Core changes:
- None really.
New drivers:
- AMD ISP411 "AMD ISP" driver.
- Exynos 2200 and 7870 SoC subdrivers.
- Sophgo RISC-V SG2042 and SG2044 subdrivers.
- Amlogic A4 subdriver.
- Rockchip RK3528 subdriver.
- Broadcom BCM21664 subdriver.
- Allwinner A523/T527 subdriver.
- Ingenic X1600 subdriver.
- Microchip SAMA7D65 subdriver, essentially a re-branded
Atmel AT91 PIO4 driver, but nowadays a Microschip SoC line.
Improvements:
- Bring in the devm_kmemdup_array() helper and use it throughout,
also bring in changes to other subsystems for this to establish
this helper.
- Support EGPIO on the Qualcomm SA8775P SoC.
- Extend EINT support in the Mediatek driver.
-----BEGIN PGP SIGNATURE-----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=iPMS
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Core changes:
- None really.
New drivers:
- AMD ISP411 "AMD ISP" driver
- Exynos 2200 and 7870 SoC subdrivers
- Sophgo RISC-V SG2042 and SG2044 subdrivers
- Amlogic A4 subdriver
- Rockchip RK3528 subdriver
- Broadcom BCM21664 subdriver
- Allwinner A523/T527 subdriver
- Ingenic X1600 subdriver
- Microchip SAMA7D65 subdriver, essentially a re-branded Atmel AT91
PIO4 driver, but nowadays a Microschip SoC line
Improvements:
- Bring in the devm_kmemdup_array() helper and use it throughout,
also bring in changes to other subsystems for this to establish
this helper
- Support EGPIO on the Qualcomm SA8775P SoC
- Extend EINT support in the Mediatek driver"
* tag 'pinctrl-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (101 commits)
pinctrl: mediatek: Add EINT support for multiple addresses
pinctrl: amlogic-a4: Drop surplus semicolon
pinctrl: nuvoton: Reduce use of OF-specific APIs
pinctrl: nuvoton: Convert to use struct group_desc
pinctrl: nuvoton: Make use of struct pinfunction and PINCTRL_PINFUNCTION()
pinctrl: nuvoton: Convert to use struct pingroup and PINCTRL_PINGROUP()
pinctrl: npcm8xx: Fix incorrect struct npcm8xx_pincfg assignment
pinctrl: tegra: Fix off by one in tegra_pinctrl_get_group()
pinctrl: PINCTRL_AMDISP should depend on DRM_AMD_ISP
pinctrl: qcom: sa8775p: Enable egpio function
dt-bindings: pinctrl: qcom: Add egpio function for sa8775p
pinctrl: qcom: tlmm-test: Validate irq_enable delivers edge irqs
pinctrl: qcom: Clear latched interrupt status when changing IRQ type
dt-bindings: pinctrl: airoha: Add missing gpio-ranges property
pinctrl: bcm281xx: Add missing assignment in bcm21664_pinctrl_lock_all()
pinctrl: amd: isp411: Fix IS_ERR() vs NULL check in probe()
dt-bindings: pinctrl: at91-pio4: add microchip,sama7d65-pinctrl
pinctrl: tegra: Set SFIO mode to Mux Register
pinctrl-tegra: Restore SFSEL bit when freeing pins
pinctrl: tegra: Add descriptions for SoC data fields
...
* Added core MFD driver.
* Added charger driver.
* Added devicetree bindings for the charger and MFD core.
* Added Haptic controller support via the input subsystem.
* Added LED support.
* Added support to simple-mfd-i2c for fuel gauge and hwmon.
* Samsung S2MPU05 (Exynos7870 PMIC):
* Added core MFD support.
* Added Regulator support for 21 LDOs and 5 BUCKs.
* Added devicetree bindings for regulators and the PMIC core.
* TI TPS65215 & TPS65214:
* Added support to the existing TPS65219 driver.
* Added devicetree bindings.
* STMicroelectronics STM32MP25:
* Added support to the stm32-timers MFD driver.
* Added devicetree bindings.
* Congatec Board Controller (CGBC):
* Added HWMON support for internal sensors.
* Added support for the conga-SA8 module.
* Microchip LAN969X:
* Enabled the at91-usart MFD driver for this architecture.
* MediaTek MT6359:
* Added mfd_cell for mt6359-accdet to allow its driver to probe.
* AXP20X (AXP717): Added AXP717_TS_PIN_CFG register to writeable
regs for temperature sensor configuration.
* SM501: Switched to using BIT() macro to mitigate potential
integer overflows in GPIO functions.
* ENE KB3930: Added a NULL pointer check for off_gpios during
probe to prevent potential dereference.
* SYSCON: Added a check for invalid resource size to prevent
issues from DT misconfiguration.
* CGBC: Corrected signedness issues in cgbc_session_request.
* intel_soc_pmic_chtdc_ti / intel_soc_pmic_crc: Removed unneeded
explicit assignment to REGCACHE_NONE.
* ipaq-micro / tps65010: Switched to using str_enable_disable()
helpers for clarity and potential size reduction.
* upboard-fpga: Removed unnecessary ACPI_PTR() annotation.
* max8997: Removed unused max8997_irq_exit() function, using
devm_* helpers instead.
* lp3943: Dropped unused #include <linux/pwm.h> from the header
file.
* db8500-prcmu: Removed needless return statements in void APIs.
* qnap-mcu: Replaced commas with semicolons between expressions
for correctness.
* STA2X11: Removed the core MFD driver as the underlying
platform support was removed.
* EZX-PCAP: Removed the unused pcap_adc_sync function.
* PCF50633 (OpenMoko PMIC): Removed the entire driver (core, adc,
gpio, irq) as the underlying s3c24xx platform support was removed.
* Converted fsl,mcu-mpc8349emitx binding to YAML.
* Added qcom,msm8937-tcsr compatible.
* Added microchip,sama7d65-flexcom compatible.
* Added rockchip,rk3528-qos syscon compatible.
* Added airoha,en7581-pbus-csr syscon compatible.
* Added microchip,sama7d65-ddr3phy syscon compatible.
* Added microchip,sama7d65-sfrbu syscon compatible.
-----BEGIN PGP SIGNATURE-----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=ntF1
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Maxim MAX77705:
- Added core MFD driver.
- Added charger driver.
- Added devicetree bindings for the charger and MFD core.
- Added Haptic controller support via the input subsystem.
- Added LED support.
- Added support to simple-mfd-i2c for fuel gauge and hwmon.
Samsung S2MPU05 (Exynos7870 PMIC):
- Added core MFD support.
- Added Regulator support for 21 LDOs and 5 BUCKs.
- Added devicetree bindings for regulators and the PMIC core.
TI TPS65215 & TPS65214:
- Added support to the existing TPS65219 driver.
- Added devicetree bindings.
STMicroelectronics STM32MP25:
- Added support to the stm32-timers MFD driver.
- Added devicetree bindings.
Congatec Board Controller (CGBC):
- Added HWMON support for internal sensors.
- Added support for the conga-SA8 module.
Microchip LAN969X:
- Enabled the at91-usart MFD driver for this architecture.
MediaTek MT6359:
- Added mfd_cell for mt6359-accdet to allow its driver to probe.
Other misc driver updates:
- AXP20X (AXP717): Added AXP717_TS_PIN_CFG register to writeable regs
for temperature sensor configuration.
- SM501: Switched to using BIT() macro to mitigate potential integer
overflows in GPIO functions.
- ENE KB3930: Added a NULL pointer check for off_gpios during probe
to prevent potential dereference.
- SYSCON: Added a check for invalid resource size to prevent issues
from DT misconfiguration.
- CGBC: Corrected signedness issues in cgbc_session_request
- intel_soc_pmic_chtdc_ti / intel_soc_pmic_crc: Removed unneeded
explicit assignment to REGCACHE_NONE.
- ipaq-micro / tps65010: Switched to using str_enable_disable()
helpers for clarity and potential size reduction.
- upboard-fpga: Removed unnecessary ACPI_PTR() annotation.
- max8997: Removed unused max8997_irq_exit() function, using devm_*
helpers instead.
- lp3943: Dropped unused #include <linux/pwm.h> from the header file.
- db8500-prcmu: Removed needless return statements in void APIs.
- qnap-mcu: Replaced commas with semicolons between expressions for
correctness.
- STA2X11: Removed the core MFD driver as the underlying platform
support was removed.
- EZX-PCAP: Removed the unused pcap_adc_sync function.
- PCF50633 (OpenMoko PMIC): Removed the entire driver (core, adc,
gpio, irq) as the underlying s3c24xx platform support was removed.
Devicetree updates:
- Converted fsl,mcu-mpc8349emitx binding to YAML
- Added qcom,msm8937-tcsr compatible
- Added microchip,sama7d65-flexcom compatible
- Added rockchip,rk3528-qos syscon compatible
- Added airoha,en7581-pbus-csr syscon compatible
- Added microchip,sama7d65-ddr3phy syscon compatible
- Added microchip,sama7d65-sfrbu syscon compatible"
* tag 'mfd-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (49 commits)
mfd: cgbc-core: Add support for conga-SA8
dt-bindings: mfd: syscon: Add microchip,sama7d65-sfrbu
dt-bindings: mfd: syscon: Add microchip,sama7d65-ddr3phy
mfd: cgbc: Add support for HWMON
dt-bindings: mfd: syscon: Add the pbus-csr node for Airoha EN7581 SoC
mfd: cgbc-core: Cleanup signedness in cgbc_session_request()
mfd: pcf50633: Remove remaining PCF50633 support
mfd: pcf50633: Remove unused platform IRQ code
mfd: pcF50633-gpio: Remove unused driver
mfd: pcf50633-adc: Remove unused driver
mfd: qnap-mcu: Convert commas to semicolons in qnap_mcu_exec()
mfd: mt6397-core: Add mfd_cell for mt6359-accdet
dt-bindings: mfd: syscon: Add rk3528 QoS register compatible
dt-bindings: mfd: atmel,sama5d2-flexcom: Add microchip,sama7d65-flexcom
mfd: ezx-pcap: Remove unused pcap_adc_sync
mfd: db8500-prcmu: Remove needless return in three void APIs
mfd: Remove STA2x11 core driver
mfd: max77620: Allow building as a module
mfd: ene-kb3930: Fix a potential NULL pointer dereference
dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8937
...
Drop parisc specific memcpy_fromio() function,
clean up coding style and fix compile warnings.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZ+faNwAKCRD3ErUQojoP
Xz7SAP91dhQNm/VEpRjODSu43CbQlsiCohCGfZRRRBaPaxIoIAEA5KUk9goheBMt
jL6kgYf8Lcxon83yBNd37bgvZssg/wc=
=NUvi
-----END PGP SIGNATURE-----
Merge tag 'parisc-for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
- drop parisc specific memcpy_fromio() function
- clean up coding style and fix compile warnings
* tag 'parisc-for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: led: Use scnprintf() to avoid string truncation warning
Input: gscps2 - Describe missing function parameters
parisc: perf: use named initializers for struct miscdevice
parisc: PDT: Fix missing prototype warning
parisc: Remove memcpy_fromio
parisc: Fix formatting errors in io.c
- several new device IDs added to xpad game controller driver
- support for imagis IST3038H variant of chip added to imagis touch
controller driver
- a fix for GPIO allocation for ads7846 touch controller driver
- a fix for iqs7222 driver to properly support status register
- a fix for goodix-berlin touch controller driver to use the right name
for the regulator
- more i8042 quirks to better handle several old Clevo devices.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZ9YmjwAKCRBAj56VGEWX
nPMXAP9DTIz200i04+sLoW6ZO7NiPUkJTw5AmBC64yXxWncUQQD/T5hue5JJBsJo
Me53HNUu+GiN923FB2dQEJdDvWOclwc=
=A/VU
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- several new device IDs added to xpad game controller driver
- support for imagis IST3038H variant of chip added to imagis touch
controller driver
- a fix for GPIO allocation for ads7846 touch controller driver
- a fix for iqs7222 driver to properly support status register
- a fix for goodix-berlin touch controller driver to use the right name
for the regulator
- more i8042 quirks to better handle several old Clevo devices.
* tag 'input-for-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
MAINTAINERS: Remove myself from the goodix touchscreen maintainers
Input: iqs7222 - preserve system status register
Input: i8042 - swap old quirk combination with new quirk for more devices
Input: i8042 - swap old quirk combination with new quirk for several devices
Input: i8042 - add required quirks for missing old boardnames
Input: i8042 - swap old quirk combination with new quirk for NHxxRZQ
Input: xpad - rename QH controller to Legion Go S
Input: xpad - add support for TECNO Pocket Go
Input: xpad - add support for ZOTAC Gaming Zone
Input: goodix-berlin - fix vddio regulator references
Input: goodix-berlin - fix comment referencing wrong regulator
Input: imagis - add support for imagis IST3038H
dt-bindings: input/touchscreen: imagis: add compatible for ist3038h
Input: xpad - add multiple supported devices
Input: xpad - add 8BitDo SN30 Pro, Hyperkin X91 and Gamesir G7 SE controllers
Input: ads7846 - fix gpiod allocation
Input: wdt87xx_i2c - fix compiler warning
Some register groups reserve a byte at the end of their continuous
address space. Depending on the variant of silicon, this field may
share the same memory space as the lower byte of the system status
register (0x10).
In these cases, caching the reserved byte and writing it later may
effectively reset the device depending on what happened in between
the read and write operations.
Solve this problem by avoiding any access to this last byte within
offending register groups. This method replaces a workaround which
attempted to write the reserved byte with up-to-date contents, but
left a small window in which updates by the device could have been
clobbered.
Now that the driver does not touch these reserved bytes, the order
in which the device's registers are written no longer matters, and
they can be written in their natural order. The new method is also
much more generic, and can be more easily extended to new variants
of silicon with different register maps.
As part of this change, the register read and write functions must
be gently updated to support byte access instead of word access.
Fixes: 2e70ef525b ("Input: iqs7222 - acknowledge reset before writing registers")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/Z85Alw+d9EHKXx2e@nixie71
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Avoid compiler warnings when building with W=1 by adding documentation for
the missing function parameters.
Signed-off-by: Helge Deller <deller@gmx.de>
Some older Clevo barebones have problems like no or laggy keyboard after
resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE
quirk.
We could not activly retest these devices because we no longer have them in
our archive, but based on the other old Clevo barebones we tested where the
new quirk had the same or a better behaviour I think it would be good to
apply it on these too.
Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20250221230137.70292-4-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some older Clevo barebones have problems like no or laggy keyboard after
resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE
quirk.
While the old quirk combination did not show negative effects on these
devices specifically, the new quirk works just as well and seems more
stable in general.
Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20250221230137.70292-3-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some older Clevo barebones have problems like no or laggy keyboard after
resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE
quirk.
The PB71RD keyboard is sometimes laggy after resume and the PC70DR, PB51RF,
P640RE, and PCX0DX_GN20 keyboard is sometimes unresponsive after resume.
This quirk fixes that.
Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20250221230137.70292-2-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some older Clevo barebones have problems like no or laggy keyboard after
resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE
quirk.
With the old i8042 quirks this devices keyboard is sometimes laggy after
resume. With the new quirk this issue doesn't happen.
Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20250221230137.70292-1-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The QH controller is actually the controller of the Legion Go S, with
the manufacturer string wch.cn and product name Legion Go S in its
USB descriptor. A cursory lookup of the VID reveals the same.
Therefore, rename the xpad entries to match.
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250222170010.188761-4-lkml@antheas.dev
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
TECNO Pocket Go is a kickstarter handheld by manufacturer TECNO Mobile.
It poses a unique feature: it does not have a display. Instead, the
handheld is essentially a pc in a controller. As customary, it has an
xpad endpoint, a keyboard endpoint, and a vendor endpoint for its
vendor software.
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250222170010.188761-3-lkml@antheas.dev
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
ZOTAC Gaming Zone is ZOTAC's 2024 handheld release. As it is common
with these handhelds, it uses a hybrid USB device with an xpad
endpoint, a keyboard endpoint, and a vendor-specific endpoint for
RGB control et al.
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250222170010.188761-2-lkml@antheas.dev
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
As per dt-bindings the property is called vddio-supply, so use the
correct name in the driver instead of iovdd. The datasheet also calls
the supply 'VDDIO'.
Fixes: 44362279bd ("Input: add core support for Goodix Berlin Touchscreen IC")
Cc: stable@vger.kernel.org
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250103-goodix-berlin-fixes-v1-2-b014737b08b2@fairphone.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In the statement above AVDD gets enabled, and not IOVDD, so fix this
copy-paste mistake.
Fixes: 44362279bd ("Input: add core support for Goodix Berlin Touchscreen IC")
Reported-by: Jens Reidel <adrian@travitia.xyz>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250103-goodix-berlin-fixes-v1-1-b014737b08b2@fairphone.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add support for imagis IST3038H, which seems mostly compatible with
IST3038C except that it reports a different chip ID value.
Tested on samsung,j5y17lte.
Signed-off-by: Andras Sebok <sebokandris2009@gmail.com>
Link: https://lore.kernel.org/r/20250224090354.102903-2-sebokandris2009@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Convert to use devm_kmemdup_array() which is more robust.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Convert to use devm_kmemdup_array() and while at it, use source size
instead of destination.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add support for haptic controller on MAX77705 Multifunction
device.
This driver supports external pwm and LRA (Linear Resonant Actuator) motor.
User can control the haptic device via force feedback framework.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250123-starqltechn_integration_upstream-v17-6-8b06685b6612@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
commit 767d83361a ("Input: ads7846 - Convert to use software nodes")
has simplified the code but accidentially converted a devm_gpiod_get()
to gpiod_get(). This leaves the gpio reserved on module remove and the
driver can no longer be loaded again.
Fixes: 767d83361a ("Input: ads7846 - Convert to use software nodes")
Cc: stable@vger.kernel.org
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/6e9b143f19cdfda835711a8a7a3966e5a2494cff.1738410204.git.hns@goldelico.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Highlights:
- acer-wmi:
- Add support for PH14-51, PH16-72, and Nitro AN515-58
- Add proper hwmon support
- Improve error handling when reading "gaming system info"
- Replace direct EC reads for the current platform profile
with WMI calls to handle EC address variations
- Replace custom platform_profile cycling with the generic one
- ACPI: platform_profile: Major refactoring and improvements
- Support registering multiple platform_profile handlers
concurrently to avoid the need to quirk which handler takes
precedence
- Support reporting "custom" profile for cases where the current
profile is ambiguous or when settings tweaks are done outside
the pre-defined profile
- Abstract and layer platform_profile API better using the
class_dev and drvdata
- Various minor improvements
- Add Documentation and kerneldoc
- amd/hsmp: Add support for HSMP protocol v7
- amd/pmc:
- Support AMD 1Ah family 70h
- Support STB with Ryzen desktop SoCs
- amd/pmf:
- Support Custom BIOS inputs for PMF TA
- Support passing SRA sensor data from AMD SFH (HID) to PMF TA
- dell-smo8800:
- Move SMO88xx quirk away from the generic i2c-i801 driver
- Add accelerometer support for Dell Latitude E6330/E6430 and
XPS 9550
- Support probing accelerometer for models yet to be listed in
the DMI mapping table because ACPI lacks i2c-address for the
accelerometer (behind a module parameter because probing might
be dangerous)
- HID: amd_sfh: Add support for exporting SRA sensor data
- hp-wmi: Add fan and thermal support for Victus 16-s1000
- input: Add key for phone linking
- input: i8042: Add context for the i8042 filter to enable cleaning up
the filter related global variables from pdx86 drivers
- lenovo-wmi-camera: Use SW_CAMERA_LENS_COVER instead of
KEY_CAMERA_ACCESS
- mellanox: mlxbf-pmc:
- Add support for monitoring cycle count
- Add Documentation
- thinkpad_acpi: Add support for phone link key
- tools/power/x86/intel-speed-select: Fix Turbo Ratio Limit restore
- x86-android-tables: Add support for Vexia EDU ATLA 10 Bluetooth and
EC battery driver
- Miscellaneous cleanups / refactoring / improvements
The following is an automated shortlog grouped by driver:
acer-wmi:
- add support for Acer Nitro AN515-58
- Add support for Acer PH14-51
- Add support for Acer Predator PH16-72
- Fix initialization of last_non_turbo_profile
- Ignore AC events
- Implement proper hwmon support
- Improve error handling when reading gaming system information
- Rename ACER_CAP_FAN_SPEED_READ
- simplify platform profile cycling
- use an ACPI bitmap to set the platform profile choices
- Use devm_platform_profile_register()
- use new helper function for setting overclocks
- use WMI calls for platform profile handling
ACPI: platform-profile:
- Add a name member to handlers
ACPI: platform_profile:
- Add a prefix to log messages
- Add choices attribute for class interface
- Add concept of a "custom" profile
- Add device pointer into platform profile handler
- Add devm_platform_profile_register()
- Add documentation
- Add name attribute to class interface
- Add `ops` member to handlers
- Add platform handler argument to platform_profile_remove()
- Add `probe` to platform_profile_ops
- Add profile attribute for class interface
- Allow multiple handlers
- Check all profile handler to calculate next
- Clean platform_profile_handler
- Create class for ACPI platform profile
- Let drivers set drvdata to the class device
- Make sure all profile handlers agree on profile
- Move matching string for new profile out of mutex
- Move platform_profile_handler
- Move sanity check out of the mutex
- Notify change events on register and unregister
- Notify class device from platform_profile_notify()
- Only show profiles common for all handlers
- Pass the profile handler into platform_profile_notify()
- Remove platform_profile_handler from callbacks
- Remove platform_profile_handler from exported symbols
- Replace *class_dev member with class_dev
- Use guard(mutex) for register/unregister
- Use `scoped_cond_guard`
alienware_wmi:
- General cleanup of WMAX methods
alienware-wmi:
- Improve hdmi_mux, amplifier and deepslp group creation
- Improve rgb-zones group creation
- Modify parse_rgb() signature
- Move Lighting Control State
- Remove unnecessary check at module exit
- Use devm_platform_profile_register()
amd/hsmp:
- Add support for HSMP protocol version 7 messages
- Constify 'struct bin_attribute'
amd/pmc:
- Add STB support for AMD Desktop variants
- Define enum for S2D/PMC msg_port and add helper function
- Isolate STB code changes to a new file
- Move STB block into amd_pmc_s2d_init()
- Move STB functionality to a new file for better code organization
- Update function names to align with new STB file
- Update IP information structure for newer SoCs
- Update S2D message id for 1Ah Family 70h model
- Use ARRAY_SIZE() to fill num_ips information
amd: pmc:
- Use guard(mutex)
amd: pmf:
- Drop all quirks
amd/pmf:
- Enable Custom BIOS Inputs for PMF-TA
- Get SRA sensor data from AMD SFH driver
amd: pmf: sps:
- Use devm_platform_profile_register()
amd: pmf:
- Switch to guard(mutex)
asus-wmi:
- Use devm_platform_profile_register()
dell: dcdbas:
- Constify 'struct bin_attribute'
dell: dell-pc:
- Create platform device
dell-pc:
- Use devm_platform_profile_register()
dell_rbu:
- Constify 'struct bin_attribute'
dell-smo8800:
- Add a couple more models to lis3lv02d_devices[]
- Add support for probing for the accelerometer i2c address
- Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-lis3lv02d
- Move SMO88xx acpi_device_ids to dell-smo8800-ids.h
dell-sysman:
- Directly use firmware_attributes_class
dell-uart-backlight:
- Use blacklight power constant
docs: platform/x86: wmi:
- mention tool for invoking WMI methods
Documentation/ABI:
- Add document for Mellanox PMC driver
- Add new sysfs field to sysfs-platform-mellanox-pmc
Documentation:
- Add documentation about class interface for platform profiles
firmware_attributes_class:
- Drop lifecycle functions
- Move include linux/device/class.h
- Simplify API
fujitsu-laptop:
- replace strcpy -> strscpy
HID: amd_sfh:
- Add support to export device operating states
hp-bioscfg:
- Directly use firmware_attributes_class
hp-wmi:
- Add fan and thermal profile support for Victus 16-s1000
- Use devm_platform_profile_register()
ideapad-laptop:
- Use devm_platform_profile_register()
Input:
- allocate keycode for phone linking
- i8042 - Add support for platform filter contexts
inspur_platform_profile:
- Use devm_platform_profile_register()
int3472:
- Check for adev == NULL
- Debug log the sensor name
- Fix skl_int3472_handle_gpio_resources() return value
- Make "pin number mismatch" message a debug message
intel: bytcrc_pwrsrc:
- fix power_supply dependency
- Optionally register a power_supply dev
intel: int0002_vgpio:
- Make the irqchip immutable
intel/pmt:
- Constify 'struct bin_attribute'
intel: punit_ipc:
- Remove unused function
intel/sdsi:
- Constify 'struct bin_attribute'
intel/tpmi/plr:
- Make char[] longer to silence warning
lenovo-wmi-camera:
- Use SW_CAMERA_LENS_COVER instead of KEY_CAMERA_ACESS
MAINTAINERS:
- Change AMD PMC driver status to "Supported"
mlxbf-bootctl:
- Constify 'struct bin_attribute'
- use sysfs_emit() instead of sprintf()
mlxbf-pmc:
- Add support for clock_measure performance block
- Add support for monitoring cycle count
- incorrect type in assignment
mlxreg-hotplug:
- use sysfs_emit() instead of sprintf()
mlxreg-io:
- use sysfs_emit() instead of sprintf()
quickstart:
- don't include 'pm_wakeup.h' directly
serdev_helpers:
- Add get_serdev_controller_from_parent() helper
- Check for serial_ctrl_uid == NULL
surface: surface_platform_profile:
- Use devm_platform_profile_register()
think-lmi:
- Directly use firmware_attributes_class
thinkpad_acpi:
- Add support for new phone link hotkey
thinkpad-acpi:
- replace strcpy with strscpy
thinkpad_acpi:
- Use devm_platform_profile_register()
tools/power/x86/intel-speed-select:
- Fix TRL restore after SST-TF disable
- v1.21 release
wmi-bmof:
- Make use of .bin_size() callback
x86-android-tablets:
- Add Bluetooth support for Vexia EDU ATLA 10
- Add missing __init to get_i2c_adap_by_*()
- Add support for getting serdev-controller by PCI parent
- Add Vexia EDU ATLA 10 EC battery driver
- Change x86_instantiate_serdev() prototype
- make platform data be static
- Make variables only used locally static
- Store serdev-controller ACPI HID + UID in a union
Merges:
- Merge branch 'fixes' into 'for-next'
- Merge branch 'intel-sst' of https://github.com/spandruvada/linux-kernel into review-ilpo-next
- Merge branch 'platform-drivers-x86-platform-profile' into for-next
- Merge branch 'platform-drivers-x86-platform-profile' into for-next
- Merge import NS conversion from 'https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git' into for-next
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZ5JDNAAKCRBZrE9hU+XO
MT3AAP9YSYaWZUEgV9T/De2C/ksx0XfmHULmtQHccMgqIsIxmAEAmsBOHsDozPuZ
9F2IbT4uBuQo2iwbGq0DhVd+N36kEQw=
=Vz0C
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
"acer-wmi:
- Add support for PH14-51, PH16-72, and Nitro AN515-58
- Add proper hwmon support
- Improve error handling when reading "gaming system info"
- Replace direct EC reads for the current platform profile with WMI
calls to handle EC address variations
- Replace custom platform_profile cycling with the generic one
ACPI:
- platform_profile: Major refactoring and improvements
- Support registering multiple platform_profile handlers concurrently
to avoid the need to quirk which handler takes precedence
- Support reporting "custom" profile for cases where the current
profile is ambiguous or when settings tweaks are done outside the
pre-defined profile
- Abstract and layer platform_profile API better using the class_dev
and drvdata
- Various minor improvements
- Add Documentation and kerneldoc
amd/hsmp:
- Add support for HSMP protocol v7
amd/pmc:
- Support AMD 1Ah family 70h
- Support STB with Ryzen desktop SoCs
amd/pmf:
- Support Custom BIOS inputs for PMF TA
- Support passing SRA sensor data from AMD SFH (HID) to PMF TA
dell-smo8800:
- Move SMO88xx quirk away from the generic i2c-i801 driver
- Add accelerometer support for Dell Latitude E6330/E6430 and XPS
9550
- Support probing accelerometer for models yet to be listed in the
DMI mapping table because ACPI lacks i2c-address for the
accelerometer (behind a module parameter because probing might be
dangerous)
HID:
- amd_sfh: Add support for exporting SRA sensor data
hp-wmi:
- Add fan and thermal support for Victus 16-s1000
input:
- Add key for phone linking
- i8042: Add context for the i8042 filter to enable cleaning up the
filter related global variables from pdx86 drivers
lenovo-wmi-camera:
- Use SW_CAMERA_LENS_COVER instead of KEY_CAMERA_ACCESS
mellanox mlxbf-pmc:
- Add support for monitoring cycle count
- Add Documentation
thinkpad_acpi:
- Add support for phone link key
tools/power/x86/intel-speed-select:
- Fix Turbo Ratio Limit restore
x86-android-tables:
- Add support for Vexia EDU ATLA 10 Bluetooth and EC battery driver
And miscellaneous cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (133 commits)
platform/x86: acer-wmi: Fix initialization of last_non_turbo_profile
platform/x86: acer-wmi: Ignore AC events
platform/mellanox: mlxreg-io: use sysfs_emit() instead of sprintf()
platform/mellanox: mlxreg-hotplug: use sysfs_emit() instead of sprintf()
platform/mellanox: mlxbf-bootctl: use sysfs_emit() instead of sprintf()
platform/x86: hp-wmi: Add fan and thermal profile support for Victus 16-s1000
ACPI: platform_profile: Add a prefix to log messages
ACPI: platform_profile: Add documentation
ACPI: platform_profile: Clean platform_profile_handler
ACPI: platform_profile: Move platform_profile_handler
ACPI: platform_profile: Remove platform_profile_handler from exported symbols
platform/x86: thinkpad_acpi: Use devm_platform_profile_register()
platform/x86: inspur_platform_profile: Use devm_platform_profile_register()
platform/x86: hp-wmi: Use devm_platform_profile_register()
platform/x86: ideapad-laptop: Use devm_platform_profile_register()
platform/x86: dell-pc: Use devm_platform_profile_register()
platform/x86: asus-wmi: Use devm_platform_profile_register()
platform/x86: amd: pmf: sps: Use devm_platform_profile_register()
platform/x86: acer-wmi: Use devm_platform_profile_register()
platform/surface: surface_platform_profile: Use devm_platform_profile_register()
...
- more conversions to the guard notation in the input core
- a fix for NXP BBNSM power key driver to clean up wake IRQ after
unbinding
- several new vendor/device ID pairs added to xpad game controller
driver
- several drivers switched to using str_enable_disable and similar
helpers instead of open-coding
- add mapping for F23 to atkbd driver so that MS "Copilot" key shortcut
works out of the box (if userspace is ready to handle it)
- evbug input handler has been removed (debugging through evdev is
strongly preferred to dumping all events into the kernel log).
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZ5ABwgAKCRBAj56VGEWX
nColAQDdu5HPbyeF6ZU6/BqTO1ZhBbcSnaXyDRT0jv0qp0UlQAEA+zc0EPBtx8jE
RumALncq1FZkjHpPDUUmlIrTdiFM4gA=
=whWY
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.14-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- more conversions to the guard notation in the input core
- a fix for NXP BBNSM power key driver to clean up wake IRQ after
unbinding
- several new vendor/device ID pairs added to xpad game controller
driver
- several drivers switched to using str_enable_disable and similar
helpers instead of open-coding
- add mapping for F23 to atkbd driver so that MS "Copilot" key shortcut
works out of the box (if userspace is ready to handle it)
- evbug input handler has been removed (debugging through evdev is
strongly preferred to dumping all events into the kernel log).
* tag 'input-for-v6.14-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (22 commits)
Input: synaptics - fix crash when enabling pass-through port
Input: atkbd - map F23 key to support default copilot shortcut
Input: xpad - add support for Nacon Evol-X Xbox One Controller
Input: xpad - add unofficial Xbox 360 wireless receiver clone
Input: xpad - add support for wooting two he (arm)
Input: xpad - improve name of 8BitDo controller 2dc8:3106
Input: xpad - add QH Electronics VID/PID
Input: joystick - use str_off_on() helper in sw_connect()
Input: Use str_enable_disable-like helpers
Input: use guard notation in input core
Input: poller - convert locking to guard notation
Input: mt - make use of __free() cleanup facility
Input: mt - convert locking to guard notation
Input: ff-memless - make use of __free() cleanup facility
Input: ff-memless - convert locking to guard notation
Input: ff-core - make use of __free() cleanup facility
Input: ff-core - convert locking to guard notation
Input: remove evbug driver
Input: mma8450 - add chip ID check in probe
Input: bbnsm_pwrkey - add remove hook
...
As reported by the kernel test robot, the following warning occur:
>> drivers/input/touchscreen/wdt87xx_i2c.c:1166:36: warning: 'wdt87xx_acpi_id' defined but not used [-Wunused-const-variable=]
1166 | static const struct acpi_device_id wdt87xx_acpi_id[] = {
| ^~~~~~~~~~~~~~~
The 'wdt87xx_acpi_id' array is only used when CONFIG_ACPI is enabled.
Wrapping its definition and 'MODULE_DEVICE_TABLE' in '#ifdef CONFIG_ACPI'
prevents a compiler warning when ACPI is disabled.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501181549.uzdlBwuN-lkp@intel.com/
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Link: https://lore.kernel.org/r/20250119084312.1851486-1-eleanor15x@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When enabling a pass-through port an interrupt might come before psmouse
driver binds to the pass-through port. However synaptics sub-driver
tries to access psmouse instance presumably associated with the
pass-through port to figure out if only 1 byte of response or entire
protocol packet needs to be forwarded to the pass-through port and may
crash if psmouse instance has not been attached to the port yet.
Fix the crash by introducing open() and close() methods for the port and
check if the port is open before trying to access psmouse instance.
Because psmouse calls serio_open() only after attaching psmouse instance
to serio port instance this prevents the potential crash.
Reported-by: Takashi Iwai <tiwai@suse.de>
Fixes: 100e16959c ("Input: libps2 - attach ps2dev instances as serio port's drvdata")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1219522
Cc: stable@vger.kernel.org
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/Z4qSHORvPn7EU2j1@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Microsoft defined Meta+Shift+F23 as the Copilot shortcut instead of a
dedicated keycode, and multiple vendors have their keyboards emit this
sequence in response to users pressing a dedicated "Copilot" key.
Unfortunately the default keymap table in atkbd does not map scancode
0x6e (F23) and so the key combination does not work even if userspace
is ready to handle it.
Because this behavior is common between multiple vendors and the
scancode is currently unused map 0x6e to keycode 193 (KEY_F23) so that
key sequence is generated properly.
MS documentation for the scan code:
https://learn.microsoft.com/en-us/windows/win32/inputdev/about-keyboard-input#scan-codes
Confirmed on Lenovo, HP and Dell machines by Canonical.
Tested on Lenovo T14s G6 AMD.
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250107034554.25843-1-mpearson-lenovo@squebb.ca
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Although it mimics the Microsoft's VendorID, it is in fact a clone.
Taking into account that the original Microsoft Receiver is not being
manufactured anymore, this drive can solve dpad issues encontered by
those who still use the original 360 Wireless controller
but are using a receiver clone.
Signed-off-by: Nilton Perim Neto <niltonperimneto@gmail.com>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Link: https://lore.kernel.org/r/20250107192830.414709-12-rojtberg@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
8BitDo Pro 2 Wired Controller shares the same USB identifier
(2dc8:3106) as a different device, so amend name to reflect that and
reduce confusion as the user might think the controller was misdetected.
Because Pro 2 Wired will not work in XTYPE_XBOXONE mode (button presses
won't register), tagging it as XTYPE_XBOX360 remains appropriate.
Signed-off-by: Leonardo Brondani Schenkel <leonardo@schenkel.net>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Link: https://lore.kernel.org/r/20250107192830.414709-2-rojtberg@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Currently the platform filter cannot access any driver-specific state
which forces drivers installing a i8042 filter to have at least some
kind of global pointer for their filter.
Allow callers of i8042_install_filter() to submit a context pointer
which is then passed to the i8042 filter. This frees drivers from the
responsibility of having to manage this global pointer themself.
Also introduce a separate type for the i8042 filter (i8042_filter_t)
so that the function definitions can stay compact.
Tested on a Dell Inspiron 3505.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250113221314.435812-1-W_Armin@gmx.de
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read. Ternary
operator has three arguments and with wrapping might lead to quite
long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
file.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250114192701.912430-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Switch input core to use "guard" notation when acquiring spinlocks and
mutexes to simplify the code and ensure that locks are automatically
released when control leaves critical section.
Link: https://lore.kernel.org/r/20241107071538.195340-9-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Annotate allocated memory with __free(kfree) to simplify the code and
make sure memory is released appropriately.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20241107071538.195340-5-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Annotate allocated memory with __free(kfree) to simplify the code and
make sure memory is released appropriately.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20241107071538.195340-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use guard() and scoped_guard() notation instead of explicitly acquiring
and releasing spinlocks and mutexes to simplify the code and ensure that
all locks are released properly.
Link: https://lore.kernel.org/r/20241107071538.195340-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
I've never heard of anyone having used this driver for debugging at least
in over past decade or so. Since we have tools like evtest, this driver
seems to be rather superficial.
Also, it apparently causes confusion among people who accidentaly enable
CONFIG_INPUT_EVBUG and are annoyed/confused by their kernel log being
spammed by a lot of useless data.
Let's just remove it.
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Link: https://lore.kernel.org/r/8n377s5p-3r9n-ro38-3r2o-p536745552qo@xreary.bet
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Prevent continuous polling error logs by adding a chip ID check in the
probe function. This ensures the driver only proceeds when the mma8450 is
present, avoiding issues in scenarios like missing add-on cards.
Signed-off-by: Luwei Zhou <b45643@freescale.com>
Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20241216173205.211058-1-Frank.Li@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The MCU controls the power-button and beeper, so expose them as input
device. There is of course no interrupt line, so the status of the
power-button needs to be polled. To generate an event the power-button
also needs to be held for 1-2 seconds, so the polling interval does
not need to be overly fast.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20241107114712.538976-7-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
Without remove hook to clear wake irq, there will be kernel dump when
doing module test.
"bbnsm_pwrkey 44440000.bbnsm:pwrkey: wake irq already initialized"
Add remove hook to clear wake irq and set wakeup to false.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Fixes: 40e40fdfec ("Input: bbnsm_pwrkey - add bbnsm power key support")
Link: https://lore.kernel.org/r/20241212030322.3110017-1-peng.fan@oss.nxp.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add Nacon Pro Compact to the list of supported devices. These are the
ids of the "Colorlight" variant. The buttons, sticks and vibrations
work. The decorative LEDs on the other hand do not (they stay turned
off).
Signed-off-by: Nicolas Nobelis <nicolas@nobelis.eu>
Link: https://lore.kernel.org/r/20241116182419.33833-1-nicolas@nobelis.eu
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- support for NT36672A touchscreen added to novatek-nvt-ts driver
- a change to ads7846 driver to prevent XPT2046 from locking up
- a change switching platform input dirves back to using remove() method
(from remove_new())
- updates to a number of input drivers to use the new cleanup facilities
(__free(...), guard(), and scoped-guard()) which ensure that the
resources and locks are released properly and automatically
- other assorted driver cleanups and fixes.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZ0PQIAAKCRBAj56VGEWX
nDFFAQCSj3Va9Y6ZgNFvjmPAoA3RmsrvydXMG6PuyHEEfvTtpgD9GPldve3MRqRr
VcrLJXMgyX2+RgpKm1W9ZQgK9Nudegs=
=Ry7d
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.13-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for NT36672A touchscreen added to novatek-nvt-ts driver
- a change to ads7846 driver to prevent XPT2046 from locking up
- a change switching platform input dirves back to using remove()
method (from remove_new())
- updates to a number of input drivers to use the new cleanup
facilities (__free(...), guard(), and scoped-guard()) which ensure
that the resources and locks are released properly and automatically
- other assorted driver cleanups and fixes.
* tag 'input-for-v6.13-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (109 commits)
Input: mpr121 - use devm_regulator_get_enable_read_voltage()
Input: sun4i-lradc-keys - don't include 'pm_wakeup.h' directly
Input: spear-keyboard - don't include 'pm_wakeup.h' directly
Input: cypress-sf - constify struct i2c_device_id
Input: ads7846 - increase xfer array size in 'struct ser_req'
Input: fix the input_event struct documentation
Input: i8042 - fix typo dublicate to duplicate
Input: ads7846 - add dummy command register clearing cycle
Input: cs40l50 - fix wrong usage of INIT_WORK()
Input: introduce notion of passive observers for input handlers
Input: maple_keyb - use guard notation when acquiring mutex
Input: locomokbd - use guard notation when acquiring spinlock
Input: hilkbd - use guard notation when acquiring spinlock
Input: synaptics-rmi4 - switch to using cleanup functions in F34
Input: synaptics - fix a typo
dt-bindings: input: rotary-encoder: Fix "rotary-encoder,rollover" type
Input: omap-keypad - use guard notation when acquiring mutex
Input: imagis - fix warning regarding 'imagis_3038_data' being unused
Input: userio - remove unneeded semicolon
Input: sparcspkr - use cleanup facility for device_node
...
Linus Torvalds
Jeff LaBundy
Helge Deller
Werner Sembach
Antheas Kapenekakis
Luca Weiss
Andras Sebok
Raag Jadav
Dzmitry Sankouski
Pavel Rojtberg
Nilton Perim Neto
H. Nikolaus Schaller
Yu-Chun Lin
Dmitry Torokhov
Mark Pearson
Matheos Mattsson
Jack Greiner
Leonardo Brondani Schenkel
Pierre-Loup A. Griffais
Armin Wolf
Thorsten Blum
Krzysztof Kozlowski
Jiri Kosina
Luwei Zhou
Heiko Stuebner
Peng Fan
Nicolas Nobelis