Change order of properties in order for the end user to hopefully ignore
pmin-pascal and pmax-pascal which are superseded by pressure-triplet.
Add pressure-triplet property which automatically initializes
pmin-pascal and pmax-pascal inside the driver.
Rework honeywell,pmXX-pascal requirements based on feedback from
Jonathan and Conor.
Co-developed-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231229092445.30180-3-petre.rodan@subdimension.ro
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Define enum inside the honeywell,transfer-function property block.
Set the correct irq edge in the example block.
Based on the datasheet, in table 13 on page 11:
"End-of-conversion indicator: This pin is set high when a measurement
and calculation have been completed and the data is ready to be
clocked out"
Add description on End-of-conversion interrupt.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Co-developed-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Link: https://lore.kernel.org/r/20231229092445.30180-2-petre.rodan@subdimension.ro
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This device has the same properties and I2C addresses as the as73211.
The only difference between them is the photodiodes they use internally,
which in this case is irrelevant for the bindings.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
- A fix for the idle and iowait time accounting vs. CPU hotplug.
The time is reset on CPU hotplug which makes the accumulated
systemwide time jump backwards.
- Assorted fixes and improvements for clocksource/event drivers
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmWtTLgTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoUXiD/4uN4Ntps8TwxSdg1X11M6++rizg9q9
EmIfwWcfQQJDM5Ss5FE88ye55NxIOwJ1brYo08+yTAXjnnZ/yNP1BBegHbMNiGil
NCHye7tYKZle25+hErdgfBB9n6brPz7dPOvV04/wRRWW+9p2ejt/5nEvojkyco9Y
S9KgBCxkvUqScMbdKKFW1UsThWh2euxwQXRGiWhTPPkbKcVynPvQJjvVyRxn01NS
eEhTn8YUNcAPT+1YApouGXrSCxo/IzBJ36CxOoCoUfaXcJ6FG1LLeAjNxKZ26Dfs
Ah0e3Hhyv6KOsBvBNwwabXDwryd6L8rZd8yL2KakI1vIC51uS2wneFy8GCieDVGh
xmy3U/tfkS0L7pmN+dQW2l4k9PHRNrwvbISKhs0UAHSOgGIMHZcjE6aFbYKru5i4
1W+dEjiktlceZ94mrEHbLpKmxWH2z5P8m0BzUs4kt3nkaOf6CTUKqa/qdAiU5dv+
lovKT26L8HBrMXf48I70UpgW/bYzOUGk55sR6hiLTXAelz1z02D1uYHFkshc0NCO
/O4wvHcgvMM46CtWVbim42AlRcyyWCr+FrY+jvfiG2icOcHPLqc81iHL8EKj7pJl
IxLgyPHVckgnE5gx+GQ8aDkg/qwCZnj4rFWgub8QMYtjI+pO+9T9kPAYPCxFhP7J
gmcJxZAB2RnKXA==
=RD6E
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Updates for time and clocksources:
- A fix for the idle and iowait time accounting vs CPU hotplug.
The time is reset on CPU hotplug which makes the accumulated
systemwide time jump backwards.
- Assorted fixes and improvements for clocksource/event drivers"
* tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug
clocksource/drivers/ep93xx: Fix error handling during probe
clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings
clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings
clocksource/timer-riscv: Add riscv_clock_shutdown callback
dt-bindings: timer: Add StarFive JH8100 clint
dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs
-----BEGIN PGP SIGNATURE-----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=vwnz
-----END PGP SIGNATURE-----
Merge tag 'v6.8-rc-part2-smb-client' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client updates from Steve French:
"Various smb client fixes, including multichannel and for SMB3.1.1
POSIX extensions:
- debugging improvement (display start time for stats)
- two reparse point handling fixes
- various multichannel improvements and fixes
- SMB3.1.1 POSIX extensions open/create parsing fix
- retry (reconnect) improvement including new retrans mount parm, and
handling of two additional return codes that need to be retried on
- two minor cleanup patches and another to remove duplicate query
info code
- two documentation cleanup, and one reviewer email correction"
* tag 'v6.8-rc-part2-smb-client' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update iface_last_update on each query-and-update
cifs: handle servers that still advertise multichannel after disabling
cifs: new mount option called retrans
cifs: reschedule periodic query for server interfaces
smb: client: don't clobber ->i_rdev from cached reparse points
smb: client: get rid of smb311_posix_query_path_info()
smb: client: parse owner/group when creating reparse points
smb: client: fix parsing of SMB3.1.1 POSIX create context
cifs: update known bugs mentioned in kernel docs for cifs
cifs: new nt status codes from MS-SMB2
cifs: pick channel for tcon and tdis
cifs: open_cached_dir should not rely on primary channel
smb3: minor documentation updates
Update MAINTAINERS email address
cifs: minor comment cleanup
smb3: show beginning time for per share stats
cifs: remove redundant variable tcon_exist
This includes everything from part 2:
* Support for tuning for systems with fast misaligned accesses.
* Support for SBI-based suspend.
* Support for the new SBI debug console extension.
* The T-Head CMOs now use PA-based flushes.
* Support for enabling the V extension in kernel code.
* Optimized IP checksum routines.
* Various ftrace improvements.
* Support for archrandom, which depends on the Zkr extension.
and then also a fix for those:
* The build is no longer broken under NET=n, KUNIT=y for ports that
don't define their own ipv6 checksum.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmWsCOMTHHBhbG1lckBk
YWJiZWx0LmNvbQAKCRAuExnzX7sYieQND/0f+1gizTM0OzuqZG9+DOdWTtqmILyr
sZaYXWBw6SPzbUSlwjoW4Qp/S3Ur7IhrbfttM2aMoS4GHZvSESAXOMXC4c7AnCaQ
HOXBC2OuXvq6jA0ZjK5XPviR70A/7uD2iu5SNO1hyfJK08LSEu+AulxtkW50+wMc
bHXSpZxEf8AtwOJK1cRtwhH4qy+Qcs3Nla3jG7OnDsPbhJVcydHx95eCtfwn2cQA
KwJPN1fjRtm4ALZb91QcMDO8VAoanfPEkSR3DoNVE/UfdTItYk35VHmf4RWh7IWA
qDnV5Mp/XMX2RmJqwi1ZmSHHX0rfVLL5UqgBhGHC8PuMpLJn5p9U6DZ0qD7YWxcB
NDlrHsaXt112RHEEM/7CcLkqEexua/ezcC45E5tSQ4sRDZE3fvgbALao67xSQ22D
lCpVAY0Z3o5oWaM/jISiQHjSNn5RrAwEYSvvv2pkW4QAMShA2eggmQaCF+Jl4EMp
u6yqJpXxDI99C088uvM6Bi2gcX8fnBSmOzCB/sSU4a1I72UpWrGngqUpTYKHG8Jz
cTZhbIKmQirBP0vC/UgMOS0sNuw/NykItfRXZ2g0qGKvw1TjJ6djdeZBKcAj3h0E
fJpMxuhmeOFYE7DavnhSt3CResFTXZzXLChjxGbT+g10YzVEf9g7vBVnjxAwad9f
tryMVpL/ipGpQQ==
=Sjhj
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.8-mw4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Support for tuning for systems with fast misaligned accesses.
- Support for SBI-based suspend.
- Support for the new SBI debug console extension.
- The T-Head CMOs now use PA-based flushes.
- Support for enabling the V extension in kernel code.
- Optimized IP checksum routines.
- Various ftrace improvements.
- Support for archrandom, which depends on the Zkr extension.
- The build is no longer broken under NET=n, KUNIT=y for ports that
don't define their own ipv6 checksum.
* tag 'riscv-for-linus-6.8-mw4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (56 commits)
lib: checksum: Fix build with CONFIG_NET=n
riscv: lib: Check if output in asm goto supported
riscv: Fix build error on rv32 + XIP
riscv: optimize ELF relocation function in riscv
RISC-V: Implement archrandom when Zkr is available
riscv: Optimize hweight API with Zbb extension
riscv: add dependency among Image(.gz), loader(.bin), and vmlinuz.efi
samples: ftrace: Add RISC-V support for SAMPLE_FTRACE_DIRECT[_MULTI]
riscv: ftrace: Add DYNAMIC_FTRACE_WITH_DIRECT_CALLS support
riscv: ftrace: Make function graph use ftrace directly
riscv: select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY
lib/Kconfig.debug: Update AS_HAS_NON_CONST_LEB128 comment and name
riscv: Restrict DWARF5 when building with LLVM to known working versions
riscv: Hoist linker relaxation disabling logic into Kconfig
kunit: Add tests for csum_ipv6_magic and ip_fast_csum
riscv: Add checksum library
riscv: Add checksum header
riscv: Add static key for misaligned accesses
asm-generic: Improve csum_fold
RISC-V: selftests: cbo: Ensure asm operands match constraints
...
- Fix shadow call stack patching with LTO=full
- Fix voluntary preemption of the FPSIMD registers from assembly code
- Fix workaround for A520 CPU erratum #2966298 and extend to A510
- Fix SME issues that resulted in corruption of the register state
- Minor fixes (missing includes, formatting)
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmWqUgEQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNB+7B/0VDHq2F8KtOhW02XqcKJaqiDk8QggTZn0D
3JxZs6P6y9KP88xa6gr3G+PzLYjKV66aP871oKPECtsQAAIJzMUfhB7C7+zJzxPL
kxrP3fTCwGUUkBlH7+dhyoX4hmV174c0xp70vp/2+hG5IixwtpFVi4284pgU6RcC
El6LH0UrRiHUI7oP5vLArk3vp1X8yFXxGRCeFCmP9mOBB4Auf9q5F0YoESPz0LBS
ohb9L8vZw1eBYJxoSNiGo819FX4Q2nximR75byLYMB1+M0wlqFo1Or/AbfpZGPzY
q5plHckTU25NxPEMWVvzXlu/O1gBkAfsWcxb0TIDpVWGDrL1+6Qm
=9pba
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"I think the main one is fixing the dynamic SCS patching when full LTO
is enabled (clang was silently getting this horribly wrong), but it's
all good stuff.
Rob just pointed out that the fix to the workaround for erratum
#2966298 might not be necessary, but in the worst case it's harmless
and since the official description leaves a little to be desired here,
I've left it in.
Summary:
- Fix shadow call stack patching with LTO=full
- Fix voluntary preemption of the FPSIMD registers from assembly code
- Fix workaround for A520 CPU erratum #2966298 and extend to A510
- Fix SME issues that resulted in corruption of the register state
- Minor fixes (missing includes, formatting)"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Fix silcon-errata.rst formatting
arm64/sme: Always exit sme_alloc() early with existing storage
arm64/fpsimd: Remove spurious check for SVE support
arm64/ptrace: Don't flush ZA/ZT storage when writing ZA via ptrace
arm64: entry: simplify kernel_exit logic
arm64: entry: fix ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
arm64: errata: Add Cortex-A510 speculative unprivileged load workaround
arm64: Rename ARM64_WORKAROUND_2966298
arm64: fpsimd: Bring cond_yield asm macro in line with new rules
arm64: scs: Work around full LTO issue with dynamic SCS
arm64: irq: include <linux/cpumask.h>
1, Raise minimum clang version to 18.0.0;
2, Enable initial Rust support for LoongArch;
3, Add built-in dtb support for LoongArch;
4, Use generic interface to support crashkernel=X,[high,low];
5, Some bug fixes and other small changes;
6, Update the default config file.
-----BEGIN PGP SIGNATURE-----
iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmWnW9cWHGNoZW5odWFj
YWlAa2VybmVsLm9yZwAKCRAChivD8uImel3CD/0Wnd2VOhoPubJkCXd+v7SdPDFB
+BlkevAdmKQXkxNVXHRwfirsEBnUdQTfSN/5hMd69ZWUTayYq3WFxOcaPs27AAyn
cXmGAzxfCjanSj+zxK8Gcmef5kppx3PRSbFdnWgc42Povu0xTOH3M31HXx5WXGtv
hZK439DspNGHlF1Bsbs3J8xbS76jc/HDZAqnIjLuefQUaWM8nhsYxJIwVeGKUX1T
IyEgBwhHhsY9ho/86yk8VXgordAN4dnMVmAHbR63HqjLo/8sck4IiPNxWKFCHex8
vgxp0zGxfBBts284EfSofDQHrSrrWl4+e2fW2QJ81BBDSS0wPCs4TAnzH+x9X7Wb
MJuh8WIJqhfXdPFxs5fdnUeykEm1V/oWFfkWORk4jbQkpY9aZbk/iv6uxsmRhmhv
2WPWvjF+7B2zSXtMcjgm71ymb/nU95W2FZO02GlwTnbGJRKA2xLkjn9rCXoHWjd3
IlxgIgZJ1vkPvFPS/sbekaTUEG+6/qTPGGa2Ol3Q5ZTTLk9serfDa8ay1xCZeOny
+fRBgLsuQAOGO2pvxfXjs+uvboZNUHeKrAi7XeR61GcbNpQDkjuwNJXQMiMQ+f66
jWM6H+hV+6sQ/W43KVrGCyBqTX4J9PSN/gX/Cq0PL74Yheop6neYXZTl5uDNYDe9
WYxiS9j/FoYgj8lxYQ==
=GzFR
-----END PGP SIGNATURE-----
Merge tag 'loongarch-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Raise minimum clang version to 18.0.0
- Enable initial Rust support for LoongArch
- Add built-in dtb support for LoongArch
- Use generic interface to support crashkernel=X,[high,low]
- Some bug fixes and other small changes
- Update the default config file.
* tag 'loongarch-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (22 commits)
MAINTAINERS: Add BPF JIT for LOONGARCH entry
LoongArch: Update Loongson-3 default config file
LoongArch: BPF: Prevent out-of-bounds memory access
LoongArch: BPF: Support 64-bit pointers to kfuncs
LoongArch: Fix definition of ftrace_regs_set_instruction_pointer()
LoongArch: Use generic interface to support crashkernel=X,[high,low]
LoongArch: Fix and simplify fcsr initialization on execve()
LoongArch: Let cores_io_master cover the largest NR_CPUS
LoongArch: Change SHMLBA from SZ_64K to PAGE_SIZE
LoongArch: Add a missing call to efi_esrt_init()
LoongArch: Parsing CPU-related information from DTS
LoongArch: dts: DeviceTree for Loongson-2K2000
LoongArch: dts: DeviceTree for Loongson-2K1000
LoongArch: dts: DeviceTree for Loongson-2K0500
LoongArch: Allow device trees be built into the kernel
dt-bindings: interrupt-controller: loongson,liointc: Fix dtbs_check warning for interrupt-names
dt-bindings: interrupt-controller: loongson,liointc: Fix dtbs_check warning for reg-names
dt-bindings: loongarch: Add Loongson SoC boards compatibles
dt-bindings: loongarch: Add CPU bindings for LoongArch
LoongArch: Enable initial Rust support
...
A collection of small fixes:
- Lots of ASoC SOF fixes and related reworks
- ASoC TAS codec fixes including DT updates
- A few HD-audio quirks and regression fixes
- Minor fixes for aloop, oxygen and scarlett2 mixer
-----BEGIN PGP SIGNATURE-----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=h9S1
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes:
- Lots of ASoC SOF fixes and related reworks
- ASoC TAS codec fixes including DT updates
- A few HD-audio quirks and regression fixes
- Minor fixes for aloop, oxygen and scarlett2 mixer"
* tag 'sound-fix-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
ALSA: hda/realtek: Enable headset mic on Lenovo M70 Gen5
ALSA: hda/realtek: Enable mute/micmute LEDs and limit mic boost on HP ZBook
ALSA: hda/relatek: Enable Mute LED on HP Laptop 15s-fq2xxx
ASoC: SOF: ipc4-loader: remove the CPC check warnings
ASoC: SOF: ipc4-pcm: remove log message for LLP
ALSA: hda: generic: Remove obsolete call to ledtrig_audio_get
ALSA: scarlett2: Fix yet more -Wformat-truncation warnings
ALSA: hda: Properly setup HDMI stream
ASoC: audio-graph-card2: fix index check on graph_parse_node_multi_nm()
ASoC: SOF: icp3-dtrace: Revert "Fix wrong kfree() usage"
ALSA: oxygen: Fix right channel of capture volume mixer
ALSA: aloop: Introduce a function to get if access is interleaved mode
ASoC: mediatek: sof-common: Add NULL check for normal_link string
ASoC: mediatek: mt8195: Remove afe-dai component and rework codec link
ASoC: mediatek: mt8192: Check existence of dai_name before dereferencing
ASoC: Intel: bxt_rt298: Fix kernel ops due to COMP_DUMMY change
ASoC: Intel: bxt_da7219_max98357a: Fix kernel ops due to COMP_DUMMY change
ASoC: codecs: rtq9128: Fix TDM enable and DAI format control flow
ASoC: codecs: rtq9128: Fix PM_RUNTIME usage
ASoC: tas2781: Add tas2563 into driver
...
new features:
- bq24190: Add support for BQ24296 charger
cleanups:
- all reset drivers: Stop using module_platform_driver_probe()
- gpio-restart: use devm_register_sys_off_handler
- pwr-mlxbf: support graceful reboot
- cw2015: correct time_to_empty units
- qcom-battmgr: Fix driver initialization sequence
- bq27xxx: Start/Stop delayed work in suspend/resume
- minor cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=tjkr
-----END PGP SIGNATURE-----
Merge tag 'for-v6.8-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"New features:
- bq24190: Add support for BQ24296 charger
Cleanups:
- all reset drivers: Stop using module_platform_driver_probe()
- gpio-restart: use devm_register_sys_off_handler
- pwr-mlxbf: support graceful reboot
- cw2015: correct time_to_empty units
- qcom-battmgr: Fix driver initialization sequence
- bq27xxx: Start/Stop delayed work in suspend/resume
- minor cleanups and fixes"
* tag 'for-v6.8-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (33 commits)
power: supply: bq24190_charger: Fix "initializer element is not constant" error
power: supply: bq24190_charger: Add support for BQ24296
dt-bindings: power: supply: bq24190: Add BQ24296 compatible
dt-bindings: power: reset: xilinx: Rename node names in examples
power: supply: qcom_battmgr: Register the power supplies after PDR is up
dt-bindings: power: reset: qcom-pon: fix inconsistent example
power: supply: Fix null pointer dereference in smb2_probe
power: reset: at91: Drop '__init' from at91_wakeup_status()
power: supply: Use multiple MODULE_AUTHOR statements
power: supply: Fix indentation and some other warnings
power: reset: gpio-restart: Use devm_register_sys_off_handler()
power: supply: bq256xx: fix some problem in bq256xx_hw_init
power: supply: cw2015: correct time_to_empty units in sysfs
power: reset: at91-sama5d2_shdwc: Convert to platform remove callback returning void
power: reset: at91-reset: Convert to platform remove callback returning void
power: reset: tps65086-restart: Convert to platform remove callback returning void
power: reset: syscon-poweroff: Convert to platform remove callback returning void
power: reset: rmobile-reset: Convert to platform remove callback returning void
power: reset: restart-poweroff: Convert to platform remove callback returning void
power: reset: regulator-poweroff: Convert to platform remove callback returning void
...
-----BEGIN PGP SIGNATURE-----
iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmWobwQACgkQiiy9cAdy
T1GTXgv/amjpAd1kEVwgfyUGvM9rsN+DtojoXt1z5xDkzJrnszI0s/WARz7o2gc/
6nIOxKWfpxb0QHRcLebZHbN7mrZeelHLyMqbx0Wphy5Y0cUQlq1C50l6xAkua1dd
/uPklGZVW9LDRvZYzdwa4Spi0tVwDgsnmK2UiWckCfc1yu9BVz3mg1gtaeg0Z/Z4
caojvSTXdJ/35xKV4udE4lo0PpbCC2h990c5iR8iOXgMuBlgIv3JQYC+3avuXXdS
Erneof5Vx9sUV7p7SWCR71VFaWnMsF1/DtXMKTxAJKjYGZPckQGQjxOJeonaRltg
0YjzeMT5/d5Fv3w0L1Mtn9pxyXTQ4ywKJ3Vpm21geuw7pl/70sqdQtg+ujljfN6j
uzb6mzwFezp3LGK8RI6h//JKUrnurIM/dc9FuRCoU2N91rfhGuiAvTwzrjh67WW8
HTmsnhNWnWuhH7OQJrOPQVEEs6DSUgA6MvHjslXoj7V+ksoKMe57JyZIr6Hx0CX9
W4Q0j6Hk
=gj+T
-----END PGP SIGNATURE-----
Merge tag '6.8-rc-smb-server-fixes-part2' of git://git.samba.org/ksmbd
Pull more smb server updates from Steve French:
- Fix for incorrect oplock break on directories when leases disabled
- UAF fix for race between create and destroy of tcp connection
- Important session setup SPNEGO fix
- Update ksmbd feature status summary
* tag '6.8-rc-smb-server-fixes-part2' of git://git.samba.org/ksmbd:
ksmbd: only v2 leases handle the directory
ksmbd: fix UAF issue in ksmbd_tcp_new_connection()
ksmbd: validate mech token in session setup
ksmbd: update feature status in documentation
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZabMrQAKCRCRxhvAZXjc
ovnUAQDgCOonb1tjtTvC8s8IMDUEoaVYZI91KVfsZQSJYN1sdQD+KfJmX1BhJnWG
l0cEffGfnWGXMZkZqDgLPHUIPzFrmws=
=1b3j
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.8.netfs' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull netfs updates from Christian Brauner:
"This extends the netfs helper library that network filesystems can use
to replace their own implementations. Both afs and 9p are ported. cifs
is ready as well but the patches are way bigger and will be routed
separately once this is merged. That will remove lots of code as well.
The overal goal is to get high-level I/O and knowledge of the page
cache and ouf of the filesystem drivers. This includes knowledge about
the existence of pages and folios
The pull request converts afs and 9p. This removes about 800 lines of
code from afs and 300 from 9p. For 9p it is now possible to do writes
in larger than a page chunks. Additionally, multipage folio support
can be turned on for 9p. Separate patches exist for cifs removing
another 2000+ lines. I've included detailed information in the
individual pulls I took.
Summary:
- Add NFS-style (and Ceph-style) locking around DIO vs buffered I/O
calls to prevent these from happening at the same time.
- Support for direct and unbuffered I/O.
- Support for write-through caching in the page cache.
- O_*SYNC and RWF_*SYNC writes use write-through rather than writing
to the page cache and then flushing afterwards.
- Support for write-streaming.
- Support for write grouping.
- Skip reads for which the server could only return zeros or EOF.
- The fscache module is now part of the netfs library and the
corresponding maintainer entry is updated.
- Some helpers from the fscache subsystem are renamed to mark them as
belonging to the netfs library.
- Follow-up fixes for the netfs library.
- Follow-up fixes for the 9p conversion"
* tag 'vfs-6.8.netfs' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (50 commits)
netfs: Fix wrong #ifdef hiding wait
cachefiles: Fix signed/unsigned mixup
netfs: Fix the loop that unmarks folios after writing to the cache
netfs: Fix interaction between write-streaming and cachefiles culling
netfs: Count DIO writes
netfs: Mark netfs_unbuffered_write_iter_locked() static
netfs: Fix proc/fs/fscache symlink to point to "netfs" not "../netfs"
netfs: Rearrange netfs_io_subrequest to put request pointer first
9p: Use length of data written to the server in preference to error
9p: Do a couple of cleanups
9p: Fix initialisation of netfs_inode for 9p
cachefiles: Fix __cachefiles_prepare_write()
9p: Use netfslib read/write_iter
afs: Use the netfs write helpers
netfs: Export the netfs_sreq tracepoint
netfs: Optimise away reads above the point at which there can be no data
netfs: Implement a write-through caching option
netfs: Provide a launder_folio implementation
netfs: Provide a writepages implementation
netfs, cachefiles: Pass upper bound length to allow expansion
...
Update the usage documentation to include some missing
configuration options. Update the todo list documentation
for cifs.ko
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----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=DLW9
-----END PGP SIGNATURE-----
Merge tag 'for-6.8/block-2024-01-18' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- tcp, fc, and rdma target fixes (Maurizio, Daniel, Hannes,
Christoph)
- discard fixes and improvements (Christoph)
- timeout debug improvements (Keith, Max)
- various cleanups (Daniel, Max, Giuxen)
- trace event string fixes (Arnd)
- shadow doorbell setup on reset fix (William)
- a write zeroes quirk for SK Hynix (Jim)
- MD pull request via Song:
- Sparse warning since v6.0 (Bart)
- /proc/mdstat regression since v6.7 (Yu Kuai)
- Use symbolic error value (Christian)
- IO Priority documentation update (Christian)
- Fix for accessing queue limits without having entered the queue
(Christoph, me)
- Fix for loop dio support (Christoph)
- Move null_blk off deprecated ida interface (Christophe)
- Ensure nbd initializes full msghdr (Eric)
- Fix for a regression with the folio conversion, which is now easier
to hit because of an unrelated change (Matthew)
- Remove redundant check in virtio-blk (Li)
- Fix for a potential hang in sbitmap (Ming)
- Fix for partial zone appending (Damien)
- Misc changes and fixes (Bart, me, Kemeng, Dmitry)
* tag 'for-6.8/block-2024-01-18' of git://git.kernel.dk/linux: (45 commits)
Documentation: block: ioprio: Update schedulers
loop: fix the the direct I/O support check when used on top of block devices
blk-mq: Remove the hctx 'run' debugfs attribute
nbd: always initialize struct msghdr completely
block: Fix iterating over an empty bio with bio_for_each_folio_all
block: bio-integrity: fix kcalloc() arguments order
virtio_blk: remove duplicate check if queue is broken in virtblk_done
sbitmap: remove stale comment in sbq_calc_wake_batch
block: Correct a documentation comment in blk-cgroup.c
null_blk: Remove usage of the deprecated ida_simple_xx() API
block: ensure we hold a queue reference when using queue limits
blk-mq: rename blk_mq_can_use_cached_rq
block: print symbolic error name instead of error code
blk-mq: fix IO hang from sbitmap wakeup race
nvmet-rdma: avoid circular locking dependency on install_queue()
nvmet-tcp: avoid circular locking dependency on install_queue()
nvme-pci: set doorbell config before unquiescing
block: fix partial zone append completion handling in req_bio_endio()
block/iocost: silence warning on 'last_period' potentially being unused
md/raid1: Use blk_opf_t for read and write operations
...
- Make Kconfig parse the input .config more precisely
- Support W=c and W=e options for Kconfig
- Set Kconfig int/hex symbols to zero if the 'default' property is
missing
- Add .editorconfig
- Add scripts/git.orderFile
- Add a script to detect backward-incompatible changes in UAPI headers
- Resolve the symlink passed to O= option properly
- Use the user-supplied mtime for all files in the builtin initramfs,
which provides better reproducible builds
- Fix the direct execution of debian/rules for Debian package builds
- Use build ID instead of the .gnu_debuglink section for the Debian dbg
package
-----BEGIN PGP SIGNATURE-----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=HXZB
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Make Kconfig parse the input .config more precisely
- Support W=c and W=e options for Kconfig
- Set Kconfig int/hex symbols to zero if the 'default' property is
missing
- Add .editorconfig
- Add scripts/git.orderFile
- Add a script to detect backward-incompatible changes in UAPI headers
- Resolve the symlink passed to O= option properly
- Use the user-supplied mtime for all files in the builtin initramfs,
which provides better reproducible builds
- Fix the direct execution of debian/rules for Debian package builds
- Use build ID instead of the .gnu_debuglink section for the Debian dbg
package
* tag 'kbuild-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (53 commits)
kbuild: deb-pkg: use debian/<package> for tmpdir
kbuild: deb-pkg: move 'make headers' to build-arch
kbuild: deb-pkg: do not search for 'scripts' directory under arch/
kbuild: deb-pkg: use build ID instead of debug link for dbg package
kbuild: deb-pkg: use more debhelper commands in builddeb
kbuild: deb-pkg: remove unneeded '-f $srctree/Makefile' in debian/rules
kbuild: deb-pkg: allow to run debian/rules from output directory
kbuild: deb-pkg: set DEB_* variables if debian/rules is directly executed
kbuild: deb-pkg: squash scripts/package/deb-build-option to debian/rules
kbuild: deb-pkg: factor out common Make options in debian/rules
kbuild: deb-pkg: hard-code Build-Depends
kbuild: deb-pkg: split debian/copyright from the mkdebian script
gen_init_cpio: Apply mtime supplied by user to all file types
kbuild: resolve symlinks for O= properly
docs: dev-tools: Add UAPI checker documentation
check-uapi: Introduce check-uapi.sh
scripts: Introduce a default git.orderFile
kconfig: WERROR unmet symbol dependency
Add .editorconfig file for basic formatting
kconfig: Use KCONFIG_CONFIG instead of .config
...
(controllers set the flag, but there is no client to use it). Also,
CLASS_SPD support gets simplified to prepare removal in the future.
Class based instantiation is not recommended these days anyhow.
Furthermore, I2C core now creates a debugfs directory per I2C adapter.
Current bus driver users were converted to use it. Then, there are also
quite some driver updates. Standing out are patches for the wmt-driver
which is refactored to support more variants. This is the rebased pull
request where a large series for the designware driver was dropped.
-----BEGIN PGP SIGNATURE-----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=8D3Q
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.8-rc1-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"This removes the currently unused CLASS_DDC support (controllers set
the flag, but there is no client to use it).
Also, CLASS_SPD support gets simplified to prepare removal in the
future. Class based instantiation is not recommended these days
anyhow.
Furthermore, I2C core now creates a debugfs directory per I2C adapter.
Current bus driver users were converted to use it.
Finally, quite some driver updates. Standing out are patches for the
wmt-driver which is refactored to support more variants.
This is the rebased pull request where a large series for the
designware driver was dropped"
* tag 'i2c-for-6.8-rc1-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits)
MAINTAINERS: use proper email for my I2C work
i2c: stm32f7: add support for stm32mp25 soc
i2c: stm32f7: perform I2C_ISR read once at beginning of event isr
dt-bindings: i2c: document st,stm32mp25-i2c compatible
i2c: stm32f7: simplify status messages in case of errors
i2c: stm32f7: perform most of irq job in threaded handler
i2c: stm32f7: use dev_err_probe upon calls of devm_request_irq
i2c: i801: Add lis3lv02d for Dell XPS 15 7590
i2c: i801: Add lis3lv02d for Dell Precision 3540
i2c: wmt: Reduce redundant: REG_CR setting
i2c: wmt: Reduce redundant: function parameter
i2c: wmt: Reduce redundant: clock mode setting
i2c: wmt: Reduce redundant: wait event complete
i2c: wmt: Reduce redundant: bus busy check
i2c: mux: reg: Remove class-based device auto-detection support
i2c: make i2c_bus_type const
dt-bindings: at24: add ROHM BR24G04
eeprom: at24: use of_match_ptr()
i2c: cpm: Remove linux,i2c-index conversion from be32
i2c: imx: Make SDA actually optional for bus recovering
...
Subsytem:
New driver:
- Analog Devices MAX31335
- Nuvoton ma35d1
- Texas Instrument TPS6594 PMIC RTC
Drivers:
- cmos: use ACPI alarm instead of HPET on recent AMD platforms
- nuvoton: add NCT3015Y-R and NCT3018Y-R support
- rv8803: proper suspend/resume and wakeup-source support
-----BEGIN PGP SIGNATURE-----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=7u4i
-----END PGP SIGNATURE-----
Merge tag 'rtc-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"There are three new drivers this cycle. Also the cmos driver is
getting fixes for longstanding wakeup issues on AMD.
New drivers:
- Analog Devices MAX31335
- Nuvoton ma35d1
- Texas Instrument TPS6594 PMIC RTC
Drivers:
- cmos: use ACPI alarm instead of HPET on recent AMD platforms
- nuvoton: add NCT3015Y-R and NCT3018Y-R support
- rv8803: proper suspend/resume and wakeup-source support"
* tag 'rtc-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (26 commits)
rtc: nuvoton: Compatible with NCT3015Y-R and NCT3018Y-R
rtc: da9063: Use dev_err_probe()
rtc: da9063: Use device_get_match_data()
rtc: da9063: Make IRQ as optional
rtc: max31335: Fix comparison in max31335_volatile_reg()
rtc: max31335: use regmap_update_bits_check
rtc: max31335: remove unecessary locking
rtc: max31335: add driver support
dt-bindings: rtc: max31335: add max31335 bindings
rtc: rv8803: add wakeup-source support
rtc: ac100: remove misuses of kernel-doc
rtc: class: Remove usage of the deprecated ida_simple_xx() API
rtc: MAINTAINERS: drop Alessandro Zummo
rtc: ma35d1: remove hardcoded UIE support
dt-bindings: rtc: qcom-pm8xxx: fix inconsistent example
rtc: rv8803: Add power management support
rtc: ds3232: avoid unused-const-variable warning
rtc: lpc24xx: add missing dependency
rtc: tps6594: Add driver for TPS6594 RTC
rtc: Add driver for Nuvoton ma35d1 rtc controller
...
- a new driver for Adafruit Seesaw gamepad device
- Zforce touchscreen will handle standard device properties for axis
swap/inversion
- handling of advanced sensitivity settings in Microchip CAP11xx
capacitive sensor driver
- more drivers have been converted to use newer gpiod API
- support for dedicated wakeup IRQs in gpio-keys dirver
- support for slider gestures and OTP variants in iqs269a driver
- atkbd will report keyboard version as 0xab83 in cases when GET ID
command was skipped (to deal with problematic firmware on newer
laptops), restoring the previous behavior
- other assorted cleanups and changes
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZalqoQAKCRBAj56VGEWX
nOqHAP4u4b/r4w2aeULy3kpESgbUQ1vXpFUus/6AHTw1FAtbsgD/XxV3ZWKZ0H8J
VfZ81yXvT3WstJM7p7YNP0GGXJ/HRQg=
=l0Z8
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.8-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a new driver for Adafruit Seesaw gamepad device
- Zforce touchscreen will handle standard device properties for axis
swap/inversion
- handling of advanced sensitivity settings in Microchip CAP11xx
capacitive sensor driver
- more drivers have been converted to use newer gpiod API
- support for dedicated wakeup IRQs in gpio-keys dirver
- support for slider gestures and OTP variants in iqs269a driver
- atkbd will report keyboard version as 0xab83 in cases when GET ID
command was skipped (to deal with problematic firmware on newer
laptops), restoring the previous behavior
- other assorted cleanups and changes
* tag 'input-for-v6.8-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (44 commits)
Input: atkbd - use ab83 as id when skipping the getid command
Input: driver for Adafruit Seesaw Gamepad
dt-bindings: input: bindings for Adafruit Seesaw Gamepad
Input: da9063_onkey - avoid explicitly setting input's parent
Input: da9063_onkey - avoid using OF-specific APIs
Input: iqs269a - add support for OTP variants
dt-bindings: input: iqs269a: Add bindings for OTP variants
Input: iqs269a - add support for slider gestures
dt-bindings: input: iqs269a: Add bindings for slider gestures
Input: gpio-keys - filter gpio_keys -EPROBE_DEFER error messages
Input: zforce_ts - accept standard touchscreen properties
dt-bindings: touchscreen: neonode,zforce: Use standard properties
dt-bindings: touchscreen: convert neonode,zforce to json-schema
dt-bindings: input: convert drv266x to json-schema
Input: da9063 - use dev_err_probe()
Input: da9063 - drop redundant prints in probe()
Input: da9063 - simplify obtaining OF match data
Input: as5011 - convert to GPIO descriptor
Input: omap-keypad - drop optional GPIO support
Input: tca6416-keypad - drop unused include
...
- revert the changes aiming to use a read-write semaphore to protect the
list of GPIO devices due to calls to legacy API taking that lock from
atomic context in old code
- fix inverted logic in DEFINE_FREE() for GPIO device references
- check the return value of bgpio_init() in gpio-mlxbf3
- fix node address in the DT bindings example for gpio-xilinx
- fix signedness bug in gpio-rtd
- fix kernel-doc warnings in gpio-en7523
-----BEGIN PGP SIGNATURE-----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=g2QY
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"Apart from some regular driver fixes there's a relatively big revert
of the locking changes that were introduced to GPIOLIB in this merge
window.
This is because it turned out that some legacy GPIO interfaces - that
need to translate a number from the global GPIO numberspace to the
address of the relevant descriptor, thus running a GPIO device lookup
and taking the GPIO device list lock - are still used in old code from
atomic context resulting in "scheduling while atomic" errors.
I'll try to make the read-only part of the list access entirely
lockless using SRCU but this will take some time so let's go back to
the old global spinlock for now.
Summary:
- revert the changes aiming to use a read-write semaphore to protect
the list of GPIO devices due to calls to legacy API taking that
lock from atomic context in old code
- fix inverted logic in DEFINE_FREE() for GPIO device references
- check the return value of bgpio_init() in gpio-mlxbf3
- fix node address in the DT bindings example for gpio-xilinx
- fix signedness bug in gpio-rtd
- fix kernel-doc warnings in gpio-en7523"
* tag 'gpio-fixes-for-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: revert the attempt to protect the GPIO device list with an rwsem
gpio: EN7523: fix kernel-doc warnings
gpiolib: Fix scope-based gpio_device refcounting
gpio: mlxbf3: add an error code check in mlxbf3_gpio_probe
dt-bindings: gpio: xilinx: Fix node address in gpio
gpio: rtd: Fix signedness bug in probe
- Add support for Monolithic Power Systems MP3309C WLED Step-up Converter
- Fix-ups
- Use/convert to new/better APIs/helpers/MACROs instead of hand-rolling implementations
- Device Tree Binding updates
- Demote non-kerneldoc header comments
- Improve error handling; return proper error values, simplify, avoid duplicates, etc
- Convert over to the new (kinda) GPIOD API
- Bug Fixes
- Fix uninitialised local variable
-----BEGIN PGP SIGNATURE-----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=SXS0
-----END PGP SIGNATURE-----
Merge tag 'backlight-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"New Drivers:
- Add support for Monolithic Power Systems MP3309C WLED Step-up Converter
Fix-ups:
- Use/convert to new/better APIs/helpers/MACROs instead of
hand-rolling implementations
- Device Tree Binding updates
- Demote non-kerneldoc header comments
- Improve error handling; return proper error values, simplify, avoid
duplicates, etc
- Convert over to the new (kinda) GPIOD API
Bug Fixes:
- Fix uninitialised local variable"
* tag 'backlight-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: hx8357: Convert to agnostic GPIO API
backlight: ili922x: Add an error code check in ili922x_write()
backlight: ili922x: Drop kernel-doc for local macros
backlight: mp3309c: Fix uninitialized local variable
backlight: pwm_bl: Use dev_err_probe
backlight: mp3309c: Add support for MPS MP3309C
dt-bindings: backlight: mp3309c: Remove two required properties
- Add support for parsing the Coherent Device Attribute Table (CDAT)
- Add support for calculating a platform CXL QoS class from CDAT data
- Unify the tracing of EFI CXL Events with native CXL Events.
- Add Get Timestamp support
- Miscellaneous cleanups and fixups
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCZaHVvAAKCRDfioYZHlFs
Z3sCAQDPHSsHmj845k4lvKbWjys3eh78MKKEFyTXLQgYhOlsGAEAigQY2ZiSum52
nwdIgpOOADNt0Iq6yXuLsmn9xvY9bAU=
=HjCl
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL (Compute Express Link) updates from Dan Williams:
"The bulk of this update is support for enumerating the performance
capabilities of CXL memory targets and connecting that to a platform
CXL memory QoS class. Some follow-on work remains to hook up this data
into core-mm policy, but that is saved for v6.9.
The next significant update is unifying how CXL event records (things
like background scrub errors) are processed between so called
"firmware first" and native error record retrieval. The CXL driver
handler that processes the record retrieved from the device mailbox is
now the handler for that same record format coming from an EFI/ACPI
notification source.
This also contains miscellaneous feature updates, like Get Timestamp,
and other fixups.
Summary:
- Add support for parsing the Coherent Device Attribute Table (CDAT)
- Add support for calculating a platform CXL QoS class from CDAT data
- Unify the tracing of EFI CXL Events with native CXL Events.
- Add Get Timestamp support
- Miscellaneous cleanups and fixups"
* tag 'cxl-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (41 commits)
cxl/core: use sysfs_emit() for attr's _show()
cxl/pci: Register for and process CPER events
PCI: Introduce cleanup helpers for device reference counts and locks
acpi/ghes: Process CXL Component Events
cxl/events: Create a CXL event union
cxl/events: Separate UUID from event structures
cxl/events: Remove passing a UUID to known event traces
cxl/events: Create common event UUID defines
cxl/events: Promote CXL event structures to a core header
cxl: Refactor to use __free() for cxl_root allocation in cxl_endpoint_port_probe()
cxl: Refactor to use __free() for cxl_root allocation in cxl_find_nvdimm_bridge()
cxl: Fix device reference leak in cxl_port_perf_data_calculate()
cxl: Convert find_cxl_root() to return a 'struct cxl_root *'
cxl: Introduce put_cxl_root() helper
cxl/port: Fix missing target list lock
cxl/port: Fix decoder initialization when nr_targets > interleave_ways
cxl/region: fix x9 interleave typo
cxl/trace: Pass UUID explicitly to event traces
cxl/region: use %pap format to print resource_size_t
cxl/region: Add dev_dbg() detail on failure to allocate HPA space
...
- Add debugfs support, initially used for reporting device migration
state. (Longfang Liu)
- Fixes and support for migration dirty tracking across multiple IOVA
regions in the pds-vfio-pci driver. (Brett Creeley)
- Improved IOMMU allocation accounting visibility. (Pasha Tatashin)
- Virtio infrastructure and a new virtio-vfio-pci variant driver, which
provides emulation of a legacy virtio interfaces on modern virtio
hardware for virtio-net VF devices where the PF driver exposes
support for legacy admin queues, ie. an emulated IO BAR on an SR-IOV
VF to provide driver ABI compatibility to legacy devices.
(Yishai Hadas & Feng Liu)
- Migration fixes for the hisi-acc-vfio-pci variant driver.
(Shameer Kolothum)
- Kconfig dependency fix for new virtio-vfio-pci variant driver.
(Arnd Bergmann)
-----BEGIN PGP SIGNATURE-----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=IuK2
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.8-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Add debugfs support, initially used for reporting device migration
state (Longfang Liu)
- Fixes and support for migration dirty tracking across multiple IOVA
regions in the pds-vfio-pci driver (Brett Creeley)
- Improved IOMMU allocation accounting visibility (Pasha Tatashin)
- Virtio infrastructure and a new virtio-vfio-pci variant driver, which
provides emulation of a legacy virtio interfaces on modern virtio
hardware for virtio-net VF devices where the PF driver exposes
support for legacy admin queues, ie. an emulated IO BAR on an SR-IOV
VF to provide driver ABI compatibility to legacy devices (Yishai
Hadas & Feng Liu)
- Migration fixes for the hisi-acc-vfio-pci variant driver (Shameer
Kolothum)
- Kconfig dependency fix for new virtio-vfio-pci variant driver (Arnd
Bergmann)
* tag 'vfio-v6.8-rc1' of https://github.com/awilliam/linux-vfio: (22 commits)
vfio/virtio: fix virtio-pci dependency
hisi_acc_vfio_pci: Update migration data pointer correctly on saving/resume
vfio/virtio: Declare virtiovf_pci_aer_reset_done() static
vfio/virtio: Introduce a vfio driver over virtio devices
vfio/pci: Expose vfio_pci_core_iowrite/read##size()
vfio/pci: Expose vfio_pci_core_setup_barmap()
virtio-pci: Introduce APIs to execute legacy IO admin commands
virtio-pci: Initialize the supported admin commands
virtio-pci: Introduce admin commands
virtio-pci: Introduce admin command sending function
virtio-pci: Introduce admin virtqueue
virtio: Define feature bit for administration virtqueue
vfio/type1: account iommu allocations
vfio/pds: Add multi-region support
vfio/pds: Move seq/ack bitmaps into region struct
vfio/pds: Pass region info to relevant functions
vfio/pds: Move and rename region specific info
vfio/pds: Only use a single SGL for both seq and ack
vfio/pds: Fix calculations in pds_vfio_dirty_sync
MAINTAINERS: Add vfio debugfs interface doc link
...
Including:
- Core changes:
- Fix race conditions in device probe path
- Retire IOMMU bus_ops
- Support for passing custom allocators to page table drivers
- Clean up Kconfig around IOMMU_SVA
- Support for sharing SVA domains with all devices bound to
a mm
- Firmware data parsing cleanup
- Tracing improvements for iommu-dma code
- Some smaller fixes and cleanups
- ARM-SMMU drivers:
- Device-tree binding updates:
- Add additional compatible strings for Qualcomm SoCs
- Document Adreno clocks for Qualcomm's SM8350 SoC
- SMMUv2:
- Implement support for the ->domain_alloc_paging() callback
- Ensure Secure context is restored following suspend of Qualcomm SMMU
implementation
- SMMUv3:
- Disable stalling mode for the "quiet" context descriptor
- Minor refactoring and driver cleanups
- Intel VT-d driver:
- Cleanup and refactoring
- AMD IOMMU driver:
- Improve IO TLB invalidation logic
- Small cleanups and improvements
- Rockchip IOMMU driver:
- DT binding update to add Rockchip RK3588
- Apple DART driver:
- Apple M1 USB4/Thunderbolt DART support
- Cleanups
- Virtio IOMMU driver:
- Add support for iotlb_sync_map
- Enable deferred IO TLB flushes
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAmWecQoACgkQK/BELZcB
GuN5ZxAAzC5QUKAzANx0puk7QhPpKKlbSvj6Q7iRgCLk00KJO1+VQh9v4ouCmXqF
kn3Ko8gddjhtrgwN0OQ54F39cLUrp1SBemy71K5YOR+vu8VKtwtmawZGeeRZ+k+B
Eohw58oaXTiR1maYvoLixLYczLrjklqyJOQ1vZ0GxFGxDqrFByAryHDgG/3OCpJx
C9e6PsLbbfhfqA8Kv97iKcBqniGbXxAMuodqSUG0buQ3oZgfpIP6Bt3EgUzFGPGk
3BTlYxowS/gkjUWd3fgjQFIFLTA01u9FhpA2Jb0a4v67pUCR64YxHN7rBQ6ZChtG
kB9laQfU9re79RsHhqQzr0JT9x/eyq7pzGzjp5TV5TPW6IW+sqjMIPhzd9P08Ef7
BclkCVobx0jSAHOhnnG4QJiKANr2Y2oM3HfsAJccMMY45RRhUKmVqM7jxMPfGn3A
i+inlee73xTjZXJse1EWG1fmKKMLvX9LDEp4DyOfn9CqVT+7hpZvzPjfbGr937Rm
JlwXhF3rQXEpOCagEsbt1vOf+V0e9QiCLf1Y2KpkIkDbE5wwSD/2qLm3tFhJG3oF
fkW+J14Cid0pj+hY0afGe0kOUOIYlimu0nFmSf0pzMH+UktZdKogSfyb1gSDsy+S
rsZRGPFhMJ832ExqhlDfxqBebqh+jsfKynlskui6Td5C9ZULaHA=
=q751
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- Fix race conditions in device probe path
- Retire IOMMU bus_ops
- Support for passing custom allocators to page table drivers
- Clean up Kconfig around IOMMU_SVA
- Support for sharing SVA domains with all devices bound to a mm
- Firmware data parsing cleanup
- Tracing improvements for iommu-dma code
- Some smaller fixes and cleanups
ARM-SMMU drivers:
- Device-tree binding updates:
- Add additional compatible strings for Qualcomm SoCs
- Document Adreno clocks for Qualcomm's SM8350 SoC
- SMMUv2:
- Implement support for the ->domain_alloc_paging() callback
- Ensure Secure context is restored following suspend of Qualcomm
SMMU implementation
- SMMUv3:
- Disable stalling mode for the "quiet" context descriptor
- Minor refactoring and driver cleanups
Intel VT-d driver:
- Cleanup and refactoring
AMD IOMMU driver:
- Improve IO TLB invalidation logic
- Small cleanups and improvements
Rockchip IOMMU driver:
- DT binding update to add Rockchip RK3588
Apple DART driver:
- Apple M1 USB4/Thunderbolt DART support
- Cleanups
Virtio IOMMU driver:
- Add support for iotlb_sync_map
- Enable deferred IO TLB flushes"
* tag 'iommu-updates-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (66 commits)
iommu: Don't reserve 0-length IOVA region
iommu/vt-d: Move inline helpers to header files
iommu/vt-d: Remove unused vcmd interfaces
iommu/vt-d: Remove unused parameter of intel_pasid_setup_pass_through()
iommu/vt-d: Refactor device_to_iommu() to retrieve iommu directly
iommu/sva: Fix memory leak in iommu_sva_bind_device()
dt-bindings: iommu: rockchip: Add Rockchip RK3588
iommu/dma: Trace bounce buffer usage when mapping buffers
iommu/arm-smmu: Convert to domain_alloc_paging()
iommu/arm-smmu: Pass arm_smmu_domain to internal functions
iommu/arm-smmu: Implement IOMMU_DOMAIN_BLOCKED
iommu/arm-smmu: Convert to a global static identity domain
iommu/arm-smmu: Reorganize arm_smmu_domain_add_master()
iommu/arm-smmu-v3: Remove ARM_SMMU_DOMAIN_NESTED
iommu/arm-smmu-v3: Master cannot be NULL in arm_smmu_write_strtab_ent()
iommu/arm-smmu-v3: Add a type for the STE
iommu/arm-smmu-v3: disable stall for quiet_cd
iommu/qcom: restore IOMMU state if needed
iommu/arm-smmu-qcom: Add QCM2290 MDSS compatible
iommu/arm-smmu-qcom: Add missing GMU entry to match table
...
- Allow kernel trace instance creation to specify what events are created
Inside the kernel, a subsystem may create a tracing instance that it can
use to send events to user space. This sub-system may not care about the
thousands of events that exist in eventfs. Allow the sub-system to specify
what sub-systems of events it cares about, and only those events are exposed
to this instance.
- Allow the ring buffer to be broken up into bigger sub-buffers than just the
architecture page size. A new tracefs file called "buffer_subbuf_size_kb"
is created. The user can now specify a minimum size the sub-buffer may be
in kilobytes. Note, that the implementation currently make the sub-buffer
size a power of 2 pages (1, 2, 4, 8, 16, ...) but the user only writes in
kilobyte size, and the sub-buffer will be updated to the next size that
it will can accommodate it. If the user writes in 10, it will change the
size to be 4 pages on x86 (16K), as that is the next available size that
can hold 10K pages.
- Update the debug output when a corrupt time is detected in the ring buffer.
If the ring buffer detects inconsistent timestamps, there's a debug config
options that will dump the contents of the meta data of the sub-buffer that
is used for debugging. Add some more information to this dump that helps
with debugging.
- Add more timestamp debugging checks (only triggers when the config is enabled)
- Increase the trace_seq iterator to 2 page sizes.
- Allow strings written into tracefs_marker to be larger. Up to just under
2 page sizes (based on what trace_seq can hold).
- Increase the trace_maker_raw write to be as big as a sub-buffer can hold.
- Remove 32 bit time stamp logic, now that the rb_time_cmpxchg() has been
removed.
- More selftests were added.
- Some code clean ups as well.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZZ8p3BQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6ql2GAQDZg/zlFEiJHyTfWbCIE8pA3T5xbzKo
26TNxIZAxJJZpQEAvGFU5Smy14pG6soEoVMp8B6ZOANbqU8VVamhOL+r+Qw=
=0OYG
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Allow kernel trace instance creation to specify what events are
created
Inside the kernel, a subsystem may create a tracing instance that it
can use to send events to user space. This sub-system may not care
about the thousands of events that exist in eventfs. Allow the
sub-system to specify what sub-systems of events it cares about, and
only those events are exposed to this instance.
- Allow the ring buffer to be broken up into bigger sub-buffers than
just the architecture page size.
A new tracefs file called "buffer_subbuf_size_kb" is created. The
user can now specify a minimum size the sub-buffer may be in
kilobytes. Note, that the implementation currently make the
sub-buffer size a power of 2 pages (1, 2, 4, 8, 16, ...) but the user
only writes in kilobyte size, and the sub-buffer will be updated to
the next size that it will can accommodate it. If the user writes in
10, it will change the size to be 4 pages on x86 (16K), as that is
the next available size that can hold 10K pages.
- Update the debug output when a corrupt time is detected in the ring
buffer. If the ring buffer detects inconsistent timestamps, there's a
debug config options that will dump the contents of the meta data of
the sub-buffer that is used for debugging. Add some more information
to this dump that helps with debugging.
- Add more timestamp debugging checks (only triggers when the config is
enabled)
- Increase the trace_seq iterator to 2 page sizes.
- Allow strings written into tracefs_marker to be larger. Up to just
under 2 page sizes (based on what trace_seq can hold).
- Increase the trace_maker_raw write to be as big as a sub-buffer can
hold.
- Remove 32 bit time stamp logic, now that the rb_time_cmpxchg() has
been removed.
- More selftests were added.
- Some code clean ups as well.
* tag 'trace-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (29 commits)
ring-buffer: Remove stale comment from ring_buffer_size()
tracing histograms: Simplify parse_actions() function
tracing/selftests: Remove exec permissions from trace_marker.tc test
ring-buffer: Use subbuf_order for buffer page masking
tracing: Update subbuffer with kilobytes not page order
ringbuffer/selftest: Add basic selftest to test changing subbuf order
ring-buffer: Add documentation on the buffer_subbuf_order file
ring-buffer: Just update the subbuffers when changing their allocation order
ring-buffer: Keep the same size when updating the order
tracing: Stop the tracing while changing the ring buffer subbuf size
tracing: Update snapshot order along with main buffer order
ring-buffer: Make sure the spare sub buffer used for reads has same size
ring-buffer: Do no swap cpu buffers if order is different
ring-buffer: Clear pages on error in ring_buffer_subbuf_order_set() failure
ring-buffer: Read and write to ring buffers with custom sub buffer size
ring-buffer: Set new size of the ring buffer sub page
ring-buffer: Add interface for configuring trace sub buffer size
ring-buffer: Page size per ring buffer
ring-buffer: Have ring_buffer_print_page_header() be able to access ring_buffer_iter
ring-buffer: Check if absolute timestamp goes backwards
...
-----BEGIN PGP SIGNATURE-----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=1EJI
-----END PGP SIGNATURE-----
Merge tag 'x86_tdx_for_6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 TDX updates from Dave Hansen:
"This contains the initial support for host-side TDX support so that
KVM can run TDX-protected guests. This does not include the actual
KVM-side support which will come from the KVM folks. The TDX host
interactions with kexec also needs to be ironed out before this is
ready for prime time, so this code is currently Kconfig'd off when
kexec is on.
The majority of the code here is the kernel telling the TDX module
which memory to protect and handing some additional memory over to it
to use to store TDX module metadata. That sounds pretty simple, but
the TDX architecture is rather flexible and it takes quite a bit of
back-and-forth to say, "just protect all memory, please."
There is also some code tacked on near the end of the series to handle
a hardware erratum. The erratum can make software bugs such as a
kernel write to TDX-protected memory cause a machine check and
masquerade as a real hardware failure. The erratum handling watches
out for these and tries to provide nicer user errors"
* tag 'x86_tdx_for_6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86/virt/tdx: Make TDX host depend on X86_MCE
x86/virt/tdx: Disable TDX host support when kexec is enabled
Documentation/x86: Add documentation for TDX host support
x86/mce: Differentiate real hardware #MCs from TDX erratum ones
x86/cpu: Detect TDX partial write machine check erratum
x86/virt/tdx: Handle TDX interaction with sleep and hibernation
x86/virt/tdx: Initialize all TDMRs
x86/virt/tdx: Configure global KeyID on all packages
x86/virt/tdx: Configure TDX module with the TDMRs and global KeyID
x86/virt/tdx: Designate reserved areas for all TDMRs
x86/virt/tdx: Allocate and set up PAMTs for TDMRs
x86/virt/tdx: Fill out TDMRs to cover all TDX memory regions
x86/virt/tdx: Add placeholder to construct TDMRs to cover all TDX memory regions
x86/virt/tdx: Get module global metadata for module initialization
x86/virt/tdx: Use all system memory when initializing TDX module as TDX memory
x86/virt/tdx: Add skeleton to enable TDX on demand
x86/virt/tdx: Add SEAMCALL error printing for module initialization
x86/virt/tdx: Handle SEAMCALL no entropy error in common code
x86/virt/tdx: Make INTEL_TDX_HOST depend on X86_X2APIC
x86/virt/tdx: Define TDX supported page sizes as macros
...
Add a new compatible st,stm32mp25-i2c for the STM32MP25 series which
has only one interrupt line for both events and errors and differs in
term of handling of FastModePlus.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Here is the big set of USB and Thunderbolt changes for 6.8-rc1.
Included in here are the following:
- Thunderbolt subsystem and driver updates for USB 4 hardware and
issues reported by real devices
- xhci driver updates
- dwc3 driver updates
- uvc_video gadget driver updates
- typec driver updates
- gadget string functions cleaned up
- other small changes
All of these have been in the linux-next tree for a while with no
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZaedng8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yndHACfX3SA2ipK5umpMsWOoLMCBV6VyrwAn3t+FPd/
z4mNiCuNUhbEnU7RinK0
=k/E9
-----END PGP SIGNATURE-----
Merge tag 'usb-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.8-rc1.
Included in here are the following:
- Thunderbolt subsystem and driver updates for USB 4 hardware and
issues reported by real devices
- xhci driver updates
- dwc3 driver updates
- uvc_video gadget driver updates
- typec driver updates
- gadget string functions cleaned up
- other small changes
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'usb-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits)
usb: typec: tipd: fix use of device-specific init function
usb: typec: tipd: Separate reset for TPS6598x
usb: mon: Fix atomicity violation in mon_bin_vma_fault
usb: gadget: uvc: Remove nested locking
usb: gadget: uvc: Fix use are free during STREAMOFF
usb: typec: class: fix typec_altmode_put_partner to put plugs
dt-bindings: usb: dwc3: Limit num-hc-interrupters definition
dt-bindings: usb: xhci: Add num-hc-interrupters definition
xhci: add support to allocate several interrupters
USB: core: Use device_driver directly in struct usb_driver and usb_device_driver
arm64: dts: mediatek: mt8195: Add 'rx-fifo-depth' for cherry
usb: xhci-mtk: fix a short packet issue of gen1 isoc-in transfer
dt-bindings: usb: mtk-xhci: add a property for Gen1 isoc-in transfer issue
arm64: dts: qcom: msm8996: Remove PNoC clock from MSS
arm64: dts: qcom: msm8996: Remove AGGRE2 clock from SLPI
arm64: dts: qcom: msm8998: Remove AGGRE2 clock from SLPI
arm64: dts: qcom: msm8939: Drop RPM bus clocks
arm64: dts: qcom: sdm630: Drop RPM bus clocks
arm64: dts: qcom: qcs404: Drop RPM bus clocks
arm64: dts: qcom: msm8996: Drop RPM bus clocks
...
Here is the big set of tty and serial driver changes for 6.8-rc1.
As usual, Jiri has a bunch of refactoring and cleanups for the tty core
and drivers in here, along with the usual set of rs485 updates (someday
this might work properly...) Along with those, in here are changes for:
- sc16is7xx serial driver updates
- platform driver removal api updates
- amba-pl011 driver updates
- tty driver binding updates
- other small tty/serial driver updates and changes
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZaeUaw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykyOgCgp1uhP/b9iW6qM7qL6OYEG6idI0kAnj0VASNm
vSI69HmdKKwo69YLOSBp
=14n1
-----END PGP SIGNATURE-----
Merge tag 'tty-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH:
"Here is the big set of tty and serial driver changes for 6.8-rc1.
As usual, Jiri has a bunch of refactoring and cleanups for the tty
core and drivers in here, along with the usual set of rs485 updates
(someday this might work properly...)
Along with those, in here are changes for:
- sc16is7xx serial driver updates
- platform driver removal api updates
- amba-pl011 driver updates
- tty driver binding updates
- other small tty/serial driver updates and changes
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (197 commits)
serial: sc16is7xx: refactor EFR lock
serial: sc16is7xx: reorder code to remove prototype declarations
serial: sc16is7xx: refactor FIFO access functions to increase commonality
serial: sc16is7xx: drop unneeded MODULE_ALIAS
serial: sc16is7xx: replace hardcoded divisor value with BIT() macro
serial: sc16is7xx: add explicit return for some switch default cases
serial: sc16is7xx: add macro for max number of UART ports
serial: sc16is7xx: add driver name to struct uart_driver
serial: sc16is7xx: use i2c_get_match_data()
serial: sc16is7xx: use spi_get_device_match_data()
serial: sc16is7xx: use DECLARE_BITMAP for sc16is7xx_lines bitfield
serial: sc16is7xx: improve do/while loop in sc16is7xx_irq()
serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq()
serial: sc16is7xx: set safe default SPI clock frequency
serial: sc16is7xx: add check for unsupported SPI modes during probe
serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in case of probe error
serial: 8250_exar: Set missing rs485_supported flag
serial: omap: do not override settings for RS485 support
serial: core, imx: do not set RS485 enabled if it is not supported
serial: core: make sure RS485 cannot be enabled when it is not supported
...
Here are the set of driver core and kernfs changes for 6.8-rc1. Nothing
major in here this release cycle, just lots of small cleanups and some
tweaks on kernfs that in the very end, got reverted and will come back
in a safer way next release cycle.
Included in here are:
- more driver core 'const' cleanups and fixes
- fw_devlink=rpm is now the default behavior
- kernfs tiny changes to remove some string functions
- cpu handling in the driver core is updated to work better on many
systems that add topologies and cpus after booting
- other minor changes and cleanups
All of the cpu handling patches have been acked by the respective
maintainers and are coming in here in one series. Everything has been
in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZaeOrg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymtcwCffzvKKkSY9qAp6+0v2WQNkZm1JWoAoJCPYUwF
If6wEoPLWvRfKx4gIoq9
=D96r
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here are the set of driver core and kernfs changes for 6.8-rc1.
Nothing major in here this release cycle, just lots of small cleanups
and some tweaks on kernfs that in the very end, got reverted and will
come back in a safer way next release cycle.
Included in here are:
- more driver core 'const' cleanups and fixes
- fw_devlink=rpm is now the default behavior
- kernfs tiny changes to remove some string functions
- cpu handling in the driver core is updated to work better on many
systems that add topologies and cpus after booting
- other minor changes and cleanups
All of the cpu handling patches have been acked by the respective
maintainers and are coming in here in one series. Everything has been
in linux-next for a while with no reported issues"
* tag 'driver-core-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (51 commits)
Revert "kernfs: convert kernfs_idr_lock to an irq safe raw spinlock"
kernfs: convert kernfs_idr_lock to an irq safe raw spinlock
class: fix use-after-free in class_register()
PM: clk: make pm_clk_add_notifier() take a const pointer
EDAC: constantify the struct bus_type usage
kernfs: fix reference to renamed function
driver core: device.h: fix Excess kernel-doc description warning
driver core: class: fix Excess kernel-doc description warning
driver core: mark remaining local bus_type variables as const
driver core: container: make container_subsys const
driver core: bus: constantify subsys_register() calls
driver core: bus: make bus_sort_breadthfirst() take a const pointer
kernfs: d_obtain_alias(NULL) will do the right thing...
driver core: Better advertise dev_err_probe()
kernfs: Convert kernfs_path_from_node_locked() from strlcpy() to strscpy()
kernfs: Convert kernfs_name_locked() from strlcpy() to strscpy()
kernfs: Convert kernfs_walk_ns() from strlcpy() to strscpy()
initramfs: Expose retained initrd as sysfs file
fs/kernfs/dir: obey S_ISGID
kernel/cgroup: use kernfs_create_dir_ns()
...
This doc hasn't been touched in a while, in the meantime some
new io schedulers were added (e.g. all of mq), some with ioprio
support.
Also reword the introduction to remove reference to CFQ and the
limitation that io priorities only work on reads, which is no longer
true.
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/a86cfdc8-016f-40f1-8b58-0cb15d2a792c@arm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove the errant blank lines to make the desired empty row separators
around the Fujitsu and ASR entries in the main table, rather than them
being their own separate tables which then look odd in the HTML view.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/b6637654eda761e224f828a44a7bbc1eadf2ef88.1705511145.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Here is the big set of char/misc and other driver subsystem changes for
6.8-rc1. Lots of stuff in here, but first off, you will get a merge
conflict in drivers/android/binder_alloc.c when merging this tree due to
changing coming in through the -mm tree.
The resolution of the merge issue can be found here:
https://lore.kernel.org/r/20231207134213.25631ae9@canb.auug.org.au
or in a simpler patch form in that thread:
https://lore.kernel.org/r/ZXHzooF07LfQQYiE@google.com
If there are issues with the merge of this file, please let me know.
Other than lots of binder driver changes (as you can see by the merge
conflicts) included in here are:
- lots of iio driver updates and additions
- spmi driver updates
- eeprom driver updates
- firmware driver updates
- ocxl driver updates
- mhi driver updates
- w1 driver updates
- nvmem driver updates
- coresight driver updates
- platform driver remove callback api changes
- tags.sh script updates
- bus_type constant marking cleanups
- lots of other small driver updates
All of these have been in linux-next for a while with no reported issues
(other than the binder merge conflict.)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZaeMMQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynWNgCfQ/Yz7QO6EMLDwHO5LRsb3YMhjL4AoNVdanjP
YoI7f1I4GBcC0GKNfK6s
=+Kyv
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem changes
for 6.8-rc1.
Other than lots of binder driver changes (as you can see by the merge
conflicts) included in here are:
- lots of iio driver updates and additions
- spmi driver updates
- eeprom driver updates
- firmware driver updates
- ocxl driver updates
- mhi driver updates
- w1 driver updates
- nvmem driver updates
- coresight driver updates
- platform driver remove callback api changes
- tags.sh script updates
- bus_type constant marking cleanups
- lots of other small driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (341 commits)
android: removed duplicate linux/errno
uio: Fix use-after-free in uio_open
drivers: soc: xilinx: add check for platform
firmware: xilinx: Export function to use in other module
scripts/tags.sh: remove find_sources
scripts/tags.sh: use -n to test archinclude
scripts/tags.sh: add local annotation
scripts/tags.sh: use more portable -path instead of -wholename
scripts/tags.sh: Update comment (addition of gtags)
firmware: zynqmp: Convert to platform remove callback returning void
firmware: turris-mox-rwtm: Convert to platform remove callback returning void
firmware: stratix10-svc: Convert to platform remove callback returning void
firmware: stratix10-rsu: Convert to platform remove callback returning void
firmware: raspberrypi: Convert to platform remove callback returning void
firmware: qemu_fw_cfg: Convert to platform remove callback returning void
firmware: mtk-adsp-ipc: Convert to platform remove callback returning void
firmware: imx-dsp: Convert to platform remove callback returning void
firmware: coreboot_table: Convert to platform remove callback returning void
firmware: arm_scpi: Convert to platform remove callback returning void
firmware: arm_scmi: Convert to platform remove callback returning void
...
-----BEGIN PGP SIGNATURE-----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=ri0M
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Reserve ECAM so we don't assign it to PCI BARs; this works around
bugs where BIOS included ECAM in a PNP0A03 host bridge window,
didn't reserve it via a PNP0C02 motherboard device, and didn't
allocate space for SR-IOV VF BARs (Bjorn Helgaas)
- Add MMCONFIG/ECAM debug logging (Bjorn Helgaas)
- Rename 'MMCONFIG' to 'ECAM' to match spec usage (Bjorn Helgaas)
- Log device type (Root Port, Switch Port, etc) during enumeration
(Bjorn Helgaas)
- Log bridges before downstream devices so the dmesg order is more
logical (Bjorn Helgaas)
- Log resource names (BAR 0, VF BAR 0, bridge window, etc)
consistently instead of a mix of names and "reg 0x10" (Puranjay
Mohan, Bjorn Helgaas)
- Fix 64GT/s effective data rate calculation to use 1b/1b encoding
rather than the 8b/10b or 128b/130b used by lower rates (Ilpo
Järvinen)
- Use PCI_HEADER_TYPE_* instead of literals in x86, powerpc, SCSI
lpfc (Ilpo Järvinen)
- Clean up open-coded PCIBIOS return code mangling (Ilpo Järvinen)
Resource management:
- Restructure pci_dev_for_each_resource() to avoid computing the
address of an out-of-bounds array element (the bounds check was
performed later so the element was never actually *read*, but it's
nicer to avoid even computing an out-of-bounds address) (Andy
Shevchenko)
Driver binding:
- Convert pci-host-common.c platform .remove() callback to
.remove_new() returning 'void' since it's not useful to return
error codes here (Uwe Kleine-König)
- Convert exynos, keystone, kirin from .remove() to .remove_new(),
which returns void instead of int (Uwe Kleine-König)
- Drop unused struct pci_driver.node member (Mathias Krause)
Virtualization:
- Add ACS quirk for more Zhaoxin Root Ports (LeoLiuoc)
Error handling:
- Log AER errors as "Correctable" (not "Corrected") or
"Uncorrectable" to match spec terminology (Bjorn Helgaas)
- Decode Requester ID when no error info found instead of printing
the raw hex value (Bjorn Helgaas)
Endpoint framework:
- Use a unique test pattern for each BAR in the pci_endpoint_test to
make it easier to debug address translation issues (Niklas Cassel)
Broadcom STB PCIe controller driver:
- Add DT property "brcm,clkreq-mode" and driver support for different
CLKREQ# modes to make ASPM L1.x states possible (Jim Quinlan)
Freescale Layerscape PCIe controller driver:
- Add suspend/resume support for Layerscape LS1043a and LS1021a,
including software-managed PME_Turn_Off and transitions between L0,
L2/L3_Ready Link states (Frank Li)
MediaTek PCIe controller driver:
- Clear MSI interrupt status before handler to avoid missing MSIs
that occur after the handler (qizhong cheng)
MediaTek PCIe Gen3 controller driver:
- Update mediatek-gen3 translation window setup to handle MMIO space
that is not a power of two in size (Jianjun Wang)
Qualcomm PCIe controller driver:
- Increase qcom iommu-map maxItems to accommodate SDX55 (five
entries) and SDM845 (sixteen entries) (Krzysztof Kozlowski)
- Describe qcom,pcie-sc8180x clocks and resets accurately (Krzysztof
Kozlowski)
- Describe qcom,pcie-sm8150 clocks and resets accurately (Krzysztof
Kozlowski)
- Correct the qcom "reset-name" property, previously incorrectly
called "reset-names" (Krzysztof Kozlowski)
- Document qcom,pcie-sm8650, based on qcom,pcie-sm8550 (Neil
Armstrong)
Renesas R-Car PCIe controller driver:
- Replace of_device.h with explicit of.h include to untangle header
usage (Rob Herring)
- Add DT and driver support for optional miniPCIe 1.5v and 3.3v
regulators on KingFisher (Wolfram Sang)
SiFive FU740 PCIe controller driver:
- Convert fu740 CONFIG_PCIE_FU740 dependency from SOC_SIFIVE to
ARCH_SIFIVE (Conor Dooley)
Synopsys DesignWare PCIe controller driver:
- Align iATU mapping for endpoint MSI-X (Niklas Cassel)
- Drop "host_" prefix from struct dw_pcie_host_ops members (Yoshihiro
Shimoda)
- Drop "ep_" prefix from struct dw_pcie_ep_ops members (Yoshihiro
Shimoda)
- Rename struct dw_pcie_ep_ops.func_conf_select() to
.get_dbi_offset() to be more descriptive (Yoshihiro Shimoda)
- Add Endpoint DBI accessors to encapsulate offset lookups (Yoshihiro
Shimoda)
TI J721E PCIe driver:
- Add j721e DT and driver support for 'num-lanes' for devices that
support x1, x2, or x4 Links (Matt Ranostay)
- Add j721e DT compatible strings and driver support for j784s4 (Matt
Ranostay)
- Make TI J721E Kconfig depend on ARCH_K3 since the hardware is
specific to those TI SoC parts (Peter Robinson)
TI Keystone PCIe controller driver:
- Hold power management references to all PHYs while enabling them to
avoid a race when one provides clocks to others (Siddharth
Vadapalli)
Xilinx XDMA PCIe controller driver:
- Remove redundant dev_err(), since platform_get_irq() and
platform_get_irq_byname() already log errors (Yang Li)
- Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq()
(Krzysztof Wilczyński)
- Fix xilinx_pl_dma_pcie_init_irq_domain() error return when
irq_domain_add_linear() fails (Harshit Mogalapalli)
MicroSemi Switchtec management driver:
- Do dma_mrpc cleanup during switchtec_pci_remove() to match its devm
ioremapping in switchtec_pci_probe(). Previously the cleanup was
done in stdev_release(), which used stale pointers if stdev->cdev
happened to be open when the PCI device was removed (Daniel
Stodden)
Miscellaneous:
- Convert interrupt terminology from "legacy" to "INTx" to be more
specific and match spec terminology (Damien Le Moal)
- In dw-xdata-pcie, pci_endpoint_test, and vmd, replace usage of
deprecated ida_simple_*() API with ida_alloc() and ida_free()
(Christophe JAILLET)"
* tag 'pci-v6.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
PCI: Fix kernel-doc issues
PCI: brcmstb: Configure HW CLKREQ# mode appropriate for downstream device
dt-bindings: PCI: brcmstb: Add property "brcm,clkreq-mode"
PCI: mediatek-gen3: Fix translation window size calculation
PCI: mediatek: Clear interrupt status before dispatching handler
PCI: keystone: Fix race condition when initializing PHYs
PCI: xilinx-xdma: Fix error code in xilinx_pl_dma_pcie_init_irq_domain()
PCI: xilinx-xdma: Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq()
PCI: rcar-gen4: Fix -Wvoid-pointer-to-enum-cast error
PCI: iproc: Fix -Wvoid-pointer-to-enum-cast warning
PCI: dwc: Add dw_pcie_ep_{read,write}_dbi[2] helpers
PCI: dwc: Rename .func_conf_select to .get_dbi_offset in struct dw_pcie_ep_ops
PCI: dwc: Rename .ep_init to .init in struct dw_pcie_ep_ops
PCI: dwc: Drop host prefix from struct dw_pcie_host_ops members
misc: pci_endpoint_test: Use a unique test pattern for each BAR
PCI: j721e: Make TI J721E depend on ARCH_K3
PCI: j721e: Add TI J784S4 PCIe configuration
PCI/AER: Use explicit register sizes for struct members
PCI/AER: Decode Requester ID when no error info found
PCI/AER: Use 'Correctable' and 'Uncorrectable' spec terms for errors
...
Core:
- Add a sysfs control for hotjoin
- Add fallback method for GETMXDS CCC
Drivers:
- cdns: fix prescale for i2c clock
- mipi-i3c-hci: more fixes now that the driver is used
- svc: hotjoin enabling/disabling support
-----BEGIN PGP SIGNATURE-----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=mysu
-----END PGP SIGNATURE-----
Merge tag 'i3c/for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"We are continuing to see more fixes as hardware is available and code
is actually getting tested.
Core:
- Add a sysfs control for hotjoin
- Add fallback method for GETMXDS CCC
Drivers:
- cdns: fix prescale for i2c clock
- mipi-i3c-hci: more fixes now that the driver is used
- svc: hotjoin enabling/disabling support"
* tag 'i3c/for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: document hotjoin sysfs entry
i3c: master: fix kernel-doc check warning
i3c: master: cdns: Update maximum prescaler value for i2c clock
i3c: master: fix Excess kernel-doc description warning
i3c: master: svc: return actual transfer data len
i3c: master: svc: rename read_len as actual_len
i3c: add actual_len in i3c_priv_xfer
i3c: master: svc: add hot join support
i3c: master: add enable(disable) hot join in sys entry
i3c: master: Fix build error
i3c: Add fallback method for GETMXDS CCC
i3c: mipi-i3c-hci: Add DMA bounce buffer for private transfers
i3c: mipi-i3c-hci: Handle I3C address header error in hci_cmd_v1_daa()
i3c: mipi-i3c-hci: Do not overallocate transfers in hci_cmd_v1_daa()
i3c: mipi-i3c-hci: Report NACK response from CCC command to core
Core changes:
- A new PINCTRL_GROUP_DESC() infrastructure macro is added and
used in different drivers, generic group description struct
group_desc is now used all over the place.
New drivers:
- New driver for the Texas Instruments TPS6494 Power Management IC.
- New driver for the Lantic PEF2256 framer pin multiplexer.
This IC has some pins that can be reconfigured in different
ways. The actual driver comes on an immutable branch with the
net WAN parts, the IC is some latest-and-greatest serial line
funnel for e.g. wireless access points.
- New subdriver for the Samsung Exynos Auto V920 pin controller,
used for automotive applications.
- New subdriver for the Samsung "GS101" SoC pin controller, this
is the Google "Tensor" SoC used in the Google Pixel 6.
- New subdriver for the Intel Meteor Point SoC pin controller.
- New subdriver for the Qualcomm SM8650 top level (TLMM) and LPASS pin
controllers.
- New subdriver for the Qualcomm X1E80100 top level (TLMM) pin
controller.
- New subdriver for the Qualcomm SM4450 top level (TLMM) pin
controller.
- The "single" pin controller now supports the Texas Instruments
J7200 SoC.
Improvements:
- Intel has created a new (Intel-)generic pin controller driver that
is now used by all contemporary Intel platforms.
- Intel is now also making use of some cleanup helpers.
- Enble 910 Ohm bias in the Intel Tangier driver.
- The Samsung driver now suppors irq_set_affinity() in it's IRQ chip
giving support for non wake up external gpio interrupts.
-----BEGIN PGP SIGNATURE-----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=kj/d
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"For this kernel cycle I managed an immutable branch for the PEF2256
WAN framer that has some pin control portions. It already landed in
your tree through the net pull request but here it is mentioned again.
The most interesting is perhaps the Samsung Exynos subdrivers for the
Tensor SoC used in Google Pixel 6 and the ExynosAuto subdriver for
automotive. Along with the earlier merged Tesla FSD subdriver it shows
some of the versatile uses of the Samsung Exynos silicon. It is also
used in the latest version of Axis Communications ARTPEC chips so it
is a very widely deployed SoC family.
We also have the Intel Meteor Lake SoC which I think is for laptops.
It's a pretty interesting chip with Xe graphics and integrated PCH.
Core changes:
- A new PINCTRL_GROUP_DESC() infrastructure macro is added and used
in different drivers, generic group description struct group_desc
is now used all over the place.
New drivers:
- New driver for the Texas Instruments TPS6494 Power Management IC.
- New driver for the Lantic PEF2256 framer pin multiplexer. This IC
has some pins that can be reconfigured in different ways. The
actual driver comes on an immutable branch with the net WAN parts,
the IC is some latest-and-greatest serial line funnel for e.g.
wireless access points.
- New subdriver for the Samsung Exynos Auto V920 pin controller, used
for automotive applications.
- New subdriver for the Samsung "GS101" SoC pin controller, this is
the Google "Tensor" SoC used in the Google Pixel 6.
- New subdriver for the Intel Meteor Point SoC pin controller.
- New subdriver for the Qualcomm SM8650 top level (TLMM) and LPASS
pin controllers.
- New subdriver for the Qualcomm X1E80100 top level (TLMM) pin
controller.
- New subdriver for the Qualcomm SM4450 top level (TLMM) pin
controller.
- The "single" pin controller now supports the Texas Instruments
J7200 SoC.
Improvements:
- Intel has created a new (Intel-)generic pin controller driver that
is now used by all contemporary Intel platforms.
- Intel is now also making use of some cleanup helpers.
- Enble 910 Ohm bias in the Intel Tangier driver.
- The Samsung driver now suppors irq_set_affinity() in it's IRQ chip
giving support for non wake up external gpio interrupts"
* tag 'pinctrl-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (112 commits)
pinctrl: samsung: constify iomem pointers
pinctrl: cy8c95x0: Cache muxed registers
dt-bindings: pinctrl: xilinx: Rename *gpio to *gpio-grp
pinctrl: qcom: lpass-lpi: remove duplicated include
dt-bindings: pinctrl: qcom: drop common properties and allow wakeup-parent
dt-bindings: pinctrl: qcom: drop common properties
dt-bindings: pinctrl: qcom,ipq5018-tlmm: use common TLMM bindings
dt-bindings: pinctrl: qcom,x1e80100-tlmm: restrict number of interrupts
dt-bindings: pinctrl: qcom,sm8650-tlmm: restrict number of interrupts
dt-bindings: pinctrl: qcom,sm8550-tlmm: restrict number of interrupts
dt-bindings: pinctrl: qcom,sdx75-tlmm: restrict number of interrupts
dt-bindings: pinctrl: qcom,sa8775p-tlmm: restrict number of interrupts
dt-bindings: pinctrl: qcom,qdu1000-tlmm: restrict number of interrupts
dt-bindings: pinctrl: qcom: create common LPASS LPI schema
pinctrl: qcom: sm4450: dd SM4450 pinctrl driver
dt-bindings: pinctrl: qcom: Add SM4450 pinctrl
dt-bindings: pinctrl: qcom,pmic-mpp: clean up example
pinctrl: intel: Add Intel Meteor Point pin controller and GPIO support
pinctrl: renesas: rzg2l: Add input enable to the Ethernet pins
pinctrl: renesas: rzg2l: Add output enable support
...
- Add support for Allwinner A100 RGB LED controller
- Add support for Maxim 5970 Dual Hot-swap controller
- New Device Support
- Add support for AW20108 to Awinic LED driver
- New Functionality
- Extend support for Net speeds to include; 2.5G, 5G and 10G
- Allow tx/rx and cts/dsr/dcd/rng TTY LEDS to be turned on and off via sysfs if required
- Add support for hardware control in AW200xx
- Fix-ups
- Use safer methods for string handling
- Improve error handling; return proper error values, simplify, avoid duplicates, etc
- Replace Mutex use with the Completion mechanism
- Fix include lists; alphabetise, remove unused, explicitly add used
- Use generic platform device properties
- Use/convert to new/better APIs/helpers/MACROs instead of hand-rolling implementations
- Device Tree binding adaptions/conversions/creation
- Continue work to remove superfluous platform .remove() call-backs
- Remove superfluous/defunct code
- Trivial; whitespace, unused variables, spelling, clean-ups, etc
- Avoid unnecessary duplicate locks
- Bug Fixes
- Repair Kconfig based dependency lists
- Ensure unused dynamically allocated data is freed after use
- Fix support for brightness control
- Add missing sufficient delays during reset to ensure correct operation
- Avoid division-by-zero issues
-----BEGIN PGP SIGNATURE-----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=/f98
-----END PGP SIGNATURE-----
Merge tag 'leds-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"New Drivers:
- Add support for Allwinner A100 RGB LED controller
- Add support for Maxim 5970 Dual Hot-swap controller
New Device Support:
- Add support for AW20108 to Awinic LED driver
New Functionality:
- Extend support for Net speeds to include; 2.5G, 5G and 10G
- Allow tx/rx and cts/dsr/dcd/rng TTY LEDS to be turned on and off
via sysfs if required
- Add support for hardware control in AW200xx
Fix-ups:
- Use safer methods for string handling
- Improve error handling; return proper error values, simplify,
avoid duplicates, etc
- Replace Mutex use with the Completion mechanism
- Fix include lists; alphabetise, remove unused, explicitly add used
- Use generic platform device properties
- Use/convert to new/better APIs/helpers/MACROs instead of
hand-rolling implementations
- Device Tree binding adaptions/conversions/creation
- Continue work to remove superfluous platform .remove() call-backs
- Remove superfluous/defunct code
- Trivial; whitespace, unused variables, spelling, clean-ups, etc
- Avoid unnecessary duplicate locks
Bug Fixes:
- Repair Kconfig based dependency lists
- Ensure unused dynamically allocated data is freed after use
- Fix support for brightness control
- Add missing sufficient delays during reset to ensure correct
operation
- Avoid division-by-zero issues"
* tag 'leds-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (45 commits)
leds: trigger: netdev: Add core support for hw not supporting fallback to LED sw control
leds: trigger: panic: Don't register panic notifier if creating the trigger failed
leds: sun50i-a100: Convert to be agnostic to property provider
leds: max5970: Add missing headers
leds: max5970: Make use of dev_err_probe()
leds: max5970: Make use of device properties
leds: max5970: Remove unused variable
leds: rgb: Drop obsolete dependency on COMPILE_TEST
leds: sun50i-a100: Avoid division-by-zero warning
leds: trigger: Remove unused function led_trigger_rename_static()
leds: qcom-lpg: Introduce a wrapper for getting driver data from a pwm chip
leds: gpio: Add kernel log if devm_fwnode_gpiod_get() fails
dt-bindings: leds: qcom,spmi-flash-led: Fix example node name
dt-bindings: leds: aw200xx: Fix led pattern and add reg constraints
dt-bindings: leds: awinic,aw200xx: Add AW20108 device
leds: aw200xx: Add support for aw20108 device
leds: aw200xx: Improve autodim calculation method
leds: aw200xx: Enable disable_locking flag in regmap config
leds: aw200xx: Add delay after software reset
dt-bindings: leds: aw200xx: Remove property "awinic,display-rows"
...
- Add support for Qualcomm PM8937 PMIC to QCOM SPMI PMIC
- Fix-ups
- Use/convert to new/better APIs/helpers/MACROs instead of hand-rolling implementations
- Device Tree binding adaptions/conversions/creation
- Improve error handling; return proper error values, simplify, avoid duplicates, etc
- Continue work to remove superfluous platform .remove() call-backs
- Move some exported symbols into private namespaces
- Clean-up and staticify PM related operations
- Trivial; spelling, whitespace, clean-ups, etc
- Fix include lists; alphabetise, remove unused, explicitly add used
- Bug Fixes
- Use PLATFORM_DEVID_AUTO to ensure multiple duplicate devices can co-exist
- Ensure debugfs register view is correctly presented
- Fix ordering and value issues in current use of clk_register_fractional_divider()
- Repair Kconfig based dependency lists
-----BEGIN PGP SIGNATURE-----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=R7SR
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull mfd updates from Lee Jones:
"New Device Support:
- Add support for Qualcomm PM8937 PMIC to QCOM SPMI PMIC
Fix-ups:
- Use/convert to new/better APIs/helpers/MACROs instead of
hand-rolling implementations
- Device Tree binding adaptions/conversions/creation
- Improve error handling; return proper error values, simplify,
avoid duplicates, etc
- Continue work to remove superfluous platform .remove() call-backs
- Move some exported symbols into private namespaces
- Clean-up and staticify PM related operations
- Trivial; spelling, whitespace, clean-ups, etc
- Fix include lists; alphabetise, remove unused, explicitly add used
Bug Fixes:
- Use PLATFORM_DEVID_AUTO to ensure multiple duplicate devices can
co-exist
- Ensure debugfs register view is correctly presented
- Fix ordering and value issues in current use of
clk_register_fractional_divider()
- Repair Kconfig based dependency lists"
* tag 'mfd-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (50 commits)
mfd: ti_am335x_tscadc: Fix TI SoC dependencies
dt-bindings: mfd: sprd: Add support for UMS9620
mfd: ab8500-sysctrl: Drop ancient charger
mfd: intel-lpss: Fix the fractional clock divider flags
mfd: tps6594: Add null pointer check to tps6594_device_init()
dt-bindings: mfd: pm8008: Clean up example node names
dt-bindings: mfd: hisilicon,hi6421-spmi-pmic: Clean up example
dt-bindings: mfd: hisilicon,hi6421-spmi-pmic: Fix regulator binding
dt-bindings: mfd: hisilicon,hi6421-spmi-pmic: Fix up binding reference
mfd: da9062: Simplify obtaining I2C match data
mfd: syscon: Fix null pointer dereference in of_syscon_register()
mfd: intel-lpss: Don't fail probe on success of pci_alloc_irq_vectors()
mfd: twl6030-irq: Revert to use of_match_device()
mfd: cs42l43: Correct order of include files to be alphabetical
mfd: cs42l43: Correct SoundWire port list
mfd: Fix a few spelling mistakes in PMIC header file comments
mfd: intel-lpss: Provide Intel LPSS PM ops structure
mfd: intel-lpss: Move exported symbols to INTEL_LPSS namespace
mfd: intel-lpss: Adjust header inclusions
mfd: intel-lpss: Use device_get_match_data()
...
The i.MX DSP remoteproc driver adds support for providing a resource
table, in order to enable IPC with the core.
The TI K3 DSP driver is transitioned to remove_new, error messages are
changed to use symbolic error codes, and dev_err_probe() is used where
applicable.
Support for the Qualcomm SC7280 audio, compute and WiFi co-processors
are added to the Qualcomm TrustZone based remoteproc driver.
-----BEGIN PGP SIGNATURE-----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=tuMM
-----END PGP SIGNATURE-----
Merge tag 'rproc-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- The i.MX DSP remoteproc driver adds support for providing a resource
table, in order to enable IPC with the core
- The TI K3 DSP driver is transitioned to remove_new, error messages
are changed to use symbolic error codes, and dev_err_probe() is used
where applicable
- Support for the Qualcomm SC7280 audio, compute and WiFi co-processors
are added to the Qualcomm TrustZone based remoteproc driver
* tag 'rproc-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
remoteproc: qcom_q6v5_pas: Add SC7280 ADSP, CDSP & WPSS
dt-bindings: remoteproc: qcom: sc7180-pas: Add SC7280 compatibles
dt-bindings: remoteproc: qcom: sc7180-pas: Fix SC7280 MPSS PD-names
remoteproc: k3-dsp: Convert to platform remove callback returning void
remoteproc: k3-dsp: Use symbolic error codes in error messages
remoteproc: k3-dsp: Suppress duplicate error message in .remove()
arm64: dts: imx8mp: Add reserve-memory nodes for DSP
remoteproc: imx_dsp_rproc: Add mandatory find_loaded_rsc_table op
This make virtio free driver_override upon removal. It also updates the
rpmsg documentation after earlier API updates.
-----BEGIN PGP SIGNATURE-----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=aycZ
-----END PGP SIGNATURE-----
Merge tag 'rpmsg-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg updates from Bjorn Andersson:
"This make virtio free driver_override upon removal. It also updates
the rpmsg documentation after earlier API updates"
* tag 'rpmsg-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: virtio: Free driver_override when rpmsg_remove()
doc: rmpsg: Update with rpmsg_endpoint
- Restore the system-wide asynchronous device resume optimization
removed by a recent concurrency fix (Rafael J. Wysocki).
- Make the intel_pstate cpufreq driver allow Meteor Lake systems to run
at somewhat higher frequencies (Srinivas Pandruvada).
- Make the PM QoS core code use kcalloc() for array allocation (Erick
Archer).
- Fix two PM-related typos in admin-guide (Erwan Velu).
-----BEGIN PGP SIGNATURE-----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=N3eJ
-----END PGP SIGNATURE-----
Merge tag 'pm-6.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These restore the asynchronous device resume optimization removed by
the previous PM merge, make the intel_pstate driver work better on
Meteor Lake systems, optimize the PM QoS core code slightly and fix up
typos in admin-guide.
Specifics:
- Restore the system-wide asynchronous device resume optimization
removed by a recent concurrency fix (Rafael J. Wysocki)
- Make the intel_pstate cpufreq driver allow Meteor Lake systems to
run at somewhat higher frequencies (Srinivas Pandruvada)
- Make the PM QoS core code use kcalloc() for array allocation (Erick
Archer)
- Fix two PM-related typos in admin-guide (Erwan Velu)"
* tag 'pm-6.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: Restore asynchronous device resume optimization
Documentation: admin-guide: PM: Fix two typos
cpufreq: intel_pstate: Update hybrid scaling factor for Meteor Lake
PM: QoS: Use kcalloc() instead of kzalloc()
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be resized.
guest_memfd files do however support PUNCH_HOLE, which can be used to
switch a memory area between guest_memfd and regular anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that guarantees
confidentiality (AMD PSP, Intel TDX module, or EL2 in the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new guest_memfd
and page attributes infrastructure. This is mostly useful for testing,
since there is no pKVM-like infrastructure to provide a meaningfully
reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages during
CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in non-leaf
TDP MMU SPTEs if a racing thread replaces a huge SPTE with a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually care
about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a stable TSC",
because some of them don't expect the "TSC stable" bit (added to the pvclock
ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM always
flushes on nested transitions, i.e. always satisfies flush requests. This
allows running bleeding edge versions of VMware Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV support.
- On AMD machines with vNMI, always rely on hardware instead of intercepting
IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters and other state
prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events using a
dedicated field instead of snapshotting the "previous" counter. If the
hardware PMC count triggers overflow that is recognized in the same VM-Exit
that KVM manually bumps an event count, KVM would pend PMIs for both the
hardware-triggered overflow and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be problematic for
subsystems that require no regressions for W=1 builds.
- Advertise all of the host-supported CPUID bits that enumerate IA32_SPEC_CTRL
"features".
- Don't force a masterclock update when a vCPU synchronizes to the current TSC
generation, as updating the masterclock can cause kvmclock's time to "jump"
unexpectedly, e.g. when userspace hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter fault paths,
partly as a super minor optimization, but mostly to make KVM play nice with
position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV "emulation"
at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB
base granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with
a prefix branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV
support to that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing flag
in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix the
various bugs that were lurking due to lack of said annotation.
There are two non-KVM patches buried in the middle of guest_memfd support:
fs: Rename anon_inode_getfile_secure() and anon_inode_getfd_secure()
mm: Add AS_UNMOVABLE to mark mapping as completely unmovable
The first is small and mostly suggested-by Christian Brauner; the second
a bit less so but it was written by an mm person (Vlastimil Babka).
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmWcMWkUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO15gf/WLmmg3SET6Uzw9iEq2xo28831ZA+
6kpILfIDGKozV5safDmMvcInlc/PTnqOFrsKyyN4kDZ+rIJiafJdg/loE0kPXBML
wdR+2ix5kYI1FucCDaGTahskBDz8Lb/xTpwGg9BFLYFNmuUeHc74o6GoNvr1uliE
4kLZL2K6w0cSMPybUD+HqGaET80ZqPwecv+s1JL+Ia0kYZJONJifoHnvOUJ7DpEi
rgudVdgzt3EPjG0y1z6MjvDBXTCOLDjXajErlYuZD3Ej8N8s59Dh2TxOiDNTLdP4
a4zjRvDmgyr6H6sz+upvwc7f4M4p+DBvf+TkWF54mbeObHUYliStqURIoA==
=66Ws
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"Generic:
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all
architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be
resized. guest_memfd files do however support PUNCH_HOLE, which can
be used to switch a memory area between guest_memfd and regular
anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that
guarantees confidentiality (AMD PSP, Intel TDX module, or EL2 in
the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new
guest_memfd and page attributes infrastructure. This is mostly
useful for testing, since there is no pKVM-like infrastructure to
provide a meaningfully reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages
during CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in
non-leaf TDP MMU SPTEs if a racing thread replaces a huge SPTE with
a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually
care about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a
stable TSC", because some of them don't expect the "TSC stable" bit
(added to the pvclock ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for
TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM
always flushes on nested transitions, i.e. always satisfies flush
requests. This allows running bleeding edge versions of VMware
Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV
support.
- On AMD machines with vNMI, always rely on hardware instead of
intercepting IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters
and other state prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events
using a dedicated field instead of snapshotting the "previous"
counter. If the hardware PMC count triggers overflow that is
recognized in the same VM-Exit that KVM manually bumps an event
count, KVM would pend PMIs for both the hardware-triggered overflow
and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be
problematic for subsystems that require no regressions for W=1
builds.
- Advertise all of the host-supported CPUID bits that enumerate
IA32_SPEC_CTRL "features".
- Don't force a masterclock update when a vCPU synchronizes to the
current TSC generation, as updating the masterclock can cause
kvmclock's time to "jump" unexpectedly, e.g. when userspace
hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter
fault paths, partly as a super minor optimization, but mostly to
make KVM play nice with position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the
code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV
"emulation" at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB base
granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with a prefix
branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV support to
that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list
selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing
flag in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix
the various bugs that were lurking due to lack of said annotation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (185 commits)
x86/kvm: Do not try to disable kvmclock if it was not enabled
KVM: x86: add missing "depends on KVM"
KVM: fix direction of dependency on MMU notifiers
KVM: introduce CONFIG_KVM_COMMON
KVM: arm64: Add missing memory barriers when switching to pKVM's hyp pgd
KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache
RISC-V: KVM: selftests: Add get-reg-list test for STA registers
RISC-V: KVM: selftests: Add steal_time test support
RISC-V: KVM: selftests: Add guest_sbi_probe_extension
RISC-V: KVM: selftests: Move sbi_ecall to processor.c
RISC-V: KVM: Implement SBI STA extension
RISC-V: KVM: Add support for SBI STA registers
RISC-V: KVM: Add support for SBI extension registers
RISC-V: KVM: Add SBI STA info to vcpu_arch
RISC-V: KVM: Add steal-update vcpu request
RISC-V: KVM: Add SBI STA extension skeleton
RISC-V: paravirt: Implement steal-time support
RISC-V: Add SBI STA extension definitions
RISC-V: paravirt: Add skeleton for pv-time support
RISC-V: KVM: Fix indentation in kvm_riscv_vcpu_set_reg_csr()
...
* Support for many new extensions in hwprobe, along with a handful of
cleanups.
* Various cleanups to our page table handling code, so we alwayse use
{READ,WRITE}_ONCE.
* Support for the which-cpus flavor of hwprobe.
* Support for XIP kernels has been resurrected.
-----BEGIN PGP SIGNATURE-----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=fLgG
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.8-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for many new extensions in hwprobe, along with a handful of
cleanups
- Various cleanups to our page table handling code, so we alwayse use
{READ,WRITE}_ONCE
- Support for the which-cpus flavor of hwprobe
- Support for XIP kernels has been resurrected
* tag 'riscv-for-linus-6.8-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (52 commits)
riscv: hwprobe: export Zicond extension
riscv: hwprobe: export Zacas ISA extension
riscv: add ISA extension parsing for Zacas
dt-bindings: riscv: add Zacas ISA extension description
riscv: hwprobe: export Ztso ISA extension
riscv: add ISA extension parsing for Ztso
use linux/export.h rather than asm-generic/export.h
riscv: Remove SHADOW_OVERFLOW_STACK_SIZE macro
riscv; fix __user annotation in save_v_state()
riscv: fix __user annotation in traps_misaligned.c
riscv: Select ARCH_WANTS_NO_INSTR
riscv: Remove obsolete rv32_defconfig file
riscv: Allow disabling of BUILTIN_DTB for XIP
riscv: Fixed wrong register in XIP_FIXUP_FLASH_OFFSET macro
riscv: Make XIP bootable again
riscv: Fix set_direct_map_default_noflush() to reset _PAGE_EXEC
riscv: Fix module_alloc() that did not reset the linear mapping permissions
riscv: Fix wrong usage of lm_alias() when splitting a huge linear mapping
riscv: Check if the code to patch lies in the exit section
riscv: Use the same CPU operations for all CPUs
...
- Clang coverage support
- Many cleanups from Benjamin Berg
- Various minor fixes
-----BEGIN PGP SIGNATURE-----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=oH6k
-----END PGP SIGNATURE-----
Merge tag 'uml-for-linus-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Richard Weinberger:
- Clang coverage support
- Many cleanups from Benjamin Berg
- Various minor fixes
* tag 'uml-for-linus-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: Mark 32bit syscall helpers as clobbering memory
um: Remove unused register save/restore functions
um: Rely on PTRACE_SETREGSET to set FS/GS base registers
Documentation: kunit: Add clang UML coverage example
arch: um: Add Clang coverage support
um: time-travel: fix time corruption
um: net: Fix return type of uml_net_start_xmit()
um: Always inline stub functions
um: Do not use printk in userspace trampoline
um: Reap winch thread if it fails
um: Do not use printk in SIGWINCH helper thread
um: Don't use vfprintf() for os_info()
um: Make errors to stop ptraced child fatal during startup
um: Drop NULL check from start_userspace
um: Drop support for hosts without SYSEMU_SINGLESTEP support
um: document arch_futex_atomic_op_inuser
um: mmu: remove stub_pages
um: Fix naming clash between UML and scheduler
um: virt-pci: fix platform map offset
Petre Rodan
Javier Carrasco
Linus Torvalds
Steve French
Alain Volmat
Philipp Zabel
Christian Loehle
Robin Murphy