nfit: intel: avoid multiple -Wflex-array-member-not-at-end warnings
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaINCpgAKCRCRxhvAZXjc
oqfFAQDcy3rROUF3W34KcSi7rDmaKVSX53d1tUoqH+1zDRpSlwEAriKDNC1ybudp
YAnxVzkRHjHs1296WIuwKq5lfhJ60Q4=
=geAl
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.17-rc1.fileattr' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull fileattr updates from Christian Brauner:
"This introduces the new file_getattr() and file_setattr() system calls
after lengthy discussions.
Both system calls serve as successors and extensible companions to
the FS_IOC_FSGETXATTR and FS_IOC_FSSETXATTR system calls which have
started to show their age in addition to being named in a way that
makes it easy to conflate them with extended attribute related
operations.
These syscalls allow userspace to set filesystem inode attributes on
special files. One of the usage examples is the XFS quota projects.
XFS has project quotas which could be attached to a directory. All new
inodes in these directories inherit project ID set on parent
directory.
The project is created from userspace by opening and calling
FS_IOC_FSSETXATTR on each inode. This is not possible for special
files such as FIFO, SOCK, BLK etc. Therefore, some inodes are left
with empty project ID. Those inodes then are not shown in the quota
accounting but still exist in the directory. This is not critical but
in the case when special files are created in the directory with
already existing project quota, these new inodes inherit extended
attributes. This creates a mix of special files with and without
attributes. Moreover, special files with attributes don't have a
possibility to become clear or change the attributes. This, in turn,
prevents userspace from re-creating quota project on these existing
files.
In addition, these new system calls allow the implementation of
additional attributes that we couldn't or didn't want to fit into the
legacy ioctls anymore"
* tag 'vfs-6.17-rc1.fileattr' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: tighten a sanity check in file_attr_to_fileattr()
tree-wide: s/struct fileattr/struct file_kattr/g
fs: introduce file_getattr and file_setattr syscalls
fs: prepare for extending file_get/setattr()
fs: make vfs_fileattr_[get|set] return -EOPNOTSUPP
selinux: implement inode_file_[g|s]etattr hooks
lsm: introduce new hooks for setting/getting inode fsxattr
fs: split fileattr related helpers into separate file
happen" or "there's a better way to do it" variety)
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCaIRK0QAKCRBZ7Krx/gZQ
66/LAPoCvj5nAZH41F1VfyinA6V96kKsAazjrG7ttpWenu+6GAD/e9YQIAtYro0Z
6f6EWTgrrEZqpOgc9kfHJq60m/TnSg8=
=Ojq4
-----END PGP SIGNATURE-----
Merge tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc VFS updates from Al Viro:
"VFS-related cleanups in various places (mostly of the "that really
can't happen" or "there's a better way to do it" variety)"
* tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
gpib: use file_inode()
binder_ioctl_write_read(): simplify control flow a bit
secretmem: move setting O_LARGEFILE and bumping users' count to the place where we create the file
apparmor: file never has NULL f_path.mnt
landlock: opened file never has a negative dentry
* one extra reference is enough to pin a dentry down; no need
for two. Switch to regular scheme, similar to shmem, debugfs,
etc. - that fixes securityfs_recursive_remove() dentry leak,
among other things.
* we need to have the filesystem pinned to prevent the contents
disappearing; what we do not need is pinning it for each file.
Doing that only for files and directories in the root is enough.
* the previous two changes allow to get rid of the racy kludges
in efi_secret_unlink(), where we can use simple_unlink() instead
of securityfs_remove(). Which does not require unlocking and
relocking the parent, with all deadlocks that invites.
* Make securityfs_remove() take the entire subtree out, turning
securityfs_recursive_remove() into its alias. Makes a lot more
sense for callers and fixes a mount leak, while we are at it.
* Making securityfs_remove() remove the entire subtree allows for
much simpler life in most of the users - efi_secret, ima_fs,
evm, ipe, tmp get cleaner. I hadn't touched apparmor use of
securityfs, but I suspect that it would be useful there as well.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCaIRJkgAKCRBZ7Krx/gZQ
67PmAQCCmJ8Czxb0+4P2J8bJFDELvrT3ff0Ns2d/1m77cATdBAEArOxw5iNXfpfU
0WhjMvQFsgob6jtijG1MAWV7Npz4MwE=
=wraS
-----END PGP SIGNATURE-----
Merge tag 'pull-securityfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull securityfs updates from Al Viro:
"Securityfs cleanups and fixes:
- one extra reference is enough to pin a dentry down; no need for
two. Switch to regular scheme, similar to shmem, debugfs, etc. This
fixes a securityfs_recursive_remove() dentry leak, among other
things.
- we need to have the filesystem pinned to prevent the contents
disappearing; what we do not need is pinning it for each file.
Doing that only for files and directories in the root is enough.
- the previous two changes allow us to get rid of the racy kludges in
efi_secret_unlink(), where we can use simple_unlink() instead of
securityfs_remove(). Which does not require unlocking and relocking
the parent, with all deadlocks that invites.
- Make securityfs_remove() take the entire subtree out, turning
securityfs_recursive_remove() into its alias. Makes a lot more
sense for callers and fixes a mount leak, while we are at it.
- Making securityfs_remove() remove the entire subtree allows for
much simpler life in most of the users - efi_secret, ima_fs, evm,
ipe, tmp get cleaner. I hadn't touched apparmor use of securityfs,
but I suspect that it would be useful there as well"
* tag 'pull-securityfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
tpm: don't bother with removal of files in directory we'll be removing
ipe: don't bother with removal of files in directory we'll be removing
evm_secfs: clear securityfs interactions
ima_fs: get rid of lookup-by-dentry stuff
ima_fs: don't bother with removal of files in directory we'll be removing
efi_secret: clean securityfs use up
make securityfs_remove() remove the entire subtree
fix locking in efi_secret_unlink()
securityfs: pin filesystem only for objects directly in root
securityfs: don't pin dentries twice, once is enough...
The Clang stack depth tracking implementation has a fixed name for
the stack depth tracking callback, "__sanitizer_cov_stack_depth", so
rename the GCC plugin function to match since the plugin has no external
dependencies on naming.
Link: https://lore.kernel.org/r/20250717232519.2984886-2-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
In preparation for adding Clang sanitizer coverage stack depth tracking
that can support stack depth callbacks:
- Add the new top-level CONFIG_KSTACK_ERASE option which will be
implemented either with the stackleak GCC plugin, or with the Clang
stack depth callback support.
- Rename CONFIG_GCC_PLUGIN_STACKLEAK as needed to CONFIG_KSTACK_ERASE,
but keep it for anything specific to the GCC plugin itself.
- Rename all exposed "STACKLEAK" names and files to "KSTACK_ERASE" (named
for what it does rather than what it protects against), but leave as
many of the internals alone as possible to avoid even more churn.
While here, also split "prev_lowest_stack" into CONFIG_KSTACK_ERASE_METRICS,
since that's the only place it is referenced from.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250717232519.2984886-1-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
The transition to the perms32 permission table dropped the need for
the accept2 table as permissions. However accept2 can be used for
flags and may be present even when the perms32 table is present. So
instead of checking on version, check whether the table is present.
Fixes: 2e12c5f060 ("apparmor: add additional flags to extended permission.")
Signed-off-by: John Johansen <john.johansen@canonical.com>
The set of rules on a profile is not dynamically extended, instead
if a new ruleset is needed a new version of the profile is created.
This allows us to use a vector of rules instead of a list, slightly
reducing memory usage and simplifying the code.
Signed-off-by: John Johansen <john.johansen@canonical.com>
This section of profile_transition that occurs after x_to_label only
happens if perms.allow already has the MAY_EXEC bit set, so we don't need
to set it again.
Fixes: 16916b17b4 ("apparmor: force auditing of conflicting attachment execs from confined")
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
The testcase triggers some unnecessary unaligned memory accesses on the
parisc architecture:
Kernel: unaligned access to 0x12f28e27 in policy_unpack_test_init+0x180/0x374 (iir 0x0cdc1280)
Kernel: unaligned access to 0x12f28e67 in policy_unpack_test_init+0x270/0x374 (iir 0x64dc00ce)
Use the existing helper functions put_unaligned_le32() and
put_unaligned_le16() to avoid such warnings on architectures which
prefer aligned memory accesses.
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 98c0cc48e2 ("apparmor: fix policy_unpack_test on big endian systems")
Signed-off-by: John Johansen <john.johansen@canonical.com>
The dfa blob stream for the aa_dfa_unpack() function is expected to be aligned
on a 8 byte boundary.
The static nulldfa_src[] and stacksplitdfa_src[] arrays store the initial
apparmor dfa blob streams, but since they are declared as an array-of-chars
the compiler and linker will only ensure a "char" (1-byte) alignment.
Add an __aligned(8) annotation to the arrays to tell the linker to always
align them on a 8-byte boundary. This avoids runtime warnings at startup on
alignment-sensitive platforms like parisc such as:
Kernel: unaligned access to 0x7f2a584a in aa_dfa_unpack+0x124/0x788 (iir 0xca0109f)
Kernel: unaligned access to 0x7f2a584e in aa_dfa_unpack+0x210/0x788 (iir 0xca8109c)
Kernel: unaligned access to 0x7f2a586a in aa_dfa_unpack+0x278/0x788 (iir 0xcb01090)
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Fixes: 98b824ff89 ("apparmor: refcount the pdb")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Avoid unshifted ouids for socket file operations as observed when using
AppArmor profiles in unprivileged containers with LXD or Incus.
For example, root inside container and uid 1000000 outside, with
`owner /root/sock rw,` profile entry for nc:
/root$ nc -lkU sock & nc -U sock
==> dmesg
apparmor="DENIED" operation="connect" class="file"
namespace="root//lxd-podia_<var-snap-lxd-common-lxd>" profile="sockit"
name="/root/sock" pid=3924 comm="nc" requested_mask="wr" denied_mask="wr"
fsuid=1000000 ouid=0 [<== should be 1000000]
Fix by performing uid mapping as per common_perm_cond() in lsm.c
Signed-off-by: Gabriel Totev <gabriel.totev@zetier.com>
Fixes: c05e705812 ("apparmor: add fine grained af_unix mediation")
Signed-off-by: John Johansen <john.johansen@canonical.com>
When using AppArmor profiles inside an unprivileged container,
the link operation observes an unshifted ouid.
(tested with LXD and Incus)
For example, root inside container and uid 1000000 outside, with
`owner /root/link l,` profile entry for ln:
/root$ touch chain && ln chain link
==> dmesg
apparmor="DENIED" operation="link" class="file"
namespace="root//lxd-feet_<var-snap-lxd-common-lxd>" profile="linkit"
name="/root/link" pid=1655 comm="ln" requested_mask="l" denied_mask="l"
fsuid=1000000 ouid=0 [<== should be 1000000] target="/root/chain"
Fix by mapping inode uid of old_dentry in aa_path_link() rather than
using it directly, similarly to how it's mapped in __file_path_perm()
later in the file.
Signed-off-by: Gabriel Totev <gabriel.totev@zetier.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
When a unix socket is passed into a different confinement domain make
sure its cached mediation labeling is updated to correctly reflect
which domains are using the socket.
Fixes: c05e705812 ("apparmor: add fine grained af_unix mediation")
Signed-off-by: John Johansen <john.johansen@canonical.com>
This line removal should not be there and it makes it more difficult to
backport the following patch.
Cc: Günther Noack <gnoack@google.com>
Cc: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Fixes: 7a11275c37 ("landlock: Refactor layer helpers")
Link: https://lore.kernel.org/r/20250719104204.545188-2-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Policy loaded using abi 7 socket mediation was not being applied
correctly in all cases. In some cases with fs based unix sockets a
subset of permissions where allowed when they should have been denied.
This was happening because the check for if the socket was an fs based
unix socket came before the abi check. But the abi check is where the
correct path is selected, so having the fs unix socket check occur
early would cause the wrong code path to be used.
Fix this by pushing the fs unix to be done after the abi check.
Fixes: dcd7a55941 ("apparmor: gate make fine grained unix mediation behind v9 abi")
Signed-off-by: John Johansen <john.johansen@canonical.com>
AA_DEBUG_LABEL() was not specifying it vargs, which is needed so it can
output debug parameters.
Fixes: 71e6cff3e0 ("apparmor: Improve debug print infrastructure")
Signed-off-by: John Johansen <john.johansen@canonical.com>
The auditing of addresses currently doesn't include the source address
and mixes source and foreign/peer under the same audit name. Fix this
so source is always addr, and the foreign/peer is peer_addr.
Fixes: c05e705812 ("apparmor: add fine grained af_unix mediation")
Signed-off-by: John Johansen <john.johansen@canonical.com>
The use of the double lock is not necessary and problematic. Instead
pull the bits that need locks into their own sections and grab the
needed references.
Fixes: c05e705812 ("apparmor: add fine grained af_unix mediation")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Add a kernel doc header for __end_current_label_crit_section(), and
update the header for __begin_current_label_crit_section().
Fixes: b42ecc5f58ef ("apparmor: make __begin_current_label_crit_section() indicate whether put is needed")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Same as aa_get_newest_cred_label_condref().
This avoids a bunch of work overall and allows the compiler to note when no
clean up is necessary, allowing for tail calls.
This in particular happens in apparmor_file_permission(), which manages to
tail call aa_file_perm() 105 bytes in (vs a regular call 112 bytes in
followed by branches to figure out if clean up is needed).
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
This reverts commit e9ed1eb8f6.
Eric has requested that this patch be taken through the libcrypto-next
tree, instead.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Some versions of the parser are generating an xtable transition per
state in the state machine, even when the state machine isn't using
the transition table.
The parser bug is triggered by
commit 2e12c5f060 ("apparmor: add additional flags to extended permission.")
In addition to fixing this in userspace, mitigate this in the kernel
as part of the policy verification checks by detecting this situation
and adjusting to what is actually used, or if not used at all freeing
it, so we are not wasting unneeded memory on policy.
Fixes: 2e12c5f060 ("apparmor: add additional flags to extended permission.")
Signed-off-by: John Johansen <john.johansen@canonical.com>
This user of SHA-256 does not support any other algorithm, so the
crypto_shash abstraction provides no value. Just use the SHA-256
library API instead, which is much simpler and easier to use.
Acked-by: John Johansen <john.johansen@canonical.com>
Link: https://lore.kernel.org/r/20250630174805.59010-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
On PLPKS enabled PowerVM LPAR, there is no provision to load signed
third-party kernel modules when the key management mode is static. This
is because keys from secure boot secvars are only loaded when the key
management mode is dynamic.
Allow loading of the trustedcadb and moduledb keys even in the static
key management mode, where the secvar format string takes the form
"ibm,plpks-sb-v0".
Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com>
Tested-by: R Nageswara Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250610211907.101384-4-ssrish@linux.ibm.com
Now that we expose struct file_attr as our uapi struct rename all the
internal struct to struct file_kattr to clearly communicate that it is a
kernel internal struct. This is similar to struct mount_{k}attr and
others.
Link: https://lore.kernel.org/20250703-restlaufzeit-baurecht-9ed44552b481@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
Introduce new hooks for setting and getting filesystem extended
attributes on inode (FS_IOC_FSGETXATTR).
Cc: selinux@vger.kernel.org
Cc: Paul Moore <paul@paul-moore.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Andrey Albershteyn <aalbersh@kernel.org>
Link: https://lore.kernel.org/20250630-xattrat-syscall-v6-2-c4e3bc35227b@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Failures in sel_fill_super() will be followed by sel_kill_sb(), which
will call selinuxfs_info_free() anyway.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Christian Brauner <brauner@kernel.org>
[PM: subj and description tweaks]
Signed-off-by: Paul Moore <paul@paul-moore.com>
This command:
# echo foo/bar >/proc/$$/attr/smack/current
gives the task a label 'foo' w/o indication
that label does not match input.
Setting the label with lsm_set_self_attr() syscall
behaves identically.
This occures because:
1) smk_parse_smack() is used to convert input to a label
2) smk_parse_smack() takes only that part from the
beginning of the input that looks like a label.
3) `/' is prohibited in labels, so only "foo" is taken.
(2) is by design, because smk_parse_smack() is used
for parsing strings which are more than just a label.
Silent failure is not a good thing, and there are two
indicators that this was not done intentionally:
(size >= SMK_LONGLABEL) ~> invalid
clause at the beginning of the do_setattr() and the
"Returns the length of the smack label" claim
in the do_setattr() description.
So I fixed this by adding one tiny check:
the taken label length == input length.
Since input length is now strictly controlled,
I changed the two ways of setting label
smack_setselfattr(): lsm_set_self_attr() syscall
smack_setprocattr(): > /proc/.../current
to accommodate the divergence in
what they understand by "input length":
smack_setselfattr counts mandatory \0 into input length,
smack_setprocattr does not.
smack_setprocattr allows various trailers after label
Related changes:
* fixed description for smk_parse_smack
* allow unprivileged tasks validate label syntax.
* extract smk_parse_label_len() from smk_parse_smack()
so parsing may be done w/o string allocation.
* extract smk_import_valid_label() from smk_import_entry()
to avoid repeated parsing.
* smk_parse_smack(): scan null-terminated strings
for no more than SMK_LONGLABEL(256) characters
* smack_setselfattr(): require struct lsm_ctx . flags == 0
to reserve them for future.
Fixes: e114e47377 ("Smack: Simplified Mandatory Access Control Kernel")
Signed-off-by: Konstantin Andreev <andreev@swemel.ru>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
If an unprivileged task is allowed to relabel itself
(/smack/relabel-self is not empty),
it can freely create new labels by writing their
names into own /proc/PID/attr/smack/current
This occurs because do_setattr() imports
the provided label in advance,
before checking "relabel-self" list.
This change ensures that the "relabel-self" list
is checked before importing the label.
Fixes: 38416e5393 ("Smack: limited capability for changing process label")
Signed-off-by: Konstantin Andreev <andreev@swemel.ru>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Max Kellerman recently experienced a problem[1] when calling exec with
differing uid and euid's and he triggered the logic that is supposed
to only handle setuid executables.
When exec isn't changing anything in struct cred it doesn't make sense
to go into the code that is there to handle the case when the
credentials change.
When looking into the history of the code I discovered that this issue
was not present in Linux-2.4.0-test12 and was introduced in
Linux-2.4.0-prerelease when the logic for handling this case was moved
from prepare_binprm to compute_creds in fs/exec.c.
The bug introdused was to comparing euid in the new credentials with
uid instead of euid in the old credentials, when testing if setuid
had changed the euid.
Since triggering the keep ptrace limping along case for setuid
executables makes no sense when it was not a setuid exec revert back
to the logic present in Linux-2.4.0-test12.
This removes the confusingly named and subtlety incorrect helpers
is_setuid and is_setgid, that helped this bug to persist.
The varaiable is_setid is renamed to id_changed (it's Linux-2.4.0-test12)
as the old name describes what matters rather than it's cause.
The code removed in Linux-2.4.0-prerelease was:
- /* Set-uid? */
- if (mode & S_ISUID) {
- bprm->e_uid = inode->i_uid;
- if (bprm->e_uid != current->euid)
- id_change = 1;
- }
-
- /* Set-gid? */
- /*
- * If setgid is set but no group execute bit then this
- * is a candidate for mandatory locking, not a setgid
- * executable.
- */
- if ((mode & (S_ISGID | S_IXGRP)) == (S_ISGID | S_IXGRP)) {
- bprm->e_gid = inode->i_gid;
- if (!in_group_p(bprm->e_gid))
- id_change = 1;
Linux-2.4.0-prerelease added the current logic as:
+ if (bprm->e_uid != current->uid || bprm->e_gid != current->gid ||
+ !cap_issubset(new_permitted, current->cap_permitted)) {
+ current->dumpable = 0;
+
+ lock_kernel();
+ if (must_not_trace_exec(current)
+ || atomic_read(¤t->fs->count) > 1
+ || atomic_read(¤t->files->count) > 1
+ || atomic_read(¤t->sig->count) > 1) {
+ if(!capable(CAP_SETUID)) {
+ bprm->e_uid = current->uid;
+ bprm->e_gid = current->gid;
+ }
+ if(!capable(CAP_SETPCAP)) {
+ new_permitted = cap_intersect(new_permitted,
+ current->cap_permitted);
+ }
+ }
+ do_unlock = 1;
+ }
I have condenced the logic from Linux-2.4.0-test12 to just:
id_changed = !uid_eq(new->euid, old->euid) || !in_group_p(new->egid);
This change is userspace visible, but I don't expect anyone to care.
For the bug that is being fixed to trigger bprm->unsafe has to be set.
The variable bprm->unsafe is set when ptracing an executable, when
sharing a working directory, or when no_new_privs is set. Properly
testing for cases that are safe even in those conditions and doing
nothing special should not affect anyone. Especially if they were
previously ok with their credentials getting munged
To minimize behavioural changes the code continues to set secureexec
when euid != uid or when egid != gid.
[1] https://lkml.kernel.org/r/20250306082615.174777-1-max.kellermann@ionos.com
Reported-by: Max Kellermann <max.kellermann@ionos.com>
Fixes: 64444d3d0d7f ("Linux version 2.4.0-prerelease")
v1: https://lkml.kernel.org/r/878qmxsuy8.fsf@email.froward.int.ebiederm.org
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Reviewed-by: Jann Horn <jannh@google.com>
Acked-by: Kees Cook <kees@kernel.org>
According to [1], the label of a UNIX domain socket (UDS)
file (i.e., the filesystem object representing the socket)
is not supposed to participate in Smack security.
To achieve this, [1] labels UDS files with "*"
in smack_d_instantiate().
Before [2], smack_d_instantiate() was responsible
for initializing Smack security for all inodes,
except ones under /proc
[2] imposed the sole responsibility for initializing
inode security for newly created filesystem objects
on smack_inode_init_security().
However, smack_inode_init_security() lacks some logic
present in smack_d_instantiate().
In particular, it does not label UDS files with "*".
This patch adds the missing labeling of UDS files
with "*" to smack_inode_init_security().
Labeling UDS files with "*" in smack_d_instantiate()
still works for stale UDS files that already exist on
disk. Stale UDS files are useless, but I keep labeling
them for consistency and maybe to make easier for user
to delete them.
Compared to [1], this version introduces the following
improvements:
* UDS file label is held inside inode only
and not saved to xattrs.
* relabeling UDS files (setxattr, removexattr, etc.)
is blocked.
[1] 2010-11-24 Casey Schaufler
commit b4e0d5f079 ("Smack: UDS revision")
[2] 2023-11-16 roberto.sassu
Fixes: e63d86b8b7 ("smack: Initialize the in-memory inode in smack_inode_init_security()")
Link: https://lore.kernel.org/linux-security-module/20231116090125.187209-5-roberto.sassu@huaweicloud.com/
Signed-off-by: Konstantin Andreev <andreev@swemel.ru>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
If memory allocation for the SMACK64TRANSMUTE
xattr value fails in smack_inode_init_security(),
the SMK_INODE_INSTANT flag is not set in
(struct inode_smack *issp)->smk_flags,
leaving the inode as not "instantiated".
It does not matter if fs frees the inode
after failed smack_inode_init_security() call,
but there is no guarantee for this.
To be safe, mark the inode as "instantiated",
even if allocation of xattr values fails.
Signed-off-by: Konstantin Andreev <andreev@swemel.ru>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
When a new file system object is created
and the conditions for label transmutation are met,
the SMACK64TRANSMUTE extended attribute is set
on the object regardless of its type:
file, pipe, socket, symlink, or directory.
However,
SMACK64TRANSMUTE may only be set on directories.
This bug is a combined effect of the commits [1] and [2]
which both transfer functionality
from smack_d_instantiate() to smack_inode_init_security(),
but only in part.
Commit [1] set blank SMACK64TRANSMUTE on improper object types.
Commit [2] set "TRUE" SMACK64TRANSMUTE on improper object types.
[1] 2023-06-10,
Fixes: baed456a6a ("smack: Set the SMACK64TRANSMUTE xattr in smack_inode_init_security()")
Link: https://lore.kernel.org/linux-security-module/20230610075738.3273764-3-roberto.sassu@huaweicloud.com/
[2] 2023-11-16,
Fixes: e63d86b8b7 ("smack: Initialize the in-memory inode in smack_inode_init_security()")
Link: https://lore.kernel.org/linux-security-module/20231116090125.187209-5-roberto.sassu@huaweicloud.com/
Signed-off-by: Konstantin Andreev <andreev@swemel.ru>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
As reported by syzbot, hashtab_init() can be affected by abnormally
large policy loads which would cause the kernel's allocator to emit
a warning in some configurations. Since the SELinux hashtab_init()
code handles the case where the allocation fails, due to a large
request or some other reason, we can safely add the __GFP_NOWARN flag
to squelch these abnormally large allocation warnings.
Reported-by: syzbot+bc2c99c2929c3d219fb3@syzkaller.appspotmail.com
Tested-by: syzbot+bc2c99c2929c3d219fb3@syzkaller.appspotmail.com
Signed-off-by: Paul Moore <paul@paul-moore.com>
Extend the task avdcache to also cache whether the task SID is both
permissive and neveraudit, and return immediately if so in both
selinux_inode_getattr() and selinux_inode_permission().
The same approach could be applied to many of the hook functions
although the avdcache would need to be updated for more than directory
search checks in order for this optimization to be beneficial for checks
on objects other than directories.
To test, apply https://github.com/SELinuxProject/selinux/pull/473 to
your selinux userspace, build and install libsepol, and use the following
CIL policy module:
$ cat neverauditpermissive.cil
(typeneveraudit unconfined_t)
(typepermissive unconfined_t)
Without this module inserted, running the following commands:
perf record make -jN # on an already built allmodconfig tree
perf report --sort=symbol,dso
yields the following percentages (only showing __d_lookup_rcu for
reference and only showing relevant SELinux functions):
1.65% [k] __d_lookup_rcu
0.53% [k] selinux_inode_permission
0.40% [k] selinux_inode_getattr
0.15% [k] avc_lookup
0.05% [k] avc_has_perm
0.05% [k] avc_has_perm_noaudit
0.02% [k] avc_policy_seqno
0.02% [k] selinux_file_permission
0.01% [k] selinux_inode_alloc_security
0.01% [k] selinux_file_alloc_security
for a total of 1.24% for SELinux compared to 1.65% for
__d_lookup_rcu().
After running the following command to insert this module:
semodule -i neverauditpermissive.cil
and then re-running the same perf commands from above yields
the following non-zero percentages:
1.74% [k] __d_lookup_rcu
0.31% [k] selinux_inode_permission
0.03% [k] selinux_inode_getattr
0.03% [k] avc_policy_seqno
0.01% [k] avc_lookup
0.01% [k] selinux_file_permission
0.01% [k] selinux_file_open
for a total of 0.40% for SELinux compared to 1.74% for
__d_lookup_rcu().
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Introduce neveraudit types i.e. types that should never trigger
audit messages. This allows the AVC to skip all audit-related
processing for such types. Note that neveraudit differs from
dontaudit not only wrt being applied for all checks with a given
source type but also in that it disables all auditing, not just
permission denials.
When a type is both a permissive type and a neveraudit type,
the security server can short-circuit the security_compute_av()
logic, allowing all permissions and not auditing any permissions.
This change just introduces the basic support but does not yet
further optimize the AVC or hook function logic when a type
is both a permissive type and a dontaudit type.
Suggested-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
If the end result of a security_compute_sid() computation matches the
ssid or tsid, return that SID rather than looking it up again. This
avoids the problem of multiple initial SIDs that map to the same
context.
Cc: stable@vger.kernel.org
Reported-by: Guido Trentalancia <guido@trentalancia.com>
Fixes: ae254858ce ("selinux: introduce an initial SID for early boot processes")
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Tested-by: Guido Trentalancia <guido@trentalancia.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
... and use securityfs_remove() instead of securityfs_recursive_remove()
Acked-by: Fan Wu <wufan@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
1) creation never returns NULL; error is reported as ERR_PTR()
2) no need to remove file before removing its parent
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
lookup_template_data_hash_algo() machinery is used to locate the
matching ima_algo_array[] element at read time; securityfs
allows to stash that into inode->i_private at object creation
time, so there's no need to bother
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We should count the terminating NUL byte as part of the ctx_len.
Otherwise, UBSAN logs a warning:
UBSAN: array-index-out-of-bounds in security/selinux/xfrm.c:99:14
index 60 is out of range for type 'char [*]'
The allocation itself is correct so there is no actual out of bounds
indexing, just a warning.
Cc: stable@vger.kernel.org
Suggested-by: Christian Göttsche <cgzones@googlemail.com>
Link: https://lore.kernel.org/selinux/CAEjxPJ6tA5+LxsGfOJokzdPeRomBHjKLBVR6zbrg+_w3ZZbM3A@mail.gmail.com/
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Commit d7b6918e22 ("selinux: Deprecate /sys/fs/selinux/user") started
the deprecation process for /sys/fs/selinux/user:
The selinuxfs "user" node allows userspace to request a list
of security contexts that can be reached for a given SELinux
user from a given starting context. This was used by libselinux
when various login-style programs requested contexts for
users, but libselinux stopped using it in 2020.
Kernel support will be removed no sooner than Dec 2025.
A pr_warn() message has been in place since Linux v6.13, this patch
adds a five second sleep to /sys/fs/selinux/user to help make the
deprecation and upcoming removal more noticeable.
Signed-off-by: Paul Moore <paul@paul-moore.com>
Fix a typo in the security_inode_mkdir() comment block.
Signed-off-by: Kalevi Kolttonen <kalevi@kolttonen.fi>
[PM: subject tweak, add description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Kdump kernel doesn't need IMA functionality, and enabling IMA will cost
extra memory. It would be very helpful to allow IMA to be disabled for
kdump kernel.
Hence add a knob ima=on|off here to allow turning IMA off in kdump
kernel if needed.
Note that this IMA disabling is limited to kdump kernel, please don't
abuse it in other kernel and thus serious consequences are caused.
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
... and fix the mount leak when anything's mounted there.
securityfs_recursive_remove becomes an alias for securityfs_remove -
we'll probably need to remove it in a cycle or two.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Nothing on securityfs ever changes parents, so we don't need
to pin the internal mount if it's already pinned for parent.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
incidentally, securityfs_recursive_remove() is broken without that -
it leaks dentries, since simple_recursive_removal() does not expect
anything of that sort. It could be worked around by dput() in
remove_one() callback, but it's easier to just drop that double-get
stuff.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Invert the FINAL_PUT bit so that test_bit_acquire and clear_bit_unlock
can be used instead of smp_mb.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
x86 already uses gcc-8 as the minimum version, this changes all other
architectures to the same version. gcc-8 is used is Debian 10 and Red
Hat Enterprise Linux 8, both of which are still supported, and binutils
2.30 is the oldest corresponding version on those. Ubuntu Pro 18.04 and
SUSE Linux Enterprise Server 15 both use gcc-7 as the system compiler
but additionally include toolchains that remain supported.
With the new minimum toolchain versions, a number of workarounds for older
versions can be dropped, in particular on x86_64 and arm64. Importantly,
the updated compiler version allows removing two of the five remaining
gcc plugins, as support for sancov and structeak features is already
included in modern compiler versions.
I tried collecting the known changes that are possible based on the
new toolchain version, but expect that more cleanups will be possible.
Since this touches multiple architectures, I merged the patches through
the asm-generic tree.
-----BEGIN PGP SIGNATURE-----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=pdDC
-----END PGP SIGNATURE-----
Merge tag 'gcc-minimum-version-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull compiler version requirement update from Arnd Bergmann:
"Require gcc-8 and binutils-2.30
x86 already uses gcc-8 as the minimum version, this changes all other
architectures to the same version. gcc-8 is used is Debian 10 and Red
Hat Enterprise Linux 8, both of which are still supported, and
binutils 2.30 is the oldest corresponding version on those.
Ubuntu Pro 18.04 and SUSE Linux Enterprise Server 15 both use gcc-7 as
the system compiler but additionally include toolchains that remain
supported.
With the new minimum toolchain versions, a number of workarounds for
older versions can be dropped, in particular on x86_64 and arm64.
Importantly, the updated compiler version allows removing two of the
five remaining gcc plugins, as support for sancov and structeak
features is already included in modern compiler versions.
I tried collecting the known changes that are possible based on the
new toolchain version, but expect that more cleanups will be possible.
Since this touches multiple architectures, I merged the patches
through the asm-generic tree."
* tag 'gcc-minimum-version-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
Makefile.kcov: apply needed compiler option unconditionally in CFLAGS_KCOV
Documentation: update binutils-2.30 version reference
gcc-plugins: remove SANCOV gcc plugin
Kbuild: remove structleak gcc plugin
arm64: drop binutils version checks
raid6: skip avx512 checks
kbuild: require gcc-8 and binutils-2.30
-----BEGIN PGP SIGNATURE-----
iIcEABYIAC8WIQQzmBmZPBN6m/hUJmnyomI6a/yO7QUCaDZldREcd3VmYW5Aa2Vy
bmVsLm9yZwAKCRDyomI6a/yO7eT7AQCSU1qiLEHpKEbxRtPyD9m6OBVRrS9joKEn
zABAi00GEgD8C11CKWFemqaL6zexg6c0k51y90K1S1SPZ6pY9HwzZAY=
=c1Gi
-----END PGP SIGNATURE-----
Merge tag 'ipe-pr-20250527' of git://git.kernel.org/pub/scm/linux/kernel/git/wufan/ipe
Pull IPE update from Fan Wu:
"A single commit from Jasjiv Singh, that adds an errno field to IPE
policy load auditing to log failures with error details, not just
successes.
This improves the security audit trail and helps diagnose policy
deployment issues"
* tag 'ipe-pr-20250527' of git://git.kernel.org/pub/scm/linux/kernel/git/wufan/ipe:
ipe: add errno field to IPE policy load auditing
Core
----
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing
again the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter
---------
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools
still use this interface.
- Implement support for wildcard netdevice in netdev basechain
and flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF
---
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols
---------
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the single
flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API
----------
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling
-----------------
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers
----------------------
- OpenVPN virtual driver: offload OpenVPN data channels processing
to the kernel-space, increasing the data transfer throughput WRT
the user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers
-------
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the stearing table handling to reduce significantly
the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=t/Tz
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing again
the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter:
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools still
use this interface.
- Implement support for wildcard netdevice in netdev basechain and
flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF:
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols:
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the
single flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API:
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling:
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers:
- OpenVPN virtual driver: offload OpenVPN data channels processing to
the kernel-space, increasing the data transfer throughput WRT the
user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the steering table handling to significantly
reduce the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature"
* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
selftests/bpf: Fix bpf selftest build warning
selftests: netfilter: Fix skip of wildcard interface test
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
net: openvswitch: Fix the dead loop of MPLS parse
calipso: Don't call calipso functions for AF_INET sk.
selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
octeontx2-pf: QOS: Perform cache sync on send queue teardown
net: mana: Add support for Multi Vports on Bare metal
net: devmem: ncdevmem: remove unused variable
net: devmem: ksft: upgrade rx test to send 1K data
net: devmem: ksft: add 5 tuple FS support
net: devmem: ksft: add exit_wait to make rx test pass
net: devmem: ksft: add ipv4 support
net: devmem: preserve sockc_err
page_pool: fix ugly page_pool formatting
net: devmem: move list_add to net_devmem_bind_dmabuf.
selftests: netfilter: nft_queue.sh: include file transfer duration in log message
net: phy: mscc: Fix memory leak when using one step timestamping
...
-----BEGIN PGP SIGNATURE-----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=6ljO
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20250527' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
- Reduce the SELinux impact on path walks.
Add a small directory access cache to the per-task SELinux state.
This cache allows SELinux to cache the most recently used directory
access decisions in order to avoid repeatedly querying the AVC on
path walks where the majority of the directories have similar
security contexts/labels.
My performance measurements are crude, but prior to this patch the
time spent in SELinux code on a 'make allmodconfig' run was 103% that
of __d_lookup_rcu(), and with this patch the time spent in SELinux
code dropped to 63% of __d_lookup_rcu(), a ~40% improvement.
Additional improvments can be expected in the future, but those will
require additional SELinux policy/toolchain support.
- Add support for wildcards in genfscon policy statements.
This patch allows for wildcards in the genfscon patch matching logic
as opposed to the prefix matching that was used prior to this change.
Adding wilcard support allows for more expressive and efficient path
matching in the policy which is especially helpful for sysfs, and has
resulted in a ~15% boot time reduction in Android.
SELinux policies can opt into wilcard matching by using the
"genfs_seclabel_wildcard" policy capability.
- Unify the error/OOM handling of the SELinux network caches.
A failure to allocate memory for the SELinux network caches isn't
fatal as the object label can still be safely returned to the caller,
it simply means that we cannot add the new data to the cache, at
least temporarily. This patch corrects this behavior for the
InfiniBand cache and does some minor cleanup.
- Minor improvements around constification, 'likely' annotations, and
removal of bogus comments.
* tag 'selinux-pr-20250527' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix the kdoc header for task_avdcache_update
selinux: remove a duplicated include
selinux: reduce path walk overhead
selinux: support wildcard match in genfscon
selinux: drop copy-paste comment
selinux: unify OOM handling in network hashtables
selinux: add likely hints for fast paths
selinux: contify network namespace pointer
selinux: constify network address pointer
-----BEGIN PGP SIGNATURE-----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=Go29
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20250527' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm update from Paul Moore:
"One minor LSM framework patch to move the selinux_netlink_send() hook
under the CONFIG_SECURITY_NETWORK Kconfig knob"
* tag 'lsm-pr-20250527' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lsm: Move security_netlink_send to under CONFIG_SECURITY_NETWORK
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCaDYRjRQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5fpRAQDsdIIwCgyQLFQhZq3wW5dhTUBQW8o9
GjaNHpROKV57cwD9GqT78xi9qsxgaYW0lUUh5+zvlGI5cAtnl8/Fkby7hgY=
=ohlH
-----END PGP SIGNATURE-----
Merge tag 'integrity-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
"Carrying the IMA measurement list across kexec is not a new feature,
but is updated to address a couple of issues:
- Carrying the IMA measurement list across kexec required knowing
apriori all the file measurements between the "kexec load" and
"kexec execute" in order to measure them before the "kexec load".
Any delay between the "kexec load" and "kexec exec" exacerbated the
problem.
- Any file measurements post "kexec load" were not carried across
kexec, resulting in the measurement list being out of sync with the
TPM PCR.
With these changes, the buffer for the IMA measurement list is still
allocated at "kexec load", but copying the IMA measurement list is
deferred to after quiescing the TPM.
Two new kexec critical data records are defined"
* tag 'integrity-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: do not copy measurement list to kdump kernel
ima: measure kexec load and exec events as critical data
ima: make the kexec extra memory configurable
ima: verify if the segment size has changed
ima: kexec: move IMA log copy from kexec load to execute
ima: kexec: define functions to copy IMA log at soft boot
ima: kexec: skip IMA segment validation after kexec soft reboot
kexec: define functions to map and unmap segments
ima: define and call ima_alloc_kexec_file_buf()
ima: rename variable the seq_file "file" to "ima_kexec_file"
- Update overflow helpers to ease refactoring of on-stack flex array
instances (Gustavo A. R. Silva, Kees Cook)
- lkdtm: Use SLAB_NO_MERGE instead of constructors (Harry Yoo)
- Simplify CONFIG_CC_HAS_COUNTED_BY (Jan Hendrik Farr)
- Disable u64 usercopy KUnit test on 32-bit SPARC (Thomas Weißschuh)
- Add missed designated initializers now exposed by fixed randstruct
(Nathan Chancellor, Kees Cook)
- Document compilers versions for __builtin_dynamic_object_size
- Remove ARM_SSP_PER_TASK GCC plugin
- Fix GCC plugin randstruct, add selftests, and restore COMPILE_TEST
builds
- Kbuild: induce full rebuilds when dependencies change with GCC plugins,
the Clang sanitizer .scl file, or the randstruct seed.
- Kbuild: Switch from -Wvla to -Wvla-larger-than=1
- Correct several __nonstring uses for -Wunterminated-string-initialization
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCaDUq9gAKCRA2KwveOeQk
u+ZCAQDhqpOE/yn5gfjyplIvaTtzj9CaW6g11AmPYrimJCuj3QD9G+0o35kzlXOw
f0ZIj2U7LFNgbLos+20hQwhMFf1Zhgg=
=OYzD
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- Update overflow helpers to ease refactoring of on-stack flex array
instances (Gustavo A. R. Silva, Kees Cook)
- lkdtm: Use SLAB_NO_MERGE instead of constructors (Harry Yoo)
- Simplify CONFIG_CC_HAS_COUNTED_BY (Jan Hendrik Farr)
- Disable u64 usercopy KUnit test on 32-bit SPARC (Thomas Weißschuh)
- Add missed designated initializers now exposed by fixed randstruct
(Nathan Chancellor, Kees Cook)
- Document compilers versions for __builtin_dynamic_object_size
- Remove ARM_SSP_PER_TASK GCC plugin
- Fix GCC plugin randstruct, add selftests, and restore COMPILE_TEST
builds
- Kbuild: induce full rebuilds when dependencies change with GCC
plugins, the Clang sanitizer .scl file, or the randstruct seed.
- Kbuild: Switch from -Wvla to -Wvla-larger-than=1
- Correct several __nonstring uses for -Wunterminated-string-initialization
* tag 'hardening-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (23 commits)
Revert "hardening: Disable GCC randstruct for COMPILE_TEST"
lib/tests: randstruct: Add deep function pointer layout test
lib/tests: Add randstruct KUnit test
randstruct: gcc-plugin: Remove bogus void member
net: qede: Initialize qede_ll_ops with designated initializer
scsi: qedf: Use designated initializer for struct qed_fcoe_cb_ops
md/bcache: Mark __nonstring look-up table
integer-wrap: Force full rebuild when .scl file changes
randstruct: Force full rebuild when seed changes
gcc-plugins: Force full rebuild when plugins change
kbuild: Switch from -Wvla to -Wvla-larger-than=1
hardening: simplify CONFIG_CC_HAS_COUNTED_BY
overflow: Fix direct struct member initialization in _DEFINE_FLEX()
kunit/overflow: Add tests for STACK_FLEX_ARRAY_SIZE() helper
overflow: Add STACK_FLEX_ARRAY_SIZE() helper
input/joystick: magellan: Mark __nonstring look-up table const
watchdog: exar: Shorten identity name to fit correctly
mod_devicetable: Enlarge the maximum platform_device_id name length
overflow: Clarify expectations for getting DEFINE_FLEX variable sizes
compiler_types: Identify compiler versions for __builtin_dynamic_object_size
...
Users of IPE require a way to identify when and why an operation fails,
allowing them to both respond to violations of policy and be notified
of potentially malicious actions on their systems with respect to IPE.
This patch introduces a new error field to the AUDIT_IPE_POLICY_LOAD event
to log policy loading failures. Currently, IPE only logs successful policy
loads, but not failures. Tracking failures is crucial to detect malicious
attempts and ensure a complete audit trail for security events.
The new error field will capture the following error codes:
* -ENOKEY: Key used to sign the IPE policy not found in the keyring
* -ESTALE: Attempting to update an IPE policy with an older version
* -EKEYREJECTED: IPE signature verification failed
* -ENOENT: Policy was deleted while updating
* -EEXIST: Same name policy already deployed
* -ERANGE: Policy version number overflow
* -EINVAL: Policy version parsing error
* -EPERM: Insufficient permission
* -ENOMEM: Out of memory (OOM)
* -EBADMSG: Policy is invalid
Here are some examples of the updated audit record types:
AUDIT_IPE_POLICY_LOAD(1422):
audit: AUDIT1422 policy_name="Test_Policy" policy_version=0.0.1
policy_digest=sha256:84EFBA8FA71E62AE0A537FAB962F8A2BD1053964C4299DCA
92BFFF4DB82E86D3 auid=1000 ses=3 lsm=ipe res=1 errno=0
The above record shows a new policy has been successfully loaded into
the kernel with the policy name, version, and hash with the errno=0.
AUDIT_IPE_POLICY_LOAD(1422) with error:
audit: AUDIT1422 policy_name=? policy_version=? policy_digest=?
auid=1000 ses=3 lsm=ipe res=0 errno=-74
The above record shows a policy load failure due to an invalid policy
(-EBADMSG).
By adding this error field, we ensure that all policy load attempts,
whether successful or failed, are logged, providing a comprehensive
audit trail for IPE policy management.
Signed-off-by: Jasjiv Singh <jasjivsingh@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaDBN6wAKCRCRxhvAZXjc
ok32AQD9DTiSCAoVg+7s+gSBuLTi8drPTN++mCaxdTqRh5WpRAD9GVyrGQT0s6LH
eo9bm8d1TAYjilEWM0c0K0TxyQ7KcAA=
=IW7H
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.16-rc1.async.dir' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs directory lookup updates from Christian Brauner:
"This contains cleanups for the lookup_one*() family of helpers.
We expose a set of functions with names containing "lookup_one_len"
and others without the "_len". This difference has nothing to do with
"len". It's rater a historical accident that can be confusing.
The functions without "_len" take a "mnt_idmap" pointer. This is found
in the "vfsmount" and that is an important question when choosing
which to use: do you have a vfsmount, or are you "inside" the
filesystem. A related question is "is permission checking relevant
here?".
nfsd and cachefiles *do* have a vfsmount but *don't* use the non-_len
functions. They pass nop_mnt_idmap and refuse to work on filesystems
which have any other idmap.
This work changes nfsd and cachefile to use the lookup_one family of
functions and to explictily pass &nop_mnt_idmap which is consistent
with all other vfs interfaces used where &nop_mnt_idmap is explicitly
passed.
The remaining uses of the "_one" functions do not require permission
checks so these are renamed to be "_noperm" and the permission
checking is removed.
This series also changes these lookup function to take a qstr instead
of separate name and len. In many cases this simplifies the call"
* tag 'vfs-6.16-rc1.async.dir' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
VFS: change lookup_one_common and lookup_noperm_common to take a qstr
Use try_lookup_noperm() instead of d_hash_and_lookup() outside of VFS
VFS: rename lookup_one_len family to lookup_noperm and remove permission check
cachefiles: Use lookup_one() rather than lookup_one_len()
nfsd: Use lookup_one() rather than lookup_one_len()
VFS: improve interface for lookup_one functions
The label struct is variable length. While its use in struct aa_profile
is fixed length at 2 entries the variable length member needs to be
the last member in the structure.
The code already does this but the comment has it in the wrong location.
Also add a comment to ensure it stays at the end of the structure.
While we are at it, update the documentation for other profile members
as well.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Conflicting attachment paths are an error state that result in the
binary in question executing under an unexpected ix/ux fallback. As such,
it should be audited to record the occurrence of conflicting attachments.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Instead of silently overwriting the conflicting profile attachment string,
include that information in the ix/ux fallback string that gets set as info
instead. Also add a warning print if some other info is set that would be
overwritten by the ix/ux fallback string or by the profile not found error.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Instead of having a literal, making this a constant will allow for (hacky)
detection of conflicting profile attachments from inspection of the info
pointer. This is used in the next patch to augment the information provided
through domain.c:x_to_label for ix/ux fallback.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
find_attach may set info if something unusual happens during that process
(currently only used to signal conflicting attachments, but this could be
expanded in the future). This is information that should be propagated to
userspace via an audit message.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
address_family_names and sock_type_names were created as const char *a[],
which declares them as (non-const) pointers to const chars. Since the
pointers themselves would not be changed, they should be generated as
const char *const a[].
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Conflicting attachment resolution is based on the number of states
traversed to reach an accepting state in the attachment DFA, accounting
for DFA loops traversed during the matching process. However, the loop
counting logic had multiple bugs:
- The inc_wb_pos macro increments both position and length, but length
is supposed to saturate upon hitting buffer capacity, instead of
wrapping around.
- If no revisited state is found when traversing the history, is_loop
would still return true, as if there was a loop found the length of
the history buffer, instead of returning false and signalling that
no loop was found. As a result, the adjustment step of
aa_dfa_leftmatch would sometimes produce negative counts with loop-
free DFAs that traversed enough states.
- The iteration in the is_loop for loop is supposed to stop before
i = wb->len, so the conditional should be < instead of <=.
This patch fixes the above bugs as well as the following nits:
- The count and size fields in struct match_workbuf were not used,
so they can be removed.
- The history buffer in match_workbuf semantically stores aa_state_t
and not unsigned ints, even if aa_state_t is currently unsigned int.
- The local variables in is_loop are counters, and thus should be
unsigned ints instead of aa_state_t's.
Fixes: 21f6066105 ("apparmor: improve overlapping domain attachment resolution")
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Co-developed-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Cross-merge networking fixes after downstream PR (net-6.15-rc8).
Conflicts:
80f2ab46c2 ("irdma: free iwdev->rf after removing MSI-X")
4bcc063939 ("ice, irdma: fix an off by one in error handling code")
c24a65b6a2 ("iidc/ice/irdma: Update IDC to support multiple consumers")
https://lore.kernel.org/20250513130630.280ee6c5@canb.auug.org.au
No extra adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add function short descriptions to the kernel-doc where missing.
Correct a verb and add ending periods to sentences.
smackfs.c:1080: warning: missing initial short description on line:
* smk_net4addr_insert
smackfs.c:1343: warning: missing initial short description on line:
* smk_net6addr_insert
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: linux-security-module@vger.kernel.org
Cc: Paul Moore <paul@paul-moore.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
WB_HISTORY_SIZE was defined to be a value not a power of 2, despite a
comment in the declaration of struct match_workbuf stating it is and a
modular arithmetic usage in the inc_wb_pos macro assuming that it is. Bump
WB_HISTORY_SIZE's value up to 32 and add a BUILD_BUG_ON_NOT_POWER_OF_2
line to ensure that any future changes to the value of WB_HISTORY_SIZE
respect this requirement.
Fixes: 136db99485 ("apparmor: increase left match history buffer size")
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Fix kernel-doc warnings in apparmor header files as reported by
scripts/kernel-doc:
cred.h:128: warning: expecting prototype for end_label_crit_section(). Prototype was for end_current_label_crit_section() instead
file.h:108: warning: expecting prototype for aa_map_file_perms(). Prototype was for aa_map_file_to_perms() instead
lib.h:159: warning: Function parameter or struct member 'hname' not described in 'basename'
lib.h:159: warning: Excess function parameter 'name' description in 'basename'
match.h:21: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* The format used for transition tables is based on the GNU flex table
perms.h:109: warning: Function parameter or struct member 'accum' not described in 'aa_perms_accum_raw'
perms.h:109: warning: Function parameter or struct member 'addend' not described in 'aa_perms_accum_raw'
perms.h:136: warning: Function parameter or struct member 'accum' not described in 'aa_perms_accum'
perms.h:136: warning: Function parameter or struct member 'addend' not described in 'aa_perms_accum'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Ryan Lee <ryan.lee@canonical.com>
Cc: John Johansen <john.johansen@canonical.com>
Cc: John Johansen <john@apparmor.net>
Cc: apparmor@lists.ubuntu.com
Cc: linux-security-module@vger.kernel.org
Cc: Paul Moore <paul@paul-moore.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
The check on profile->signal is always false, the value can never be
less than 1 *and* greater than MAXMAPPED_SIG. Fix this by replacing
the logical operator && with ||.
Fixes: 84c455decf ("apparmor: add support for profiles to define the kill signal")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
This user of SHA-256 does not support any other algorithm, so the
crypto_shash abstraction provides no value. Just use the SHA-256
library API instead, which is much simpler and easier to use.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
The unpack_secmark() function currently uses kfree() to release memory
allocated for secmark structures and their labels. However, if a failure
occurs after partially parsing secmark, sensitive data may remain in
memory, posing a security risk.
To mitigate this, replace kfree() with kfree_sensitive() for freeing
secmark structures and their labels, aligning with the approach used
in free_ruleset().
I am submitting this as an RFC to seek freedback on whether this change
is appropriate and aligns with the subsystem's expectations. If
confirmed to be helpful, I will send a formal patch.
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Kdump kernel doesn't need IMA to do integrity measurement.
Hence the measurement list in 1st kernel doesn't need to be copied to
kdump kernel.
Here skip allocating buffer for measurement list copying if loading
kdump kernel. Then there won't be the later handling related to
ima_kexec_buffer.
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Tested-by: Baoquan He <bhe@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Use the BIT() and BIT_ULL() macros in the new audit code instead of
explicit shifts to improve readability. Use bitmask instead of modulo
operation to simplify code.
Add test_range1_rand15() and test_range2_rand15() KUnit tests to improve
get_id_range() coverage.
Signed-off-by: Günther Noack <gnoack3000@gmail.com>
Link: https://lore.kernel.org/r/20250512093732.1408485-1-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
This reverts commit f5c68a4e84.
It is again possible to build "allmodconfig" with the randstruct GCC
plugin, so enable it for COMPILE_TEST to catch future bugs.
Signed-off-by: Kees Cook <kees@kernel.org>
gcc-12 and higher support the -ftrivial-auto-var-init= flag, after
gcc-8 is the minimum version, this is half of the supported ones, and
the vast majority of the versions that users are actually likely to
have, so it seems like a good time to stop having the fallback
plugin implementation
Older toolchains are still able to build kernels normally without
this plugin, but won't be able to use variable initialization..
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The amount of memory allocated at kexec load, even with the extra memory
allocated, might not be large enough for the entire measurement list. The
indeterminate interval between kexec 'load' and 'execute' could exacerbate
this problem.
Define two new IMA events, 'kexec_load' and 'kexec_execute', to be
measured as critical data at kexec 'load' and 'execute' respectively.
Report the allocated kexec segment size, IMA binary log size and the
runtime measurements count as part of those events.
These events, and the values reported through them, serve as markers in
the IMA log to verify the IMA events are captured during kexec soft
reboot. The presence of a 'kexec_load' event in between the last two
'boot_aggregate' events in the IMA log implies this is a kexec soft
reboot, and not a cold-boot. And the absence of 'kexec_execute' event
after kexec soft reboot implies missing events in that window which
results in inconsistency with TPM PCR quotes, necessitating a cold boot
for a successful remote attestation.
These critical data events are displayed as hex encoded ascii in the
ascii_runtime_measurement_list. Verifying the critical data hash requires
calculating the hash of the decoded ascii string.
For example, to verify the 'kexec_load' data hash:
sudo cat /sys/kernel/security/integrity/ima/ascii_runtime_measurements
| grep kexec_load | cut -d' ' -f 6 | xxd -r -p | sha256sum
To verify the 'kexec_execute' data hash:
sudo cat /sys/kernel/security/integrity/ima/ascii_runtime_measurements
| grep kexec_execute | cut -d' ' -f 6 | xxd -r -p | sha256sum
Co-developed-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com> # ppc64/kvm
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The extra memory allocated for carrying the IMA measurement list across
kexec is hard-coded as half a PAGE. Make it configurable.
Define a Kconfig option, IMA_KEXEC_EXTRA_MEMORY_KB, to configure the
extra memory (in kb) to be allocated for IMA measurements added during
kexec soft reboot. Ensure the default value of the option is set such
that extra half a page of memory for additional measurements is allocated
for the additional measurements.
Update ima_add_kexec_buffer() function to allocate memory based on the
Kconfig option value, rather than the currently hard-coded one.
Suggested-by: Stefan Berger <stefanb@linux.ibm.com>
Co-developed-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com> # ppc64/kvm
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
kexec 'load' may be called multiple times. Free and realloc the buffer
only if the segment_size is changed from the previous kexec 'load' call.
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com> # ppc64/kvm
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The IMA log is currently copied to the new kernel during kexec 'load' using
ima_dump_measurement_list(). However, the IMA measurement list copied at
kexec 'load' may result in loss of IMA measurements records that only
occurred after the kexec 'load'. Move the IMA measurement list log copy
from kexec 'load' to 'execute'
Make the kexec_segment_size variable a local static variable within the
file, so it can be accessed during both kexec 'load' and 'execute'.
Define kexec_post_load() as a wrapper for calling ima_kexec_post_load() and
machine_kexec_post_load(). Replace the existing direct call to
machine_kexec_post_load() with kexec_post_load().
When there is insufficient memory to copy all the measurement logs, copy as
much of the measurement list as possible.
Co-developed-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com> # ppc64/kvm
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The IMA log is currently copied to the new kernel during kexec 'load'
using ima_dump_measurement_list(). However, the log copied at kexec
'load' may result in loss of IMA measurements that only occurred after
kexec "load'. Setup the needed infrastructure to move the IMA log copy
from kexec 'load' to 'execute'.
Define a new IMA hook ima_update_kexec_buffer() as a stub function.
It will be used to call ima_dump_measurement_list() during kexec 'execute'.
Implement ima_kexec_post_load() function to be invoked after the new
Kernel image has been loaded for kexec. ima_kexec_post_load() maps the
IMA buffer to a segment in the newly loaded Kernel. It also registers
the reboot notifier_block to trigger ima_update_kexec_buffer() at
kexec 'execute'.
Set the priority of register_reboot_notifier to INT_MIN to ensure that the
IMA log copy operation will happen at the end of the operation chain, so
that all the IMA measurement records extended into the TPM are copied
Co-developed-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com> # ppc64/kvm
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Currently, the function kexec_calculate_store_digests() calculates and
stores the digest of the segment during the kexec_file_load syscall,
where the IMA segment is also allocated.
Later, the IMA segment will be updated with the measurement log at the
kexec execute stage when a kexec reboot is initiated. Therefore, the
digests should be updated for the IMA segment in the normal case. The
problem is that the content of memory segments carried over to the new
kernel during the kexec systemcall can be changed at kexec 'execute'
stage, but the size and the location of the memory segments cannot be
changed at kexec 'execute' stage.
To address this, skip the calculation and storage of the digest for the
IMA segment in kexec_calculate_store_digests() so that it is not added
to the purgatory_sha_regions.
With this change, the IMA segment is not included in the digest
calculation, storage, and verification.
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Co-developed-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com> # ppc64/kvm
[zohar@linux.ibm.com: Fixed Signed-off-by tag to match author's email ]
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
In the current implementation, the ima_dump_measurement_list() API is
called during the kexec "load" phase, where a buffer is allocated and
the measurement records are copied. Due to this, new events added after
kexec load but before kexec execute are not carried over to the new kernel
during kexec operation
Carrying the IMA measurement list across kexec requires allocating a
buffer and copying the measurement records. Separate allocating the
buffer and copying the measurement records into separate functions in
order to allocate the buffer at kexec 'load' and copy the measurements
at kexec 'execute'.
After moving the vfree() here at this stage in the patch set, the IMA
measurement list fails to verify when doing two consecutive "kexec -s -l"
with/without a "kexec -s -u" in between. Only after "ima: kexec: move
IMA log copy from kexec load to execute" the IMA measurement list verifies
properly with the vfree() here.
Co-developed-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com> # ppc64/kvm
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Before making the function local seq_file "file" variable file static
global, rename it to "ima_kexec_file".
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Acked-by: Baoquan He <bhe@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com> # ppc64/kvm
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Al Viro
NeilBrown
Mateusz Guzik
Thorsten Blum
Casey Schaufler
Christian Brauner
Hongru Zhang
Herbert Xu
Thiébaud Weksteen
Paul Moore
Roberto Sassu
Meenakshi Aggarwal
Jann Horn
Linus Torvalds
Randy Dunlap
Eric Biggers
Coiby Xu
Burak Emir
Neill Kapron
Stephen Smalley
Simon Schuster
Josef Bacik
Qianfeng Rong
Blaise Boscaccy
Tianjia Zhang
Yue Haibing
John Johansen
Jiapeng Chong
Eric Biggers
Kees Cook
Peng Jiang
Ryan Lee
Helge Deller
Gabriel Totev
Mickaël Salaün
Srish Srinivasan
Andrey Albershteyn
Konstantin Andreev
Tingmao Wang
Eric W. Biederman
Kalevi Kolttonen
Baoquan He
Jasjiv Singh
Jakub Kicinski
Colin Ian King
Zilin Guan
Steven Chen
Arnd Bergmann