- Share a helper to convert from crypto_profile to mmc_host
- Respect quirk_max_rate for non-UHS SDIO card too
MMC host:
- Add DT bindings for the mmc-slot
- Clarify DT bindings for the mmc-controller
- bcm2835: Add support for system-wide suspend/resume PM
- dw_mmc-exynos: Add support for the exynos8895 variant
- meson-mx-sdio: Convert DT bindings to dtschema
- mtk-sd: Fixup use of two register ranges
- mtk-sd: Add support for ignoring cmd response CRC
- sdhci-esdhc-imx: enable 'SDHCI_QUIRK_NO_LED' quirk for S32G
- sdhci-msm: Correctly set the load for the regulator
- sdhci-msm: Convert to use custom crypto profile
- sdhci-of-at91: Add support for the microchip sama7d65 variant
-----BEGIN PGP SIGNATURE-----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=KHab
-----END PGP SIGNATURE-----
Merge tag 'mmc-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Share a helper to convert from crypto_profile to mmc_host
- Respect quirk_max_rate for non-UHS SDIO card too
MMC host:
- Add DT bindings for the mmc-slot
- Clarify DT bindings for the mmc-controller
- bcm2835: Add support for system-wide suspend/resume PM
- dw_mmc-exynos: Add support for the exynos8895 variant
- meson-mx-sdio: Convert DT bindings to dtschema
- mtk-sd: Fixup use of two register ranges
- mtk-sd: Add support for ignoring cmd response CRC
- sdhci-esdhc-imx: enable 'SDHCI_QUIRK_NO_LED' quirk for S32G
- sdhci-msm: Correctly set the load for the regulator
- sdhci-msm: Convert to use custom crypto profile
- sdhci-of-at91: Add support for the microchip sama7d65 variant"
* tag 'mmc-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (25 commits)
mmc: sdhci-msm: Correctly set the load for the regulator
mmc: hi3798mv200: Use syscon_regmap_lookup_by_phandle_args
mmc: Use of_property_present() for non-boolean properties
dt-bindings: mmc: samsung,exynos-dw-mshc: add specific compatible for exynos8895
mmc: sdhci-msm: convert to use custom crypto profile
mmc: crypto: add mmc_from_crypto_profile()
mmc: mtk-sd: Limit getting top_base to SoCs that require it
dt-bindings: mmc: mtk-sd: Document compatibles that need two register ranges
mmc: sdhci-acpi: Use devm_platform_ioremap_resource()
mmc: sdhci-acpi: Remove not so useful error message
dt-bindings: mmc: convert amlogic,meson-mx-sdio.txt to dtschema
dt-bindings: mmc: document mmc-slot
dt-bindings: mmc: controller: remove '|' when not needed
dt-bindings: mmc: controller: move properties common with slot out to mmc-controller-common
dt-bindings: mmc: controller: clarify the address-cells description
mmc: bcm2835: add suspend/resume pm support
dt-bindings: Drop Bhupesh Sharma from maintainers
mmc: core: don't include 'pm_wakeup.h' directly
mmc: mtk-sd: Add support for ignoring cmd response CRC
mmc: core: Introduce the MMC_RSP_R1B_NO_CRC response
...
BLK_MQ_F_SHOULD_MERGE is set for all tag_sets except those that purely
process passthrough commands (bsg-lib, ufs tmf, various nvme admin
queues) and thus don't even check the flag. Remove it to simplify the
driver interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241219060214.1928848-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The header clearly states that it does not want to be included directly,
only via 'device.h'. 'platform_device.h' works equally well. Remove the
direct inclusion.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Message-ID: <20241118072917.3853-9-wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The R1B response type with ignoring CRC is used in the mmc_cqe_recovery(),
introduce the MMC_RSP_R1B_NO_CRC response type to simplify the code.
Signed-off-by: Andy-ld Lu <andy-ld.lu@mediatek.com>
Message-ID: <20241126125041.16071-2-andy-ld.lu@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The card-quirk was added to limit the clock-rate for a card with UHS-mode
support, although let's respect the quirk for non-UHS mode too, to make the
behaviour consistent.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Message-ID: <1732268242-72799-1-git-send-email-shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Disabling card detect from the host's ->shutdown_pre() callback turned out
to not be the complete solution. More precisely, beyond the point when the
mmc_bus->shutdown() has been called, to gracefully power off the card, we
need to prevent card detect. Otherwise the mmc_rescan work may poll for the
card with a CMD13, to see if it's still alive, which then will fail and
hang as the card has already been powered off.
To fix this problem, let's disable mmc_rescan prior to power off the card
during shutdown.
Reported-by: Anthony Pighin <anthony.pighin@nokia.com>
Fixes: 66c915d09b ("mmc: core: Disable card detect during shutdown")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Closes: https://lore.kernel.org/all/BN0PR08MB695133000AF116F04C3A9FFE83212@BN0PR08MB6951.namprd08.prod.outlook.com/
Tested-by: Anthony Pighin <anthony.pighin@nokia.com>
Message-ID: <20241125122446.18684-1-ulf.hansson@linaro.org>
- Add support for Ultra Capacity SD cards (SDUC, 2TB to 128TB)
- Add support for Ultra High-Speed II SD cards (UHS-II)
- Use a reset control for pwrseq_simple
- Add SD card quirk for broken poweroff notification
- Use GFP_NOIO for SD ACMD22
MMC host:
- bcm2835: Introduce proper clock handling
- mtk-sd: Add support for the Host-Software-Queue interface
- mtk-sd: Add support for the mt7988/mt8196 variants
- mtk-sd: Fix a couple of error paths in ->probe()
- sdhci: Add interface to support UHS-II SD cards
- sdhci_am654: Fixup support for changing the signal voltage level
- sdhci-cadence: Add support for the Microchip PIC64GX variant
- sdhci-esdhc-imx: Add support for eMMC HW-reset
- sdhci-msm: Add support for the X1E80100/IPQ5424/SAR2130P/QCS615 variants
- sdhci-of-arasan: Add support for eMMC HW-reset
- sdhci-pci-gli: Add UHS-II support for the GL9767/GL9755 variants
MEMSTICK:
- A couple of minor updates
-----BEGIN PGP SIGNATURE-----
iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmc7NnoXHHVsZi5oYW5z
c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCnQPRAAkxvhptCjKuLBIMBrNZglQElp
Ncm8fXDiS72CvLwC3bp7rxognCKLVQGWc8GrxcBOxMSB5eiDyPe6xcLLQ2Zrm4l/
msnfP29VDtmWw3K1iC2Uzo0vlMWYyRFX0OK3fz3d6WL0dE6TXy5adsdy9BmdxGXk
vpDgiTWkSZcoT/upuXs8/0N87eSgLUFzZ8uPNP+aHtF4AVWIwhJ3Y1MKqdfGrUlw
7b9bFeh6DelA+jGDxsPsqSwDBh2CDDP3YaPFYf4yyaeTRJmp6DMSEqjDifBa+hDn
wkwNGj9bN05HeRN3TfsF/Z22LcaPcbWlLYh8p06h+Ws+R/2KxAXdV3oWnKNLQB9R
5WIdgb7HBD2OS2RymPeHygPPGt6zgxk55UfTBwchg7fHyugXvpcT/JDS2mbPQT4w
Ty4s217wBn6Kkt4/8fWhHyG/rKBTq02Etmdery4AAM49M2iPvf+edio53FLnskrq
xB8kYn5UZkk9dQ+GseC4+tXe8A1G/sxh/E2aJ/b15Mc9Mh1/BqL3g2532A+z6x5Q
8o4nyztCJhKWtfYxo1slnWzF+Axrz6ZXgVYh5MecMk9EjKVcX6oN+FGpiK/cg3dQ
7FFyzf+YGwdnOhuHhdBG0NTbvKvIRA0rMQ3xvhsfXqCI206j7FZNpWOxXYn36Lgt
oZlprarw04AoECCg5Ko=
=LGdl
-----END PGP SIGNATURE-----
Merge tag 'mmc-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Add support for Ultra Capacity SD cards (SDUC, 2TB to 128TB)
- Add support for Ultra High-Speed II SD cards (UHS-II)
- Use a reset control for pwrseq_simple
- Add SD card quirk for broken poweroff notification
- Use GFP_NOIO for SD ACMD22
MMC host:
- bcm2835: Introduce proper clock handling
- mtk-sd: Add support for the Host-Software-Queue interface
- mtk-sd: Add support for the mt7988/mt8196 variants
- mtk-sd: Fix a couple of error paths in ->probe()
- sdhci: Add interface to support UHS-II SD cards
- sdhci_am654: Fixup support for changing the signal voltage level
- sdhci-cadence: Add support for the Microchip PIC64GX variant
- sdhci-esdhc-imx: Add support for eMMC HW-reset
- sdhci-msm: Add support for the X1E80100/IPQ5424/SAR2130P/QCS615 variants
- sdhci-of-arasan: Add support for eMMC HW-reset
- sdhci-pci-gli: Add UHS-II support for the GL9767/GL9755 variants
MEMSTICK:
- A couple of minor updates"
* tag 'mmc-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (78 commits)
mmc: pwrseq_simple: Handle !RESET_CONTROLLER properly
mmc: mtk-sd: Fix MMC_CAP2_CRYPTO flag setting
mmc: mtk-sd: Fix error handle of probe function
mmc: core: Correction a warning caused by incorrect type in assignment for UHS-II
mmc: sdhci-esdhc-imx: Update esdhc sysctl dtocv bitmask
mmc: sdhci-esdhc-imx: Implement emmc hardware reset
mmc: core: Correct type in variable assignment for UHS-II
mmc: sdhci-uhs2: correction a warning caused by incorrect type in argument
mmc: sdhci-uhs2: Remove unnecessary variables
mmc: sdhci-uhs2: Correct incorrect type in argument
mmc: sdhci: Make MMC_SDHCI_UHS2 config symbol invisible
mmc: sdhci-uhs2: Remove unnecessary NULL check
mmc: core: Fix error paths for UHS-II card init and re-init
mmc: core: Add error handling of sd_uhs2_power_up()
mmc: core: Simplify sd_uhs2_power_up()
mmc: bcm2835: Introduce proper clock handling
mmc: bcm2835: Fix type of current clock speed
dt-bindings: mmc: Add sdhci compatible for QCS615
mmc: core: Use GFP_NOIO in ACMD22
dt-bindings: mmc: sdhci-msm: Add SAR2130P compatible
...
The recent introduction of reset control in pwrseq_simple introduced
a regression for platforms without RESET_CONTROLLER support, because
devm_reset_control_get_optional_shared() would return NULL and make all
resets no-ops. Instead of enforcing this dependency, rely on this behavior
to determine reset support. As a benefit we can get the rid of the
use_reset flag.
Fixes: 73bf4b7381 ("mmc: pwrseq_simple: add support for one reset control")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Message-ID: <20241108130647.8281-1-wahrenst@gmx.net>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
There is a type issue in the assignment in the sd_uhs2_dev_init()
that will generate a warning when building the kernel.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411051248.wvjHSFNj-lkp@intel.com/
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Message-ID: <20241105102901.351429-1-victorshihgli@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
There is a type issue in assignment in the sd_uhs2_dev_init(),
sd_uhs2_enum() and sd_uhs2_config_write() that will generate
a warning when building the kernel. Let's fix it.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410260423.15jvE6qc-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202410261827.7h8YK8u2-lkp@intel.com/
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Message-ID: <20241101104416.4954-2-victorshihgli@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The error path didn't manage the removal of the allocated mmc_card
correctly. Let's fix this to avoid potential memory leaks.
While at it, move the assignment of host->card to slightly later in the
init process and drop also a somewhat silly dev_warn() when CMD8 fails.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Message-ID: <20241029131752.226764-4-ulf.hansson@linaro.org>
In sd_uhs2_reinit() the call to sd_uhs2_power_up() lacks error handling, so
let's add it.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Message-ID: <20241029131752.226764-3-ulf.hansson@linaro.org>
Drop the redundant err-parameter and just return the result from
host->ops->uhs2_control() instead.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Message-ID: <20241029131752.226764-2-ulf.hansson@linaro.org>
While reviewing the SDUC series, Adrian made a comment concerning the
memory allocation code in mmc_sd_num_wr_blocks() - see [1].
Prevent memory allocations from triggering I/O operations while ACMD22
is in progress.
[1] https://lore.kernel.org/linux-mmc/3016fd71-885b-4ef9-97ed-46b4b0cb0e35@intel.com/
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 051913dada ("mmc_block: do not DMA to stack")
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Cc: stable@vger.kernel.org
Message-ID: <20241021153227.493970-1-avri.altman@wdc.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reset controls being refcounted, they allow to share gpios across
drivers. Right now, reset framework and reset-gpio driver supports only
one reset gpio, so add support for one single reset control. If more
than one reset gpio is configured in the device tree, then fallback to
classic gpio control.
Signed-off-by: Catalin Popescu <catalin.popescu@leica-geosystems.com>
Message-ID: <20241017131957.1171323-1-catalin.popescu@leica-geosystems.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Embed UHS-II access/control functionality into the MMC request
processing flow.
Signed-off-by: Jason Lai <jason.lai@genesyslogic.com.tw>
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Message-ID: <20241018105333.4569-2-victorshihgli@gmail.com>
[Ulf: A couple of cleanups and fixed sd_uhs2_power_off()]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Attach partitions fwnode if found in mmc-card and register disk with it.
This permits block partition to reference the node and register a
partition table defined in DT for the special case for embedded device
that doesn't have a partition table flashed but have an hardcoded
partition table passed from the system.
JEDEC BOOT partition boot0/boot1 are supported but in DT we refer with
the JEDEC name of boot1 and boot2 to better adhere to documentation.
Also JEDEC GP partition gp0/1/2/3 are supported but in DT we refer with
the JEDEC name of gp1/2/3/4 to better adhere to documentration.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241002221306.4403-5-ansuelsmth@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move some part out from mmc_go_idle() into a new function called
__mmc_go_idle(), allowing it to be re-used, which is shown from a
subsequent change.
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Link: https://lore.kernel.org/r/20240913102836.6144-7-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
To allow an additional external regulator to be controlled by an mmc host
driver, let's add support for a vqmmc2 regulator to the mmc core.
For an SD UHS-II interface the vqmmc2 regulator may correspond to the so
called vdd2 supply, as described by the SD spec. Initially, only 1.8V is
needed, hence limit the new helper function, mmc_regulator_set_vqmmc2() to
this too.
Note that, to allow for flexibility mmc host drivers need to manage the
enable/disable of the vqmmc2 regulator themselves, while the regulator is
looked up through the common mmc_regulator_get_supply().
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20240913102836.6144-5-victorshihgli@gmail.com
To inform the users about SD UHS-II cards, let's extend the print at card
insertion with a "UHS-II" substring. Within this change, it seems
reasonable to convert from using "ultra high speed" into "UHS-I speed", for
the UHS-I type, as it should makes it more clear.
Note that, the new print for UHS-II cards doesn't include the actual
selected speed mode. Instead, this is going to be added from subsequent
change.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20240913102836.6144-4-victorshihgli@gmail.com
The SD UHS-II interface was introduced to the SD spec v4.00 several years
ago. The interface is fundamentally different from an electrical and a
protocol point of view, comparing to the legacy SD interface.
However, the legacy SD protocol is supported through a specific transport
layer (SD-TRAN) defined in the UHS-II addendum of the spec. This allows the
SD card to be managed in a very similar way as a legacy SD card, hence a
lot of code can be re-used to support these new types of cards through the
mmc subsystem.
Moreover, an SD card that supports the UHS-II interface shall also be
backwards compatible with the legacy SD interface, which allows a UHS-II
card to be inserted into a legacy slot. As a matter of fact, this is
already supported by mmc subsystem as of today.
To prepare to add support for UHS-II, this change puts the basic foundation
in the mmc core in place, allowing it to be more easily reviewed before
subsequent changes implements the actual support.
Basically, the approach here adds a new UHS-II bus_ops type and adds a
separate initialization path for the UHS-II card. The intent is to avoid us
from sprinkling the legacy initialization path, but also to simplify
implementation of the UHS-II specific bits.
At this point, there is only one new host ops added to manage the various
ios settings needed for UHS-II. Additional host ops that are needed, are
being added from subsequent changes.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20240913102836.6144-3-victorshihgli@gmail.com
The current print of the bus speed mode in mmc_add_card() has grown over
the years and is now difficult to parse. Let's clean up the code and also
take the opportunity to properly announce "DDR" for eMMCs as
"high speed DDR", which is according to the eMMC spec.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20240913102836.6144-2-victorshihgli@gmail.com
hsq allows to get more in-flight requests from mmc core, which can be
prepared in advance and be issued asynchronously to the completion of
the preceding request (in atomic context). This is presumably broken
though by the mandatory CMD22 for SDUC.
We plan to make it work, but only as an improvement on top of the
initial support for SDUC.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20241006051148.160278-10-avri.altman@wdc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Planning to ameliorate it in the very near future.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20241006051148.160278-9-avri.altman@wdc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
ACMD22 is used to verify the previously write operation. Normally, it
returns the number of written sectors as u32. SDUC, however, returns it
as u64. This is not a superfluous requirement, because SDUC writes may
exceeds 2TB. For Linux mmc however, the previously write operation
could not be more than the block layer limits, thus we make room for a
u64 and cast the returning value to u32.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20241006051148.160278-8-avri.altman@wdc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[Stephen Rothwell: Fix build error when moving to new rc from Linus's tree]
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Preparing for SDUC, Allow the erase address to be larger beyond a 32 bit
address.
Tested-by: Ricky WU <ricky_wu@realtek.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20241006051148.160278-6-avri.altman@wdc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
For open-ended read/write - just send CMD22 before issuing the command.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20241006051148.160278-5-avri.altman@wdc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The SDUC spec expects CMD22 to get squeezed between CMD23 and the
read/write command, e.g. CMD23->CMD22->CMD18 and CMD23->CMD22->CMD25.
At this early stage of adoption, we want to avoid an amid stream of
fixes & quirks of bogus hw, that tends to apply extra logic specifically
around auto-cmd12 & auto-cmd23.
Let's leave close-ended out for now, and re-consider this should those
cards become ubiquitous, if any.
It also means that BLK_FEAT_FUA will not be used for I/O, but instead we
will rely on BLK_FEAT_WRITE_CACHE.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20241006051148.160278-4-avri.altman@wdc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
SDUC memory addressing spans beyond 2TB and up to 128TB. Therefore, 38
bits are required to access the entire memory space of all sectors.
Those extra 6 bits are to be carried by CMD22 prior of sending
read/write/erase commands: CMD17, CMD18, CMD24, CMD25, CMD32, and CMD33.
CMD22 will carry the higher order 6 bits, and must precedes any of the
above commands even if it targets sector < 2TB.
No error related to address or length is indicated in CMD22 but rather
in the read/write command itself.
Tested-by: Ricky WU <ricky_wu@realtek.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20241006051148.160278-3-avri.altman@wdc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Ultra Capacity SD cards (SDUC) was already introduced in SD7.0. Those
cards support capacity larger than 2TB and up to including 128TB.
ACMD41 was extended to support the host-card handshake during
initialization. The card expects that the HCS & HO2T bits to be set in
the command argument, and sets the applicable bits in the R3 returned
response. On the contrary, if a SDUC card is inserted to a
non-supporting host, it will never respond to this ACMD41 until
eventually, the host will timed out and give up.
Also, add SD CSD version 3.0 - designated for SDUC, and properly parse
the csd register as the c_size field got expanded to 28 bits.
Do not enable SDUC for now - leave it to the last patch in the series.
Tested-by: Ricky WU <ricky_wu@realtek.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20241006051148.160278-2-avri.altman@wdc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/mmc to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240927145832.754697-2-u.kleine-koenig@baylibre.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
GIGASTONE Gaming Plus microSD cards manufactured on 02/2022 report that
they support poweroff notification and cache, but they are not working
correctly.
Flush Cache bit never gets cleared in sd_flush_cache() and Poweroff
Notification Ready bit also never gets set to 1 within 1 second from the
end of busy of CMD49 in sd_poweroff_notify().
This leads to I/O error and runtime PM error state.
I observed that the same card manufactured on 01/2024 works as expected.
This problem seems similar to the Kingston cards fixed with
commit c467c8f081 ("mmc: Add MMC_QUIRK_BROKEN_SD_CACHE for Kingston
Canvas Go Plus from 11/2019") and should be handled using quirks.
CID for the problematic card is here.
12345641535443002000000145016200
Manufacturer ID is 0x12 and defined as CID_MANFID_GIGASTONE as of now,
but would like comments on what naming is appropriate because MID list
is not public and not sure it's right.
Signed-off-by: Keita Aihara <keita.aihara@sony.com>
Link: https://lore.kernel.org/r/20240913094417.GA4191647@sony.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Since upstream commit 334304ac2b ("dma-mapping: don't return errors
from dma_set_max_seg_size") calling dma_set_max_seg_size() on a device
not supporting DMA results in a warning traceback. This is seen when
booting the sifive_u machine from SD. The underlying SPI controller
(sifive,spi0 compatible) explicitly sets dma_mask to NULL.
Avoid the backtrace by only calling dma_set_max_seg_size() if DMA is
supported.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes: 334304ac2b ("dma-mapping: don't return errors from dma_set_max_seg_size")
Link: https://lore.kernel.org/r/20240924210123.2288529-1-linux@roeck-us.net
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
no_llseek had been defined to NULL two years ago, in commit 868941b144
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In case vmmc or vqmmc regulator is not available yet, use dev_err_probe
in order to set a deferred probe reason. This is a helpful hint in
/sys/kernel/debug/devices_deferred
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20240911090910.3060749-1-alexander.stein@ew.tq-group.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Prevent build error when CONFIG_RPMB=m and CONFIG_MMC_BLOCK=y by adding
a dependency to CONFIG_RPMB for CONFIG_MMC_BLOCK block so the RPMB
subsystem always is reachable if configured. This means that
CONFIG_MMC_BLOCK automatically becomes compiled as a module if
CONFIG_RPMB is compiled as a module. If CONFIG_RPMB isn't configured or
is configured as built-in, CONFIG_MMC_BLOCK will remain unchanged.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409021448.RSvcBPzt-lkp@intel.com/
Fixes: 7852028a35 ("mmc: block: register RPMB partition with the RPMB subsystem")
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240902151231.3705204-1-jens.wiklander@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The UNSTUFF_BITS macro, which is defined in both drivers/mmc/core/mmc.c
and drivers/mmc/core/sd.c, has been converted to an inline function to
improve readability, maintainability, and type safety.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240902123331.3566447-1-avri.altman@wdc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
simple_strtoul() is obsolete and lacks proper error handling, making it
unsafe for converting strings to unsigned long values. Replace it with
kstrtoul(), which provides robust error checking and better safety.
This change improves the reliability of the string-to-integer conversion
and aligns with current kernel coding standards. Error handling is added
to catch conversion failures, returning -EINVAL when input is invalid.
Issue reported by checkpatch:
- WARNING: simple_strtoul is obsolete, use kstrtoul instead
Signed-off-by: Riyan Dhiman <riyandhiman14@gmail.com>
Link: https://lore.kernel.org/r/20240901182244.45543-1-riyandhiman14@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Calculate the size from pointer instead of
struct to adhere to linux kernel coding style.
Issue reported by checkpatch.
This commit has no functional changes.
Signed-off-by: Riyan Dhiman <riyandhiman14@gmail.com>
Link: https://lore.kernel.org/r/20240901173309.7124-1-riyandhiman14@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Replace with already defined values for readability. While at it, let's
also change the mode-parameter from an int to bool, as the only used values
are 0 or 1.
Signed-off-by: Chanwoo Lee <cw9316.lee@samsung.com>
Link: https://lore.kernel.org/r/20240829024709.402285-1-cw9316.lee@samsung.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Register eMMC RPMB partition with the RPMB subsystem and provide
an implementation for the RPMB access operations abstracting
the actual multi step process.
Add a callback to extract the needed device information at registration
to avoid accessing the struct mmc_card at a later stage as we're not
holding a reference counter for this struct.
Taking the needed reference to md->disk in mmc_blk_alloc_rpmb_part()
instead of in mmc_rpmb_chrdev_open(). This is needed by the
route_frames() function pointer in struct rpmb_ops.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Tested-by: Manuel Traut <manut@mecka.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20240814153558.708365-3-jens.wiklander@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Applying MMC_QUIRK_BROKEN_SD_CACHE is broken, as the card's SD quirks are
referenced in sd_parse_ext_reg_perf() prior to the quirks being initialized
in mmc_blk_probe().
To fix this problem, let's split out an SD-specific list of quirks and
apply in mmc_sd_init_card() instead. In this way, sd_read_ext_regs() to has
the available information for not assigning the SD_EXT_PERF_CACHE as one of
the (un)supported features, which in turn allows mmc_sd_init_card() to
properly skip execution of sd_enable_cache().
Fixes: c467c8f081 ("mmc: Add MMC_QUIRK_BROKEN_SD_CACHE for Kingston Canvas Go Plus from 11/2019")
Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
Co-developed-by: Keita Aihara <keita.aihara@sony.com>
Signed-off-by: Keita Aihara <keita.aihara@sony.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240820230631.GA436523@sony.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
If the "test->highmem = alloc_pages()" allocation fails then calling
__free_pages(test->highmem) will result in a NULL dereference. Also
change the error code to -ENOMEM instead of returning success.
Fixes: 2661081f5a ("mmc_test: highmem tests")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/8c90be28-67b4-4b0d-a105-034dc72a0b31@stanley.mountain
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases to
get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions. It's not all that useful for a "write a whole driver
in rust" type of thing, but the firmware bindings do help out the
phy rust drivers, and the driver core bindings give a solid base on
which others can start their work. There is still a long way to go
here before we have a multitude of rust drivers being added, but
it's a great first step.
- driver core const api changes. This reached across all bus types,
and there are some fix-ups for some not-common bus types that
linux-next and 0-day testing shook out. This work is being done to
help make the rust bindings more safe, as well as the C code, moving
toward the end-goal of allowing us to put driver structures into
read-only memory. We aren't there yet, but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZqH+aQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymoOQCfVBdLcBjEDAGh3L8qHRGMPy4rV2EAoL/r+zKm
cJEYtJpGtWX6aAtugm9E
=ZyJV
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions.
It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.
There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.
- driver core const api changes.
This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.
This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...
- Convert from using tasklet to the BH workqueue
- dw_mmc-bluefield: Add support for eMMC HW reset
- mmc_spi: Allow spi controllers incapable of lower than 400kHz
- sdhci: Rework code to eliminate SDHCI_QUIRK_UNSTABLE_RO_DETECT
- sdhci-brcmstb: Add support for the BCM2712 variant
- sdhci-esdhc-imx: Disable card-detect as system wakeup on S32G platforms
- sdhci-msm: Add support for the SDX75 variant
- sdhci-of-dwcmshc: Enable CQE support for some Rockchip variants
- sdhci-of-esdhc: Convert DT-bindings to yaml
- sdhci-sprd: Convert DT-bindings to yaml
MEMSTICK:
- rtsx_pci_ms: Remove the unused Realtek PCI memstick driver
-----BEGIN PGP SIGNATURE-----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=0Oa4
-----END PGP SIGNATURE-----
Merge tag 'mmc-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC host:
- Convert from using tasklet to the BH workqueue
- dw_mmc-bluefield: Add support for eMMC HW reset
- mmc_spi: Allow spi controllers incapable of lower than 400kHz
- sdhci: Rework code to eliminate SDHCI_QUIRK_UNSTABLE_RO_DETECT
- sdhci-brcmstb: Add support for the BCM2712 variant
- sdhci-esdhc-imx: Disable card-detect as system wakeup on S32G platforms
- sdhci-msm: Add support for the SDX75 variant
- sdhci-of-dwcmshc: Enable CQE support for some Rockchip variants
- sdhci-of-esdhc: Convert DT-bindings to yaml
- sdhci-sprd: Convert DT-bindings to yaml
MEMSTICK:
- rtsx_pci_ms: Remove the unused Realtek PCI memstick driver"
* tag 'mmc-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (26 commits)
MAINTAINERS: add 's32@nxp.com' as relevant mailing list for 'sdhci-esdhc-imx' driver
mmc: sdhci-esdhc-imx: obtain the 'per' clock rate after its enablement
mmc: sdhci-esdhc-imx: disable card detect wake for S32G based platforms
dt-bindings: mmc: sdhci-sprd: convert to YAML
mmc: davinci_mmc: report all possible bus widths
mmc: dw_mmc-bluefield: Add support for eMMC HW reset
mmc: dw_mmc: Add support for platform specific eMMC HW reset
mmc: sdhci_am654: Constify struct regmap_config
mmc: Convert from tasklet to BH workqueue
mmc: sdhi: Convert from tasklet to BH workqueue
mmc: mmc_spi: allow for spi controllers incapable of getting as low as 400k
memstick: rtsx_pci_ms: Remove Realtek PCI memstick driver
MAINTAINERS: drop entry for VIA SD/MMC controller
mmc: tmio: Remove obsolete .set_pwr() callback()
mfd: tmio: Remove obsolete .set_clk_div() callback
mmc: sdhci-brcmstb: Add ARCH_BCM2835 option
mmc: sdhci: Eliminate SDHCI_QUIRK_UNSTABLE_RO_DETECT
dt-bindings: mmc: Convert fsl-esdhc.txt to yaml
dt-bindings: mmc: mmc-spi-slot: Change voltage-ranges to uint32-matrix
mmc: add missing MODULE_DESCRIPTION() macros
...
In the match() callback, the struct device_driver * should not be
changed, so change the function callback to be a const *. This is one
step of many towards making the driver core safe to have struct
device_driver in read-only memory.
Because the match() callback is in all busses, all busses are modified
to handle this properly. This does entail switching some container_of()
calls to container_of_const() to properly handle the constant *.
For some busses, like PCI and USB and HV, the const * is cast away in
the match callback as those busses do want to modify those structures at
this point in time (they have a local lock in the driver structure.)
That will have to be changed in the future if they wish to have their
struct device * in read-only-memory.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Alex Elder <elder@kernel.org>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/2024070136-wrongdoer-busily-01e8@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mmc/host/of_mmc_spi.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mmc/host/tmio_mmc_core.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mmc/host/renesas_sdhi_core.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mmc/core/mmc_core.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mmc/core/pwrseq_simple.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mmc/core/pwrseq_sd8787.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mmc/core/pwrseq_emmc.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mmc/core/sdio_uart.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # for TMIO and SDHI
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20240611-md-drivers-mmc-v2-1-2ef2cbcdc061@quicinc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Move the stable_writes flag into the queue_limits feature field so that
it can be set atomically with the queue frozen.
The flag is now inherited by blk_stack_limits, which greatly simplifies
the code in dm, and fixed md which previously did not pass on the flag
set on lower devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-18-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds
Christoph Hellwig
Wolfram Sang
Andy-ld Lu
Shawn Lin
Ulf Hansson
Stefan Wahren
Victor Shih
Avri Altman
Catalin Popescu
Christian Marangi
Uwe Kleine-König
Keita Aihara
Guenter Roeck
Al Viro
Alexander Stein
Jens Wiklander
Riyan Dhiman
Chanwoo Lee
Jonathan Bell
Dan Carpenter
Greg Kroah-Hartman
Jeff Johnson