Weiming Shi says:
xt_match and xt_target structs registered with NFPROTO_UNSPEC can be
loaded by any protocol family through nft_compat. When such a
match/target sets .hooks to restrict which hooks it may run on, the
bitmask uses NF_INET_* constants. This is only correct for families
whose hook layout matches NF_INET_*: IPv4, IPv6, INET, and bridge
all share the same five hooks (PRE_ROUTING ... POST_ROUTING).
ARP only has three hooks (IN=0, OUT=1, FORWARD=2) with different
semantics. Because NF_ARP_OUT == 1 == NF_INET_LOCAL_IN, the .hooks
validation silently passes for the wrong reasons, allowing matches to
run on ARP chains where the hook assumptions (e.g. state->in being
set on input hooks) do not hold. This leads to NULL pointer
dereferences; xt_devgroup is one concrete example:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000044: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000220-0x0000000000000227]
RIP: 0010:devgroup_mt+0xff/0x350
Call Trace:
<TASK>
nft_match_eval (net/netfilter/nft_compat.c:407)
nft_do_chain (net/netfilter/nf_tables_core.c:285)
nft_do_chain_arp (net/netfilter/nft_chain_filter.c:61)
nf_hook_slow (net/netfilter/core.c:623)
arp_xmit (net/ipv4/arp.c:666)
</TASK>
Kernel panic - not syncing: Fatal exception in interrupt
Fix it by restricting arptables to NFPROTO_ARP extensions only.
Note that arptables-legacy only supports:
- arpt_CLASSIFY
- arpt_mangle
- arpt_MARK
that provide explicit NFPROTO_ARP match/target declarations.
Fixes: 9291747f11 ("netfilter: xtables: add device group match")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
mtype_del() counts empty slots below n->pos in k, but it only drops the
bucket when both n->pos and k are zero. This misses buckets whose live
entries have all been removed while n->pos still points past deleted slots.
Treat a bucket as empty when all positions below n->pos are unused and
release it directly instead of shrinking it further.
Fixes: 8af1c6fbd9 ("netfilter: ipset: Fix forceadd evaluation path")
Cc: stable@vger.kernel.org
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <dstsmallbird@foxmail.com>
Signed-off-by: Yifan Wu <yifanwucs@gmail.com>
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Reviewed-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Use the existing master conntrack helper, anything else is not really
supported and it just makes validation more complicated, so just ignore
what helper userspace suggests for this expectation.
This was uncovered when validating CTA_EXPECT_CLASS via different helper
provided by userspace than the existing master conntrack helper:
BUG: KASAN: slab-out-of-bounds in nf_ct_expect_related_report+0x2479/0x27c0
Read of size 4 at addr ffff8880043fe408 by task poc/102
Call Trace:
nf_ct_expect_related_report+0x2479/0x27c0
ctnetlink_create_expect+0x22b/0x3b0
ctnetlink_new_expect+0x4bd/0x5c0
nfnetlink_rcv_msg+0x67a/0x950
netlink_rcv_skb+0x120/0x350
Allowing to read kernel memory bytes off the expectation boundary.
CTA_EXPECT_HELP_NAME is still used to offer the helper name to userspace
via netlink dump.
Fixes: bd07793705 ("netfilter: nfnetlink_queue: allow to attach expectations to conntracks")
Reported-by: Qi Tang <tpluszz77@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
ctnetlink_alloc_expect() allocates expectations from a non-zeroing
slab cache via nf_ct_expect_alloc(). When CTA_EXPECT_NAT is not
present in the netlink message, saved_addr and saved_proto are
never initialized. Stale data from a previous slab occupant can
then be dumped to userspace by ctnetlink_exp_dump_expect(), which
checks these fields to decide whether to emit CTA_EXPECT_NAT.
The safe sibling nf_ct_expect_init(), used by the packet path,
explicitly zeroes these fields.
Zero saved_addr, saved_proto and dir in the else branch, guarded
by IS_ENABLED(CONFIG_NF_NAT) since these fields only exist when
NAT is enabled.
Confirmed by priming the expect slab with NAT-bearing expectations,
freeing them, creating a new expectation without CTA_EXPECT_NAT,
and observing that the ctnetlink dump emits a spurious
CTA_EXPECT_NAT containing stale data from the prior allocation.
Fixes: 076a0ca026 ("netfilter: ctnetlink: add NAT support for expectations")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Qi Tang <tpluszz77@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nf_conntrack_helper_unregister() calls nf_ct_expect_iterate_destroy()
to remove expectations belonging to the helper being unregistered.
However, it passes NULL instead of the helper pointer as the data
argument, so expect_iter_me() never matches any expectation and all
of them survive the cleanup.
After unregister returns, nfnl_cthelper_del() frees the helper
object immediately. Subsequent expectation dumps or packet-driven
init_conntrack() calls then dereference the freed exp->helper,
causing a use-after-free.
Pass the actual helper pointer so expectations referencing it are
properly destroyed before the helper object is freed.
BUG: KASAN: slab-use-after-free in string+0x38f/0x430
Read of size 1 at addr ffff888003b14d20 by task poc/103
Call Trace:
string+0x38f/0x430
vsnprintf+0x3cc/0x1170
seq_printf+0x17a/0x240
exp_seq_show+0x2e5/0x560
seq_read_iter+0x419/0x1280
proc_reg_read+0x1ac/0x270
vfs_read+0x179/0x930
ksys_read+0xef/0x1c0
Freed by task 103:
The buggy address is located 32 bytes inside of
freed 192-byte region [ffff888003b14d00, ffff888003b14dc0)
Fixes: ac7b848390 ("netfilter: expect: add and use nf_ct_expect_iterate helpers")
Signed-off-by: Qi Tang <tpluszz77@gmail.com>
Reviewed-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
IPSET_ATTR_NAME and IPSET_ATTR_NAMEREF are of NLA_STRING type, they
cannot be treated like a c-string.
They either have to be switched to NLA_NUL_STRING, or the compare
operations need to use the nla functions.
Fixes: f830837f0e ("netfilter: ipset: list:set set type support")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Reject names that lack a \0 character before feeding them
to functions that expect c-strings.
Fixes tag is the most recent commit that needs this change.
Fixes: c38c4597e4 ("netfilter: implement xt_cgroup cgroup2 path match")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This is a followup to an old bug fix: NLMSG_DONE needs to account
for the netlink header size, not just the attribute size.
This can result in a WARN splat + drop of the netlink message,
but other than this there are no ill effects.
Fixes: 9dfa1dfe4d ("netfilter: nf_log: account for size of NLMSG_DONE attribute")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The maximum number of flowtable hardware offload actions in IPv6 is:
* ethernet mangling (4 payload actions, 2 for each ethernet address)
* SNAT (4 payload actions)
* DNAT (4 payload actions)
* Double VLAN (4 vlan actions, 2 for popping vlan, and 2 for pushing)
for QinQ.
* Redirect (1 action)
Which makes 17, while the maximum is 16. But act_ct supports for tunnels
actions too. Note that payload action operates at 32-bit word level, so
mangling an IPv6 address takes 4 payload actions.
Update flow_action_entry_next() calls to check for the maximum number of
supported actions.
While at it, rise the maximum number of actions per flow from 16 to 24
so this works fine with IPv6 setups.
Fixes: c29f74e0df ("netfilter: nf_flow_table: hardware offload support")
Reported-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
stmmac_vlan_restore() unconditionally calls stmmac_vlan_update() when
NETIF_F_VLAN_FEATURES is set. On platforms where priv->hw->vlan (or
->update_vlan_hash) is not provided, stmmac_update_vlan_hash() returns
-EINVAL via stmmac_do_void_callback(), resulting in a spurious
"Failed to restore VLANs" error even when no VLAN filtering is in use.
Remove not needed comment.
Remove not used return value from stmmac_vlan_restore().
Tested on Orange Pi Zero 3.
Fixes: bd7ad51253 ("net: stmmac: Fix VLAN HW state restore")
Signed-off-by: Michal Piekos <michal.piekos@mmpsystems.pl>
Link: https://patch.msgid.link/20260328-vlan-restore-error-v4-1-f88624c530dc@mmpsystems.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ftgmac100_alloc_rings() allocates rx_skbs, tx_skbs, rxdes, txdes, and
rx_scratch in stages. On intermediate failures it returned -ENOMEM
directly, leaking resources allocated earlier in the function.
Rework the failure path to use staged local unwind labels and free
allocated resources in reverse order before returning -ENOMEM. This
matches common netdev allocation cleanup style.
Fixes: d72e01a043 ("ftgmac100: Use a scratch buffer for failed RX allocations")
Cc: stable@vger.kernel.org
Signed-off-by: Yufan Chen <yufan.chen@linux.dev>
Link: https://patch.msgid.link/20260328163257.60836-1-yufan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
`ip6fl_seq_show()` walks the global flowlabel hash under the seq-file
RCU read-side lock and prints `fl->opt->opt_nflen` when an option block
is present.
Exclusive flowlabels currently free `fl->opt` as soon as `fl->users`
drops to zero in `fl_release()`. However, the surrounding
`struct ip6_flowlabel` remains visible in the global hash table until
later garbage collection removes it and `fl_free_rcu()` finally tears it
down.
A concurrent `/proc/net/ip6_flowlabel` reader can therefore race that
early `kfree()` and dereference freed option state, triggering a crash
in `ip6fl_seq_show()`.
Fix this by keeping `fl->opt` alive until `fl_free_rcu()`. That matches
the lifetime already required for the enclosing flowlabel while readers
can still reach it under RCU.
Fixes: d3aedd5ebd ("ipv6 flowlabel: Convert hash list to RCU.")
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Tested-by: Ren Wei <enjou1224z@gmail.com>
Signed-off-by: Zhengchuan Liang <zcliangcn@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/07351f0ec47bcee289576f39f9354f4a64add6e4.1774855883.git.zcliangcn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix SCX_KICK_WAIT deadlock where multiple CPUs waiting for each other in
hardirq context form a cycle. Move the wait to a balance callback which
can drop the rq lock and process IPIs.
- Fix inconsistent NUMA node lookup in scx_select_cpu_dfl() where the
waker_node used cpu_to_node() while prev_cpu used
scx_cpu_node_if_enabled(), leading to undefined behavior when per-node
idle tracking is disabled.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCacwiiQ4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGVILAP44s30JBpNyJ9JhAiCoTYzxzOXqqGbotnpQckMF
+7WoJAD/Z9dJO/Sw/AH0fX6WVJDmO0QsQvFXLXJBxWy7A5XVAA0=
=2DW5
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-7.0-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Fix SCX_KICK_WAIT deadlock where multiple CPUs waiting for each other
in hardirq context form a cycle. Move the wait to a balance callback
which can drop the rq lock and process IPIs.
- Fix inconsistent NUMA node lookup in scx_select_cpu_dfl() where
the waker_node used cpu_to_node() while prev_cpu used
scx_cpu_node_if_enabled(), leading to undefined behavior when
per-node idle tracking is disabled.
* tag 'sched_ext-for-7.0-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
selftests/sched_ext: Add cyclic SCX_KICK_WAIT stress test
sched_ext: Fix SCX_KICK_WAIT deadlock by deferring wait to balance callback
sched_ext: Fix inconsistent NUMA node lookup in scx_select_cpu_dfl()
- Fix false positive stall reports on weakly ordered architectures where
the lockless worklist/timestamp check in the watchdog can observe stale
values due to memory reordering. Recheck under pool->lock to confirm.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCacwiew4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGX66AQCT5ZNUV46mQdQU8TXV4qMiAW1gdwoUT+rvcQ9Q
u2jA/AD/S1uHycAWKqA+TTL8NfNvhgyhgq1AVbYUlTRXCz3iwgU=
=BlI5
-----END PGP SIGNATURE-----
Merge tag 'wq-for-7.0-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fix from Tejun Heo:
- Fix false positive stall reports on weakly ordered architectures
where the lockless worklist/timestamp check in the watchdog can
observe stale values due to memory reordering.
Recheck under pool->lock to confirm.
* tag 'wq-for-7.0-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Better describe stall check
workqueue: Fix false positive stall reports
- Fix cgroup rmdir racing with dying tasks. Deferred task cgroup unlink
introduced a window where cgroup.procs is empty but the cgroup is still
populated, causing rmdir to fail with -EBUSY and selftest failures. Make
rmdir wait for dying tasks to fully leave and fix selftests to not depend
on synchronous populated updates.
- Fix cpuset v1 task migration failure from empty cpusets under strict
security policies. When CPU hotplug removes the last CPU from a v1
cpuset, tasks must be migrated to an ancestor without a
security_task_setscheduler() check that would block the migration.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCacwibg4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGXHEAP98nVEKyl7c7+sXYtwOPn8KEhdHkdpHyPZwhpS2
1wLhaQEAm8yO49s7IgvGPWSz0s/gQdmF5/x8RAee0sJsZALvGQg=
=bUUt
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-7.0-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Fix cgroup rmdir racing with dying tasks.
Deferred task cgroup unlink introduced a window where cgroup.procs
is empty but the cgroup is still populated, causing rmdir to fail
with -EBUSY and selftest failures.
Make rmdir wait for dying tasks to fully leave and fix selftests to
not depend on synchronous populated updates.
- Fix cpuset v1 task migration failure from empty cpusets under strict
security policies.
When CPU hotplug removes the last CPU from a v1 cpuset, tasks must be
migrated to an ancestor without a security_task_setscheduler() check
that would block the migration.
* tag 'cgroup-for-7.0-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Skip security check for hotplug induced v1 task migration
cgroup/cpuset: Simplify setsched decision check in task iteration loop of cpuset_can_attach()
cgroup: Fix cgroup_drain_dying() testing the wrong condition
selftests/cgroup: Don't require synchronous populated update on task exit
cgroup: Wait for dying tasks to leave on rmdir
When a CPU hot removal causes a v1 cpuset to lose all its CPUs, the
cpuset hotplug handler will schedule a work function to migrate tasks
in that cpuset with no CPU to its ancestor to enable those tasks to
continue running.
If a strict security policy is in place, however, the task migration
may fail when security_task_setscheduler() call in cpuset_can_attach()
returns a -EACCES error. That will mean that those tasks will have
no CPU to run on. The system administrators will have to explicitly
intervene to either add CPUs to that cpuset or move the tasks elsewhere
if they are aware of it.
This problem was found by a reported test failure in the LTP's
cpuset_hotplug_test.sh. Fix this problem by treating this special case as
an exception to skip the setsched security check in cpuset_can_attach()
when a v1 cpuset with tasks have no CPU left.
With that patch applied, the cpuset_hotplug_test.sh test can be run
successfully without failure.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Centralize the check required to run security_task_setscheduler() in
the task iteration loop of cpuset_can_attach() outside of the loop as
it has no dependency on the characteristics of the tasks themselves.
There is no functional change.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmnLsoQACgkQnJ2qBz9k
QNmnIAgAmJtXFZu/uJiRR6RrxmYzIdznkaZ8aTGeApQfG432goHqPhh1j+TKpe7Q
YwrB90YP6umL16HOyKvci/jNpv7+vFb8sr93FPu8+01AnMJqfvA3IJ+hrzPy6IcX
dqpO4oKr9gqbmf2/9Eny5mv50xcNI3+M7y+xh0MFsKoZxnEb2j4pCKQsPO0qMOZw
Aui1fFb4nXpcWUlIJtNFRuXXR3pQf4n8ZpfywhUCe4FV5RRrwiq6Y8If0Tj8lqgx
2fEwbkkjZkFVlOijNhZSSWKnobwg3oUbpXStZE6Kyw60vZBcQgEKWOAke175v+qf
XMuhiSrSawJDC45SZmb8QtGe8GEV6g==
=gYPI
-----END PGP SIGNATURE-----
Merge tag 'fs_for_v7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull udf fix from Jan Kara:
"Fix for a race in UDF that can lead to memory corruption"
* tag 'fs_for_v7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Fix race between file type conversion and writeback
mpage: Provide variant of mpage_writepages() with own optional folio handler
The Lenovo Yoga Pro 7 14IMH9 (DMI: 83E2) shares PCI SSID 17aa:3847
with the Legion 7 16ACHG6, but has a different codec subsystem ID
(17aa:38cf). The existing SND_PCI_QUIRK for 17aa:3847 applies
ALC287_FIXUP_LEGION_16ACHG6, which attempts to initialize an external
I2C amplifier (CLSA0100) that is not present on the Yoga Pro 7 14IMH9.
As a result, pin 0x17 (bass speakers) is connected to DAC 0x06 which
has no volume control, making hardware volume adjustment completely
non-functional. Audio is either silent or at maximum volume regardless
of the slider position.
Add a HDA_CODEC_QUIRK entry using the codec subsystem ID (17aa:38cf)
to correctly identify the Yoga Pro 7 14IMH9 and apply
ALC287_FIXUP_YOGA9_14IMH9_BASS_SPK_PIN, which redirects pin 0x17 to
DAC 0x02 and restores proper volume control. The existing Legion entry
is preserved unchanged.
This follows the same pattern used for 17aa:386e, where Legion Y9000X
and Yoga Pro 7 14ARP8 share a PCI SSID but are distinguished via
HDA_CODEC_QUIRK.
Link: https://github.com/nomad4tech/lenovo-yoga-pro-7-linux
Tested-by: Alexander Savenko <alex.sav4387@gmail.com>
Signed-off-by: Alexander Savenko <alex.sav4387@gmail.com>
Link: https://patch.msgid.link/20260331082929.44890-1-alex.sav4387@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
br_mrp_start_test() and br_mrp_start_in_test() accept the user-supplied
interval value from netlink without validation. When interval is 0,
usecs_to_jiffies(0) yields 0, causing the delayed work
(br_mrp_test_work_expired / br_mrp_in_test_work_expired) to reschedule
itself with zero delay. This creates a tight loop on system_percpu_wq
that allocates and transmits MRP test frames at maximum rate, exhausting
all system memory and causing a kernel panic via OOM deadlock.
The same zero-interval issue applies to br_mrp_start_in_test_parse()
for interconnect test frames.
Use NLA_POLICY_MIN(NLA_U32, 1) in the nla_policy tables for both
IFLA_BRIDGE_MRP_START_TEST_INTERVAL and
IFLA_BRIDGE_MRP_START_IN_TEST_INTERVAL, so zero is rejected at the
netlink attribute parsing layer before the value ever reaches the
workqueue scheduling code. This is consistent with how other bridge
subsystems (br_fdb, br_mst) enforce range constraints on netlink
attributes.
Fixes: 20f6a05ef6 ("bridge: mrp: Rework the MRP netlink interface")
Fixes: 7ab1748e4c ("bridge: mrp: Extend MRP netlink interface for configuring MRP interconnect")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260328063000.1845376-1-xmei5@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This reverts commit c073f07576 ("ASoC: Intel: sof_sdw: select PINCTRL_CS42L43 and SPI_CS42L43")
Currently, SND_SOC_INTEL_SOUNDWIRE_SOF_MACH selects PINCTRL_CS42L43
without also selecting or depending on PINCTRL, despite PINCTRL_CS42L43
depending on PINCTRL.
See the following Kbuild warning:
WARNING: unmet direct dependencies detected for PINCTRL_CS42L43
Depends on [n]: PINCTRL [=n] && MFD_CS42L43 [=m]
Selected by [m]:
- SND_SOC_INTEL_SOUNDWIRE_SOF_MACH [=m] && SOUND [=y] && SND [=m] && SND_SOC [=m] && SND_SOC_INTEL_MACH [=y] && (SND_SOC_SOF_INTEL_COMMON [=m] || !SND_SOC_SOF_INTEL_COMMON [=m]) && SND_SOC_SOF_INTEL_SOUNDWIRE [=m] && I2C [=y] && SPI_MASTER [=y] && ACPI [=y] && (MFD_INTEL_LPSS [=n] || COMPILE_TEST [=y]) && (SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES [=n] || COMPILE_TEST [=y]) && SOUNDWIRE [=m]
In response to v1 of this patch [1], Arnd pointed out that there is
no compile-time dependency sof_sdw and the PINCTRL_CS42L43 driver.
After testing, I can confirm that the kernel compiled with
SND_SOC_INTEL_SOUNDWIRE_SOF_MACH enabled and PINCTRL_CS42L43 disabled.
This unmet dependency was detected by kconfirm, a static analysis
tool for Kconfig.
Link: https://lore.kernel.org/all/b8aecc71-1fed-4f52-9f6c-263fbe56d493@app.fastmail.com/ [1]
Fixes: c073f07576 ("ASoC: Intel: sof_sdw: select PINCTRL_CS42L43 and SPI_CS42L43")
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260325001522.1727678-1-julianbraha@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In rt5660_hw_params(), the error path for snd_soc_dai_set_sysclk()
correctly uses rtd->dev as the logging device, but the error path for
snd_soc_dai_set_pll() uses codec_dai->dev instead.
These two devices are distinct:
- rtd->dev is the platform device of the PCM runtime (the Intel HDA/SSP
controller, e.g. 0000:00:1f.3), which owns the machine driver callback.
- codec_dai->dev is the I2C device of the rt5660 codec itself
(i2c-10EC5660:00).
Since hw_params is a machine driver operation and both calls are made
within the same function from the machine driver's context, all error
messages should be attributed to rtd->dev. Using codec_dai->dev for one
of them would suggest the error originates inside the codec driver,
which is misleading.
Align the PLL error log with the sysclk one to use rtd->dev, matching
the convention used by all other Intel board drivers in this directory.
Signed-off-by: Sachin Mokashi <sachin.mokashi@intel.com>
Link: https://patch.msgid.link/20260327131439.1330373-1-sachin.mokashi@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Suraj Gupta says:
====================
Correct BD length masks and BQL accounting for multi-BD TX packets
This patch series fixes two issues in the Xilinx AXI Ethernet driver:
1. Corrects the BD length masks to match the AXIDMA IP spec.
2. Fixes BQL accounting for multi-BD TX packets.
====================
Link: https://patch.msgid.link/20260327073238.134948-1-suraj.gupta2@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When a TX packet spans multiple buffer descriptors (scatter-gather),
axienet_free_tx_chain sums the per-BD actual length from descriptor
status into a caller-provided accumulator. That sum is reset on each
NAPI poll. If the BDs for a single packet complete across different
polls, the earlier bytes are lost and never credited to BQL. This
causes BQL to think bytes are permanently in-flight, eventually
stalling the TX queue.
The SKB pointer is stored only on the last BD of a packet. When that
BD completes, use skb->len for the byte count instead of summing
per-BD status lengths. This matches netdev_sent_queue(), which debits
skb->len, and naturally survives across polls because no partial
packet contributes to the accumulator.
Fixes: c900e49d58 ("net: xilinx: axienet: Implement BQL")
Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20260327073238.134948-3-suraj.gupta2@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The XAXIDMA_BD_CTRL_LENGTH_MASK and XAXIDMA_BD_STS_ACTUAL_LEN_MASK
macros were defined as 0x007FFFFF (23 bits), but the AXI DMA IP
product guide (PG021) specifies the buffer length field as bits 25:0
(26 bits). Update both masks to match the IP documentation.
In practice this had no functional impact, since Ethernet frames are
far smaller than 2^23 bytes and the extra bits were always zero, but
the masks should still reflect the hardware specification.
Fixes: 8a3b7a252d ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20260327073238.134948-2-suraj.gupta2@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
pn532_receive_buf() appends every incoming byte to dev->recv_skb and
only resets the buffer after pn532_uart_rx_is_frame() recognizes a
complete frame. A continuous stream of bytes without a valid PN532 frame
header therefore keeps growing the skb until skb_put_u8() hits the tail
limit.
Drop the accumulated partial frame once the fixed receive buffer is full
so malformed UART traffic cannot grow the skb past
PN532_UART_SKB_BUFF_LEN.
Fixes: c656aa4c27 ("nfc: pn533: add UART phy driver")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260326142033.82297-1-pengpeng@iscas.ac.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
bond_xmit_broadcast() reuses the original skb for the last slave
(determined by bond_is_last_slave()) and clones it for others.
Concurrent slave enslave/release can mutate the slave list during
RCU-protected iteration, changing which slave is "last" mid-loop.
This causes the original skb to be double-consumed (double-freed).
Replace the racy bond_is_last_slave() check with a simple index
comparison (i + 1 == slaves_count) against the pre-snapshot slave
count taken via READ_ONCE() before the loop. This preserves the
zero-copy optimization for the last slave while making the "last"
determination stable against concurrent list mutations.
The UAF can trigger the following crash:
==================================================================
BUG: KASAN: slab-use-after-free in skb_clone
Read of size 8 at addr ffff888100ef8d40 by task exploit/147
CPU: 1 UID: 0 PID: 147 Comm: exploit Not tainted 7.0.0-rc3+ #4 PREEMPTLAZY
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:123)
print_report (mm/kasan/report.c:379 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:597)
skb_clone (include/linux/skbuff.h:1724 include/linux/skbuff.h:1792 include/linux/skbuff.h:3396 net/core/skbuff.c:2108)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5334)
bond_start_xmit (drivers/net/bonding/bond_main.c:5567 drivers/net/bonding/bond_main.c:5593)
dev_hard_start_xmit (include/linux/netdevice.h:5325 include/linux/netdevice.h:5334 net/core/dev.c:3871 net/core/dev.c:3887)
__dev_queue_xmit (include/linux/netdevice.h:3601 net/core/dev.c:4838)
ip6_finish_output2 (include/net/neighbour.h:540 include/net/neighbour.h:554 net/ipv6/ip6_output.c:136)
ip6_finish_output (net/ipv6/ip6_output.c:208 net/ipv6/ip6_output.c:219)
ip6_output (net/ipv6/ip6_output.c:250)
ip6_send_skb (net/ipv6/ip6_output.c:1985)
udp_v6_send_skb (net/ipv6/udp.c:1442)
udpv6_sendmsg (net/ipv6/udp.c:1733)
__sys_sendto (net/socket.c:730 net/socket.c:742 net/socket.c:2206)
__x64_sys_sendto (net/socket.c:2209)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
Allocated by task 147:
Freed by task 147:
The buggy address belongs to the object at ffff888100ef8c80
which belongs to the cache skbuff_head_cache of size 224
The buggy address is located 192 bytes inside of
freed 224-byte region [ffff888100ef8c80, ffff888100ef8d60)
Memory state around the buggy address:
ffff888100ef8c00: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc
ffff888100ef8c80: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff888100ef8d00: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
^
ffff888100ef8d80: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
ffff888100ef8e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Fixes: 4e5bd03ae3 ("net: bonding: fix bond_xmit_broadcast return value error bug")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Link: https://patch.msgid.link/20260326075553.3960562-1-xmei5@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The recent refactoring of xfi driver changed the assignment of
atc->daios[] at atc_get_resources(); now it loops over all enum
DAIOTYP entries while it looped formerly only a part of them.
The problem is that the last entry, SPDIF1, is a special type that
is used only for hw20k1 CTSB073X model (as a replacement of SPDIFIO),
and there is no corresponding definition for hw20k2. Due to the lack
of the info, it caused a kernel crash on hw20k2, which was already
worked around by the commit b045ab3dff ("ALSA: ctxfi: Fix missing
SPDIFI1 index handling").
This patch addresses the root cause of the regression above properly,
simply by skipping the incorrect SPDIF1 type in the parser loop.
For making the change clearer, the code is slightly arranged, too.
Fixes: a2dbaeb5c6 ("ALSA: ctxfi: Refactor resource alloc for sparse mappings")
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.suse.com/show_bug.cgi?id=1259925
Link: https://patch.msgid.link/20260331081227.216134-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Pin Complex 0x17 (bass/woofer speakers) is incorrectly reported as
unconnected in the BIOS (pin default 0x411111f0 = N/A). This causes the
kernel to configure speaker_outs=0, meaning only the tweeters (pin 0x14)
are used. The result is very low, tinny audio with no bass.
The existing quirk ALC287_FIXUP_YOGA9_14IAP7_BASS_SPK_PIN (already present
in patch_realtek.c for SSID 0x17aa3801) fixes the issue completely.
Reported-by: Garcicasti <andresgarciacastilla@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221298
Signed-off-by: songxiebing <songxiebing@kylinos.cn>
Link: https://patch.msgid.link/20260331033650.285601-1-songxiebing@kylinos.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After commit 1618aa3c2e ("btrfs: simplify return variables in
lookup_extent_data_ref()"), the err and ret variables were merged into
a single ret variable. However, when btrfs_next_leaf() returns 0
(success), ret is overwritten from -ENOENT to 0. If the first key in
the next leaf does not match (different objectid or type), the function
returns 0 instead of -ENOENT, making the caller believe the lookup
succeeded when it did not. This can lead to operations on the wrong
extent tree item, potentially causing extent tree corruption.
Fix this by returning -ENOENT directly when the key does not match,
instead of relying on the ret variable.
Fixes: 1618aa3c2e ("btrfs: simplify return variables in lookup_extent_data_ref()")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: robbieko <robbieko@synology.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
bnxt_hwrm_func_backing_store_qcaps_v2() stores resp->type from the
firmware response in ctxm->type and later uses that value to index
fixed backing-store metadata arrays such as ctx_arr[] and
bnxt_bstore_to_trace[].
ctxm->type is fixed by the current backing-store query type and matches
the array index of ctx->ctx_arr. Set ctxm->type from the current loop
variable instead of depending on resp->type.
Also update the loop to advance type from next_valid_type in the for
statement, which keeps the control flow simpler for non-valid and
unchanged entries.
Fixes: 6a4d0774f0 ("bnxt_en: Add support for new backing store query firmware API")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Tested-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260328234357.43669-1-pengpeng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Netfilter flowtable can theoretically try to offload flower rules as soon
as a net_device is registered while all the other ones are not
registered or initialized, triggering a possible NULL pointer dereferencing
of qdma pointer in airoha_ppe_set_cpu_port routine. Moreover, if
register_netdev() fails for a particular net_device, there is a small
race if Netfilter tries to offload flowtable rules before all the
net_devices are properly unregistered in airoha_probe() error patch,
triggering a NULL pointer dereferencing in airoha_ppe_set_cpu_port
routine. In order to avoid any possible race, delay offloading until
all net_devices are registered in the networking subsystem.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260329-airoha-regiser-race-fix-v2-1-f4ebb139277b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When building netlink messages, tc_chain_fill_node() never initializes
the tcm_info field of struct tcmsg. Since the allocation is not zeroed,
kernel heap memory is leaked to userspace through this 4-byte field.
The fix simply zeroes tcm_info alongside the other fields that are
already initialized.
Fixes: 32a4f5ecd7 ("net: sched: introduce chain object to uapi")
Signed-off-by: Yochai Eisenrich <echelonh@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260328211436.1010152-1-echelonh@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to properly cleanup hw rx QDMA queues and bring the device to
the initial state, reset rx DMA queue head/tail index. Moreover, reset
queued DMA descriptor fields.
Fixes: 23020f0493 ("net: airoha: Introduce ethernet support for EN7581 SoC")
Tested-by: Madhur Agrawal <Madhur.Agrawal@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260327-airoha_qdma_cleanup_rx_queue-fix-v1-1-369d6ab1511a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix missing zeroization of the ChaCha state
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCacrR+xQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK9IdAQDpZU7HYigXJJxdlLKi5BWqRdMS85Qz
JYAlahqXGLclnQD+KlXc0FFZagy/EwTYNTyXh5Adl1hvhbUvx+hvDrgLwQo=
=0HZN
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fix from Eric Biggers:
"Fix missing zeroization of the ChaCha state"
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: chacha: Zeroize permuted_state before it leaves scope
- Fix build failure when libbpf does not exist
RTLA supports building without BPF libraries, but a recent change
added a libbpf.h include outside of the BPF protection which caused
build failures when libbpf was not installed.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCacqphhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qjglAQDZFyZlJ5x13SbmxcIkA+pSy7zrWkxt
3hB09dkdY2q2uAEA+PMALreOSF2A1dyH8c6/yuxf3ftcUZH+/XnkQeheows=
=f4XK
-----END PGP SIGNATURE-----
Merge tag 'trace-rtla-v7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull rtla build fix from Steven Rostedt:
- Fix build failure when libbpf does not exist
RTLA supports building without BPF libraries, but a recent change
added a libbpf.h include outside of the BPF protection which caused
build failures when libbpf was not installed.
* tag 'trace-rtla-v7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rtla: Fix build without libbpf header
ep93xx_i2s_enable() calls clk_prepare_enable() on three clocks in
sequence (mclk, sclk, lrclk) without checking the return value of any
of them. If an intermediate enable fails, the clocks that were already
enabled are never rolled back, leaking them until the next disable cycle
— which may never come if the stream never started cleanly.
Change ep93xx_i2s_enable() from void to int. Add error checking after
each clk_prepare_enable() call and unwind already-enabled clocks on
failure. Propagate the error through ep93xx_i2s_startup() and
ep93xx_i2s_resume(), both of which already return int.
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Fixes: f4ff6b56bc ("ASoC: cirrus: i2s: Prepare clock before using it")
Link: https://patch.msgid.link/20260324210909.45494-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a test that creates a 3-CPU kick_wait cycle (A->B->C->A). A BPF
scheduler kicks the next CPU in the ring with SCX_KICK_WAIT on every
enqueue while userspace workers generate continuous scheduling churn via
sched_yield(). Without the preceding fix, this hangs the machine within seconds.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
SCX_KICK_WAIT busy-waits in kick_cpus_irq_workfn() using
smp_cond_load_acquire() until the target CPU's kick_sync advances. Because
the irq_work runs in hardirq context, the waiting CPU cannot reschedule and
its own kick_sync never advances. If multiple CPUs form a wait cycle, all
CPUs deadlock.
Replace the busy-wait in kick_cpus_irq_workfn() with resched_curr() to
force the CPU through do_pick_task_scx(), which queues a balance callback
to perform the wait. The balance callback drops the rq lock and enables
IRQs following the sched_core_balance() pattern, so the CPU can process
IPIs while waiting. The local CPU's kick_sync is advanced on entry to
do_pick_task_scx() and continuously during the wait, ensuring any CPU that
starts waiting for us sees the advancement and cannot form cyclic
dependencies.
Fixes: 90e55164da ("sched_ext: Implement SCX_KICK_WAIT")
Cc: stable@vger.kernel.org # v6.12+
Reported-by: Christian Loehle <christian.loehle@arm.com>
Link: https://lore.kernel.org/r/20260316100249.1651641-1-christian.loehle@arm.com
Signed-off-by: Tejun Heo <tj@kernel.org>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Component has "card_aux_list" which is added/deled in bind/unbind aux dev
function (A), and used in for_each_card_auxs() loop (B).
static void soc_unbind_aux_dev(...)
{
...
for_each_card_auxs_safe(...) {
...
(A) list_del(&component->card_aux_list);
} ^^^^^^^^^^^^^
}
static int soc_bind_aux_dev(...)
{
...
for_each_card_pre_auxs(...) {
...
(A) list_add(&component->card_aux_list, ...);
} ^^^^^^^^^^^^^
...
}
#define for_each_card_auxs(card, component) \
(B) list_for_each_entry(component, ..., card_aux_list)
^^^^^^^^^^^^^
But it has been used without calling INIT_LIST_HEAD().
> git grep card_aux_list sound/soc
sound/soc/soc-core.c: list_del(&component->card_aux_list);
sound/soc/soc-core.c: list_add(&component->card_aux_list, ...);
call missing INIT_LIST_HEAD() for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87341mxa8l.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
rtla supports building without libbpf. However, BPF actions
patchset [1] adds an include of bpf/libbpf.h into timerlat_bpf.h,
which breaks build on systems that don't have libbpf headers
installed.
This is a leftover from a draft version of the patchset where
timerlat_bpf_set_action() (which takes a struct bpf_program * argument)
was defined in the header. timerlat_bpf.c already includes bpf/libbpf.h
via timerlat.skel.h when libbpf is present.
Remove the redundant include to fix build on systems without libbpf
headers.
[1] https://lore.kernel.org/linux-trace-kernel/20251126144205.331954-1-tglozar@redhat.com/T/
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Crystal Wood <crwood@redhat.com>
Cc: Costa Shulyupin <costa.shul@redhat.com>
Link: https://patch.msgid.link/20260330091207.16184-1-tglozar@redhat.com
Reported-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Closes: https://lore.kernel.org/linux-trace-kernel/20260329122202.65a8b575@robin/
Fixes: 8cd0f08ac7 ("rtla/timerlat: Support tail call from BPF program")
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
There is another Book2 Pro model (NP950QED) that seems equipped with
the same speaker module as the non-360 model, which requires
ALC298_FIXUP_SAMSUNG_AMP_V2_2_AMPS quirk.
Reported-by: Throw <zakkabj@gmail.com>
Link: https://patch.msgid.link/20260330162249.147665-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HP Laptop 15-fc0xxx (subsystem ID 0x103c8dc9) has an internal
DMIC connected to the AMD ACP6x audio coprocessor. Add a DMI quirk
entry so the internal microphone is properly detected on this model.
Tested on HP Laptop 15-fc0237ns with Fedora 43 (kernel 6.19.9).
Signed-off-by: Gilson Marquato Júnior <gilsonmandalogo@hotmail.com>
Link: https://patch.msgid.link/20260330-hp-15-fc0xxx-dmic-v2-v1-1-6dd6f53a1917@hotmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pablo Neira Ayuso
Yifan Wu
Qi Tang
Florian Westphal
Geoffrey D. Bennett
Michal Piekos
Yufan Chen
Li Xiasong
Zhengchuan Liang
Linus Torvalds
Waiman Long
Zhang Heng
Alexander Savenko
Xiang Mei
Julian Braha
Sachin Mokashi
Paolo Abeni
Suraj Gupta
Pengpeng Hou
Takashi Iwai
songxiebing
robbieko
Lorenzo Bianconi
Yochai Eisenrich
Guoyu Su
Jihed Chaibi
Tejun Heo
Kuninori Morimoto
Tomas Glozar
Gilson Marquato Júnior