linux/drivers/input/misc
Linus Torvalds dcab75a3c8 * Maxim MAX77705:
* Added core MFD driver.
     * Added charger driver.
     * Added devicetree bindings for the charger and MFD core.
     * Added Haptic controller support via the input subsystem.
     * Added LED support.
     * Added support to simple-mfd-i2c for fuel gauge and hwmon.
   * Samsung S2MPU05 (Exynos7870 PMIC):
     * Added core MFD support.
     * Added Regulator support for 21 LDOs and 5 BUCKs.
     * Added devicetree bindings for regulators and the PMIC core.
   * TI TPS65215 & TPS65214:
     * Added support to the existing TPS65219 driver.
     * Added devicetree bindings.
   * STMicroelectronics STM32MP25:
     * Added support to the stm32-timers MFD driver.
     * Added devicetree bindings.
   * Congatec Board Controller (CGBC):
     * Added HWMON support for internal sensors.
     * Added support for the conga-SA8 module.
   * Microchip LAN969X:
     * Enabled the at91-usart MFD driver for this architecture.
   * MediaTek MT6359:
     * Added mfd_cell for mt6359-accdet to allow its driver to probe.
 
   * AXP20X (AXP717): Added AXP717_TS_PIN_CFG register to writeable
     regs for temperature sensor configuration.
   * SM501: Switched to using BIT() macro to mitigate potential
     integer overflows in GPIO functions.
   * ENE KB3930: Added a NULL pointer check for off_gpios during
     probe to prevent potential dereference.
   * SYSCON: Added a check for invalid resource size to prevent
     issues from DT misconfiguration.
   * CGBC: Corrected signedness issues in cgbc_session_request.
 
   * intel_soc_pmic_chtdc_ti / intel_soc_pmic_crc: Removed unneeded
     explicit assignment to REGCACHE_NONE.
   * ipaq-micro / tps65010: Switched to using str_enable_disable()
     helpers for clarity and potential size reduction.
   * upboard-fpga: Removed unnecessary ACPI_PTR() annotation.
   * max8997: Removed unused max8997_irq_exit() function, using
     devm_* helpers instead.
   * lp3943: Dropped unused #include <linux/pwm.h> from the header
     file.
   * db8500-prcmu: Removed needless return statements in void APIs.
   * qnap-mcu: Replaced commas with semicolons between expressions
     for correctness.
 
   * STA2X11: Removed the core MFD driver as the underlying
     platform support was removed.
   * EZX-PCAP: Removed the unused pcap_adc_sync function.
   * PCF50633 (OpenMoko PMIC): Removed the entire driver (core, adc,
     gpio, irq) as the underlying s3c24xx platform support was removed.
 
   * Converted fsl,mcu-mpc8349emitx binding to YAML.
   * Added qcom,msm8937-tcsr compatible.
   * Added microchip,sama7d65-flexcom compatible.
   * Added rockchip,rk3528-qos syscon compatible.
   * Added airoha,en7581-pbus-csr syscon compatible.
   * Added microchip,sama7d65-ddr3phy syscon compatible.
   * Added microchip,sama7d65-sfrbu syscon compatible.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmfmqKQACgkQUa+KL4f8
 d2G+rA//UU3UixCD8FsNN+o4DS7FbxdiSUCrATOBKia9MGfor4xCl6Qk9ZyO4sE1
 Rr9zUrTb1xlCmMZupZlkV8TDHHcaiUbgmnKB161d4HMxCbju10MKlm7faz2vRMz3
 a73ehTmUeNDiWG3t1/2zAyRt7PHPC2zakUlnXlLhLir12uR2jsDSeGOZh4xR7Hdi
 5nkOA2xWbbeW4b+ybwZ32afbLtZFkLo80QvqDx/D9lMUnQO0FqKak0Zope7IzeqC
 ilg+tIJOQRGEbjEVQ+pVXsPI6zfmO8eAja70F7sm+Q6TVDw2JhHU/YElHw+quiP+
 aLYeE+DuSun1EYlK4ATQ0vzUdgsaOEWblF0eythctXFTfM9ZKhzWYdXEOvco7N4u
 R9BYRtM/zGkxiScbr6igyjWZx7NPOsKEKIi5tOv+C2BAKb53om7vsNuMgvMDL/8W
 gztmG0SMKwJSx2Dg7h1LLUfa3tG9QRFd0I+Yfaso3MtYmxnZVcJtM5IQbvzf6i/B
 3fSiGP6PDNeJqbn9k3/7SB8Tb4XmJUN2LFdDtDuWVhgZpSDULkjpYxAXDIrbp+il
 QNdLPiU1x7OzPkFZQxtXLt7yRmlEc2lu9jJHkGVM1M18TMexQiFxoSY9NxkbUj3o
 T4s/PKGmRKHP9XxCmRSfu6Veql0MPUwtvkErlUf4GTLWK4oshag=
 =ntF1
 -----END PGP SIGNATURE-----

Merge tag 'mfd-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Maxim MAX77705:
   - Added core MFD driver.
   - Added charger driver.
   - Added devicetree bindings for the charger and MFD core.
   - Added Haptic controller support via the input subsystem.
   - Added LED support.
   - Added support to simple-mfd-i2c for fuel gauge and hwmon.

  Samsung S2MPU05 (Exynos7870 PMIC):
   - Added core MFD support.
   - Added Regulator support for 21 LDOs and 5 BUCKs.
   - Added devicetree bindings for regulators and the PMIC core.

  TI TPS65215 & TPS65214:
   - Added support to the existing TPS65219 driver.
   - Added devicetree bindings.

  STMicroelectronics STM32MP25:
   - Added support to the stm32-timers MFD driver.
   - Added devicetree bindings.

  Congatec Board Controller (CGBC):
   - Added HWMON support for internal sensors.
   - Added support for the conga-SA8 module.

  Microchip LAN969X:
   - Enabled the at91-usart MFD driver for this architecture.

  MediaTek MT6359:
   - Added mfd_cell for mt6359-accdet to allow its driver to probe.

  Other misc driver updates:
   - AXP20X (AXP717): Added AXP717_TS_PIN_CFG register to writeable regs
     for temperature sensor configuration.
   - SM501: Switched to using BIT() macro to mitigate potential integer
     overflows in GPIO functions.
   - ENE KB3930: Added a NULL pointer check for off_gpios during probe
     to prevent potential dereference.
   - SYSCON: Added a check for invalid resource size to prevent issues
     from DT misconfiguration.
   - CGBC: Corrected signedness issues in cgbc_session_request
   - intel_soc_pmic_chtdc_ti / intel_soc_pmic_crc: Removed unneeded
     explicit assignment to REGCACHE_NONE.
   - ipaq-micro / tps65010: Switched to using str_enable_disable()
     helpers for clarity and potential size reduction.
   - upboard-fpga: Removed unnecessary ACPI_PTR() annotation.
   - max8997: Removed unused max8997_irq_exit() function, using devm_*
     helpers instead.
   - lp3943: Dropped unused #include <linux/pwm.h> from the header file.
   - db8500-prcmu: Removed needless return statements in void APIs.
   - qnap-mcu: Replaced commas with semicolons between expressions for
     correctness.
   - STA2X11: Removed the core MFD driver as the underlying platform
     support was removed.
   - EZX-PCAP: Removed the unused pcap_adc_sync function.
   - PCF50633 (OpenMoko PMIC): Removed the entire driver (core, adc,
     gpio, irq) as the underlying s3c24xx platform support was removed.

  Devicetree updates:
   - Converted fsl,mcu-mpc8349emitx binding to YAML
   - Added qcom,msm8937-tcsr compatible
   - Added microchip,sama7d65-flexcom compatible
   - Added rockchip,rk3528-qos syscon compatible
   - Added airoha,en7581-pbus-csr syscon compatible
   - Added microchip,sama7d65-ddr3phy syscon compatible
   - Added microchip,sama7d65-sfrbu syscon compatible"

* tag 'mfd-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (49 commits)
  mfd: cgbc-core: Add support for conga-SA8
  dt-bindings: mfd: syscon: Add microchip,sama7d65-sfrbu
  dt-bindings: mfd: syscon: Add microchip,sama7d65-ddr3phy
  mfd: cgbc: Add support for HWMON
  dt-bindings: mfd: syscon: Add the pbus-csr node for Airoha EN7581 SoC
  mfd: cgbc-core: Cleanup signedness in cgbc_session_request()
  mfd: pcf50633: Remove remaining PCF50633 support
  mfd: pcf50633: Remove unused platform IRQ code
  mfd: pcF50633-gpio: Remove unused driver
  mfd: pcf50633-adc: Remove unused driver
  mfd: qnap-mcu: Convert commas to semicolons in qnap_mcu_exec()
  mfd: mt6397-core: Add mfd_cell for mt6359-accdet
  dt-bindings: mfd: syscon: Add rk3528 QoS register compatible
  dt-bindings: mfd: atmel,sama5d2-flexcom: Add microchip,sama7d65-flexcom
  mfd: ezx-pcap: Remove unused pcap_adc_sync
  mfd: db8500-prcmu: Remove needless return in three void APIs
  mfd: Remove STA2x11 core driver
  mfd: max77620: Allow building as a module
  mfd: ene-kb3930: Fix a potential NULL pointer dereference
  dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8937
  ...
2025-03-29 14:33:13 -07:00
..
88pm80x_onkey.c Input: switch back to struct platform_driver::remove() 2024-10-15 11:43:25 -07:00
88pm860x_onkey.c Input: 88pm860x - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() 2023-01-09 20:25:20 -08:00
88pm886-onkey.c input: Add onkey driver for Marvell 88PM886 PMIC 2024-06-28 15:41:20 +01:00
Kconfig Input: max77693 - add max77705 haptic support 2025-02-20 16:37:47 +00:00
Makefile Input: add driver for the input part of qnap-mcu devices 2024-12-17 13:14:42 +00:00
ab8500-ponkey.c Input: ab8500-ponkey - fix incorrect name in 'ab8500_ponkey' doc header 2020-11-08 22:27:54 -08:00
ad714x-i2c.c Input: drop explicit initialization of struct i2c_device_id::driver_data to 0 2024-05-13 15:43:19 -07:00
ad714x-spi.c Input: ad714x - unify dev_pm_ops using EXPORT_SIMPLE_DEV_PM_OPS() 2023-01-27 14:49:52 -08:00
ad714x.c Input: ad714x - use guard notation when acquiring mutex 2024-10-03 09:10:35 -07:00
ad714x.h Input: ad714x - unify dev_pm_ops using EXPORT_SIMPLE_DEV_PM_OPS() 2023-01-27 14:49:52 -08:00
adxl34x-i2c.c Input: adxl34x - switch to using managed resources 2024-06-11 11:17:44 -07:00
adxl34x-spi.c Input: adxl34x - switch to using managed resources 2024-06-11 11:17:44 -07:00
adxl34x.c Input: adxl34x - switch to using "guard" notation 2024-06-11 11:17:52 -07:00
adxl34x.h Input: adxl34x - switch to using managed resources 2024-06-11 11:17:44 -07:00
apanel.c Input: drop explicit initialization of struct i2c_device_id::driver_data to 0 2024-05-13 15:43:19 -07:00
ariel-pwrbutton.c Input: ariel-pwrbutton - add SPI device ID table 2021-10-01 21:24:14 -07:00
arizona-haptics.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
atc260x-onkey.c input: atc260x: Add onkey driver for ATC260x PMICs 2021-03-10 11:10:30 +00:00
ati_remote2.c Input: ati_remote2 - use guard notation when acquiring mutex 2024-10-03 09:10:35 -07:00
atlas_btns.c Input: atlas - drop owner assignment 2024-04-08 16:16:55 +02:00
atmel_captouch.c Input: drop explicit initialization of struct i2c_device_id::driver_data to 0 2024-05-13 15:43:19 -07:00
axp20x-pek.c Input: axp20x-pek - avoid needless newline removal 2023-09-30 09:35:31 -07:00
bma150.c Input: drop explicit initialization of struct i2c_device_id::driver_data to 0 2024-05-13 15:43:19 -07:00
cm109.c Input: cm109 - use guard notation when acquiring mutex and spinlock 2024-10-03 09:10:35 -07:00
cma3000_d0x.c Input: cma3000_d0x - use guard notation when acquiring mutex 2024-10-03 09:10:35 -07:00
cma3000_d0x.h treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234 2019-06-19 17:09:07 +02:00
cma3000_d0x_i2c.c Input: drop explicit initialization of struct i2c_device_id::driver_data to 0 2024-05-13 15:43:19 -07:00
cobalt_btns.c Input: cobalt_btns - switch to using polled mode of input devices 2019-10-29 17:14:17 -07:00
cpcap-pwrbutton.c Input: cpcap-pwrbutton - replace GPLv2 boilerplate with SPDX 2023-07-05 14:50:00 -07:00
cs40l50-vibra.c Input: cs40l50 - fix wrong usage of INIT_WORK() 2024-11-07 21:54:44 -08:00
da7280.c Input: da7280 - use guard notation when acquiring mutex and spinlock 2024-10-03 09:10:35 -07:00
da9052_onkey.c Input: switch back to struct platform_driver::remove() 2024-10-15 11:43:25 -07:00
da9055_onkey.c Input: switch back to struct platform_driver::remove() 2024-10-15 11:43:25 -07:00
da9063_onkey.c Input: da9063_onkey - avoid explicitly setting input's parent 2024-01-04 12:02:20 -08:00
drv260x.c Input: drv260x - use guard notation when acquiring mutex 2024-10-03 09:10:36 -07:00
drv2665.c Input: drv2665 - use guard notation when acquiring mutex 2024-10-03 09:10:36 -07:00
drv2667.c Input: drv2667 - use guard notation when acquiring mutex 2024-10-03 09:10:36 -07:00
e3x0-button.c Input: e3x0-button - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() 2023-01-09 20:25:21 -08:00
gpio-beeper.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 2019-05-30 11:26:32 -07:00
gpio-vibra.c Input: Explicitly include correct DT includes 2023-07-17 10:03:07 -07:00
gpio_decoder.c treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_30.RULE (part 2) 2022-06-10 14:51:35 +02:00
hisi_powerkey.c Input: remove dev_err() usage after platform_get_irq() 2019-08-14 10:49:01 -07:00
hp_sdc_rtc.c Input: hp_sdc_rtc - mark an unused function as __maybe_unused 2023-02-21 13:57:40 -08:00
ibm-panel.c Input: ibm-panel - use guard notation when acquiring spinlock 2024-10-03 09:10:36 -07:00
ideapad_slidebar.c Input: i8042 - Add support for platform filter contexts 2025-01-15 16:26:39 +02:00
ims-pcu.c Input updates for v6.13-rc0 2024-11-25 10:31:39 -08:00
iqs269a.c Input: iqs269a - use cleanup facility for fwnodes 2024-10-03 09:10:37 -07:00
iqs626a.c Input: iqs626a - use cleanup facility for fwnodes 2024-10-03 09:10:37 -07:00
iqs7222.c Input: iqs7222 - preserve system status register 2025-03-09 23:12:07 -07:00
keyspan_remote.c Input: move from strlcpy with unused retval to strscpy 2022-08-18 15:44:08 -07:00
kxtj9.c Input: kxtj9 - use guard notation when acquiring mutex/disabling irq 2024-10-03 09:10:36 -07:00
m68kspkr.c Input: switch back to struct platform_driver::remove() 2024-10-15 11:43:25 -07:00
max8925_onkey.c Input: max8925_onkey - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() 2023-01-09 20:25:21 -08:00
max8997_haptic.c Input: switch back to struct platform_driver::remove() 2024-10-15 11:43:25 -07:00
max77650-onkey.c Input: max77650-onkey - add of_match table 2020-01-16 20:23:24 -08:00
max77693-haptic.c Input: max77693 - add max77705 haptic support 2025-02-20 16:37:47 +00:00
mc13783-pwrbutton.c Input: switch back to struct platform_driver::remove() 2024-10-15 11:43:25 -07:00
mma8450.c Input: mma8450 - add chip ID check in probe 2024-12-17 11:11:46 -08:00
nxp-bbnsm-pwrkey.c Input: bbnsm_pwrkey - add remove hook 2024-12-16 09:34:16 -08:00
palmas-pwrbutton.c Input: switch back to struct platform_driver::remove() 2024-10-15 11:43:25 -07:00
pcap_keys.c Input: switch back to struct platform_driver::remove() 2024-10-15 11:43:25 -07:00
pcf8574_keypad.c Input: drop explicit initialization of struct i2c_device_id::driver_data to 0 2024-05-13 15:43:19 -07:00
pcf50633-input.c Input: switch back to struct platform_driver::remove() 2024-10-15 11:43:25 -07:00
pcspkr.c Input: switch back to struct platform_driver::remove() 2024-10-15 11:43:25 -07:00
pm8xxx-vibrator.c input: pm8xxx-vibrator: add new SPMI vibrator support 2024-04-17 15:27:12 -07:00
pm8941-pwrkey.c Input: switch back to struct platform_driver::remove() 2024-10-15 11:43:25 -07:00
pmic8xxx-pwrkey.c Input: Explicitly include correct DT includes 2023-07-17 10:03:07 -07:00
powermate.c Input: powermate - use guard notation when acquiring spinlock 2024-10-03 09:10:37 -07:00
pwm-beeper.c Input: pwm-beeper - use guard notation when acquiring spinlock 2024-10-03 09:10:37 -07:00
pwm-vibra.c pwm: Rename pwm_apply_state() to pwm_apply_might_sleep() 2023-12-20 16:07:04 +01:00
qnap-mcu-input.c Input: add driver for the input part of qnap-mcu devices 2024-12-17 13:14:42 +00:00
rave-sp-pwrbutton.c
rb532_button.c Input: rb532_button - switch to using polled mode of input devices 2019-10-29 17:15:46 -07:00
regulator-haptic.c Input: Use str_enable_disable-like helpers 2025-01-14 13:41:41 -08:00
retu-pwrbutton.c
rk805-pwrkey.c Input: rk805-pwrkey - fix module autoloading 2022-08-22 16:59:49 -07:00
rotary_encoder.c Input: rotary_encoder - use guard notation when acquiring mutex 2024-10-03 09:10:38 -07:00
rt5120-pwrkey.c Input: rt5120 - add power key support 2022-08-31 15:48:49 -07:00
sc27xx-vibra.c Input: sc27xx - add support for sc2730 and sc2721 2020-12-11 19:00:21 -08:00
sgi_btns.c Input: add missing MODULE_DESCRIPTION() macros 2024-06-09 14:38:48 -07:00
soc_button_array.c Input: switch back to struct platform_driver::remove() 2024-10-15 11:43:25 -07:00
sparcspkr.c Input: sparcspkr - use cleanup facility for device_node 2024-10-22 13:58:39 -07:00
stpmic1_onkey.c Input: stpmic1_onekey - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() 2023-01-09 20:25:23 -08:00
tps65218-pwrbutton.c treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE 2022-06-10 14:51:36 +02:00
tps65219-pwrbutton.c Input: switch back to struct platform_driver::remove() 2024-10-15 11:43:25 -07:00
twl4030-pwrbutton.c Input: twl4030-pwrbutton - fix kernel-doc warning 2024-07-11 09:57:58 -07:00
twl4030-vibra.c Input: twl4030-vibra - use cleanup facility for device_node 2024-10-19 21:21:40 -07:00
twl6040-vibra.c Input: twl6040-vibra - use cleanup facility for device_node 2024-10-19 21:21:39 -07:00
uinput.c [tree-wide] finally take no_llseek out 2024-09-27 08:18:43 -07:00
wistron_btns.c Input updates for v6.13-rc0 2024-11-25 10:31:39 -08:00
wm831x-on.c Input: switch back to struct platform_driver::remove() 2024-10-15 11:43:25 -07:00
xen-kbdfront.c xen: make remove callback of xen driver void returned 2022-12-15 16:06:10 +01:00
yealink.c Input: correct typos in multiple comments across misc drivers 2024-09-30 08:00:16 -07:00
yealink.h treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156 2019-05-30 11:26:35 -07:00