The QCS8300 video clock controller is a derivative of SA8775P, but
QCS8300 has minor difference. Hence, reuse the SA8775P videocc bindings
for QCS8300 platform.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Link: https://lore.kernel.org/r/20250109-qcs8300-mm-patches-new-v4-5-63e8ac268b02@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The QCS8300 camera clock controller is a derivative of SA8775P, but has
an additional clock and minor differences. Hence, reuse the SA8775P
camera bindings and add additional clock required for QCS8300.
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Link: https://lore.kernel.org/r/20250109-qcs8300-mm-patches-new-v4-3-63e8ac268b02@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The QCS8300 GPU clock controller is a derivative of SA8775P, but has few
additional clocks and minor differences. Hence, reuse gpucc bindings of
SA8775P and add additional clocks required for QCS8300.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Link: https://lore.kernel.org/r/20250109-qcs8300-mm-patches-new-v4-1-63e8ac268b02@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The addition of DT bindings for enabling and tuning spread spectrum
clocking generation is available only for the main PLL of stm32f{4,7}
platforms.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250114182021.670435-3-dario.binacchi@amarulasolutions.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The patch converts st,stm32-rcc.txt to the JSON schema, but it does more
than that. The old bindings, in fact, only covered the stm32f{4,7}
platforms and not the stm32h7. Therefore, to avoid patch submission tests
failing, it was necessary to add the corresponding compatible (i. e.
st,stm32h743-rcc) and specify that, in this case, 3 are the clocks instead
of the 2 required for the stm32f{4,7} platforms.
Additionally, the old bindings made no mention of the st,syscfg property,
which is used by both the stm32f{4,7} and the stm32h7 platforms.
The patch also fixes the files referencing to the old st,stm32-rcc.txt.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250114182021.670435-2-dario.binacchi@amarulasolutions.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add an x1e80100 camcc binding. x1e80100 has two power-domain parents unlike
other similar camcc controllers.
Differentiate the new structure into a unique camcc definition. Other
similar camcc controller setups can then be easily added to this one.
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250102-b4-linux-next-24-11-18-dtsi-x1e80100-camss-v3-2-cb66d55d20cc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
SM6115 (and its derivatives or similar SoCs) has an LPASS clock
controller block which provides audio-related resets.
Add bindings for it.
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
[alexey.klimov slightly changed the commit message]
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://lore.kernel.org/r/20241212002551.2902954-2-alexey.klimov@linaro.org
[bjorn: Adjusted Konrad's address]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
It is marked as optional as some of the ZynqMP designs are having vcu_reset
(reset pin of VCU IP) driven by proc_sys_reset, proc_sys_reset is another
PL IP driven by the PS pl_reset. So, here the VCU reset is not driven by
axi_gpio or PS GPIO so there will be no GPIO entry.
Signed-off-by: Rohit Visavalia <rohit.visavalia@amd.com>
Link: https://lore.kernel.org/r/20250107044038.100945-3-rohit.visavalia@amd.com
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The camera clocks on SDM670 and SDM845 have no significant differences
that would require a change in the clock controller driver. The only
difference is the clock frequency at each level of the power domains,
which is not specified in the clock driver. There should still be a
compatible specific to the SoC, so add the compatible for SDM670 with
the SDM845 compatible as fallback.
Link: d4dc50c0a9/drivers/clk/qcom/camcc-sdm845.c (2048)
Suggested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Suggested-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/linux-arm-msm/7d26a62b-b898-4737-bd53-f49821e3b471@linaro.org
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241218231729.270137-8-mailingradian@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
All other paths referenced in the file follow a scheme starting from the
Linux root. The patch adjusts the single file that deviated from this
scheme, making it consistent with the others.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20241231150144.4035938-2-dario.binacchi@amarulasolutions.com
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The path of the two files was wrong even at the time they were added.
Let's fix them so they can be correctly referenced.
Fixes: 722dc8a1d5 ("dt-bindings: rcc: stm32: add new compatible for STM32MP13 SoC")
Fixes: 20107d7328 ("dt-bindings: rcc: Convert stm32mp1 rcc bindings to json-schema")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20241231150144.4035938-1-dario.binacchi@amarulasolutions.com
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Convert the OMAP gate clock device tree binding to json-schema.
Specify the creator of the original binding as a maintainer.
Choose GPL-only license because original binding was also GPL.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20250105170854.408875-3-andreas@kemnade.info
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Convert the OMAP gate clock device tree binding to json-schema.
Specify the creator of the original binding as a maintainer.
Choose GPL-only license because original binding was also GPL.
Clean up the examples during conversion to meet modern standards and
remove examples with no additional value.
Due to usage in code and existing devicetree binding, add the
ti,set-rate-parent property.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20250105170854.408875-2-andreas@kemnade.info
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The CMN PLL controller provides clocks to networking hardware blocks
and to GCC on Qualcomm IPQ9574 SoC. It receives input clock from the
on-chip Wi-Fi, and produces output clocks at fixed rates. These output
rates are predetermined, and are unrelated to the input clock rate.
The primary purpose of CMN PLL is to supply clocks to the networking
hardware such as PPE (packet process engine), PCS and the externally
connected switch or PHY device. The CMN PLL block also outputs fixed
rate clocks to GCC, such as 24 MHZ as XO clock and 32 KHZ as sleep
clock supplied to GCC.
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250103-qcom_ipq_cmnpll-v8-1-c89fb4d4849d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add bindings for the Qualcomm SM8750 Display Clock Controller (DISPCC).
Bindings are similar to existing SM8550 and SM8650 (same clock inputs),
but the clock hierarchy is quite different and these are not compatible
devices.
The binding header was copied from downstream sources, so I retained
original copyrights.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250106-sm8750-dispcc-v2-1-6f42beda6317@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add device tree bindings for the global clock controller on Qualcomm
SM8750 platform.
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241204-sm8750_master_clks-v3-5-1a8f31a53a86@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
X1P42100 is based on X1E80100 and largely reuses the X1E80100's GCC
block, adding a couple wires here and there.
Add a compatible for the X1P4 with a fallback to X1E80100. There are
some additions in the smaller one, that will be added in the future.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241221-topic-x1p4_clk-v1-1-dbaeccb74884@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
To make it easier for X1P4 and X1E to share a common device tree base,
extend the existing latter's GPUCC bindings and reuse them on the
former platform.
While not in the same file, it only makes sense to introduce the new
compatible in this commit as well.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241221-topic-x1p4_clk-v1-2-dbaeccb74884@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the `microchip,sama7d65-pmc` compatible string to the existing binding,
since the SAMA7D65 PMC shares the same properties and clock requirements
as the SAMA7G5.
Export MCK3 and MCK5 to be accessed and referenced in DT to assign to
the clocks property for sama7d65 SoC.
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/5252a28531deaee67af1edd8e72d45ca57783464.1733505542.git.Ryan.Wanner@microchip.com
[claudiu.beznea: use tabs instead of spaces in
include/dt-bindings/clock/at91.h]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Add dt-schema documentation for the Exynos990 SoC CMU.
This clock management unit has a topmost block (CMU_TOP)
that generates top clocks for other blocks. Currently the
only other block implemented is CMU_HSI0, which provides
clocks for the USB part of the SoC.
Also, device-tree binding definitions added for these blocks:
- CMU_TOP
- CMU_HSI0
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org>
Link: https://lore.kernel.org/r/20241209-exynos990-cmu-v4-1-57f07080f9e4@mentallysanemainliners.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Document the device tree bindings for the Renesas RZ/G3E SoC
Clock Pulse Generator (CPG).
Also define constants for the core clocks of the RZ/G3E SoC.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241203105005.103927-5-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Properties with variable number of items per each device are expected to
have widest constraints in top-level "properties:" block and further
customized (narrowed) in "if:then:". Add missing top-level constraints
for reg, clocks and clock-names.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240817094605.27185-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
By convention we expect first "compatible", then "reg" and then rest.
Order properties to match convention and what is in "required:" block.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240817094605.27185-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There are some differences b/w 5L35023 and 5P35023 Versa3 clock
generator variants but the same driver could be used with minimal
adjustments. The identified differences are PLL2 Fvco, the clock sel
bit for SE2 clock and different default values for some registers.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20241210170953.2936724-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
- Various clk driver cleanups
- MediaTek MT6735 SoC clks
- MediaTek MT7620, MT7628 and MT7688 MMC clks
- KUnit tests for clk-assigned-rates{,-u64}
- Add a driver for gated fixed rate clocks
* clk-cleanup:
clk: clk-loongson2: Fix potential buffer overflow in flexible-array member access
clk: Fix invalid execution of clk_set_rate
clk: clk-loongson2: Fix memory corruption bug in struct loongson2_clk_provider
clk: lan966x: make it selectable for ARCH_LAN969X
clk: clk-apple-nco: Add NULL check in applnco_probe
clk: starfive: jh7110-pll: Mark the probe function as __init
clk: sophgo: avoid integer overflow in sg2042_pll_recalc_rate()
clk: tegra: use clamp() in tegra_bpmp_clk_determine_rate()
clk: cdce925: make regmap_cdce925_bus constant
clk: Drop explicit initialization of struct i2c_device_id::driver_data to 0
clk: clk-qoriq: Replace of_node_put() with __free()
clk: Remove unused clk_hw_rate_is_protected
* clk-mediatek:
clk: en7523: map io region in a single block
clk: en7523: move en7581_reset_register() in en7581_clk_hw_init()
clk: en7523: fix estimation of fixed rate for EN7581
clk: en7523: introduce chip_scu regmap
clk: en7523: move clock_register in hw_init callback
clk: en7523: remove REG_PCIE*_{MEM,MEM_MASK} configuration
dt-bindings: clock: airoha: Update reg mapping for EN7581 SoC.
clk: mediatek: Add drivers for MT6735 syscon clock and reset controllers
dt-bindings: clock: mediatek: Add bindings for MT6735 syscon clock and reset controllers
clk: mediatek: mt6735-apmixedsys: Fix an error handling path in clk_mt6735_apmixed_probe()
clk: ralink: mtmips: add mmc related clocks for SoCs MT7620, MT7628 and MT7688
clk: ralink: mtmips: fix clocks probe order in oldest ralink SoCs
clk: ralink: mtmips: fix clock plan for Ralink SoC RT3883
clk: mediatek: clk-mt8188-topckgen: Remove univpll from parents of mfg_core_tmp
clk: mediatek: Add drivers for MediaTek MT6735 main clock and reset drivers
dt-bindings: clock: Add MediaTek MT6735 clock and reset bindings
clk: mediatek: drop two dead config options
* clk-kunit:
clk: Allow kunit tests to run without OF_OVERLAY enabled
clk: test: Add KUnit tests for clock-assigned-rates{-u64} DT properties
of: kunit: Extract some overlay boiler plate into macros
clk: test: Add test managed of_clk_add_hw_provider()
* clk-xilinx:
clk: clocking-wizard: move dynamic reconfig setup behind flag
dt-bindings: clock: xilinx: describe whether dynamic reconfig is enabled
clk: clocking-wizard: move clock registration to separate function
clk: clocking-wizard: use devres versions of clk_hw API
clk: clocking-wizard: use newer clk_hw API
clk: clocking-wizard: simplify probe/remove with devres helpers
* clk-fixed-gate:
clk: clk-gpio: add driver for gated-fixed-clocks
clk: clk-gpio: use dev_err_probe for gpio-get failure
clk: clk-gpio: update documentation for gpio-gate clock
dt-bindings: clocks: add binding for gated-fixed-clocks
In order to access the registers of the HW, we need to make sure that
the AXI bus clock is enabled. Hence let's increase the number of clocks
by one and add clock-names to differentiate between parent clocks and
the bus clock.
Fixes: 0e646c52cf ("clk: Add axi-clkgen driver")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20241029-axi-clkgen-fix-axiclk-v2-1-bc5e0733ad76@analog.com
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmc2d2QQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgcwPCACrv6yLademoSRjq5/OeaCtfSbmMFvsdrXd
WDsRX1Sey+ZMqM3KOrb2BZMdT38U4rS1aCTcGfTxS9MCqswhuOa+eafuqDJpo/f2
64SAfSMFUq+exk+DV+CZVBEuYQp0U38o8yuZRnqs4FhCfH4+NNPvsYScWUmxoTnG
uX0tGjBWUfiqzQVSzm9QgChebC4/tN+SChczGriLwMUk0Y4r1t/W0jTejkSKxS3v
5z+iNBXflMVeM/ddJp1lv3rgmJIxmhdpTTuNC+y+1nAcTic3rOJYw2tFjm2ze5se
C/lMxGHZXeILbBSQyGM2+lwjydJ5RZiBaz8fpkLseVk94Ko88BIg
=rn1j
-----END PGP SIGNATURE-----
Merge tag 'v6.13-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-bindings
Pull a YAML conversion of the rk3328 clock controller binding from Heiko
Stuebner.
* tag 'v6.13-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
dt-bindings: clock: convert rockchip,rk3328-cru.txt to YAML
Add dt bindings and documentation for the Marvell PXA1908 clock
controller.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Link: https://lore.kernel.org/r/20241104-pxa1908-lkml-v13-4-e050609b8d6c@skole.hr
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
clk-en7523 driver for EN7581 SoC is mapping all the scu memory region
while it is configuring the chip-scu one via a syscon. Update the reg
mapping definition for this device. This patch does not introduce any
backward incompatibility since the dts for EN7581 SoC is not upstream
yet.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/20241112-clk-en7581-syscon-v2-1-8ada5e394ae4@kernel.org
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add device tree bindings for syscon clock and reset controllers (IMGSYS,
MFGCFG, VDECSYS and VENCSYS).
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20241106111402.200940-2-y.oudjana@protonmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Imran Shaik
Stephen Boyd
Dario Binacchi
Bryan O'Donoghue
Daniil Titov
Konrad Dybcio
Rohit Visavalia
Rohit Visavalia
Richard Acayan
Dmitry Baryshkov
Andreas Kemnade
Bjorn Andersson
Luo Jie
Krzysztof Kozlowski
Taniya Das
Konrad Dybcio
Dharma Balasubiramani
Igor Belwon
Biju Das
Claudiu Beznea
Nuno Sa
Duje Mihanović
Lorenzo Bianconi
Yassine Oudjana