A few bugs were found in the fprobe accounting logic along with it using
the function graph infrastructure. Update the fprobe selftest to catch
those bugs in case they or something similar shows up in the future.
The test now checks the enabled_functions file which shows all the
functions attached to ftrace or fgraph. When enabling a fprobe, make sure
that its corresponding function is also added to that file. Also add two
more fprobes to enable to make sure that the fprobe logic works properly
with multiple probes.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250220202055.733001756@goodmis.org
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- Cleanup with guard() and free() helpers
There were several places in the code that had a lot of "goto out" in the
error paths to either unlock a lock or free some memory that was
allocated. But this is error prone. Convert the code over to use the
guard() and free() helpers that let the compiler unlock locks or free
memory when the function exits.
- Update the Rust tracepoint code to use the C code too
There was some duplication of the tracepoint code for Rust that did the
same logic as the C code. Add a helper that makes it possible for both
algorithms to use the same logic in one place.
- Add poll to trace event hist files
It is useful to know when an event is triggered, or even with some
filtering. Since hist files of events get updated when active and the
event is triggered, allow applications to poll the hist file and wake up
when an event is triggered. This will let the application know that the
event it is waiting for happened.
- Add :mod: command to enable events for current or future modules
The function tracer already has a way to enable functions to be traced in
modules by writing ":mod:<module>" into set_ftrace_filter. That will
enable either all the functions for the module if it is loaded, or if it
is not, it will cache that command, and when the module is loaded that
matches <module>, its functions will be enabled. This also allows init
functions to be traced. But currently events do not have that feature.
Add the command where if ':mod:<module>' is written into set_event, then
either all the modules events are enabled if it is loaded, or cache it so
that the module's events are enabled when it is loaded. This also works
from the kernel command line, where "trace_event=:mod:<module>", when the
module is loaded at boot up, its events will be enabled then.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ5EbMxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qkZsAP9Amgx9frSbR1pn1t0I3wVnQx7khgOu
s/b8Ro+vjTx1/QD/RN2AA7f+HK4F27w3Aqfrs0nKXAPtXWsJ9Epp8raG5w8=
=Pg+4
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Cleanup with guard() and free() helpers
There were several places in the code that had a lot of "goto out" in
the error paths to either unlock a lock or free some memory that was
allocated. But this is error prone. Convert the code over to use the
guard() and free() helpers that let the compiler unlock locks or free
memory when the function exits.
- Update the Rust tracepoint code to use the C code too
There was some duplication of the tracepoint code for Rust that did
the same logic as the C code. Add a helper that makes it possible for
both algorithms to use the same logic in one place.
- Add poll to trace event hist files
It is useful to know when an event is triggered, or even with some
filtering. Since hist files of events get updated when active and the
event is triggered, allow applications to poll the hist file and wake
up when an event is triggered. This will let the application know
that the event it is waiting for happened.
- Add :mod: command to enable events for current or future modules
The function tracer already has a way to enable functions to be
traced in modules by writing ":mod:<module>" into set_ftrace_filter.
That will enable either all the functions for the module if it is
loaded, or if it is not, it will cache that command, and when the
module is loaded that matches <module>, its functions will be
enabled. This also allows init functions to be traced. But currently
events do not have that feature.
Add the command where if ':mod:<module>' is written into set_event,
then either all the modules events are enabled if it is loaded, or
cache it so that the module's events are enabled when it is loaded.
This also works from the kernel command line, where
"trace_event=:mod:<module>", when the module is loaded at boot up,
its events will be enabled then.
* tag 'trace-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (26 commits)
tracing: Fix output of set_event for some cached module events
tracing: Fix allocation of printing set_event file content
tracing: Rename update_cache() to update_mod_cache()
tracing: Fix #if CONFIG_MODULES to #ifdef CONFIG_MODULES
selftests/ftrace: Add test that tests event :mod: commands
tracing: Cache ":mod:" events for modules not loaded yet
tracing: Add :mod: command to enabled module events
selftests/tracing: Add hist poll() support test
tracing/hist: Support POLLPRI event for poll on histogram
tracing/hist: Add poll(POLLIN) support on hist file
tracing: Fix using ret variable in tracing_set_tracer()
tracepoint: Reduce duplication of __DO_TRACE_CALL
tracing/string: Create and use __free(argv_free) in trace_dynevent.c
tracing: Switch trace_stat.c code over to use guard()
tracing: Switch trace_stack.c code over to use guard()
tracing: Switch trace_osnoise.c code over to use guard() and __free()
tracing: Switch trace_events_synth.c code over to use guard()
tracing: Switch trace_events_filter.c code over to use guard()
tracing: Switch trace_events_trigger.c code over to use guard()
tracing: Switch trace_events_hist.c code over to use guard()
...
- fixes, reporting improvements, and cleanup changes to several tests
- adds support for DT_GNU_HASH to selftests/vDSO
-----BEGIN PGP SIGNATURE-----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=XSsc
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-next-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
- fixes, reporting improvements, and cleanup changes to several tests
- add support for DT_GNU_HASH to selftests/vDSO
* tag 'linux_kselftest-next-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/rseq: Fix handling of glibc without rseq support
selftests/resctrl: Discover SNC kernel support and adjust messages
selftests/resctrl: Adjust effective L3 cache size with SNC enabled
selftests/ftrace: Make uprobe test more robust against binary name
selftests/ftrace: Fix to use remount when testing mount GID option
selftests: tmpfs: Add kselftest support to tmpfs
selftests: tmpfs: Add Test-skip if not run as root
selftests: harness: fix printing of mismatch values in __EXPECT()
selftests/ring-buffer: Add test for out-of-bound pgoff mapping
selftests/run_kselftest.sh: Fix help string for --per-test-log
selftests: acct: Add ksft_exit_skip if not running as root
selftests: kselftest: Fix the wrong format specifier
selftests: timers: clocksource-switch: Adapt progress to kselftest framework
selftests/zram: gitignore output file
selftests/filesystems: Add missing gitignore file
selftests: Warn about skipped tests in result summary
selftests: kselftest: Add ksft_test_result_xpass
selftests/vDSO: support DT_GNU_HASH
selftests/ipc: Remove unused variables
selftest: media_tests: fix trivial UAF typo
Now that here's a :mod: command that can be sent into set_event, add a
test that tests its use. Both setting events for a loaded module, as well
as caching what events to set for a module that is not loaded yet.
Cc: Shuah Khan <shuah@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kselftest@vger.kernel.org
Link: https://lore.kernel.org/20250116143533.819228058@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Make add_remove_uprobe test case more robust against various real
binary name.
Current add_remove_uprobe.tc test expects the real binary of /bin/sh
is '*/bin/*sh', but it does not work on busybox environment.
Instead of using fixed pattern, use readlink to identify real binary
name.
Link: https://lore.kernel.org/r/173625187633.1383744.2840679071525852811.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fix mount_options.tc to use remount option to mount the tracefs.
Since the current implementation does not umount the tracefs,
this test always fails because of -EBUSY error.
Using remount option will allow us to change the mount option.
Link: https://lore.kernel.org/r/173625186741.1383744.16707876180798573039.stgit@devnote2
Fixes: 8b55572e51 ("tracing/selftests: Add tracefs mount options test")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add a testcase for poll() on hist file. This introduces a helper binary
to the ftracetest, because there is no good way to reliably execute
poll() on hist file.
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/173547867935.569911.10127126796879854182.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
This test case repeats define and undefine the fprobe dynamic event to
ensure that the fprobe does not cause any issue with such operations.
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/173519009398.391279.4625924605120064761.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Since the fprobe event does not support maxactive anymore, stop
testing the maxactive syntax error checking.
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/173519008333.391279.10184048816208739987.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In 'NOFENTRY_ARGS' test case for syntax check, any offset X of
`vfs_read+X` except function entry offset (0) fits the criterion,
even if that offset is not at instruction boundary, as the parser
comes before probing. But with "ENDBR64" instruction on x86, offset
4 is treated as function entry. So, X can't be 4 as well. Thus, 8
was used as offset for the test case. On 64-bit powerpc though, any
offset <= 16 can be considered function entry depending on build
configuration (see arch_kprobe_on_func_entry() for implementation
details). So, use `vfs_read+20` to accommodate that scenario too.
Link: https://lore.kernel.org/r/20241129202621.721159-1-hbathini@linux.ibm.com
Fixes: 4231f30fcc ("selftests/ftrace: Add BTF arguments test cases")
Suggested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
- Merged tag ftrace-v6.12-rc4
There was a fix to locking in register_ftrace_graph() for shadow stacks
that was sent upstream. But this code was also being rewritten, and the
locking fix was needed. Merging this fix was required to continue the
work.
- Restructure the function graph shadow stack to prepare it for use with
kretprobes
With the goal of merging the shadow stack logic of function graph and
kretprobes, some more restructuring of the function shadow stack is
required.
Move out function graph specific fields from the fgraph infrastructure and
store it on the new stack variables that can pass data from the entry
callback to the exit callback.
Hopefully, with this change, the merge of kretprobes to use fgraph shadow
stacks will be ready by the next merge window.
- Make shadow stack 4k instead of using PAGE_SIZE.
Some architectures have very large PAGE_SIZE values which make its use for
shadow stacks waste a lot of memory.
- Give shadow stacks its own kmem cache.
When function graph is started, every task on the system gets a shadow
stack. In the future, shadow stacks may not be 4K in size. Have it have
its own kmem cache so that whatever size it becomes will still be
efficient in allocations.
- Initialize profiler graph ops as it will be needed for new updates to fgraph
- Convert to use guard(mutex) for several ftrace and fgraph functions
- Add more comments and documentation
- Show function return address in function graph tracer
Add an option to show the caller of a function at each entry of the
function graph tracer, similar to what the function tracer does.
- Abstract out ftrace_regs from being used directly like pt_regs
ftrace_regs was created to store a partial pt_regs. It holds only the
registers and stack information to get to the function arguments and
return values. On several archs, it is simply a wrapper around pt_regs.
But some users would access ftrace_regs directly to get the pt_regs which
will not work on all archs. Make ftrace_regs an abstract structure that
requires all access to its fields be through accessor functions.
- Show how long it takes to do function code modifications
When code modification for function hooks happen, it always had the time
recorded in how long it took to do the conversion. But this value was
never exported. Recently the code was touched due to new ROX modification
handling that caused a large slow down in doing the modifications and
had a significant impact on boot times.
Expose the timings in the dyn_ftrace_total_info file. This file was
created a while ago to show information about memory usage and such to
implement dynamic function tracing. It's also an appropriate file to store
the timings of this modification as well. This will make it easier to see
the impact of changes to code modification on boot up timings.
- Other clean ups and small fixes
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZztrUxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qnnNAQD6w4q9VQ7oOE2qKLqtnj87h4c1GqKn
SPkpEfC3n/ATEAD/fnYjT/eOSlHiGHuD/aTA+U/bETrT99bozGM/4mFKEgY=
=6nCa
-----END PGP SIGNATURE-----
Merge tag 'ftrace-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ftrace updates from Steven Rostedt:
- Restructure the function graph shadow stack to prepare it for use
with kretprobes
With the goal of merging the shadow stack logic of function graph and
kretprobes, some more restructuring of the function shadow stack is
required.
Move out function graph specific fields from the fgraph
infrastructure and store it on the new stack variables that can pass
data from the entry callback to the exit callback.
Hopefully, with this change, the merge of kretprobes to use fgraph
shadow stacks will be ready by the next merge window.
- Make shadow stack 4k instead of using PAGE_SIZE.
Some architectures have very large PAGE_SIZE values which make its
use for shadow stacks waste a lot of memory.
- Give shadow stacks its own kmem cache.
When function graph is started, every task on the system gets a
shadow stack. In the future, shadow stacks may not be 4K in size.
Have it have its own kmem cache so that whatever size it becomes will
still be efficient in allocations.
- Initialize profiler graph ops as it will be needed for new updates to
fgraph
- Convert to use guard(mutex) for several ftrace and fgraph functions
- Add more comments and documentation
- Show function return address in function graph tracer
Add an option to show the caller of a function at each entry of the
function graph tracer, similar to what the function tracer does.
- Abstract out ftrace_regs from being used directly like pt_regs
ftrace_regs was created to store a partial pt_regs. It holds only the
registers and stack information to get to the function arguments and
return values. On several archs, it is simply a wrapper around
pt_regs. But some users would access ftrace_regs directly to get the
pt_regs which will not work on all archs. Make ftrace_regs an
abstract structure that requires all access to its fields be through
accessor functions.
- Show how long it takes to do function code modifications
When code modification for function hooks happen, it always had the
time recorded in how long it took to do the conversion. But this
value was never exported. Recently the code was touched due to new
ROX modification handling that caused a large slow down in doing the
modifications and had a significant impact on boot times.
Expose the timings in the dyn_ftrace_total_info file. This file was
created a while ago to show information about memory usage and such
to implement dynamic function tracing. It's also an appropriate file
to store the timings of this modification as well. This will make it
easier to see the impact of changes to code modification on boot up
timings.
- Other clean ups and small fixes
* tag 'ftrace-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (22 commits)
ftrace: Show timings of how long nop patching took
ftrace: Use guard to take ftrace_lock in ftrace_graph_set_hash()
ftrace: Use guard to take the ftrace_lock in release_probe()
ftrace: Use guard to lock ftrace_lock in cache_mod()
ftrace: Use guard for match_records()
fgraph: Use guard(mutex)(&ftrace_lock) for unregister_ftrace_graph()
fgraph: Give ret_stack its own kmem cache
fgraph: Separate size of ret_stack from PAGE_SIZE
ftrace: Rename ftrace_regs_return_value to ftrace_regs_get_return_value
selftests/ftrace: Fix check of return value in fgraph-retval.tc test
ftrace: Use arch_ftrace_regs() for ftrace_regs_*() macros
ftrace: Consolidate ftrace_regs accessor functions for archs using pt_regs
ftrace: Make ftrace_regs abstract from direct use
fgragh: No need to invoke the function call_filter_check_discard()
fgraph: Simplify return address printing in function graph tracer
function_graph: Remove unnecessary initialization in ftrace_graph_ret_addr()
function_graph: Support recording and printing the function return address
ftrace: Have calltime be saved in the fgraph storage
ftrace: Use a running sleeptime instead of saving on shadow stack
fgraph: Use fgraph data to store subtime for profiler
...
Add a selftest to check that the tracefs gid mount option is applied
correctly.
./ftracetest test.d/00basic/mount_options.tc
Use the new readme string "[gid=<gid>] as a requirement and also update
test_ownership.tc requirements to use this.
Cc: Eric Sandeen <sandeen@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Ali Zahraee <ahzahraee@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/20241030171928.4168869-4-kaleshsingh@google.com
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The addition of recording both the function name and return address to the
function graph tracer updated the selftest to check for "=-5" from "= -5".
But this causes the test to fail on certain configs, as "= -5" is still a
value that can be returned if function addresses are not enabled (older kernels).
Check for both "=-5" and " -5" as a success value.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Donglin Peng <pengdonglin@xiaomi.com>
Link: https://lore.kernel.org/20241011132042.435f43cc@gandalf.local.home
Fixes: 21e92806d3 ("function_graph: Support recording and printing the function return address")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Masami reported a bug when running function graph tracing then the
function profiler. The following commands would cause a kernel crash:
# cd /sys/kernel/tracing/
# echo function_graph > current_tracer
# echo 1 > function_profile_enabled
In that order. Create a test to test this two to make sure this does not
come back as a regression.
Link: https://lore.kernel.org/172398528350.293426.8347220120333730248.stgit@devnote2
Link: https://lore.kernel.org/all/20241010165235.35122877@gandalf.local.home/
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When using function_graph tracer to analyze the flow of kernel function
execution, it is often necessary to quickly locate the exact line of code
where the call occurs. While this may be easy at times, it can be more
time-consuming when some functions are inlined or the flow is too long.
This feature aims to simplify the process by recording the return address
of traced funcions and printing it when outputing trace logs.
To enhance human readability, the prefix 'ret=' is used for the kernel return
value, while '<-' serves as the prefix for the return address in trace logs to
make it look more like the function tracer.
A new trace option named 'funcgraph-retaddr' has been introduced, and the
existing option 'sym-addr' can be used to control the format of the return
address.
See below logs with both funcgraph-retval and funcgraph-retaddr enabled.
0) | load_elf_binary() { /* <-bprm_execve+0x249/0x600 */
0) | load_elf_phdrs() { /* <-load_elf_binary+0x84/0x1730 */
0) | __kmalloc_noprof() { /* <-load_elf_phdrs+0x4a/0xb0 */
0) 3.657 us | __cond_resched(); /* <-__kmalloc_noprof+0x28c/0x390 ret=0x0 */
0) + 24.335 us | } /* __kmalloc_noprof ret=0xffff8882007f3000 */
0) | kernel_read() { /* <-load_elf_phdrs+0x6c/0xb0 */
0) | rw_verify_area() { /* <-kernel_read+0x2b/0x50 */
0) | security_file_permission() { /* <-kernel_read+0x2b/0x50 */
0) | selinux_file_permission() { /* <-security_file_permission+0x26/0x40 */
0) | __inode_security_revalidate() { /* <-selinux_file_permission+0x6d/0x140 */
0) 2.034 us | __cond_resched(); /* <-__inode_security_revalidate+0x5f/0x80 ret=0x0 */
0) 6.602 us | } /* __inode_security_revalidate ret=0x0 */
0) 2.214 us | avc_policy_seqno(); /* <-selinux_file_permission+0x107/0x140 ret=0x0 */
0) + 16.670 us | } /* selinux_file_permission ret=0x0 */
0) + 20.809 us | } /* security_file_permission ret=0x0 */
0) + 25.217 us | } /* rw_verify_area ret=0x0 */
0) | __kernel_read() { /* <-load_elf_phdrs+0x6c/0xb0 */
0) | ext4_file_read_iter() { /* <-__kernel_read+0x160/0x2e0 */
Then, we can use the faddr2line to locate the source code, for example:
$ ./scripts/faddr2line ./vmlinux load_elf_phdrs+0x6c/0xb0
load_elf_phdrs+0x6c/0xb0:
elf_read at fs/binfmt_elf.c:471
(inlined by) load_elf_phdrs at fs/binfmt_elf.c:531
Link: https://lore.kernel.org/20240915032912.1118397-1-dolinux.peng@gmail.com
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409150605.HgUmU8ea-lkp@intel.com/
Signed-off-by: Donglin Peng <dolinux.peng@gmail.com>
[ Rebased to handle text_delta offsets ]
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- uprobes: make trace_uprobe->nhit counter a per-CPU one
This makes uprobe event's hit counter per-CPU for improving
scalability on multi-core environment.
- kprobes: Remove obsoleted declaration for init_test_probes
Remove unused init_test_probes() from header.
- Raw tracepoint probe supports raw tracepoint events on modules.
The tracepoint events using fprobe were introduced in v6.5, but
tracepoints can be compiled in modules. This supports such a case.
This includes the following improvements.
. tracepoint: add a function for iterating over all tracepoints in
all modules.
. tracepoint: Add a function for iterating over tracepoints in a
module.
. tracing/fprobe: Support raw tracepoint events on modules.
. tracing/fprobe: Support raw tracepoints on future loaded modules.
This allows user to add tracepoint events on modules which is
not loaded yet.
. selftests/tracing: Add a test for tracepoint events on modules.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmb0HXgACgkQ2/sHvwUr
Pxs7AAf+K89Q7eyqKLP/oG5LGsnmWwhZHP26HTbGKh7mRaxGE+cf3l1O2lCMAgBt
0Y1J0sHkgRSnubmlPrgEMKKLOKVBwnvwBqbqO8Zw8L3GxMegG5YYsl3Y60Q0T6Gq
xiL17sHILbb/yefUqnf6C3QHoSjR4aTMEaQSpux1tsCqG/sLeU7V6DZrWdM5t4Fl
CvQDuy//UdQUKFTUC5XOc6lRbKr94ktp/VTxdHZLXa5u6p/slq8ISf9EA+Rrsjkp
m+FtW8MpfcYt3K+hs0kV58F43XWeRt9F7OlLf+MlyCeRRQor4xvkVlV0iw6VcRG9
sXt6ml6AmyA2JWRzR5qSKYvMAsNVyA==
=GYlS
-----END PGP SIGNATURE-----
Merge tag 'probes-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
- uprobes: make trace_uprobe->nhit counter a per-CPU one
This makes uprobe event's hit counter per-CPU for improving
scalability on multi-core environment
- kprobes: Remove obsoleted declaration for init_test_probes
Remove unused init_test_probes() from header
- Raw tracepoint probe supports raw tracepoint events on modules:
- add a function for iterating over all tracepoints in all modules
- add a function for iterating over tracepoints in a module
- support raw tracepoint events on modules
- support raw tracepoints on future loaded modules
- add a test for tracepoint events on modules"
* tag 'probes-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
sefltests/tracing: Add a test for tracepoint events on modules
tracing/fprobe: Support raw tracepoints on future loaded modules
tracing/fprobe: Support raw tracepoint events on modules
tracepoint: Support iterating tracepoints in a loading module
tracepoint: Support iterating over tracepoints on modules
kprobes: Remove obsoleted declaration for init_test_probes
uprobes: turn trace_uprobe's nhit counter to be per-CPU one
Support raw tracepoint events on future loaded (unloaded) modules.
This allows user to create raw tracepoint events which can be used from
module's __init functions.
Note: since the kernel does not have any information about the tracepoints
in the unloaded modules, fprobe events can not check whether the tracepoint
exists nor extend the BTF based arguments.
Link: https://lore.kernel.org/all/172397780593.286558.18360375226968537828.stgit@devnote2/
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Fix eventfs ownership testcase to find mount point if stat -c "%m" failed.
This can happen on the system based on busybox. In this case, this will
try to use the current working directory, which should be a tracefs top
directory (and eventfs is mounted as a part of tracefs.)
If it does not work, the test is skipped as UNRESOLVED because of
the environmental problem.
Fixes: ee9793be08 ("tracing/selftests: Add ownership modification tests for eventfs")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The function "scheduler_tick" was renamed to "sched_tick" and a selftest
that used that function for testing function trace filtering used that
function as part of the test.
But the change causes it to fail when run on older kernels. As tests
should not fail on older kernels, add a check to see which name is
available before testing.
Fixes: 86dd6c04ef ("sched/balancing: Rename scheduler_tick() => sched_tick()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
kprobe_args_{char,string}.tc are using available_filter_functions file
which is provided by function tracer. Thus if function tracer is disabled,
these tests are failed on recent kernels because tracefs_create_dir is
not raised events by adding a dynamic event.
Add available_filter_functions to requires line.
Fixes: 7c1130ea5c ("test: ftrace: Fix kprobe test for eventfs")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
A regression happened where running the ownership test passes on the first
iteration but fails running it a second time. This was caught and fixed,
but a later change brought it back. The regression was missed because the
automated tests only run the tests once per boot.
Change the ownership test to iterate through the tests twice, as this will
catch the regression with a single run.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Up until now, the function graph tracer could only have a single user
attached to it. If another user tried to attach to the function graph
tracer while one was already attached, it would fail. Allowing function
graph tracer to have more than one user has been asked for since 2009, but
it required a rewrite to the logic to pull it off so it never happened.
Until now!
There's three systems that trace the return of a function. That is
kretprobes, function graph tracer, and BPF. kretprobes and function graph
tracing both do it similarly. The difference is that kretprobes uses a
shadow stack per callback and function graph tracer creates a shadow stack
for all tasks. The function graph tracer method makes it possible to trace
the return of all functions. As kretprobes now needs that feature too,
allowing it to use function graph tracer was needed. BPF also wants to
trace the return of many probes and its method doesn't scale either.
Having it use function graph tracer would improve that.
By allowing function graph tracer to have multiple users allows both
kretprobes and BPF to use function graph tracer in these cases. This will
allow kretprobes code to be removed in the future as it's version will no
longer be needed. Note, function graph tracer is only limited to 16
simultaneous users, due to shadow stack size and allocated slots.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZpbWlxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qgtvAP9jxmgEiEhz4Bpe1vRKVSMYK6ozXHTT
7MFKRMeQqQ8zeAEA2sD5Zrt9l7zKzg0DFpaDLgc3/yh14afIDxzTlIvkmQ8=
=umuf
-----END PGP SIGNATURE-----
Merge tag 'ftrace-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ftrace updates from Steven Rostedt:
"Rewrite of function graph tracer to allow multiple users
Up until now, the function graph tracer could only have a single user
attached to it. If another user tried to attach to the function graph
tracer while one was already attached, it would fail. Allowing
function graph tracer to have more than one user has been asked for
since 2009, but it required a rewrite to the logic to pull it off so
it never happened. Until now!
There's three systems that trace the return of a function. That is
kretprobes, function graph tracer, and BPF. kretprobes and function
graph tracing both do it similarly. The difference is that kretprobes
uses a shadow stack per callback and function graph tracer creates a
shadow stack for all tasks. The function graph tracer method makes it
possible to trace the return of all functions. As kretprobes now needs
that feature too, allowing it to use function graph tracer was needed.
BPF also wants to trace the return of many probes and its method
doesn't scale either. Having it use function graph tracer would
improve that.
By allowing function graph tracer to have multiple users allows both
kretprobes and BPF to use function graph tracer in these cases. This
will allow kretprobes code to be removed in the future as it's version
will no longer be needed.
Note, function graph tracer is only limited to 16 simultaneous users,
due to shadow stack size and allocated slots"
* tag 'ftrace-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (49 commits)
fgraph: Use str_plural() in test_graph_storage_single()
function_graph: Add READ_ONCE() when accessing fgraph_array[]
ftrace: Add missing kerneldoc parameters to unregister_ftrace_direct()
function_graph: Everyone uses HAVE_FUNCTION_GRAPH_RET_ADDR_PTR, remove it
function_graph: Fix up ftrace_graph_ret_addr()
function_graph: Make fgraph_update_pid_func() a stub for !DYNAMIC_FTRACE
function_graph: Rename BYTE_NUMBER to CHAR_NUMBER in selftests
fgraph: Remove some unused functions
ftrace: Hide one more entry in stack trace when ftrace_pid is enabled
function_graph: Do not update pid func if CONFIG_DYNAMIC_FTRACE not enabled
function_graph: Make fgraph_do_direct static key static
ftrace: Fix prototypes for ftrace_startup/shutdown_subops()
ftrace: Assign RCU list variable with rcu_assign_ptr()
ftrace: Assign ftrace_list_end to ftrace_ops_list type cast to RCU
ftrace: Declare function_trace_op in header to quiet sparse warning
ftrace: Add comments to ftrace_hash_move() and friends
ftrace: Convert "inc" parameter to bool in ftrace_hash_rec_update_modify()
ftrace: Add comments to ftrace_hash_rec_disable/enable()
ftrace: Remove "filter_hash" parameter from __ftrace_hash_rec_update()
ftrace: Rename dup_hash() and comment it
...
The pid filtering test will set the pid filters and make sure that both
function and function_graph tracing honors the filters. But the
function_graph tracer test was failing because the PID was not being
filtered properly. That's because the funcgraph-proc option wasn't getting
set. Without that option the PID is not shown.
Instead we get:
+ cat trace
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
3) ! 143.685 us | kernel_clone();
3) ! 127.055 us | kernel_clone();
1) ! 127.170 us | kernel_clone();
3) ! 126.840 us | kernel_clone();
When we should be getting:
+ cat trace
# tracer: function_graph
#
# CPU TASK/PID DURATION FUNCTION CALLS
# | | | | | | | | |
4) bash-939 | # 1070.009 us | kernel_clone();
4) bash-939 | # 1116.903 us | kernel_clone();
5) bash-939 | ! 976.133 us | kernel_clone();
5) bash-939 | ! 954.012 us | kernel_clone();
The test looks for the pids it is filtering and will fail if it can not
find them. Without fungraph-proc option set, it will not be displayed and
the test will fail.
Link: https://lore.kernel.org/all/Zl9JFnzKGuUM10X2@J2N7QTR9R3/
Link: https://lore.kernel.org/linux-trace-kernel/20240604152550.0c01d7cd@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 35b944a997 ("selftests/ftrace: Add function_graph tracer to func-filter-pid test")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Add a test that creates 3 instances and enables function_graph tracer in
each as well as the top instance, where each will enable a filter (but one
that traces all functions) and check that they are filtering properly.
Link: https://lore.kernel.org/linux-trace-kernel/20240603190825.252845939@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The function tracer is tested to see if pid filtering works. Add a test to
test function_graph tracer as well, but only if the function_graph tracer
is enabled for the top level or instance.
Link: https://lore.kernel.org/linux-trace-kernel/20240603190825.083048115@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guo Ren <guoren@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Commit eb50d0f250 ("selftests/ftrace: Choose target function for filter
test from samples") choose the target function from samples, but sometimes
this test failes randomly because the target function does not hit at the
next time. So retry getting samples up to 10 times.
Fixes: eb50d0f250 ("selftests/ftrace: Choose target function for filter test from samples")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The kprobe_eventname.tc test checks if a function with .isra. can have a
kprobe attached to it. It loops through the kallsyms file for all the
functions that have the .isra. name, and checks if it exists in the
available_filter_functions file, and if it does, it uses it to attach a
kprobe to it.
The issue is that kprobes can not attach to functions that are listed more
than once in available_filter_functions. With the latest kernel, the
function that is found is: rapl_event_update.isra.0
# grep rapl_event_update.isra.0 /sys/kernel/tracing/available_filter_functions
rapl_event_update.isra.0
rapl_event_update.isra.0
It is listed twice. This causes the attached kprobe to it to fail which in
turn fails the test. Instead of just picking the function function that is
found in available_filter_functions, pick the first one that is listed
only once in available_filter_functions.
Cc: stable@vger.kernel.org
Fixes: 604e354823 ("selftests/ftrace: Select an existing function in kprobe_eventname test")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Update required config options for running all tests.
This also sorts the config entries alphabetically.
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The dynevent/test_duplicates.tc test case uses `syscalls/sys_enter_openat`
event for defining eprobe on it. Since this `syscalls` events depend on
CONFIG_FTRACE_SYSCALLS=y, if it is not set, the test will fail.
Add the event file to `required` line so that the test will return
`unsupported` result.
Fixes: 297e1dcdca ("selftests/ftrace: Add selftest for testing duplicate eprobes and kprobes")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
- tracing/probes: Adding new pseudo-types %pd and %pD support for dumping
dentry name from 'struct dentry *' and file name from 'struct file *'.
- uprobes: Some performance optimizations have been done.
. Speed up the BPF uprobe event by delaying the fetching of the uprobe
event arguments that are not used in BPF.
. Avoid locking by speculatively checking whether uprobe event is valid.
. Reduce lock contention by using read/write_lock instead of spinlock for
uprobe list operation. This improved BPF uprobe benchmark result 43% on
average.
- rethook: Removes non-fatal warning messages when tracing stack from BPF
and skip rcu_is_watching() validation in rethook if possible.
- objpool: Optimizing objpool (which is used by kretprobes and fprobe as
rethook backend storage) by inlining functions and avoid caching nr_cpu_ids
because it is a const value.
- fprobe: Add entry/exit callbacks types (code cleanup)
- kprobes: Check ftrace was killed in kprobes if it uses ftrace.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmZFUxsbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8b+fIH/A96/SeC5WRLhXmHfTCM
IvKUea2n0b0oV/2pVfHqfkCBTICuUZ97Opd9VH9jLtjBOTh0fUOGZ2DNVGdSYfWm
IIkS5dhuZxHXrSHEVYykwLHI3AOL7Q6Ny9EmOg1CNMidUkPMNtBvppsBYPlFU/B/
qQJAvOdkVOnNITCaas0+MNgepoVVKdJzdNQ1I4WrGyG8isCZBaCYKo2QcGyheCNN
y8NXvnVHgmgHQ8nTaeE5AawclFzFnhwHfPQPe1kiyGrx15b8K+VYmaZxPKv33A1a
KT3TKJ1Ep7s7iWFh2iPVJzIwOXCmSnvNTKfNx/MDuKtO7UVfFwytoMEaekbmv3bG
VqM=
=n/mW
-----END PGP SIGNATURE-----
Merge tag 'probes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
- tracing/probes: Add new pseudo-types %pd and %pD support for dumping
dentry name from 'struct dentry *' and file name from 'struct file *'
- uprobes performance optimizations:
- Speed up the BPF uprobe event by delaying the fetching of the
uprobe event arguments that are not used in BPF
- Avoid locking by speculatively checking whether uprobe event is
valid
- Reduce lock contention by using read/write_lock instead of
spinlock for uprobe list operation. This improved BPF uprobe
benchmark result 43% on average
- rethook: Remove non-fatal warning messages when tracing stack from
BPF and skip rcu_is_watching() validation in rethook if possible
- objpool: Optimize objpool (which is used by kretprobes and fprobe as
rethook backend storage) by inlining functions and avoid caching
nr_cpu_ids because it is a const value
- fprobe: Add entry/exit callbacks types (code cleanup)
- kprobes: Check ftrace was killed in kprobes if it uses ftrace
* tag 'probes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
kprobe/ftrace: bail out if ftrace was killed
selftests/ftrace: Fix required features for VFS type test case
objpool: cache nr_possible_cpus() and avoid caching nr_cpu_ids
objpool: enable inlining objpool_push() and objpool_pop() operations
rethook: honor CONFIG_FTRACE_VALIDATE_RCU_IS_WATCHING in rethook_try_get()
ftrace: make extra rcu_is_watching() validation check optional
uprobes: reduce contention on uprobes_tree access
rethook: Remove warning messages printed for finding return address of a frame.
fprobe: Add entry/exit callbacks types
selftests/ftrace: add fprobe test cases for VFS type "%pd" and "%pD"
selftests/ftrace: add kprobe test cases for VFS type "%pd" and "%pD"
Documentation: tracing: add new type '%pd' and '%pD' for kprobe
tracing/probes: support '%pD' type for print struct file's name
tracing/probes: support '%pd' type for print struct dentry's name
uprobes: add speculative lockless system-wide uprobe filter check
uprobes: prepare uprobe args buffer lazily
uprobes: encapsulate preparation of uprobe args buffer
This kselftest update for Linux 6.10-rc1 consists of:
- changes to make framework and tests reporting KTAP compliant
- changes to make ktap_helpers and power_supply test POSIX compliant
- adds ksft_exit_fail_perror() to include errono in string form
- fixes to avoid clang reporting false positive static analysis errors
about functions that exit and never return. ksft_exit* functions
are marked __noreturn to address this problem
- adds mechanism for reporting a KSFT_ result code
- fixes to build warnings related missing headers and unused variables
- fixes to clang build failures
- cleanups to resctrl test
- adds host arch for LLVM builds
-----BEGIN PGP SIGNATURE-----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=XIu6
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-next-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
- make framework and tests reporting KTAP compliant
- make ktap_helpers and power_supply test POSIX compliant
- add ksft_exit_fail_perror() to include errono in string form
- avoid clang reporting false positive static analysis errors about
functions that exit and never return. ksft_exit* functions are marked
__noreturn to address this problem
- add mechanism for reporting a KSFT_ result code
- fix build warnings related missing headers and unused variables
- fix clang build failures
- cleanups to resctrl test
- add host arch for LLVM builds
* tag 'linux_kselftest-next-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (44 commits)
selftests/sgx: Include KHDR_INCLUDES in Makefile
selftests: Compile kselftest headers with -D_GNU_SOURCE
selftests/resctrl: fix clang build warnings related to abs(), labs() calls
selftests/ftrace: Fix checkbashisms errors
selftests/ftrace: Fix BTFARG testcase to check fprobe is enabled correctly
selftests/capabilities: fix warn_unused_result build warnings
selftests: filesystems: add missing stddef header
selftests: kselftest_deps: fix l5_test() empty variable
selftests: default to host arch for LLVM builds
selftests/resctrl: fix clang build failure: use LOCAL_HDRS
selftests/binderfs: use the Makefile's rules, not Make's implicit rules
Documentation: kselftest: fix codeblock
selftests: kselftest: Make ksft_exit functions return void instead of int
selftests: x86: ksft_exit_pass() does not return
selftests: timers: ksft_exit functions do not return
selftests: sync: ksft_exit_pass() does not return
selftests/resctrl: ksft_exit_skip() does not return
selftests: pidfd: ksft_exit functions do not return
selftests/mm: ksft_exit functions do not return
selftests: membarrier: ksft_exit_pass() does not return
...
- Add cpufreq pressure feedback for the scheduler
- Rework misfit load-balancing wrt. affinity restrictions
- Clean up and simplify the code around ::overutilized and
::overload access.
- Simplify sched_balance_newidle()
- Bump SCHEDSTAT_VERSION to 16 due to a cleanup of CPU_MAX_IDLE_TYPES
handling that changed the output.
- Rework & clean up <asm/vtime.h> interactions wrt. arch_vtime_task_switch()
- Reorganize, clean up and unify most of the higher level
scheduler balancing function names around the sched_balance_*()
prefix.
- Simplify the balancing flag code (sched_balance_running)
- Miscellaneous cleanups & fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=obph
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Add cpufreq pressure feedback for the scheduler
- Rework misfit load-balancing wrt affinity restrictions
- Clean up and simplify the code around ::overutilized and
::overload access.
- Simplify sched_balance_newidle()
- Bump SCHEDSTAT_VERSION to 16 due to a cleanup of CPU_MAX_IDLE_TYPES
handling that changed the output.
- Rework & clean up <asm/vtime.h> interactions wrt arch_vtime_task_switch()
- Reorganize, clean up and unify most of the higher level
scheduler balancing function names around the sched_balance_*()
prefix
- Simplify the balancing flag code (sched_balance_running)
- Miscellaneous cleanups & fixes
* tag 'sched-core-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
sched/pelt: Remove shift of thermal clock
sched/cpufreq: Rename arch_update_thermal_pressure() => arch_update_hw_pressure()
thermal/cpufreq: Remove arch_update_thermal_pressure()
sched/cpufreq: Take cpufreq feedback into account
cpufreq: Add a cpufreq pressure feedback for the scheduler
sched/fair: Fix update of rd->sg_overutilized
sched/vtime: Do not include <asm/vtime.h> header
s390/irq,nmi: Include <asm/vtime.h> header directly
s390/vtime: Remove unused __ARCH_HAS_VTIME_TASK_SWITCH leftover
sched/vtime: Get rid of generic vtime_task_switch() implementation
sched/vtime: Remove confusing arch_vtime_task_switch() declaration
sched/balancing: Simplify the sg_status bitmask and use separate ->overloaded and ->overutilized flags
sched/fair: Rename set_rd_overutilized_status() to set_rd_overutilized()
sched/fair: Rename SG_OVERLOAD to SG_OVERLOADED
sched/fair: Rename {set|get}_rd_overload() to {set|get}_rd_overloaded()
sched/fair: Rename root_domain::overload to ::overloaded
sched/fair: Use helper functions to access root_domain::overload
sched/fair: Check root_domain::overload value before update
sched/fair: Combine EAS check with root_domain::overutilized access
sched/fair: Simplify the continue_balancing logic in sched_balance_newidle()
...
Since the VFS type argument test case uses fprobe events, it must
check the availablity of dynamic_events file and fprobe events syntax
in README. Without this fix, the test fails if CONFIG_FPROBE_EVENTS=n.
Link: https://lore.kernel.org/all/171478301645.110267.464634740467398506.stgit@devnote2/
Fixes: ee97e5e135 ("selftests/ftrace: add fprobe test cases for VFS type "%pd" and "%pD"")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Fix the below checkbashisms errors. Because of these errors, these tests
will fail on dash shell.
possible bashism in test.d/kprobe/kretprobe_entry_arg.tc line 14 ('function' is useless):
function streq() {
possible bashism in test.d/dynevent/fprobe_entry_arg.tc line 14 ('function' is useless):
function streq() {
Fixes: f6e2253a61 ("selftests/ftrace: Add test cases for entry args at function exit")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Since the dynevent/add_remove_btfarg.tc test case forgets to ensure that
fprobe is enabled for some structure field access tests which uses the
fprobe, it fails if CONFIG_FPROBE=n or CONFIG_FPROBE_EVENTS=n.
Fixes it to ensure the fprobe events are supported.
Fixes: d892d3d3d8 ("selftests/ftrace: Add BTF fields access testcases")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In order to facilitate debugging of issues from automated runs of the ftrace
selftests turn on verbose logging by default when run from the kselftest
runner. This is primarily used by automated systems where developers may
not have direct access to the system so defaulting to providing diagnostic
information which might help debug problems seems like a good idea.
When tests pass no extra output is generated, when they fail a full log of
the test run is provided. Since this really is rather verbose when there are
a large number of test failures or output is slow (eg, with a serial
console) this could substantially increase the run time for the tests which
might present problems with timeout detection for affected systems,
hopefully we keep the tests running well enough that this is not too much
of an issue.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When -v is specified ftracetest will dump logs of test execution to the
console which if -K is also specified for KTAP output will result in
output that is not properly KTAP formatted. All that's required for KTAP
formatting is that anything we log have a '#' at the start of the line so
we can improve things by washing the output through a simple read loop.
This will help automated parsers when verbose mode is enabled.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This patch adds fprobe test cases for new print format type "%pd/%pD".The
test cases test the following items:
1. Test "%pd" type for dput();
2. Test "%pD" type for vfs_read();
This test case require enable CONFIG_HAVE_FUNCTION_ARG_ACCESS_API configuration.
Link: https://lore.kernel.org/all/20240322064308.284457-6-yebin10@huawei.com/
Signed-off-by: Ye Bin <yebin10@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
This patch adds test cases for new print format type "%pd/%pD".The test cases
test the following items:
1. Test README if add "%pd/%pD" type;
2. Test "%pd" type for dput();
3. Test "%pD" type for vfs_read();
This test case require enable CONFIG_HAVE_FUNCTION_ARG_ACCESS_API configuration.
Link: https://lore.kernel.org/all/20240322064308.284457-5-yebin10@huawei.com/
Signed-off-by: Ye Bin <yebin10@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
While sched* events being traced and sched* events continuously happen,
"[xx] event tracing - enable/disable with subsystem level files" would
not stop as on some slower systems it seems to take forever.
Select the first 100 lines of output would be enough to judge whether
there are more than 3 types of sched events.
Fixes: 815b18ea66 ("ftracetest: Add basic event tracing test cases")
Cc: stable@vger.kernel.org
Signed-off-by: Yuanhe Shu <xiangzao@linux.alibaba.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The event filter function test has been failing in our internal test
farm:
| # not ok 33 event filter function - test event filtering on functions
Running the test in verbose mode indicates that this is because the test
erroneously determines that kmem_cache_free() is the most common caller
of kmem_cache_free():
# # + cut -d: -f3 trace
# # + sed s/call_site=([^+]*)+0x.*/1/
# # + sort
# # + uniq -c
# # + sort
# # + tail -n 1
# # + sed s/^[ 0-9]*//
# # + target_func=kmem_cache_free
... and as kmem_cache_free() doesn't call itself, setting this as the
filter function for kmem_cache_free() results in no hits, and
consequently the test fails:
# # + grep kmem_cache_free trace
# # + grep kmem_cache_free
# # + wc -l
# # + hitcnt=0
# # + grep kmem_cache_free trace
# # + grep -v kmem_cache_free
# # + wc -l
# # + misscnt=0
# # + [ 0 -eq 0 ]
# # + exit_fail
This seems to be because the system in question has tasks with ':' in
their name (which a number of kernel worker threads have). These show up
in the trace, e.g.
test:.sh-1299 [004] ..... 2886.040608: kmem_cache_free: call_site=putname+0xa4/0xc8 ptr=000000000f4d22f4 name=names_cache
... and so when we try to extact the call_site with:
cut -d: -f3 trace | sed 's/call_site=\([^+]*\)+0x.*/\1/'
... the 'cut' command will extrace the column containing
'kmem_cache_free' rather than the column containing 'call_site=...', and
the 'sed' command will leave this unchanged. Consequently, the test will
decide to use 'kmem_cache_free' as the filter function, resulting in the
failure seen above.
Fix this by matching the 'call_site=<func>' part specifically to extract
the function name.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Cc: linux-trace-kernel@vger.kernel.org
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmYAlq0eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGYqwH/0fb4pRbVtULpiIK
Cs7/e/IWzRRWLBq+Jj2KVVTxwjyiKFNOq6K/CHHnljIWo1yN2CIWeOgbHfTI0WfN
xmBdJP7OtK8MCN9PwwoWhZxMLcyv4pFCERrrkGa7AD+cdN4j/ytQ3mH5V8f/21fd
rnpQSdpgGXB2SSMHd520Y+e56+gxrrTmsDXjZWM08Wt0bbqAWJrjNe58BMz5hI1t
yQtcgYRTdUuZBn5TMkT99lK9EFQslV38YCo7RUP5D0DWXS1jSfWlgnCD1Nc1ziF4
ps/xPdUMDJAc5Tslg/hgJOciSuLqgMzIUsVgZrKysuu3NhwDY1LDWGORmH1t8E8W
RC25950=
=F+01
-----END PGP SIGNATURE-----
Merge tag 'v6.9-rc1' into sched/core, to pick up fixes and to refresh the branch
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- x96/kprobes: Use boolean for some function return instead of 0 and 1.
- x86/kprobes: Prohibit probing on INT/UD. This prevents user to put kprobe on
INTn/INT1/INT3/INTO and UD0/UD1/UD2 because these are used for a special
purpose in the kernel.
- x86/kprobes: Boost Grp instructions. Because a few percent of kernel
instructions are Grp 2/3/4/5 and those are safe to be executed without
ip register fixup, allow those to be boosted (direct execution on the
trampoline buffer with a JMP).
- tracing/probes: Add function argument access from return events (kretprobe
and fprobe). This allows user to compare how a data structure field is
changed after executing a function. With BTF, return event also accepts
function argument access by name. This also includes below patches;
. Fix a wrong comment (using "Kretprobe" in fprobe)
. Cleanup a big probe argument parser function into three parts, type
parser, post-processing function, and main parser.
. Cleanup to set nr_args field when initializing trace_probe instead of
counting up it while parsing.
. Cleanup a redundant #else block from tracefs/README source code.
. Update selftests to check entry argument access from return probes.
. Documentation update about entry argument access from return probes.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmXwW4kbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bH80H/3H6JENlDAjaSLi4vYrP
Qyw/cOGIuGu8cDEzkkOaFMol3TY23M7tQZH1lFefvV92gebZ0ttXnrQhSsKeO5XT
PCZ6Eoift5rwJCY967W4V6O0DrAkOGHlPtlKs47APJnTXwn8RcFTqWlQmhWg1AfD
g/FCWV7cs3eewZgV9iQcLydOoLLgRMr3G3rtPYQbCXhPzze0WTu4dSOXxCTjFe04
riHQy7R+ut6Cur8njpoqZl6bCMkQqAylByXf6wK96HjcS0+ZI7Ivi8Ey3l2aAFen
EeIViMU2Bl02XzBszj7Xq2cT/ebYAgDonFW3/5ZKD1YMO6F7wPoVH5OHrQ518Xuw
hQ8=
=O6l5
-----END PGP SIGNATURE-----
Merge tag 'probes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
"x86 kprobes:
- Use boolean for some function return instead of 0 and 1
- Prohibit probing on INT/UD. This prevents user to put kprobe on
INTn/INT1/INT3/INTO and UD0/UD1/UD2 because these are used for a
special purpose in the kernel
- Boost Grp instructions. Because a few percent of kernel
instructions are Grp 2/3/4/5 and those are safe to be executed
without ip register fixup, allow those to be boosted (direct
execution on the trampoline buffer with a JMP)
tracing:
- Add function argument access from return events (kretprobe and
fprobe). This allows user to compare how a data structure field is
changed after executing a function. With BTF, return event also
accepts function argument access by name.
- Fix a wrong comment (using "Kretprobe" in fprobe)
- Cleanup a big probe argument parser function into three parts, type
parser, post-processing function, and main parser
- Cleanup to set nr_args field when initializing trace_probe instead
of counting up it while parsing
- Cleanup a redundant #else block from tracefs/README source code
- Update selftests to check entry argument access from return probes
- Documentation update about entry argument access from return
probes"
* tag 'probes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
Documentation: tracing: Add entry argument access at function exit
selftests/ftrace: Add test cases for entry args at function exit
tracing/probes: Support $argN in return probe (kprobe and fprobe)
tracing: Remove redundant #else block for BTF args from README
tracing/probes: cleanup: Set trace_probe::nr_args at trace_probe_init
tracing/probes: Cleanup probe argument parser
tracing/fprobe-event: cleanup: Fix a wrong comment in fprobe event
x86/kprobes: Boost more instructions from grp2/3/4/5
x86/kprobes: Prohibit kprobing on INT and UD
x86/kprobes: Refactor can_{probe,boost} return type to bool
- Standardize on prefixing scheduler-internal functions defined
in <linux/sched.h> with sched_*() prefix. scheduler_tick() was
the only function using the scheduler_ prefix. Harmonize it.
- The other reason to rename it is the NOHZ scheduler tick
handling functions are already named sched_tick_*().
Make the 'git grep sched_tick' more meaningful.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Link: https://lore.kernel.org/r/20240308111819.1101550-3-mingo@kernel.org
Support accessing $argN in the return probe events. This will help users to
record entry data in function return (exit) event for simplfing the function
entry/exit information in one event, and record the result values (e.g.
allocated object/initialized object) at function exit.
For example, if we have a function `int init_foo(struct foo *obj, int param)`
sometimes we want to check how `obj` is initialized. In such case, we can
define a new return event like below;
# echo 'r init_foo retval=$retval param=$arg2 field1=+0($arg1)' >> kprobe_events
Thus it records the function parameter `param` and its result `obj->field1`
(the dereference will be done in the function exit timing) value at once.
This also support fprobe, BTF args and'$arg*'. So if CONFIG_DEBUG_INFO_BTF
is enabled, we can trace both function parameters and the return value
by following command.
# echo 'f target_function%return $arg* $retval' >> dynamic_events
Link: https://lore.kernel.org/all/170952365552.229804.224112990211602895.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Add a test to exercize cpu hotplug with the function tracer active to
ensure that sensitive functions in idle path are excluded from being
traced. This helps catch issues such as the one fixed by commit
4b3338aaa7 ("powerpc/ftrace: Fix stack teardown in ftrace_no_trace").
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Resolves a spelling error in the test log, preventing potential
confusion.
Signed-off-by: Vincenzo Mezzela <vincenzo.mezzela@gmail.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Steven Rostedt
Linus Torvalds
Masami Hiramatsu (Google)
Hari Bathini
Kalesh Singh
Donglin Peng
Mark Brown
Ye Bin
Yuanhe Shu
Mark Rutland
Ingo Molnar
Naveen N Rao
Vincenzo Mezzela