Core & protocols
----------------
- Replace busylock at the Tx queuing layer with a lockless list. Resulting
in a 300% (4x) improvement on heavy TX workloads, sending twice the
number of packets per second, for half the cpu cycles.
- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue. Normally we perform queue re-selection when flow comes out
of idle, but under extreme circumstances the flows may be constantly
busy. Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.
- Optimize the NAPI skb cache, make it larger, use it in more paths.
- Attempt returning Tx skbs to the originating CPU (like we already did
for Rx skbs).
- Various data structure layout and prefetch optimizations from Eric.
- Remove ktime_get() from the recvmsg() fast path, ktime_get() is sadly
quite expensive on recent AMD machines.
- Extend threaded NAPI polling to allow the kthread busy poll for packets.
- Make MPTCP use Rx backlog processing. This lowers the lock pressure,
improving the Rx performance.
- Support memcg accounting of MPTCP socket memory.
- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor fit
for modern container workloads, where limits are imposed using cgroups.
- Improve heuristics for when to kick off AF_UNIX garbage collection.
- Allow users to control TCP SACK compression, and default to 33% of RTT.
- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid unnecessarily
aggressive rcvbuf growth and overshot when the connection RTT is low.
- Preserve skb metadata space across skb_push / skb_pull operations.
- Support for IPIP encapsulation in the nftables flowtable offload.
- Support appending IP interface information to ICMP messages (RFC 5837).
- Support setting max record size in TLS (RFC 8449).
- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.
- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.
- Let users configure the number of write buffers in SMC.
- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.
- Some conversions away from the crypto_ahash API, from Eric Biggers.
- Some preparations for slimming down struct page.
- YAML Netlink protocol spec for WireGuard.
- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.
Driver API
----------
- Add CAN XL support to the CAN Netlink interface.
- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics,
as defined by the OPEN Alliance's "Advanced diagnostic features
for 100BASE-T1 automotive Ethernet PHYs" specification.
- Add DPLL phase-adjust-gran pin attribute (and implement it in zl3073x).
- Refactor xfrm_input lock to reduce contention when NIC offloads IPsec
and performs RSS.
- Add info to devlink params whether the current setting is the default
or a user override. Allow resetting back to default.
- Add standard device stats for PSP crypto offload.
- Leverage DSA frame broadcast to implement simple HSR frame duplication
for a lot of switches without dedicated HSR offload.
- Add uAPI defines for 1.6Tbps link modes.
Device drivers
--------------
- Add Motorcomm YT921x gigabit Ethernet switch support.
- Add MUCSE driver for N500/N210 1GbE NIC series.
- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.
- Add (and convert most drivers to) a dedicated ethtool callback
for reading the Rx ring count.
- Significant refactoring efforts in the STMMAC driver, which supports
Synopsys turn-key MAC IP integrated into a ton of SoCs.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as other
drivers) to avoid wasting resources if feature is unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules
- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device
- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices
- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control
- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality
- Bluetooth:
- add initial support for PASTa
- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211 debugfs
interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements
- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=UoDR
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Replace busylock at the Tx queuing layer with a lockless list.
Resulting in a 300% (4x) improvement on heavy TX workloads, sending
twice the number of packets per second, for half the cpu cycles.
- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue.
Normally we perform queue re-selection when flow comes out of idle,
but under extreme circumstances the flows may be constantly busy.
Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.
- Optimize the NAPI skb cache, make it larger, use it in more paths.
- Attempt returning Tx skbs to the originating CPU (like we already
did for Rx skbs).
- Various data structure layout and prefetch optimizations from Eric.
- Remove ktime_get() from the recvmsg() fast path, ktime_get() is
sadly quite expensive on recent AMD machines.
- Extend threaded NAPI polling to allow the kthread busy poll for
packets.
- Make MPTCP use Rx backlog processing. This lowers the lock
pressure, improving the Rx performance.
- Support memcg accounting of MPTCP socket memory.
- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor
fit for modern container workloads, where limits are imposed using
cgroups.
- Improve heuristics for when to kick off AF_UNIX garbage collection.
- Allow users to control TCP SACK compression, and default to 33% of
RTT.
- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid
unnecessarily aggressive rcvbuf growth and overshot when the
connection RTT is low.
- Preserve skb metadata space across skb_push / skb_pull operations.
- Support for IPIP encapsulation in the nftables flowtable offload.
- Support appending IP interface information to ICMP messages (RFC
5837).
- Support setting max record size in TLS (RFC 8449).
- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.
- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.
- Let users configure the number of write buffers in SMC.
- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.
- Some conversions away from the crypto_ahash API, from Eric Biggers.
- Some preparations for slimming down struct page.
- YAML Netlink protocol spec for WireGuard.
- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.
Driver API:
- Add CAN XL support to the CAN Netlink interface.
- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as
defined by the OPEN Alliance's "Advanced diagnostic features for
100BASE-T1 automotive Ethernet PHYs" specification.
- Add DPLL phase-adjust-gran pin attribute (and implement it in
zl3073x).
- Refactor xfrm_input lock to reduce contention when NIC offloads
IPsec and performs RSS.
- Add info to devlink params whether the current setting is the
default or a user override. Allow resetting back to default.
- Add standard device stats for PSP crypto offload.
- Leverage DSA frame broadcast to implement simple HSR frame
duplication for a lot of switches without dedicated HSR offload.
- Add uAPI defines for 1.6Tbps link modes.
Device drivers:
- Add Motorcomm YT921x gigabit Ethernet switch support.
- Add MUCSE driver for N500/N210 1GbE NIC series.
- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.
- Add (and convert most drivers to) a dedicated ethtool callback for
reading the Rx ring count.
- Significant refactoring efforts in the STMMAC driver, which
supports Synopsys turn-key MAC IP integrated into a ton of SoCs.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as
other drivers) to avoid wasting resources if feature is
unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules
- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor
format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device
- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices
- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control
- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality
- Bluetooth:
- add initial support for PASTa
- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211
debugfs interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements
- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support"
* tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits)
net: page_pool: sanitise allocation order
net: page pool: xa init with destroy on pp init
net/mlx5e: Support XDP target xmit with dummy program
net/mlx5e: Update XDP features in switch channels
selftests/tc-testing: Test CAKE scheduler when enqueue drops packets
net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop
wireguard: netlink: generate netlink code
wireguard: uapi: generate header with ynl-gen
wireguard: uapi: move flag enums
wireguard: uapi: move enum wg_cmd
wireguard: netlink: add YNL specification
selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py
selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py
selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py
selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py
selftests: drv-net: introduce Iperf3Runner for measurement use cases
selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS
net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive()
Documentation: net: dsa: mention simple HSR offload helpers
Documentation: net: dsa: mention availability of RedBox
...
build-system thrashing. That work should slow down from here on out.
- The various scripts and tools for documentation were spread out in
several directories; now they are (almost) all coalesced under
tools/docs/. The holdout is the kernel-doc script, which cannot be
easily moved without some further thought.
- As the amount of Python code increases, we are accumulating modules that
are imported by multiple programs. These modules have been pulled
together under tools/lib/python/ -- at least, for documentation-related
programs. There is other Python code in the tree that might eventually
want to move toward this organization.
- The Perl kernel-doc.pl script has been removed. It is no longer used by
default, and nobody has missed it, least of all anybody who actually had
to look at it.
- The docs build was controlled by a complex mess of makefilese that few
dared to touch. Mauro has moved that logic into a new program
(tools/docs/sphinx-build-wrapper) that, with any luck at all, will be far
easier to understand and maintain.
- The get_feat.pl program, used to access information under
Documentation/features/, has been rewritten in Python, bringing an end to
the use of Perl in the docs subsystem.
- The top-level README file has been reorganized into a more
reader-friendly presentation.
- A lot of Chinese translation additions
- Typo fixes and documentation updates as usual
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmkuHzEACgkQF0NaE2wM
flgiqAf/aFUA3zCMvOSjbOpX8EO/4rs0ISkhhb01rLSMsRs3P+v9SlGVJls734BE
0ZvVmBo0p7mNakZD4tFCryFn8Gntn28smCEmpDu/FRDMOEcXFUqxQ9st9OhRlar2
tETdFIKIF+yncFJ83Mjr7F5Yeqg38m82g5JdTxvh6FmvDhPLiSXDEeBV2L7hU+St
EX8D8KOZH74XM8LMr8eg3GbUXx72A7WELndlF7DfGIAC8rFC3C9wa0CUSx8wz2Zh
CoCOYsrmd7WdB+c30SUmQbtYLVyWraiqVQVUlCdZDeYPBT/mTo6zJI5L0WxgXuHz
6o+fQdfLA7zlMHTelVcM6y4Qwkmayg==
=1TPY
-----END PGP SIGNATURE-----
Merge tag 'docs-6.19' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"This has been another busy cycle for documentation, with a lot of
build-system thrashing. That work should slow down from here on out.
- The various scripts and tools for documentation were spread out in
several directories; now they are (almost) all coalesced under
tools/docs/. The holdout is the kernel-doc script, which cannot be
easily moved without some further thought.
- As the amount of Python code increases, we are accumulating modules
that are imported by multiple programs. These modules have been
pulled together under tools/lib/python/ -- at least, for
documentation-related programs. There is other Python code in the
tree that might eventually want to move toward this organization.
- The Perl kernel-doc.pl script has been removed. It is no longer
used by default, and nobody has missed it, least of all anybody who
actually had to look at it.
- The docs build was controlled by a complex mess of makefilese that
few dared to touch. Mauro has moved that logic into a new program
(tools/docs/sphinx-build-wrapper) that, with any luck at all, will
be far easier to understand and maintain.
- The get_feat.pl program, used to access information under
Documentation/features/, has been rewritten in Python, bringing an
end to the use of Perl in the docs subsystem.
- The top-level README file has been reorganized into a more
reader-friendly presentation.
- A lot of Chinese translation additions
- Typo fixes and documentation updates as usual"
* tag 'docs-6.19' of git://git.lwn.net/linux: (164 commits)
docs: makefile: move rustdoc check to the build wrapper
README: restructure with role-based documentation and guidelines
docs: kdoc: various fixes for grammar, spelling, punctuation
docs: kdoc_parser: use '@' for Excess enum value
docs: submitting-patches: Clarify that removal of Acks needs explanation too
docs: kdoc_parser: add data/function attributes to ignore
docs: MAINTAINERS: update Mauro's files/paths
docs/zh_CN: Add wd719x.rst translation
docs/zh_CN: Add libsas.rst translation
get_feat.pl: remove it, as it got replaced by get_feat.py
Documentation/sphinx/kernel_feat.py: use class directly
tools/docs/get_feat.py: convert get_feat.pl to Python
Documentation/admin-guide: fix typo and comment in cscope example
docs/zh_CN: Add data-integrity.rst translation
docs/zh_CN: Add blk-mq.rst translation
docs/zh_CN: Add block/index.rst translation
docs/zh_CN: Update the Chinese translation of kbuild.rst
docs: bring some order to our Python module hierarchy
docs: Move the python libraries to tools/lib/python
Documentation/kernel-parameters: Move the kernel build options
...
Introduce a generic infrastructure for tracking recoverable hardware
errors (HW errors that are visible to the OS but does not cause a panic)
and record them for vmcore consumption. This aids post-mortem crash
analysis tools by preserving a count and timestamp for the last occurrence
of such errors. On the other side, correctable errors, which the OS
typically remains unaware of because the underlying hardware handles them
transparently, are less relevant for crash dump and therefore are NOT
tracked in this infrastructure.
Add centralized logging for sources of recoverable hardware errors based
on the subsystem it has been notified.
hwerror_data is write-only at kernel runtime, and it is meant to be read
from vmcore using tools like crash/drgn. For example, this is how it
looks like when opening the crashdump from drgn.
>>> prog['hwerror_data']
(struct hwerror_info[1]){
{
.count = (int)844,
.timestamp = (time64_t)1752852018,
},
...
This helps fleet operators quickly triage whether a crash may be
influenced by hardware recoverable errors (which executes a uncommon code
path in the kernel), especially when recoverable errors occurred shortly
before a panic, such as the bug fixed by commit ee62ce7a1d ("page_pool:
Track DMA-mapped pages and unmap them when destroying the pool")
This is not intended to replace full hardware diagnostics but provides a
fast way to correlate hardware events with kernel panics quickly.
Rare machine check exceptions—like those indicated by mce_flags.p5 or
mce_flags.winchip—are not accounted for in this method, as they fall
outside the intended usage scope for this feature's user base.
[leitao@debian.org: add hw-recoverable-errors to toctree]
Link: https://lkml.kernel.org/r/20251127-vmcoreinfo_fix-v1-1-26f5b1c43da9@debian.org
Link: https://lkml.kernel.org/r/20251010-vmcore_hw_error-v5-1-636ede3efe44@debian.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Suggested-by: Tony Luck <tony.luck@intel.com>
Suggested-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com> [APEI]
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Bob Moore <robert.moore@intel.com>
Cc: Borislav Betkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morse <james.morse@arm.com>
Cc: Konrad Rzessutek Wilk <konrad.wilk@oracle.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: "Oliver O'Halloran" <oohall@gmail.com>
Cc: Omar Sandoval <osandov@osandov.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There are two kernel-doc like descriptions at cper, which is used
by other parts of cper and on ghes driver. They both have kernel-doc
like descriptions.
Change the tags for them to be actual kernel-doc tags and add them
to the driver-api documentaion at the UEFI section.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Add documentation for longer term classification of workload type for
power or performance.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251118223620.554798-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reflect latest changes in p2p implementation to support DMABUF lifecycle.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Ankit Agrawal <ankita@nvidia.com>
Link: https://lore.kernel.org/r/20251120-dmabuf-vfio-v9-5-d7f71607f371@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
I went through all the datasheets and created this note listing
chip functions and register layouts.
Signed-off-by: Levente Révész <levente.revesz@eilabs.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20251112224924.2091880-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Move the WMI core code into a separate directory to prepare for
future additions to the WMI driver. Also update the description
of the Kconfig entry to better fit with the other subsystem
Kconfig entries.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20251111131125.3379-5-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
For lack of a better place to put it, Resizable BAR code has been placed
inside pci.c and setup-res.c that do not use it for anything. Upcoming
changes are going to add more Resizable BAR related functions, increasing
the code size.
As pci.c is huge as is, move the Resizable BAR related code and the BAR
resize code from setup-res.c to rebar.c.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20251113180053.27944-2-ilpo.jarvinen@linux.intel.com
Add to the driver-api documentation the v4l2-isp.h types and
helpers documentation.
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Michael Riesch <michael.riesch@collabora.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Commit be9d0411f1 ("parport-lowlevel.txt: standardize document
format") reSTify parport interface documentation but forgets to properly
mark function listing code blocks up. As such, these are rendered as
long-running normal paragraph instead.
Fix them by adding missing separator between the code block marker and
the listing.
Fixes: be9d0411f1 ("parport-lowlevel.txt: standardize document format")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251105124947.45048-1-bagasdotme@gmail.com>
Bit 31-30 usage table is already formatted as reST simple table, but it
is wrapped in literal code block instead. Unwrap it.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20251105124707.44736-2-bagasdotme@gmail.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Some adjustments pointed out by Randy:
"decodes an full 64-bit" -> "decodes the full 64 bit"
Correct the function parameter name for iova_to_phys()
Use the recommended section heading style.
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: ab0b572847 ("genpt: Add Documentation/ files")
Fixes: 879ced2bab ("iommupt: Add the AMD IOMMU v1 page table format")
Fixes: 9d4c274cd7 ("iommupt: Add iova_to_phys op")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Stephen Rothwell reports htmldocs warning when merging iommu tree:
Documentation/driver-api/generic_pt.rst:32: WARNING: Literal block expected; none found. [docutils]
This is because of duplicate double colon code block markers: one after
generic_pt/fmt/iommu_amdv1.c and the one in its preceding paragraph. The
resulting htmldocs, however, only marks the include listing (after the
former) up as it should be.
Drop the latter to fix the warning.
Fixes: ab0b572847 ("genpt: Add Documentation/ files")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20251106143925.578e411b@canb.auug.org.au/
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
pldmfw library overview section is formatted as title heading (the
second title of index.rst), making it listed in driver-api toctree.
Demote the section.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251103030228.23851-1-bagasdotme@gmail.com>
Add some general description and pull in the kdoc comments from the source
file to index most of the useful functions.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Tested-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The PCIe 7.0 specification, section 11, defines the Trusted Execution
Environment (TEE) Device Interface Security Protocol (TDISP). This
protocol definition builds upon Component Measurement and Authentication
(CMA), and link Integrity and Data Encryption (IDE). It adds support for
assigning devices (PCI physical or virtual function) to a confidential VM
such that the assigned device is enabled to access guest private memory
protected by technologies like Intel TDX, AMD SEV-SNP, RISCV COVE, or ARM
CCA.
The "TSM" (TEE Security Manager) is a concept in the TDISP specification
of an agent that mediates between a "DSM" (Device Security Manager) and
system software in both a VMM and a confidential VM. A VMM uses TSM ABIs
to setup link security and assign devices. A confidential VM uses TSM
ABIs to transition an assigned device into the TDISP "RUN" state and
validate its configuration. From a Linux perspective the TSM abstracts
many of the details of TDISP, IDE, and CMA. Some of those details leak
through at times, but for the most part TDISP is an internal
implementation detail of the TSM.
CONFIG_PCI_TSM adds an "authenticated" attribute and "tsm/" subdirectory
to pci-sysfs. Consider that the TSM driver may itself be a PCI driver.
Userspace can watch for the arrival of a "TSM" device,
/sys/class/tsm/tsm0/uevent KOBJ_CHANGE, to know when the PCI core has
initialized TSM services.
The operations that can be executed against a PCI device are split into
two mutually exclusive operation sets, "Link" and "Security" (struct
pci_tsm_{link,security}_ops). The "Link" operations manage physical link
security properties and communication with the device's Device Security
Manager firmware. These are the host side operations in TDISP. The
"Security" operations coordinate the security state of the assigned
virtual device (TDI). These are the guest side operations in TDISP.
Only "link" (Secure Session and physical Link Encryption) operations are
defined at this stage. There are placeholders for the device security
(Trusted Computing Base entry / exit) operations.
The locking allows for multiple devices to be executing commands
simultaneously, one outstanding command per-device and an rwsem
synchronizes the implementation relative to TSM registration/unregistration
events.
Thanks to Wu Hao for his work on an early draft of this support.
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Samuel Ortiz <sameo@rivosinc.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Alexey Kardashevskiy <aik@amd.com>
Co-developed-by: Xu Yilun <yilun.xu@linux.intel.com>
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Link: https://patch.msgid.link/20251031212902.2256310-5-dan.j.williams@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In the past, people would link to third-party mailing list archives
(like marc.info) for any kernel-related discussions. Now that there
is lore archive under kernel.org infrastructure, replace these marc
links
Note that the only remaining marc link is "Re: Memory mapping on Cirrus
EP9315" [1] since that thread is not available at lore [2].
[1]: https://marc.info/?l=linux-arm-kernel&m=110061245502000&w=2
[2]: https://lore.kernel.org/linux-arm-kernel/?q=b%3A%22Re%3A+Memory+mapping+on+Cirrus+EP9315%22
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Acked-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251031043358.23709-1-bagasdotme@gmail.com>
The node/zone quirk section of the cxl documentation is incorrect.
The actual reason for fallback allocation misbehavior in the
described configuration is due to a kswapd/reclaim thrashing scenario
fixed by the linked patch. Remove this section.
Link: https://lore.kernel.org/linux-mm/20250919162134.1098208-1-hannes@cmpxchg.org/
Signed-off-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Phase-adjust values are currently limited by a min-max range. Some
hardware requires, for certain pin types, that values be multiples of
a specific granularity, as in the zl3073x driver.
Add a `phase-adjust-gran` pin attribute and an appropriate field in
dpll_pin_properties. If set by the driver, use its value to validate
user-provided phase-adjust values.
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Petr Oros <poros@redhat.com>
Tested-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20251029153207.178448-2-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=BUw/
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Add PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() macros that
take config space accessor functions.
Implement pci_find_capability(), pci_find_ext_capability(), and
dwc, dwc endpoint, and cadence capability search interfaces with
them (Hans Zhang)
- Leave parent unit address 0 in 'interrupt-map' so that when we
build devicetree nodes to describe PCI functions that contain
multiple peripherals, we can build this property even when
interrupt controllers lack 'reg' properties (Lorenzo Pieralisi)
- Add a Xeon 6 quirk to disable Extended Tags and limit Max Read
Request Size to 128B to avoid a performance issue (Ilpo Järvinen)
- Add sysfs 'serial_number' file to expose the Device Serial Number
(Matthew Wood)
- Fix pci_acpi_preserve_config() memory leak (Nirmoy Das)
Resource management:
- Align m68k pcibios_enable_device() with other arches (Ilpo
Järvinen)
- Remove sparc pcibios_enable_device() implementations that don't do
anything beyond what pci_enable_resources() does (Ilpo Järvinen)
- Remove mips pcibios_enable_resources() and use
pci_enable_resources() instead (Ilpo Järvinen)
- Clean up bridge window sizing and assignment (Ilpo Järvinen),
including:
- Leave non-claimed bridge windows disabled
- Enable bridges even if a window wasn't assigned because not all
windows are required by downstream devices
- Preserve bridge window type when releasing the resource, since
the type is needed for reassignment
- Consolidate selection of bridge windows into two new
interfaces, pbus_select_window() and
pbus_select_window_for_type(), so this is done consistently
- Compute bridge window start and end earlier to avoid logging
stale information
MSI:
- Add quirk to disable MSI on RDC PCI to PCIe bridges (Marcos Del Sol
Vives)
Error handling:
- Align AER with EEH by allowing drivers to request a Bus Reset on
Non-Fatal Errors (in addition to the reset on Fatal Errors that we
already do) (Lukas Wunner)
- If error recovery fails, emit FAILED_RECOVERY uevents for the
devices, not for the bridge leading to them.
This makes them correspond to BEGIN_RECOVERY uevents (Lukas Wunner)
- Align AER with EEH by calling err_handler.error_detected()
callbacks to notify drivers if error recovery fails (Lukas Wunner)
- Align AER with EEH by restoring device error_state to
pci_channel_io_normal before the err_handler.slot_reset() callback.
This is earlier than before the err_handler.resume() callback
(Lukas Wunner)
- Emit a BEGIN_RECOVERY uevent when driver's
err_handler.error_detected() requests a reset, as well as when it
says recovery is complete or can be done without a reset (Niklas
Schnelle)
- Align s390 with AER and EEH by emitting uevents during error
recovery (Niklas Schnelle)
- Align EEH with AER and s390 by emitting BEGIN_RECOVERY,
SUCCESSFUL_RECOVERY, or FAILED_RECOVERY uevents depending on the
result of err_handler.error_detected() (Niklas Schnelle)
- Fix a NULL pointer dereference in aer_ratelimit() when ACPI GHES
error information identifies a device without an AER Capability
(Breno Leitao)
- Update error decoding and TLP Log printing for new errors in
current PCIe base spec (Lukas Wunner)
- Update error recovery documentation to match the current code
and use consistent nomenclature (Lukas Wunner)
ASPM:
- Enable all ClockPM and ASPM states for devicetree platforms, since
there's typically no firmware that enables ASPM
This is a risky change that may uncover hardware or configuration
defects at boot-time rather than when users enable ASPM via sysfs
later. Booting with "pcie_aspm=off" prevents this enabling
(Manivannan Sadhasivam)
- Remove the qcom code that enabled ASPM (Manivannan Sadhasivam)
Power management:
- If a device has already been disconnected, e.g., by a hotplug
removal, don't bother trying to resume it to D0 when detaching the
driver.
This avoids annoying "Unable to change power state from D3cold to
D0" messages (Mario Limonciello)
- Ensure devices are powered up before config reads for
'max_link_width', 'current_link_speed', 'current_link_width',
'secondary_bus_number', and 'subordinate_bus_number' sysfs files.
This prevents using invalid data (~0) in drivers or lspci and,
depending on how the PCIe controller reports errors, may avoid
error interrupts or crashes (Brian Norris)
Virtualization:
- Add rescan/remove locking when enabling/disabling SR-IOV, which
avoids list corruption on s390, where disabling SR-IOV also
generates hotplug events (Niklas Schnelle)
Peer-to-peer DMA:
- Free struct p2p_pgmap, not a member within it, in the
pci_p2pdma_add_resource() error path (Sungho Kim)
Endpoint framework:
- Document sysfs interface for BAR assignment of vNTB endpoint
functions (Jerome Brunet)
- Fix array underflow in endpoint BAR test case (Dan Carpenter)
- Skip endpoint IRQ test if the IRQ is out of range to avoid false
errors (Christian Bruel)
- Fix endpoint test case for controllers with fixed-size BARs smaller
than requested by the test (Marek Vasut)
- Restore inbound translation when disabling doorbell so the endpoint
doorbell test case can be run more than once (Niklas Cassel)
- Avoid a NULL pointer dereference when releasing DMA channels in
endpoint DMA test case (Shin'ichiro Kawasaki)
- Convert tegra194 interrupt number to MSI vector to fix endpoint
Kselftest MSI_TEST test case (Niklas Cassel)
- Reset tegra194 BARs when running in endpoint mode so the BAR tests
don't overwrite the ATU settings in BAR4 (Niklas Cassel)
- Handle errors in tegra194 BPMP transactions so we don't mistakenly
skip future PERST# assertion (Vidya Sagar)
AMD MDB PCIe controller driver:
- Update DT binding example to separate PERST# to a Root Port stanza
to make multiple Root Ports possible in the future (Sai Krishna
Musham)
- Add driver support for PERST# being described in a Root Port
stanza, falling back to the host bridge if not found there (Sai
Krishna Musham)
Freescale i.MX6 PCIe controller driver:
- Enable the 3.3V Vaux supply if available so devices can request
wakeup with either Beacon or WAKE# (Richard Zhu)
MediaTek PCIe Gen3 controller driver:
- Add optional sys clock ready time setting to avoid sys_clk_rdy
signal glitching in MT6991 and MT8196 (AngeloGioacchino Del Regno)
- Add DT binding and driver support for MT6991 and MT8196
(AngeloGioacchino Del Regno)
NVIDIA Tegra PCIe controller driver:
- When asserting PERST#, disable the controller instead of mistakenly
disabling the PLL twice (Nagarjuna Kristam)
- Convert struct tegra_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
Qualcomm PCIe controller driver:
- Select PCI Power Control Slot driver so slot voltage rails can be
turned on/off if described in Root Port devicetree node (Qiang Yu)
- Parse only PCI bridge child nodes in devicetree, skipping unrelated
nodes such as OPP (Operating Performance Points), which caused
probe failures (Krishna Chaitanya Chundru)
- Add 8.0 GT/s and 32.0 GT/s equalization settings (Ziyue Zhang)
- Consolidate Root Port 'phy' and 'reset' properties in struct
qcom_pcie_port, regardless of whether we got them from the Root
Port node or the host bridge node (Manivannan Sadhasivam)
- Fetch and map the ELBI register space in the DWC core rather than
in each driver individually (Krishna Chaitanya Chundru)
- Enable ECAM mechanism in DWC core by setting up iATU with 'CFG
Shift Feature' and use this in the qcom driver (Krishna Chaitanya
Chundru)
- Add SM8750 compatible to qcom,pcie-sm8550.yaml (Krishna Chaitanya
Chundru)
- Update qcom,pcie-x1e80100.yaml to allow fifth PCIe host on Qualcomm
Glymur, which is compatible with X1E80100 but doesn't have the
cnoc_sf_axi clock (Qiang Yu)
Renesas R-Car PCIe controller driver:
- Fix a typo that prevented correct PHY initialization (Marek Vasut)
- Add a missing 1ms delay after PWR reset assertion as required by
the V4H manual (Marek Vasut)
- Assure reset has completed before DBI access to avoid SError (Marek
Vasut)
- Fix inverted PHY initialization check, which sometimes led to
timeouts and failure to start the controller (Marek Vasut)
- Pass the correct IRQ domain to generic_handle_domain_irq() to fix a
regression when converting to msi_create_parent_irq_domain()
(Claudiu Beznea)
- Drop the spinlock protecting the PMSR register - it's no longer
required since pci_lock already serializes accesses (Marek Vasut)
- Convert struct rcar_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
SOPHGO PCIe controller driver:
- Check for existence of struct cdns_pcie.ops before using it to
allow Cadence drivers that don't need to supply ops (Chen Wang)
- Add DT binding and driver for the SOPHGO SG2042 PCIe controller
(Chen Wang)
STMicroelectronics STM32MP25 PCIe controller driver:
- Update pinctrl documentation of initial states and use in runtime
suspend/resume (Christian Bruel)
- Add pinctrl_pm_select_init_state() for use by stm32 driver, which
needs it during resume (Christian Bruel)
- Add devicetree bindings and drivers for the STMicroelectronics
STM32MP25 in host and endpoint modes (Christian Bruel)
Synopsys DesignWare PCIe controller driver:
- Add support for x16 in devicetree 'num-lanes' property (Konrad
Dybcio)
- Verify that if DT specifies a single IRQ for all eDMA channels, it
is named 'dma' (Niklas Cassel)
TI J721E PCIe driver:
- Add MODULE_DEVICE_TABLE() so driver can be autoloaded (Siddharth
Vadapalli)
- Power controller off before configuring the glue layer so the
controller latches the correct values on power-on (Siddharth
Vadapalli)
TI Keystone PCIe controller driver:
- Use devm_request_irq() so 'ks-pcie-error-irq' is freed when driver
exits with error (Siddharth Vadapalli)
- Add Peripheral Virtualization Unit (PVU), which restricts DMA from
PCIe devices to specific regions of host memory, to the ti,am65
binding (Jan Kiszka)
Xilinx NWL PCIe controller driver:
- Clear bootloader E_ECAM_CONTROL before merging in the new driver
value to avoid writing invalid values (Jani Nurminen)"
* tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (141 commits)
PCI/AER: Avoid NULL pointer dereference in aer_ratelimit()
MAINTAINERS: Add entry for ST STM32MP25 PCIe drivers
PCI: stm32-ep: Add PCIe Endpoint support for STM32MP25
dt-bindings: PCI: Add STM32MP25 PCIe Endpoint bindings
PCI: stm32: Add PCIe host support for STM32MP25
PCI: xilinx-nwl: Fix ECAM programming
PCI: j721e: Fix incorrect error message in probe()
PCI: keystone: Use devm_request_irq() to free "ks-pcie-error-irq" on exit
dt-bindings: PCI: qcom,pcie-x1e80100: Set clocks minItems for the fifth Glymur PCIe Controller
PCI: dwc: Support 16-lane operation
PCI: Add lockdep assertion in pci_stop_and_remove_bus_device()
PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV
PCI: rcar-host: Convert struct rcar_msi mask_lock into raw spinlock
PCI: tegra194: Rename 'root_bus' to 'root_port_bus' in tegra_pcie_downstream_dev_to_D0()
PCI: tegra: Convert struct tegra_msi mask_lock into raw spinlock
PCI: rcar-gen4: Fix inverted break condition in PHY initialization
PCI: rcar-gen4: Assure reset occurs before DBI access
PCI: rcar-gen4: Add missing 1ms delay after PWR reset assertion
PCI: Set up bridge resources earlier
PCI: rcar-host: Drop PMSR spinlock
...
Misc changes:
- Use str_plural() instead of open code for emitting strings.
- Use str_enabled_disabled() instead of ternary operator
- Fix emit of type resource_size_t argument for validate_region_offset()
- Typo fixup in CXL driver-api documentation
- Rename CFMWS coherency restriction defines
- Add convention doc describe dealing with x86 low memory hole and CXL
Poison Inject support series:
- Move hpa_to_spa callback to new reoot decoder ops structure
- Define a SPA to HPA callback for interleave calculation with XOR math
- Add support for SPA to DPA address translation with XOR
- Add locked variants of poison inject and clear functions
- Add inject and clear poison support by region offset
CXL access coordinates update fix series:
- A comment update for hotplug memory callback prority defines
- Add node_update_perf_attrs() for updating perf attrs on a node
- Update cxl_access_coordinates() to use the new node update function
- Remove hmat_update_target_coordinates() and related code
CXL delayed downstream port enumeration and initialization series
- Add helper to detect top of CXL device topology and remove open coding
- Add helper to delete single dport
- Add a cached copy of target_map to cxl_decoder
- Refactor decoder setup to reduce cxl_test burden
- Defer dport allocation for switch ports
- Add mock version of devm_cxl_add_dport_by_dev() for cxl_test
- Adjust the mock version of devm_cxl_switch_port_decoders_setup() due to
cxl core usage
- Setup target_map for cxl_test decoder initialization
- Change SSLBIS handler to handle single dport
- Move port register setup to when first dport appears
-----BEGIN PGP SIGNATURE-----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=VYmp
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dave Jiang:
"The changes include adding poison injection support, fixing CXL access
coordinates when onlining CXL memory, and delaing the enumeration of
downstream switch ports for CXL hierarchy to ensure that the CXL link
is established at the time of enumeration to address a few issues
observed on AMD and Intel platforms.
Misc changes:
- Use str_plural() instead of open code for emitting strings.
- Use str_enabled_disabled() instead of ternary operator
- Fix emit of type resource_size_t argument for
validate_region_offset()
- Typo fixup in CXL driver-api documentation
- Rename CFMWS coherency restriction defines
- Add convention doc describe dealing with x86 low memory hole
and CXL
Poison Inject support:
- Move hpa_to_spa callback to new reoot decoder ops structure
- Define a SPA to HPA callback for interleave calculation with
XOR math
- Add support for SPA to DPA address translation with XOR
- Add locked variants of poison inject and clear functions
- Add inject and clear poison support by region offset
CXL access coordinates update fix:
- A comment update for hotplug memory callback prority defines
- Add node_update_perf_attrs() for updating perf attrs on a node
- Update cxl_access_coordinates() to use the new node update function
- Remove hmat_update_target_coordinates() and related code
CXL delayed downstream port enumeration and initialization:
- Add helper to detect top of CXL device topology and remove
open coding
- Add helper to delete single dport
- Add a cached copy of target_map to cxl_decoder
- Refactor decoder setup to reduce cxl_test burden
- Defer dport allocation for switch ports
- Add mock version of devm_cxl_add_dport_by_dev() for cxl_test
- Adjust the mock version of devm_cxl_switch_port_decoders_setup()
due to cxl core usage
- Setup target_map for cxl_test decoder initialization
- Change SSLBIS handler to handle single dport
- Move port register setup to when first dport appears"
* tag 'cxl-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (25 commits)
cxl: Move port register setup to when first dport appear
cxl: Change sslbis handler to only handle single dport
cxl/test: Setup target_map for cxl_test decoder initialization
cxl/test: Adjust the mock version of devm_cxl_switch_port_decoders_setup()
cxl/test: Add mock version of devm_cxl_add_dport_by_dev()
cxl: Defer dport allocation for switch ports
cxl/test: Refactor decoder setup to reduce cxl_test burden
cxl: Add a cached copy of target_map to cxl_decoder
cxl: Add helper to delete dport
cxl: Add helper to detect top of CXL device topology
cxl: Documentation/driver-api/cxl: Describe the x86 Low Memory Hole solution
cxl/acpi: Rename CFMW coherency restrictions
Documentation/driver-api: Fix typo error in cxl
acpi/hmat: Remove now unused hmat_update_target_coordinates()
cxl, acpi/hmat: Update CXL access coordinates directly instead of through HMAT
drivers/base/node: Add a helper function node_update_perf_attrs()
mm/memory_hotplug: Update comment for hotplug memory callback priorities
cxl: Fix emit of type resource_size_t argument for validate_region_offset()
cxl/region: Add inject and clear poison by region offset
cxl/core: Add locked variants of the poison inject and clear funcs
...
- Bring the kernel memory-model docs into the Sphinx build in the "literal
include" mode.
- Lots of build-infrastructure work, further cleaning up long-term
kernel-doc technical debt. The sphinx-pre-install tool has been
converted to Python and updated for current systems.
- A new tool to detect when documents have been moved and generate HTML
redirects; this can be used on kernel.org (or any other site hosting the
rendered docs) to avoid breaking links.
- Automated processing of the YAML files describing the netlink protocol.
- A significant update of the maintainer's PGP guide.
...and a seemingly endless series of typo fixes, build-problem fixes, etc.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmjbwOoACgkQF0NaE2wM
flis1gf/ZvRi3Mo5hIsuGyQfs5kw/jx0N7SG4QYf2rEnt5ZGNa5SkyOVKsWQKTgK
LesQkdaCA0xHMoUWSvZRwn2a0+acpeMm6viXjewd2mU52sSNmSkKG4WsZyxfnOYS
36fkZ1qymQkJ4uSvx5NScTiIBqZx+Qfgkj0eNnXcpJd2vYeAVSu4szsFxeUvcJFj
Ckq3+3DQ5p/dcWwgvdlLKEJGj98Q3cqLrMn8ycbNtwzo3mdVbrlP5+qqNslZC6xY
Nqpv9HXbFWNCaL6YWCybcNOZ4F5UVno1ap2F3imTD8Rp1iG77zAQV5lMlq4Gksf4
kECLc1TtTKSgmgWHmi1sgudqM4Xqpw==
=Qe3Z
-----END PGP SIGNATURE-----
Merge tag 'docs-6.18' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It has been a relatively busy cycle in docsland, with changes all
over:
- Bring the kernel memory-model docs into the Sphinx build in the
"literal include" mode.
- Lots of build-infrastructure work, further cleaning up long-term
kernel-doc technical debt. The sphinx-pre-install tool has been
converted to Python and updated for current systems.
- A new tool to detect when documents have been moved and generate
HTML redirects; this can be used on kernel.org (or any other site
hosting the rendered docs) to avoid breaking links.
- Automated processing of the YAML files describing the netlink
protocol.
- A significant update of the maintainer's PGP guide.
... and a seemingly endless series of typo fixes, build-problem fixes,
etc"
* tag 'docs-6.18' of git://git.lwn.net/linux: (193 commits)
Documentation/features: Update feature lists for 6.17-rc7
docs: remove cdomain.py
Documentation/process: submitting-patches: fix typo in "were do"
docs: dev-tools/lkmm: Fix typo of missing file extension
Documentation: trace: histogram: Convert ftrace docs cross-reference
Documentation: trace: histogram-design: Wrap introductory note in note:: directive
Documentation: trace: historgram-design: Separate sched_waking histogram section heading and the following diagram
Documentation: trace: histogram-design: Trim trailing vertices in diagram explanation text
Documentation: trace: histogram: Fix histogram trigger subsection number order
docs: driver-api: fix spelling of "buses".
Documentation: fbcon: Use admonition directives
Documentation: fbcon: Reindent 8th step of attach/detach/unload
Documentation: fbcon: Add boot options and attach/detach/unload section headings
docs: filesystems: sysfs: add remaining top level sysfs directory descriptions
docs: filesystems: sysfs: clarify symlink destinations in dev and bus/devices descriptions
docs: filesystems: sysfs: remove top level sysfs net directory
docs: maintainer: Fix ambiguous subheading formatting
docs: kdoc: a few more dump_typedef() tweaks
docs: kdoc: remove redundant comment stripping in dump_typedef()
docs: kdoc: remove some dead code in dump_typedef()
...
- The 3 patch series "mm, swap: improve cluster scan strategy" from
Kairui Song improves performance and reduces the failure rate of swap
cluster allocation.
- The 4 patch series "support large align and nid in Rust allocators"
from Vitaly Wool permits Rust allocators to set NUMA node and large
alignment when perforning slub and vmalloc reallocs.
- The 2 patch series "mm/damon/vaddr: support stat-purpose DAMOS" from
Yueyang Pan extend DAMOS_STAT's handling of the DAMON operations sets
for virtual address spaces for ops-level DAMOS filters.
- The 3 patch series "execute PROCMAP_QUERY ioctl under per-vma lock"
from Suren Baghdasaryan reduces mmap_lock contention during reads of
/proc/pid/maps.
- The 2 patch series "mm/mincore: minor clean up for swap cache
checking" from Kairui Song performs some cleanup in the swap code.
- The 11 patch series "mm: vm_normal_page*() improvements" from David
Hildenbrand provides code cleanup in the pagemap code.
- The 5 patch series "add persistent huge zero folio support" from
Pankaj Raghav provides a block layer speedup by optionalls making the
huge_zero_pagepersistent, instead of releasing it when its refcount
falls to zero.
- The 3 patch series "kho: fixes and cleanups" from Mike Rapoport adds a
few touchups to the recently added Kexec Handover feature.
- The 10 patch series "mm: make mm->flags a bitmap and 64-bit on all
arches" from Lorenzo Stoakes turns mm_struct.flags into a bitmap. To
end the constant struggle with space shortage on 32-bit conflicting with
64-bit's needs.
- The 2 patch series "mm/swapfile.c and swap.h cleanup" from Chris Li
cleans up some swap code.
- The 7 patch series "selftests/mm: Fix false positives and skip
unsupported tests" from Donet Tom fixes a few things in our selftests
code.
- The 7 patch series "prctl: extend PR_SET_THP_DISABLE to only provide
THPs when advised" from David Hildenbrand "allows individual processes
to opt-out of THP=always into THP=madvise, without affecting other
workloads on the system".
It's a long story - the [1/N] changelog spells out the considerations.
- The 11 patch series "Add and use memdesc_flags_t" from Matthew Wilcox
gets us started on the memdesc project. Please see
https://kernelnewbies.org/MatthewWilcox/Memdescs and
https://blogs.oracle.com/linux/post/introducing-memdesc.
- The 3 patch series "Tiny optimization for large read operations" from
Chi Zhiling improves the efficiency of the pagecache read path.
- The 5 patch series "Better split_huge_page_test result check" from Zi
Yan improves our folio splitting selftest code.
- The 2 patch series "test that rmap behaves as expected" from Wei Yang
adds some rmap selftests.
- The 3 patch series "remove write_cache_pages()" from Christoph Hellwig
removes that function and converts its two remaining callers.
- The 2 patch series "selftests/mm: uffd-stress fixes" from Dev Jain
fixes some UFFD selftests issues.
- The 3 patch series "introduce kernel file mapped folios" from Boris
Burkov introduces the concept of "kernel file pages". Using these
permits btrfs to account its metadata pages to the root cgroup, rather
than to the cgroups of random inappropriate tasks.
- The 2 patch series "mm/pageblock: improve readability of some
pageblock handling" from Wei Yang provides some readability improvements
to the page allocator code.
- The 11 patch series "mm/damon: support ARM32 with LPAE" from SeongJae
Park teaches DAMON to understand arm32 highmem.
- The 4 patch series "tools: testing: Use existing atomic.h for
vma/maple tests" from Brendan Jackman performs some code cleanups and
deduplication under tools/testing/.
- The 2 patch series "maple_tree: Fix testing for 32bit compiles" from
Liam Howlett fixes a couple of 32-bit issues in
tools/testing/radix-tree.c.
- The 2 patch series "kasan: unify kasan_enabled() and remove
arch-specific implementations" from Sabyrzhan Tasbolatov moves KASAN
arch-specific initialization code into a common arch-neutral
implementation.
- The 3 patch series "mm: remove zpool" from Johannes Weiner removes
zspool - an indirection layer which now only redirects to a single thing
(zsmalloc).
- The 2 patch series "mm: task_stack: Stack handling cleanups" from
Pasha Tatashin makes a couple of cleanups in the fork code.
- The 37 patch series "mm: remove nth_page()" from David Hildenbrand
makes rather a lot of adjustments at various nth_page() callsites,
eventually permitting the removal of that undesirable helper function.
- The 2 patch series "introduce kasan.write_only option in hw-tags" from
Yeoreum Yun creates a KASAN read-only mode for ARM, using that
architecture's memory tagging feature. It is felt that a read-only mode
KASAN is suitable for use in production systems rather than debug-only.
- The 3 patch series "mm: hugetlb: cleanup hugetlb folio allocation"
from Kefeng Wang does some tidying in the hugetlb folio allocation code.
- The 12 patch series "mm: establish const-correctness for pointer
parameters" from Max Kellermann makes quite a number of the MM API
functions more accurate about the constness of their arguments. This
was getting in the way of subsystems (in this case CEPH) when they
attempt to improving their own const/non-const accuracy.
- The 7 patch series "Cleanup free_pages() misuse" from Vishal Moola
fixes a number of code sites which were confused over when to use
free_pages() vs __free_pages().
- The 3 patch series "Add Rust abstraction for Maple Trees" from Alice
Ryhl makes the mapletree code accessible to Rust. Required by nouveau
and by its forthcoming successor: the new Rust Nova driver.
- The 2 patch series "selftests/mm: split_huge_page_test:
split_pte_mapped_thp improvements" from David Hildenbrand adds a fix and
some cleanups to the thp selftesting code.
- The 14 patch series "mm, swap: introduce swap table as swap cache
(phase I)" from Chris Li and Kairui Song is the first step along the
path to implementing "swap tables" - a new approach to swap allocation
and state tracking which is expected to yield speed and space
improvements. This patchset itself yields a 5-20% performance benefit
in some situations.
- The 3 patch series "Some ptdesc cleanups" from Matthew Wilcox utilizes
the new memdesc layer to clean up the ptdesc code a little.
- The 3 patch series "Fix va_high_addr_switch.sh test failure" from
Chunyu Hu fixes some issues in our 5-level pagetable selftesting code.
- The 2 patch series "Minor fixes for memory allocation profiling" from
Suren Baghdasaryan addresses a couple of minor issues in relatively new
memory allocation profiling feature.
- The 3 patch series "Small cleanups" from Matthew Wilcox has a few
cleanups in preparation for more memdesc work.
- The 2 patch series "mm/damon: add addr_unit for DAMON_LRU_SORT and
DAMON_RECLAIM" from Quanmin Yan makes some changes to DAMON in
furtherance of supporting arm highmem.
- The 2 patch series "selftests/mm: Add -Wunreachable-code and fix
warnings" from Muhammad Anjum adds that compiler check to selftests code
and fixes the fallout, by removing dead code.
- The 10 patch series "Improvements to Victim Process Thawing and OOM
Reaper Traversal Order" from zhongjinji makes a number of improvements
in the OOM killer: mainly thawing a more appropriate group of victim
threads so they can release resources.
- The 5 patch series "mm/damon: misc fixups and improvements for 6.18"
from SeongJae Park is a bunch of small and unrelated fixups for DAMON.
- The 7 patch series "mm/damon: define and use DAMON initialization
check function" from SeongJae Park implement reliability and
maintainability improvements to a recently-added bug fix.
- The 2 patch series "mm/damon/stat: expose auto-tuned intervals and
non-idle ages" from SeongJae Park provides additional transparency to
userspace clients of the DAMON_STAT information.
- The 2 patch series "Expand scope of khugepaged anonymous collapse"
from Dev Jain removes some constraints on khubepaged's collapsing of
anon VMAs. It also increases the success rate of MADV_COLLAPSE against
an anon vma.
- The 2 patch series "mm: do not assume file == vma->vm_file in
compat_vma_mmap_prepare()" from Lorenzo Stoakes moves us further towards
removal of file_operations.mmap(). This patchset concentrates upon
clearing up the treatment of stacked filesystems.
- The 6 patch series "mm: Improve mlock tracking for large folios" from
Kiryl Shutsemau provides some fixes and improvements to mlock's tracking
of large folios. /proc/meminfo's "Mlocked" field became more accurate.
- The 2 patch series "mm/ksm: Fix incorrect accounting of KSM counters
during fork" from Donet Tom fixes several user-visible KSM stats
inaccuracies across forks and adds selftest code to verify these
counters.
- The 2 patch series "mm_slot: fix the usage of mm_slot_entry" from Wei
Yang addresses some potential but presently benign issues in KSM's
mm_slot handling.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaN3cywAKCRDdBJ7gKXxA
jtaPAQDmIuIu7+XnVUK5V11hsQ/5QtsUeLHV3OsAn4yW5/3dEQD/UddRU08ePN+1
2VRB0EwkLAdfMWW7TfiNZ+yhuoiL/AA=
=4mhY
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "mm, swap: improve cluster scan strategy" from Kairui Song improves
performance and reduces the failure rate of swap cluster allocation
- "support large align and nid in Rust allocators" from Vitaly Wool
permits Rust allocators to set NUMA node and large alignment when
perforning slub and vmalloc reallocs
- "mm/damon/vaddr: support stat-purpose DAMOS" from Yueyang Pan extend
DAMOS_STAT's handling of the DAMON operations sets for virtual
address spaces for ops-level DAMOS filters
- "execute PROCMAP_QUERY ioctl under per-vma lock" from Suren
Baghdasaryan reduces mmap_lock contention during reads of
/proc/pid/maps
- "mm/mincore: minor clean up for swap cache checking" from Kairui Song
performs some cleanup in the swap code
- "mm: vm_normal_page*() improvements" from David Hildenbrand provides
code cleanup in the pagemap code
- "add persistent huge zero folio support" from Pankaj Raghav provides
a block layer speedup by optionalls making the
huge_zero_pagepersistent, instead of releasing it when its refcount
falls to zero
- "kho: fixes and cleanups" from Mike Rapoport adds a few touchups to
the recently added Kexec Handover feature
- "mm: make mm->flags a bitmap and 64-bit on all arches" from Lorenzo
Stoakes turns mm_struct.flags into a bitmap. To end the constant
struggle with space shortage on 32-bit conflicting with 64-bit's
needs
- "mm/swapfile.c and swap.h cleanup" from Chris Li cleans up some swap
code
- "selftests/mm: Fix false positives and skip unsupported tests" from
Donet Tom fixes a few things in our selftests code
- "prctl: extend PR_SET_THP_DISABLE to only provide THPs when advised"
from David Hildenbrand "allows individual processes to opt-out of
THP=always into THP=madvise, without affecting other workloads on the
system".
It's a long story - the [1/N] changelog spells out the considerations
- "Add and use memdesc_flags_t" from Matthew Wilcox gets us started on
the memdesc project. Please see
https://kernelnewbies.org/MatthewWilcox/Memdescs and
https://blogs.oracle.com/linux/post/introducing-memdesc
- "Tiny optimization for large read operations" from Chi Zhiling
improves the efficiency of the pagecache read path
- "Better split_huge_page_test result check" from Zi Yan improves our
folio splitting selftest code
- "test that rmap behaves as expected" from Wei Yang adds some rmap
selftests
- "remove write_cache_pages()" from Christoph Hellwig removes that
function and converts its two remaining callers
- "selftests/mm: uffd-stress fixes" from Dev Jain fixes some UFFD
selftests issues
- "introduce kernel file mapped folios" from Boris Burkov introduces
the concept of "kernel file pages". Using these permits btrfs to
account its metadata pages to the root cgroup, rather than to the
cgroups of random inappropriate tasks
- "mm/pageblock: improve readability of some pageblock handling" from
Wei Yang provides some readability improvements to the page allocator
code
- "mm/damon: support ARM32 with LPAE" from SeongJae Park teaches DAMON
to understand arm32 highmem
- "tools: testing: Use existing atomic.h for vma/maple tests" from
Brendan Jackman performs some code cleanups and deduplication under
tools/testing/
- "maple_tree: Fix testing for 32bit compiles" from Liam Howlett fixes
a couple of 32-bit issues in tools/testing/radix-tree.c
- "kasan: unify kasan_enabled() and remove arch-specific
implementations" from Sabyrzhan Tasbolatov moves KASAN arch-specific
initialization code into a common arch-neutral implementation
- "mm: remove zpool" from Johannes Weiner removes zspool - an
indirection layer which now only redirects to a single thing
(zsmalloc)
- "mm: task_stack: Stack handling cleanups" from Pasha Tatashin makes a
couple of cleanups in the fork code
- "mm: remove nth_page()" from David Hildenbrand makes rather a lot of
adjustments at various nth_page() callsites, eventually permitting
the removal of that undesirable helper function
- "introduce kasan.write_only option in hw-tags" from Yeoreum Yun
creates a KASAN read-only mode for ARM, using that architecture's
memory tagging feature. It is felt that a read-only mode KASAN is
suitable for use in production systems rather than debug-only
- "mm: hugetlb: cleanup hugetlb folio allocation" from Kefeng Wang does
some tidying in the hugetlb folio allocation code
- "mm: establish const-correctness for pointer parameters" from Max
Kellermann makes quite a number of the MM API functions more accurate
about the constness of their arguments. This was getting in the way
of subsystems (in this case CEPH) when they attempt to improving
their own const/non-const accuracy
- "Cleanup free_pages() misuse" from Vishal Moola fixes a number of
code sites which were confused over when to use free_pages() vs
__free_pages()
- "Add Rust abstraction for Maple Trees" from Alice Ryhl makes the
mapletree code accessible to Rust. Required by nouveau and by its
forthcoming successor: the new Rust Nova driver
- "selftests/mm: split_huge_page_test: split_pte_mapped_thp
improvements" from David Hildenbrand adds a fix and some cleanups to
the thp selftesting code
- "mm, swap: introduce swap table as swap cache (phase I)" from Chris
Li and Kairui Song is the first step along the path to implementing
"swap tables" - a new approach to swap allocation and state tracking
which is expected to yield speed and space improvements. This
patchset itself yields a 5-20% performance benefit in some situations
- "Some ptdesc cleanups" from Matthew Wilcox utilizes the new memdesc
layer to clean up the ptdesc code a little
- "Fix va_high_addr_switch.sh test failure" from Chunyu Hu fixes some
issues in our 5-level pagetable selftesting code
- "Minor fixes for memory allocation profiling" from Suren Baghdasaryan
addresses a couple of minor issues in relatively new memory
allocation profiling feature
- "Small cleanups" from Matthew Wilcox has a few cleanups in
preparation for more memdesc work
- "mm/damon: add addr_unit for DAMON_LRU_SORT and DAMON_RECLAIM" from
Quanmin Yan makes some changes to DAMON in furtherance of supporting
arm highmem
- "selftests/mm: Add -Wunreachable-code and fix warnings" from Muhammad
Anjum adds that compiler check to selftests code and fixes the
fallout, by removing dead code
- "Improvements to Victim Process Thawing and OOM Reaper Traversal
Order" from zhongjinji makes a number of improvements in the OOM
killer: mainly thawing a more appropriate group of victim threads so
they can release resources
- "mm/damon: misc fixups and improvements for 6.18" from SeongJae Park
is a bunch of small and unrelated fixups for DAMON
- "mm/damon: define and use DAMON initialization check function" from
SeongJae Park implement reliability and maintainability improvements
to a recently-added bug fix
- "mm/damon/stat: expose auto-tuned intervals and non-idle ages" from
SeongJae Park provides additional transparency to userspace clients
of the DAMON_STAT information
- "Expand scope of khugepaged anonymous collapse" from Dev Jain removes
some constraints on khubepaged's collapsing of anon VMAs. It also
increases the success rate of MADV_COLLAPSE against an anon vma
- "mm: do not assume file == vma->vm_file in compat_vma_mmap_prepare()"
from Lorenzo Stoakes moves us further towards removal of
file_operations.mmap(). This patchset concentrates upon clearing up
the treatment of stacked filesystems
- "mm: Improve mlock tracking for large folios" from Kiryl Shutsemau
provides some fixes and improvements to mlock's tracking of large
folios. /proc/meminfo's "Mlocked" field became more accurate
- "mm/ksm: Fix incorrect accounting of KSM counters during fork" from
Donet Tom fixes several user-visible KSM stats inaccuracies across
forks and adds selftest code to verify these counters
- "mm_slot: fix the usage of mm_slot_entry" from Wei Yang addresses
some potential but presently benign issues in KSM's mm_slot handling
* tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (372 commits)
mm: swap: check for stable address space before operating on the VMA
mm: convert folio_page() back to a macro
mm/khugepaged: use start_addr/addr for improved readability
hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list
alloc_tag: fix boot failure due to NULL pointer dereference
mm: silence data-race in update_hiwater_rss
mm/memory-failure: don't select MEMORY_ISOLATION
mm/khugepaged: remove definition of struct khugepaged_mm_slot
mm/ksm: get mm_slot by mm_slot_entry() when slot is !NULL
hugetlb: increase number of reserving hugepages via cmdline
selftests/mm: add fork inheritance test for ksm_merging_pages counter
mm/ksm: fix incorrect KSM counter handling in mm_struct during fork
drivers/base/node: fix double free in register_one_node()
mm: remove PMD alignment constraint in execmem_vmalloc()
mm/memory_hotplug: fix typo 'esecially' -> 'especially'
mm/rmap: improve mlock tracking for large folios
mm/filemap: map entire large folio faultaround
mm/fault: try to map the entire file folio in finish_fault()
mm/rmap: mlock large folios in try_to_unmap_one()
mm/rmap: fix a mlock race condition in folio_referenced_one()
...
Core & protocols
----------------
- Improve drop account scalability on NUMA hosts for RAW and UDP sockets
and the backlog, almost doubling the Pps capacity under DoS.
- Optimize the UDP RX performance under stress, reducing contention,
revisiting the binary layout of the involved data structs and
implementing NUMA-aware locking. This improves UDP RX performance by
an additional 50%, even more under extreme conditions.
- Add support for PSP encryption of TCP connections; this mechanism has
some similarities with IPsec and TLS, but offers superior HW offloads
capabilities.
- Ongoing work to support Accurate ECN for TCP. AccECN allows more than
one congestion notification signal per RTT and is a building block for
Low Latency, Low Loss, and Scalable Throughput (L4S).
- Reorganize the TCP socket binary layout for data locality, reducing
the number of touched cachelines in the fastpath.
- Refactor skb deferral free to better scale on large multi-NUMA hosts,
this improves TCP and UDP RX performances significantly on such HW.
- Increase the default socket memory buffer limits from 256K to 4M to
better fit modern link speeds.
- Improve handling of setups with a large number of nexthop, making dump
operating scaling linearly and avoiding unneeded synchronize_rcu() on
delete.
- Improve bridge handling of VLAN FDB, storing a single entry per bridge
instead of one entry per port; this makes the dump order of magnitude
faster on large switches.
- Restore IP ID correctly for encapsulated packets at GSO segmentation
time, allowing GRO to merge packets in more scenarios.
- Improve netfilter matching performance on large sets.
- Improve MPTCP receive path performance by leveraging recently
introduced core infrastructure (skb deferral free) and adopting recent
TCP autotuning changes.
- Allow bridges to redirect to a backup port when the bridge port is
administratively down.
- Introduce MPTCP 'laminar' endpoint that con be used only once per
connection and simplify common MPTCP setups.
- Add RCU safety to dst->dev, closing a lot of possible races.
- A significant crypto library API for SCTP, MPTCP and IPv6 SR, reducing
code duplication.
- Supports pulling data from an skb frag into the linear area of an XDP
buffer.
Things we sprinkled into general kernel code
--------------------------------------------
- Generate netlink documentation from YAML using an integrated
YAML parser.
Driver API
----------
- Support using IPv6 Flow Label in Rx hash computation and RSS queue
selection.
- Introduce API for fetching the DMA device for a given queue, allowing
TCP zerocopy RX on more H/W setups.
- Make XDP helpers compatible with unreadable memory, allowing more
easily building DevMem-enabled drivers with a unified XDP/skbs
datapath.
- Add a new dedicated ethtool callback enabling drivers to provide the
number of RX rings directly, improving efficiency and clarity in RX
ring queries and RSS configuration.
- Introduce a burst period for the health reporter, allowing better
handling of multiple errors due to the same root cause.
- Support for DPLL phase offset exponential moving average, controlling
the average smoothing factor.
Device drivers
--------------
- Add a new Huawei driver for 3rd gen NIC (hinic3).
- Add a new SpacemiT driver for K1 ethernet MAC.
- Add a generic abstraction for shared memory communication devices
(dibps)
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- Use multiple per-queue doorbell, to avoid MMIO contention issues
- support adjacent functions, allowing them to delegate their
SR-IOV VFs to sibling PFs
- support RSS for IPSec offload
- support exposing raw cycle counters in PTP and mlx5
- support for disabling host PFs.
- Intel (100G, ice, idpf):
- ice: support for SRIOV VFs over an Active-Active link aggregate
- ice: support for firmware logging via debugfs
- ice: support for Earliest TxTime First (ETF) hardware offload
- idpf: support basic XDP functionalities and XSk
- Broadcom (bnxt):
- support Hyper-V VF ID
- dynamic SRIOV resource allocations for RoCE
- Meta (fbnic):
- support queue API, zero-copy Rx and Tx
- support basic XDP functionalities
- devlink health support for FW crashes and OTP mem corruptions
- expand hardware stats coverage to FEC, PHY, and Pause
- Wangxun:
- support ethtool coalesce options
- support for multiple RSS contexts
- Ethernet virtual:
- Macsec:
- replace custom netlink attribute checks with policy-level checks
- Bonding:
- support aggregator selection based on port priority
- Microsoft vNIC:
- use page pool fragments for RX buffers instead of full pages to
improve memory efficiency
- Ethernet NICs consumer, and embedded:
- Qualcomm: support Ethernet function for IPQ9574 SoC
- Airoha: implement wlan offloading via NPU
- Freescale
- enetc: add NETC timer PTP driver and add PTP support
- fec: enable the Jumbo frame support for i.MX8QM
- Renesas (R-Car S4): support HW offloading for layer 2 switching
- support for RZ/{T2H, N2H} SoCs
- Cadence (macb): support TAPRIO traffic scheduling
- TI:
- support for Gigabit ICSS ethernet SoC (icssm-prueth)
- Synopsys (stmmac): a lot of cleanups
- Ethernet PHYs:
- Support 10g-qxgmi phy-mode for AQR412C, Felix DSA and Lynx PCS
driver
- Support bcm63268 GPHY power control
- Support for Micrel lan8842 PHY and PTP
- Support for Aquantia AQR412 and AQR115
- CAN:
- a large CAN-XL preparation work
- reorganize raw_sock and uniqframe struct to minimize memory usage
- rcar_canfd: update the CAN-FD handling
- WiFi:
- extended Neighbor Awareness Networking (NAN) support
- S1G channel representation cleanup
- improve S1G support
- WiFi drivers:
- Intel (iwlwifi):
- major refactor and cleanup
- Broadcom (brcm80211):
- support for AP isolation
- RealTek (rtw88/89) rtw88/89:
- preparation work for RTL8922DE support
- MediaTek (mt76):
- HW restart improvements
- MLO support
- Qualcomm/Atheros (ath10k_
- GTK rekey fixes
- Bluetooth drivers:
- btusb: support for several new IDs for MT7925
- btintel: support for BlazarIW core
- btintel_pcie: support for _suspend() / _resume()
- btintel_pcie: support for Scorpious, Panther Lake-H484 IDs
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=w2Kz
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core & protocols:
- Improve drop account scalability on NUMA hosts for RAW and UDP
sockets and the backlog, almost doubling the Pps capacity under DoS
- Optimize the UDP RX performance under stress, reducing contention,
revisiting the binary layout of the involved data structs and
implementing NUMA-aware locking. This improves UDP RX performance
by an additional 50%, even more under extreme conditions
- Add support for PSP encryption of TCP connections; this mechanism
has some similarities with IPsec and TLS, but offers superior HW
offloads capabilities
- Ongoing work to support Accurate ECN for TCP. AccECN allows more
than one congestion notification signal per RTT and is a building
block for Low Latency, Low Loss, and Scalable Throughput (L4S)
- Reorganize the TCP socket binary layout for data locality, reducing
the number of touched cachelines in the fastpath
- Refactor skb deferral free to better scale on large multi-NUMA
hosts, this improves TCP and UDP RX performances significantly on
such HW
- Increase the default socket memory buffer limits from 256K to 4M to
better fit modern link speeds
- Improve handling of setups with a large number of nexthop, making
dump operating scaling linearly and avoiding unneeded
synchronize_rcu() on delete
- Improve bridge handling of VLAN FDB, storing a single entry per
bridge instead of one entry per port; this makes the dump order of
magnitude faster on large switches
- Restore IP ID correctly for encapsulated packets at GSO
segmentation time, allowing GRO to merge packets in more scenarios
- Improve netfilter matching performance on large sets
- Improve MPTCP receive path performance by leveraging recently
introduced core infrastructure (skb deferral free) and adopting
recent TCP autotuning changes
- Allow bridges to redirect to a backup port when the bridge port is
administratively down
- Introduce MPTCP 'laminar' endpoint that con be used only once per
connection and simplify common MPTCP setups
- Add RCU safety to dst->dev, closing a lot of possible races
- A significant crypto library API for SCTP, MPTCP and IPv6 SR,
reducing code duplication
- Supports pulling data from an skb frag into the linear area of an
XDP buffer
Things we sprinkled into general kernel code:
- Generate netlink documentation from YAML using an integrated YAML
parser
Driver API:
- Support using IPv6 Flow Label in Rx hash computation and RSS queue
selection
- Introduce API for fetching the DMA device for a given queue,
allowing TCP zerocopy RX on more H/W setups
- Make XDP helpers compatible with unreadable memory, allowing more
easily building DevMem-enabled drivers with a unified XDP/skbs
datapath
- Add a new dedicated ethtool callback enabling drivers to provide
the number of RX rings directly, improving efficiency and clarity
in RX ring queries and RSS configuration
- Introduce a burst period for the health reporter, allowing better
handling of multiple errors due to the same root cause
- Support for DPLL phase offset exponential moving average,
controlling the average smoothing factor
Device drivers:
- Add a new Huawei driver for 3rd gen NIC (hinic3)
- Add a new SpacemiT driver for K1 ethernet MAC
- Add a generic abstraction for shared memory communication
devices (dibps)
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- Use multiple per-queue doorbell, to avoid MMIO contention
issues
- support adjacent functions, allowing them to delegate their
SR-IOV VFs to sibling PFs
- support RSS for IPSec offload
- support exposing raw cycle counters in PTP and mlx5
- support for disabling host PFs.
- Intel (100G, ice, idpf):
- ice: support for SRIOV VFs over an Active-Active link
aggregate
- ice: support for firmware logging via debugfs
- ice: support for Earliest TxTime First (ETF) hardware offload
- idpf: support basic XDP functionalities and XSk
- Broadcom (bnxt):
- support Hyper-V VF ID
- dynamic SRIOV resource allocations for RoCE
- Meta (fbnic):
- support queue API, zero-copy Rx and Tx
- support basic XDP functionalities
- devlink health support for FW crashes and OTP mem corruptions
- expand hardware stats coverage to FEC, PHY, and Pause
- Wangxun:
- support ethtool coalesce options
- support for multiple RSS contexts
- Ethernet virtual:
- Macsec:
- replace custom netlink attribute checks with policy-level
checks
- Bonding:
- support aggregator selection based on port priority
- Microsoft vNIC:
- use page pool fragments for RX buffers instead of full pages
to improve memory efficiency
- Ethernet NICs consumer, and embedded:
- Qualcomm: support Ethernet function for IPQ9574 SoC
- Airoha: implement wlan offloading via NPU
- Freescale
- enetc: add NETC timer PTP driver and add PTP support
- fec: enable the Jumbo frame support for i.MX8QM
- Renesas (R-Car S4):
- support HW offloading for layer 2 switching
- support for RZ/{T2H, N2H} SoCs
- Cadence (macb): support TAPRIO traffic scheduling
- TI:
- support for Gigabit ICSS ethernet SoC (icssm-prueth)
- Synopsys (stmmac): a lot of cleanups
- Ethernet PHYs:
- Support 10g-qxgmi phy-mode for AQR412C, Felix DSA and Lynx PCS
driver
- Support bcm63268 GPHY power control
- Support for Micrel lan8842 PHY and PTP
- Support for Aquantia AQR412 and AQR115
- CAN:
- a large CAN-XL preparation work
- reorganize raw_sock and uniqframe struct to minimize memory
usage
- rcar_canfd: update the CAN-FD handling
- WiFi:
- extended Neighbor Awareness Networking (NAN) support
- S1G channel representation cleanup
- improve S1G support
- WiFi drivers:
- Intel (iwlwifi):
- major refactor and cleanup
- Broadcom (brcm80211):
- support for AP isolation
- RealTek (rtw88/89) rtw88/89:
- preparation work for RTL8922DE support
- MediaTek (mt76):
- HW restart improvements
- MLO support
- Qualcomm/Atheros (ath10k):
- GTK rekey fixes
- Bluetooth drivers:
- btusb: support for several new IDs for MT7925
- btintel: support for BlazarIW core
- btintel_pcie: support for _suspend() / _resume()
- btintel_pcie: support for Scorpious, Panther Lake-H484 IDs"
* tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1536 commits)
net: stmmac: Add support for Allwinner A523 GMAC200
dt-bindings: net: sun8i-emac: Add A523 GMAC200 compatible
Revert "Documentation: net: add flow control guide and document ethtool API"
octeontx2-pf: fix bitmap leak
octeontx2-vf: fix bitmap leak
net/mlx5e: Use extack in set rxfh callback
net/mlx5e: Introduce mlx5e_rss_params for RSS configuration
net/mlx5e: Introduce mlx5e_rss_init_params
net/mlx5e: Remove unused mdev param from RSS indir init
net/mlx5: Improve QoS error messages with actual depth values
net/mlx5e: Prevent entering switchdev mode with inconsistent netns
net/mlx5: HWS, Generalize complex matchers
net/mlx5: Improve write-combining test reliability for ARM64 Grace CPUs
selftests/net: add tcp_port_share to .gitignore
Revert "net/mlx5e: Update and set Xon/Xoff upon MTU set"
net: add NUMA awareness to skb_attempt_defer_free()
net: use llist for sd->defer_list
net: make softnet_data.defer_count an atomic
selftests: drv-net: psp: add tests for destroying devices
selftests: drv-net: psp: add test for auto-adjusting TCP MSS
...
-----BEGIN PGP SIGNATURE-----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=Fuey
-----END PGP SIGNATURE-----
Merge tag 'media/v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Added a new V4L2 clock helper
- New camera sensor drivers
- iris: Enable H.264/H.265 encoder support and fixes in iris driver
common code
- camss: add support for new SoC flavors
- venus: add new SoC support
- tc358743: support more infoframe types
- Various fixes, driver improvements and cleanups
* tag 'media/v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (439 commits)
media: venus: pm_helpers: add fallback for the opp-table
media: qcom: camss: vfe: Fix BPL alignment for QCM2290
media: tuner: xc5000: Fix use-after-free in xc5000_release
media: i2c: tc358743: Fix use-after-free bugs caused by orphan timer in probe
media: b2c2: Fix use-after-free causing by irq_check_work in flexcop_pci_remove
media: vsp1: Export missing vsp1_isp_free_buffer symbol
media: renesas: vsp1: Convert to SYSTEM_SLEEP/RUNTIME_PM_OPS()
media: renesas: ceu: Convert to RUNTIME_PM_OPS()
media: renesas: fdp1: Convert to RUNTIME_PM_OPS()
media: renesas: rcar-vin: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
media: renesas: rcar_drif: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
media: uvcvideo: Mark invalid entities with id UVC_INVALID_ENTITY_ID
media: uvcvideo: Support UVC_CROSXU_CONTROL_IQ_PROFILE
media: uvcvideo: Run uvc_ctrl_init_ctrl for all controls
media: uvcvideo: Shorten the transfer size non compliance message
media: uvcvideo: Do not re-reference dev->udev
media: uvcvideo: Use intf instead of udev for printks
media: uvcvideo: Move video_device under video_queue
media: uvcvideo: Drop stream->mutex
media: uvcvideo: Move MSXU_CONTROL_METADATA definition to header
...
- Extend modules.builtin.modinfo to include module aliases from
MODULE_DEVICE_TABLE for builtin modules so that userspace tools (such
as kmod) can verify that a particular module alias will be handled by
a builtin module.
- Bump the minimum version of LLVM for building the kernel to 15.0.0.
- Upgrade several userspace API checks in headers_check.pl to errors.
- Unify and consolidate CONFIG_WERROR / W=e handling.
- Turn assembler and linker warnings into errors with CONFIG_WERROR /
W=e.
- Respect CONFIG_WERROR / W=e when building userspace programs
(userprogs).
- Enable -Werror unconditionally when building host programs
(hostprogs).
- Support copy_file_range() and data segment alignment in gen_init_cpio
to improve performance on filesystems that support reflinks such as
btrfs and XFS.
- Miscellaneous small changes to scripts and configuration files.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR74yXHMTGczQHYypIdayaRccAalgUCaNrp6QAKCRAdayaRccAa
ljxRAP4hYocKXeWsiJzkTB199P4QUGWf220a9elBmtdJEed07gD/VBnCbSOxG3RO
vS8qbJHwxUFL7a+mDV8RIVXSt99NpAg=
=psG/
-----END PGP SIGNATURE-----
Merge tag 'kbuild-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild updates from Nathan Chancellor:
- Extend modules.builtin.modinfo to include module aliases from
MODULE_DEVICE_TABLE for builtin modules so that userspace tools (such
as kmod) can verify that a particular module alias will be handled by
a builtin module
- Bump the minimum version of LLVM for building the kernel to 15.0.0
- Upgrade several userspace API checks in headers_check.pl to errors
- Unify and consolidate CONFIG_WERROR / W=e handling
- Turn assembler and linker warnings into errors with CONFIG_WERROR /
W=e
- Respect CONFIG_WERROR / W=e when building userspace programs
(userprogs)
- Enable -Werror unconditionally when building host programs
(hostprogs)
- Support copy_file_range() and data segment alignment in gen_init_cpio
to improve performance on filesystems that support reflinks such as
btrfs and XFS
- Miscellaneous small changes to scripts and configuration files
* tag 'kbuild-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux: (47 commits)
modpost: Initialize builtin_modname to stop SIGSEGVs
Documentation: kbuild: note CONFIG_DEBUG_EFI in reproducible builds
kbuild: vmlinux.unstripped should always depend on .vmlinux.export.o
modpost: Create modalias for builtin modules
modpost: Add modname to mod_device_table alias
scsi: Always define blogic_pci_tbl structure
kbuild: extract modules.builtin.modinfo from vmlinux.unstripped
kbuild: keep .modinfo section in vmlinux.unstripped
kbuild: always create intermediate vmlinux.unstripped
s390: vmlinux.lds.S: Reorder sections
KMSAN: Remove tautological checks
objtool: Drop noinstr hack for KCSAN_WEAK_MEMORY
lib/Kconfig.debug: Drop CLANG_VERSION check from DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT
riscv: Remove ld.lld version checks from many TOOLCHAIN_HAS configs
riscv: Unconditionally use linker relaxation
riscv: Remove version check for LTO_CLANG selects
powerpc: Drop unnecessary initializations in __copy_inst_from_kernel_nofault()
mips: Unconditionally select ARCH_HAS_CURRENT_STACK_POINTER
arm64: Remove tautological LLVM Kconfig conditions
ARM: Clean up definition of ARM_HAS_GROUP_RELOCS
...
Core changes:
- Allow pins to be identified/marked as GPIO mode with
a special callback. The pin controller core is now
"aware" if a pin is in GPIO mode if the callback is
implemented in the driver, and can thus be marked
as "strict", i.e. disallowing simultaneous use of a
line as GPIO and another function such as I2C. This
is enabled in the Qualcomm TLMM driver and also
implemeted from day 1 in the new Broadcom STB driver.
- Rename the pin config option PIN_CONFIG_OUTPUT to
PIN_CONFIG_LEVEL to better describe what the config is
doing, as well as making it more intuitive what shall
be returned when reading this property.
New drivers:
- Qualcomm SDM660 LPASS LPI TLMM pin controller subdriver.
- Qualcomm Glymur family pin controller driver.
- Broadcom STB family pin controller driver.
- Tegra186 pin controller driver.
- AAEON UP pin controller support. This is some special
pin controller that works as an external advanced line
MUX and amplifier for signals from an Intel SoC.
A cooperative effort with the GPIO maintainer was
needed to reach a solution where we reuse code from
the GPIO aggregator/forwarder driver.
- Renesas RZ/T2H and RZ/N2H pin controller support.
- Axis ARTPEC-8 subdriver for the Samsung pin controller
driver.
Improvements:
- Output enable (OEN) support in the Renesas RZG2L driver.
- Properly support bias pull up/down in the pinctrl-single
driver.
- Move over all GPIO portions using generic MMIO GPIO to
the new generic GPIO chip management which has a nice and
separate API.
- Proper DT bindings for some older Broadcom SoCs.
- External GPIO (EGPIO) support in the Qualcomm SM8250.
Deleted code:
- Dropped the now unused Samsung S3C24xx drivers.
-----BEGIN PGP SIGNATURE-----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=DZy/
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"We have GPIO awareness in the pin control core and an interesting
AAEON driver.
Core changes:
- Allow pins to be identified/marked as GPIO mode with a special
callback.
The pin controller core is now "aware" if a pin is in GPIO mode if
the callback is implemented in the driver, and can thus be marked
as "strict", i.e. disallowing simultaneous use of a line as GPIO
and another function such as I2C.
This is enabled in the Qualcomm TLMM driver and also implemeted
from day 1 in the new Broadcom STB driver
- Rename the pin config option PIN_CONFIG_OUTPUT to PIN_CONFIG_LEVEL
to better describe what the config is doing, as well as making it
more intuitive what shall be returned when reading this property
New drivers:
- Qualcomm SDM660 LPASS LPI TLMM pin controller subdriver
- Qualcomm Glymur family pin controller driver
- Broadcom STB family pin controller driver
- Tegra186 pin controller driver
- AAEON UP pin controller support.
This is some special pin controller that works as an external
advanced line MUX and amplifier for signals from an Intel SoC. A
cooperative effort with the GPIO maintainer was needed to reach a
solution where we reuse code from the GPIO aggregator/forwarder
driver
- Renesas RZ/T2H and RZ/N2H pin controller support
- Axis ARTPEC-8 subdriver for the Samsung pin controller driver
Improvements:
- Output enable (OEN) support in the Renesas RZG2L driver
- Properly support bias pull up/down in the pinctrl-single driver
- Move over all GPIO portions using generic MMIO GPIO to the new
generic GPIO chip management which has a nice and separate API
- Proper DT bindings for some older Broadcom SoCs
- External GPIO (EGPIO) support in the Qualcomm SM8250
Deleted code:
- Dropped the now unused Samsung S3C24xx drivers"
* tag 'pinctrl-v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (75 commits)
pinctrl: use more common syntax for compound literals
pinctrl: Simplify printks with pOF format
pinctrl: qcom: Add SDM660 LPASS LPI TLMM
dt-bindings: pinctrl: qcom: Add SDM660 LPI pinctrl
pinctrl: qcom: lpass-lpi: Add ability to use custom pin offsets
pinctrl: qcom: Add glymur pinctrl driver
dt-bindings: pinctrl: qcom: Add Glymur pinctrl
pinctrl: qcom: sm8250: Add egpio support
pinctrl: generic: rename PIN_CONFIG_OUTPUT to LEVEL
pinctrl: keembay: fix double free in keembay_build_functions()
pinctrl: spacemit: fix typo in PRI_TDI pin name
pinctrl: eswin: Fix regulator error check and Kconfig dependency
pinctrl: bcm: Add STB family pin controller driver
dt-bindings: pinctrl: Add support for Broadcom STB pin controller
pinctrl: qcom: make the pinmuxing strict
pinctrl: qcom: mark the `gpio` and `egpio` pins function as non-strict functions
pinctrl: qcom: add infrastructure for marking pin functions as GPIOs
pinctrl: allow to mark pin functions as requestable GPIOs
pinctrl: qcom: use generic pin function helpers
pinctrl: make struct pinfunction a pointer in struct function_desc
...
Add dpll device level attribute DPLL_A_PHASE_OFFSET_AVG_FACTOR to allow
control over a calculation of reported phase offset value. Attribute is
present, if the driver provides such capability, otherwise attribute
shall not be present.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250927084912.2343597-2-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With zswap using zsmalloc directly, there are no more in-tree users of
this code. Remove it.
With zpool gone, zsmalloc is now always a simple dependency and no
longer something the user needs to configure. Hide CONFIG_ZSMALLOC
from the user and have zswap and zram pull it in as needed.
Link: https://lkml.kernel.org/r/20250829162212.208258-3-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: SeongJae Park <sj@kernel.org>
Acked-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.se>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Replace incorrect plural form "busses" with "buses" in
multiple documentation files under "Documentation/driver-api".
Signed-off-by: Marneni PoornaChandu <Poornachandumarneni@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250917220430.5815-1-Poornachandumarneni@gmail.com>
Add documentation on how to resolve conflicts between CXL Fixed Memory
Windows, Platform Low Memory Holes, intermediate Switch and Endpoint
Decoders.
[dj]: Fixed inconsistent spacing after '.'
[dj]: Fixed subject line from Alison.
[dj]: Removed '::' before table from Bagas.
Reviewed-by: Gregory Price <gourry@gourry.net>
Signed-off-by: Fabio M. De Francesco <fabio.m.de.francesco@linux.intel.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Fixed the following typo errors
intersparsed ==> interspersed
in Documentation/driver-api/cxl/platform/bios-and-efi.rst
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Gregory Price <gourry@gourry.net>
Link: https://patch.msgid.link/20250818175335.5312-1-rakuram.e96@gmail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
This generic pin config property is confusingly named so let's
rename it to make things clearer.
There are already drivers in the tree that use PIN_CONFIG_OUTPUT
to *read* the value of an output driven pin, which is a big
semantic confusion for the head: are we then reading the
setting of the output or the actual value/level that is put
out on the pin?
We already have PIN_CONFIG_OUTPUT_ENABLE that turns on driver
buffers for output, so this can by logical conclusion only
drive the voltage level if it should be any different.
But if we read the pin, are we then reading the *setting* of
the output value or the *actual* value we can see on the
line?
If the pin has not first been set into output mode with
PIN_CONFIG_OUTPUT_ENABLE, but is instead in some input mode
or tristate, what will reading this property actually
return?
Reading the current users reading this property it is clear
that what we read is the logical level of the pin as 0 or 1
depending on if it is low or high.
Rename it to PIN_CONFIG_LEVEL so it is crystal clear that
we set or read the voltage level of the pin and nothing else.
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Replace FIXME comments in the pinctrl documentation example with
proper cleanup code:
- Add devm_pinctrl_put() calls in error paths
(pinctrl_lookup_state, pinctrl_select_state)
after successful devm_pinctrl_get()
- Set foo->p to NULL when devm_pinctrl_get() fails
- Add ret variable for cleaner error handling
- provides proper example of pinctrl resource management on failure
Signed-off-by: Alex Tran <alex.t.tran@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250827074525.685863-1-alex.t.tran@gmail.com
Clarify documentation for predefined standard state names 'default',
'init', 'sleep', 'idle' and their associated PM API.
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20250820075411.1178729-2-christian.bruel@foss.st.com
Introduce documentation regarding use of software nodes to describe
GPIOs on legacy boards that have not been converted to device tree.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/tnaaz2qlk5jpbonfle7uy7pb54qx6ixwuczfbkwtxxwpj7hwas@y7a2rwko3k6c
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
toctree index in USB driver api docs currently spoils the entire docs
headings due to lack of :maxdepth: option. Add the option to limit
toctree depth to 1, mirroring usb subsystem docs in
Documentation/usb/index.rst.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250820050416.25219-1-bagasdotme@gmail.com
The existing cpio extraction logic reads (maximum PATH_MAX) name_len
bytes from the archive into the collected name buffer and ensures that
the trailing byte is a null-terminator. This allows the actual file name
to be shorter than name_len, with the name string simply zero-terminated
prior to the last byte.
Initramfs generators, such as dracut-cpio[1], can take advantage of name
zero-padding to align file data segments within the archive to
filesystem block boundaries. Block boundary alignment may allow the
copy_file_range syscall to reflink archive source and destination
extents.
Link: 300e4b116c [1]
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://lore.kernel.org/r/20250819032607.28727-7-ddiss@suse.de
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Corrected a few spelling mistakes
functionalty ==> functionality
in Documentation/driver-api/cxl/devices/device-types.rst
adjascent ==> adjacent
in Documentation/driver-api/cxl/platform/example-configurations/one-dev-per-hb.rst
succeessful ==> successful
in Documentation/driver-api/thermal/exynos_thermal_emulation.rst
Signed-off-by: Ranganath V N <vnranganath.20@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250814184304.20448-1-vnranganath.20@gmail.com
Add the new v4l2 helper devm_v4l2_sensor_clk_get() to Documentation. the
helper works on both DT- and ACPI-based platforms to retrieve a
reference to the clock producer from firmware.
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Now that all drivers use v4l2_fh, we can drop the V4L2_FL_USES_V4L2_FH
checks through the V4L2 core.
To ensure that all new drivers use v4l2_fh, keep setting the
V4L2_FL_USES_V4L2_FH flag in v4l2_fh_init(), and verify it is set after
the .open() file operation returns.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Multiple drivers that use v4l2_fh and call v4l2_fh_del() manually reset
the file->private_data pointer to NULL in their video device .release()
file operation handler. Move the code to the v4l2_fh_del() function to
avoid direct access to file->private_data in drivers. This requires
adding a file pointer argument to the function.
Changes to drivers have been generated with the following coccinelle
semantic patch:
@@
expression fh;
identifier filp;
identifier release;
type ret;
@@
ret release(..., struct file *filp, ...)
{
<...
- filp->private_data = NULL;
...
- v4l2_fh_del(fh);
+ v4l2_fh_del(fh, filp);
...>
}
@@
expression fh;
identifier filp;
identifier release;
type ret;
@@
ret release(..., struct file *filp, ...)
{
<...
- v4l2_fh_del(fh);
+ v4l2_fh_del(fh, filp);
...
- filp->private_data = NULL;
...>
}
@@
expression fh;
identifier filp;
identifier release;
type ret;
@@
ret release(..., struct file *filp, ...)
{
<...
- v4l2_fh_del(fh);
+ v4l2_fh_del(fh, filp);
...>
}
Manual changes have been applied to Documentation/ to update the usage
patterns, to drivers/media/v4l2-core/v4l2-fh.c to update the
v4l2_fh_del() prototype and reset file->private_data, and to
include/media/v4l2-fh.h to update the v4l2_fh_del() function prototype
and its documentation.
Additionally, white space issues have been fixed manually in
drivers/usb/gadget/function/uvc_v4l2.c
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
All the drivers that use v4l2_fh and call v4l2_fh_add() manually store a
pointer to the v4l2_fh instance in file->private_data in their video
device .open() file operation handler. Move the code to the
v4l2_fh_add() function to avoid direct access to file->private_data in
drivers. This requires adding a file pointer argument to the function.
Changes to drivers have been generated with the following coccinelle
semantic patch:
@@
expression fh;
identifier filp;
identifier open;
type ret;
@@
ret open(..., struct file *filp, ...)
{
<...
- filp->private_data = fh;
...
- v4l2_fh_add(fh);
+ v4l2_fh_add(fh, filp);
...>
}
@@
expression fh;
identifier filp;
identifier open;
type ret;
@@
ret open(..., struct file *filp, ...)
{
<...
- v4l2_fh_add(fh);
+ v4l2_fh_add(fh, filp);
...
- filp->private_data = fh;
...>
}
Manual changes have been applied to Documentation/ to update the usage
patterns, to drivers/media/v4l2-core/v4l2-fh.c to update the
v4l2_fh_add() prototype set file->private_data, and to
include/media/v4l2-fh.h to update the v4l2_fh_add() function prototype
and its documentation.
Additionally, white space issues have been fixed manually in
drivers/media/platform/nvidia/tegra-vde/v4l2.c,
drivers/media/platform/rockchip/rkvdec/rkvdec.c,
drivers/media/v4l2-core/v4l2-fh.c and
drivers/staging/most/video/video.c.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Accessing file->private_data manually to retrieve the v4l2_fh pointer is
error-prone, as the field is a void * and will happily convert
implicitly to any pointer type. To avoid direct access to
file->private_data, introduce a new inline function that retrieves the
v4l2_fh pointer, and use it to replace common access patterns through
the kernel.
Changes to drivers have been generated with the following coccinelle
semantic patch:
@@
struct file *filp;
identifier fh;
@@
- struct v4l2_fh *fh = filp->private_data;
+ struct v4l2_fh *fh = file_to_v4l2_fh(filp);
Manual changes have been applied to Documentation/ to update the usage
patterns, and to include/media/v4l2-fh.h to add the new function.
While at it, fix a typo in the title of v4l2-fh.rst: the file describes
the "file handles" API, not "file handlers".
No functional change is intended, this only paves the way to remove
direct accesses to file->private_data and make V4L2 drivers safer.
Other accesses to the field will be addressed separately.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add CXL region debugfs attributes to inject and clear poison based
on an offset into the region. These new interfaces allow users to
operate on poison at the region level without needing to resolve
Device Physical Addresses (DPA) or target individual memdevs.
The implementation uses a new helper, region_offset_to_dpa_result()
that applies decoder interleave logic, including XOR-based address
decoding when applicable. Note that XOR decodes rely on driver
internal xormaps which are not exposed to userspace. So, this support
is not only a simplification of poison operations that could be done
using existing per memdev operations, but also it enables this
functionality for XOR interleaved regions for the first time.
New debugfs attributes are added in /sys/kernel/debug/cxl/regionX/:
inject_poison and clear_poison. These are only exposed if all memdevs
participating in the region support both inject and clear commands,
ensuring consistent and reliable behavior across multi-device regions.
If tracing is enabled, these operations are logged as cxl_poison
events in /sys/kernel/tracing/trace.
The ABI documentation warns users of the significant risks that
come with using these capabilities.
A CXL Maturity Map update shows this user flow is now supported.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/f3fd8628ab57ea79704fb2d645902cd499c066af.1754290144.git.alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
- Add documentation template for CXL conventions to document CXL platform quirks
- Replace mutex_lock_io() with mutex_lock() for mailbox
- Add location limit for fake CFMWS range for cxl_test, ARM platform enabling
- CXL documentation typo and clarity fixes
- Use correct format specifier for function cxl_set_ecs_threshold()
- Make cxl_bus_type constant
- Introduce new helper cxl_resource_contains_addr() to check address availability
- Fix wrong DPA checking for PPR operation
- Remove core/acpi.c and CXL core dependency on ACPI
- Introduce ACQUIRE() and ACQUIRE_ERR() for conditional locks
- Add CXL updates utilizing ACQUIRE() macro to remove gotos and improve
readability
- Add return for the dummy version of cxl_decoder_detach() without CONFIG_CXL_REGION
- CXL events updates for spec r3.2
- Fix return of __cxl_decoder_detach() error path
- CXL debugfs documentation fix
-----BEGIN PGP SIGNATURE-----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=79ot
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dave Jiang:
"The most significant changes in this pull request is the series that
introduces ACQUIRE() and ACQUIRE_ERR() macros to replace conditional
locking and ease the pain points of scoped_cond_guard().
The series also includes follow on changes that refactor the CXL
sub-system to utilize the new macros.
Detail summary:
- Add documentation template for CXL conventions to document CXL
platform quirks
- Replace mutex_lock_io() with mutex_lock() for mailbox
- Add location limit for fake CFMWS range for cxl_test, ARM platform
enabling
- CXL documentation typo and clarity fixes
- Use correct format specifier for function cxl_set_ecs_threshold()
- Make cxl_bus_type constant
- Introduce new helper cxl_resource_contains_addr() to check address
availability
- Fix wrong DPA checking for PPR operation
- Remove core/acpi.c and CXL core dependency on ACPI
- Introduce ACQUIRE() and ACQUIRE_ERR() for conditional locks
- Add CXL updates utilizing ACQUIRE() macro to remove gotos and
improve readability
- Add return for the dummy version of cxl_decoder_detach() without
CONFIG_CXL_REGION
- CXL events updates for spec r3.2
- Fix return of __cxl_decoder_detach() error path
- CXL debugfs documentation fix"
* tag 'cxl-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (28 commits)
Documentation/ABI/testing/debugfs-cxl: Add 'cxl' to clear_poison path
cxl/region: Fix an ERR_PTR() vs NULL bug
cxl/events: Trace Memory Sparing Event Record
cxl/events: Add extra validity checks for CVME count in DRAM Event Record
cxl/events: Add extra validity checks for corrected memory error count in General Media Event Record
cxl/events: Update Common Event Record to CXL spec rev 3.2
cxl: Fix -Werror=return-type in cxl_decoder_detach()
cleanup: Fix documentation build error for ACQUIRE updates
cxl: Convert to ACQUIRE() for conditional rwsem locking
cxl/region: Consolidate cxl_decoder_kill_region() and cxl_region_detach()
cxl/region: Move ready-to-probe state check to a helper
cxl/region: Split commit_store() into __commit() and queue_reset() helpers
cxl/decoder: Drop pointless locking
cxl/decoder: Move decoder register programming to a helper
cxl/mbox: Convert poison list mutex to ACQUIRE()
cleanup: Introduce ACQUIRE() and ACQUIRE_ERR() for conditional locks
cxl: Remove core/acpi.c and cxl core dependency on ACPI
cxl/core: Using cxl_resource_contains_addr() to check address availability
cxl/edac: Fix wrong dpa checking for PPR operation
cxl/core: Introduce a new helper cxl_resource_contains_addr()
...
Couple of small core changes and driver updates:
- Core: handling of nesting irqs to outside the lock, stream parameters
handing on port prep failures.
- AMD driver support for ACP 7.2 platforms and improved handing of slave
alerts and resume sequences
- Qualcomm updating driver debug spew
- Intel BPT message length limitations, rt721 codec as wake capable etc
-----BEGIN PGP SIGNATURE-----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=+9EP
-----END PGP SIGNATURE-----
Merge tag 'soundwire-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
"A couple of small core changes and driver updates:
- Core: handling of nesting irqs to outside the lock, stream
parameters handing on port prep failures.
- AMD driver support for ACP 7.2 platforms and improved handing of
slave alerts and resume sequences
- Qualcomm updating driver debug spew
- Intel BPT message length limitations, rt721 codec as wake capable
etc"
* tag 'soundwire-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: amd: Add support for acp7.2 platform
soundwire: stream: restore params when prepare ports fail
soundwire: debugfs: move debug statement outside of error handling
soundwire: amd: add check for status update registers
soundwire: intel_auxdevice: add rt721 codec to wake_capable_list
soundwire: Correct some property names
soundwire: update Intel BPT message length limitation
soundwire: intel_ace2.x: Use str_read_write() helper
soundwire: amd: cancel pending slave status handling workqueue during remove sequence
soundwire: amd: serialize amd manager resume sequence during pm_prepare
soundwire: qcom: demote probe registration printk
ASoC: cs42l43: Remove unnecessary work functions
soundwire: Move handle_nested_irq outside of sdw_dev_lock
MAINTAINERS: Remove Sanyog Kale as reviewer on SoundWire
-----BEGIN PGP SIGNATURE-----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=oX7n
-----END PGP SIGNATURE-----
Merge tag 'media/v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- v4l2 core:
- sub-device framework routing improvements
- NV12M tiled variants added to v4l2_format_info
- some fixes at control handler freeing logic
- fixed H264 SEPARATE_COLOUR_PLANE check
- new staging driver: Intel IPU7 PCI
- Rockchip video decoder driver got promoted from staging
- iris: added HEVC/VP9 encoder/decoder support
- vsp1: driver has gained Renesas VSPX support
- uvc:
- switched to vb2 ioctl helpers
- added MSXU 1.5 metadata support
- atomisp: GC0310 sensor driver cleanups in preparation for moving it
out of staging
- Lots of cleanup, fixes and improvements
* tag 'media/v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (310 commits)
media: rkvdec: Unstage the driver
media: rkvdec: Remove TODO file
media: dt-bindings: rockchip: Add RK3576 Video Decoder bindings
media: dt-bindings: rockchip: Document RK3588 Video Decoder bindings
media: amphion: Support dmabuf and v4l2 buffer without binding
media: verisilicon: postproc: 4K support
media: v4l2: Add support for NV12M tiled variants to v4l2_format_info()
media: uvcvideo: Use a count variable for meta_formats instead of 0 terminating
media: uvcvideo: Auto-set UVC_QUIRK_MSXU_META
media: uvcvideo: Introduce V4L2_META_FMT_UVC_MSXU_1_5
media: uvcvideo: Introduce dev->meta_formats
media: Documentation: Add note about UVCH length field
media: uvcvideo: Do not mark valid metadata as invalid
media: uvcvideo: uvc_v4l2_unlocked_ioctl: Invert PM logic
media: core: export v4l2_translate_cmd
media: uvcvideo: Turn on the camera if V4L2_EVENT_SUB_FL_SEND_INITIAL
media: uvcvideo: Remove stream->is_streaming field
media: uvcvideo: Split uvc_stop_streaming()
media: uvcvideo: Handle locks in uvc_queue_return_buffers
media: uvcvideo: Use vb2 ioctl and fop helpers
...
- The Perl kernel-doc script was added to 2.3.52pre1 just after the turn of
the millennium. Over the following 25 years, it accumulated a vast
amount of cruft, all in a language few people want to deal with anymore.
Mauro's Python replacement in 6.16 faithfully reproduced all of the cruft
in the hope of avoiding regressions. Now that we have a more reasonable
code base, though, we can work on cleaning it up; many of the changes
this time around are toward that end.
- A reorganization of the ext4 docs into the usual TOC format.
- Various Chinese translations and updates.
- A new script from Mauro to help with docs-build testing.
- A new document for linked lists
- A sweep through MAINTAINERS fixing broken GitHub git:// repository links.
...and lots of fixes and updates.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmiHe3oPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Y+EIH/0dMribAlWSrfS1sdisfkVp+nHh+DB6EA+uX
XqbJvQrukze6GvvOI2L6+3fDp+5CBtBRRSkzsNIXfFQo6p/jEbTmD/JILO0LcyDT
9iFX+W30nRetu1SqkiTGjLXgu+tF0gUE6zVnI7Lx7H10PUnUPkFbmMuwmOcOV/lC
7Lml+G1FTByGE6gDjTTyTJOqBf37uLJq33N2YnPK0SHm4DiSsWGvINxGbXrrpR5Z
7ORA6SnaIxFuy60SxL9pEH92OLS/kHRw74P/DT1dkg9BSdy4TRLM30QkZFGoiG2B
OOnnT/JJz80BzI1ctzpcwGRWfD+i8DDvujp8+aLxXYbl5N7WYw0=
=sji4
-----END PGP SIGNATURE-----
Merge tag 'docs-6.17' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It has been a relatively busy cycle for docs, especially the build
system:
- The Perl kernel-doc script was added to 2.3.52pre1 just after the
turn of the millennium. Over the following 25 years, it accumulated
a vast amount of cruft, all in a language few people want to deal
with anymore. Mauro's Python replacement in 6.16 faithfully
reproduced all of the cruft in the hope of avoiding regressions.
Now that we have a more reasonable code base, though, we can work
on cleaning it up; many of the changes this time around are toward
that end.
- A reorganization of the ext4 docs into the usual TOC format.
- Various Chinese translations and updates.
- A new script from Mauro to help with docs-build testing.
- A new document for linked lists
- A sweep through MAINTAINERS fixing broken GitHub git:// repository
links.
...and lots of fixes and updates"
* tag 'docs-6.17' of git://git.lwn.net/linux: (147 commits)
scripts: add origin commit identification based on specific patterns
sphinx: kernel_abi: fix performance regression with O=<dir>
Documentation: core-api: entry: Replace deprecated KVM entry/exit functions
docs: fault-injection: drop reference to md-faulty
docs: document linked lists
scripts: kdoc: make it backward-compatible with Python 3.7
docs: kernel-doc: emit warnings for ancient versions of Python
Documentation/rtla: Describe exit status
Documentation/rtla: Add include common_appendix.rst
docs: kernel: Clarify printk_ratelimit_burst reset behavior
Documentation: ioctl-number: Don't repeat macro names
Documentation: ioctl-number: Shorten macros table
Documentation: ioctl-number: Correct full path to papr-physical-attestation.h
Documentation: ioctl-number: Extend "Include File" column width
Documentation: ioctl-number: Fix linuxppc-dev mailto link
overlayfs.rst: fix typos
docs: kdoc: emit a warning for ancient versions of Python
docs: kdoc: clean up check_sections()
docs: kdoc: directly access the always-there KdocItem fields
docs: kdoc: straighten up dump_declaration()
...
Core & protocols
----------------
- Wrap datapath globals into net_aligned_data, to avoid false sharing.
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container).
- Add SO_INQ and SCM_INQ support to AF_UNIX.
- Add SIOCINQ support to AF_VSOCK.
- Add TCP_MAXSEG sockopt to MPTCP.
- Add IPv6 force_forwarding sysctl to enable forwarding per interface.
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB.
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users.
- Convert TCP send queue handling from tasklet to BH workque.
- Improve BPF iteration over TCP sockets to see each socket exactly once.
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code.
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel NAPI
thread when threaded NAPI gets disabled. Previously thread would stick
around until ifdown due to tricky synchronization.
- Allow multicast routing to take effect on locally-generated packets.
- Add output interface argument for End.X in segment routing.
- MCTP: add support for gateway routing, improve bind() handling.
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink.
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed.
- Support NUD_PERMANENT for proxy neighbor entries.
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM.
- Add sequence numbers to netconsole messages. Unregister netconsole's
console when all net targets are removed. Code refactoring.
Add a number of selftests.
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup.
- Support inspecting ref_tracker state via DebugFS.
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links.
- Allow providing upcall pid for the 'execute' command in openvswitch.
- Remove DCCP support from Netfilter's conntrack.
- Disallow multiple packet duplications in the queuing layer.
- Prevent use of deprecated iptables code on PREEMPT_RT.
Driver API
----------
- Support RSS and hashing configuration over ethtool Netlink.
- Add dedicated ethtool callbacks for getting and setting hashing fields.
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc.
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs.
- Support traffic classes in devlink rate API for bandwidth management.
- Remove rtnl_lock dependency from UDP tunnel port configuration.
Device drivers
--------------
- Add a new Broadcom driver for 800G Ethernet (bnge).
- Add a standalone driver for Microchip ZL3073x DPLL.
- Remove IBM's NETIUCV device driver.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is used
by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=lqbe
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Wrap datapath globals into net_aligned_data, to avoid false sharing
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)
- Add SO_INQ and SCM_INQ support to AF_UNIX
- Add SIOCINQ support to AF_VSOCK
- Add TCP_MAXSEG sockopt to MPTCP
- Add IPv6 force_forwarding sysctl to enable forwarding per interface
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users
- Convert TCP send queue handling from tasklet to BH workque
- Improve BPF iteration over TCP sockets to see each socket exactly
once
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel
NAPI thread when threaded NAPI gets disabled. Previously thread
would stick around until ifdown due to tricky synchronization
- Allow multicast routing to take effect on locally-generated packets
- Add output interface argument for End.X in segment routing
- MCTP: add support for gateway routing, improve bind() handling
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed
- Support NUD_PERMANENT for proxy neighbor entries
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM
- Add sequence numbers to netconsole messages. Unregister
netconsole's console when all net targets are removed. Code
refactoring. Add a number of selftests
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup
- Support inspecting ref_tracker state via DebugFS
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links
- Allow providing upcall pid for the 'execute' command in openvswitch
- Remove DCCP support from Netfilter's conntrack
- Disallow multiple packet duplications in the queuing layer
- Prevent use of deprecated iptables code on PREEMPT_RT
Driver API:
- Support RSS and hashing configuration over ethtool Netlink
- Add dedicated ethtool callbacks for getting and setting hashing
fields
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs
- Support traffic classes in devlink rate API for bandwidth
management
- Remove rtnl_lock dependency from UDP tunnel port configuration
Device drivers:
- Add a new Broadcom driver for 800G Ethernet (bnge)
- Add a standalone driver for Microchip ZL3073x DPLL
- Remove IBM's NETIUCV device driver
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is
used by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading"
* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
dpll: zl3073x: Fix build failure
selftests: bpf: fix legacy netfilter options
ipv6: annotate data-races around rt->fib6_nsiblings
ipv6: fix possible infinite loop in fib6_info_uses_dev()
ipv6: prevent infinite loop in rt6_nlmsg_size()
ipv6: add a retry logic in net6_rt_notify()
vrf: Drop existing dst reference in vrf_ip6_input_dst
net/sched: taprio: align entry index attr validation with mqprio
net: fsl_pq_mdio: use dev_err_probe
selftests: rtnetlink.sh: remove esp4_offload after test
vsock: remove unnecessary null check in vsock_getname()
igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
stmmac: xsk: fix negative overflow of budget in zerocopy mode
dt-bindings: ieee802154: Convert at86rf230.txt yaml format
net: dsa: microchip: Disable PTP function of KSZ8463
net: dsa: microchip: Setup fiber ports for KSZ8463
net: dsa: microchip: Write switch MAC address differently for KSZ8463
net: dsa: microchip: Use different registers for KSZ8463
net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
...
Here is the big set of USB and Thunderbolt driver changes for 6.17-rc1.
Lots of little things in here, mostly all small cleanups and updates, no
major new features this development cycle. Stuff included in here is:
- xhci minor tweaks for error handling
- typec minor updates and a driver update
- gadget driver api cleanups
- unused function removals
- unbind memory leak fixes
- a few new device ids added
- a few new devices supported for some drivers
- other minor cleanups and changes
All of these have been in linux-next with no reported issues, with the
leak fixes being in the shortest amount of time, but they are "obviously
correct" :)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaIeVLw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn3RACgg394VU3ENwqvkh1iF95fVwVheJYAn08YUeoM
98vPdogv4+kuC3B0TbiM
=7pfy
-----END PGP SIGNATURE-----
Merge tag 'usb-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for
6.17-rc1.
Lots of little things in here, mostly all small cleanups and updates,
no major new features this development cycle. Stuff included in here
is:
- xhci minor tweaks for error handling
- typec minor updates and a driver update
- gadget driver api cleanups
- unused function removals
- unbind memory leak fixes
- a few new device ids added
- a few new devices supported for some drivers
- other minor cleanups and changes
All of these have been in linux-next with no reported issues, with the
leak fixes being in the shortest amount of time, but they are
'obviously correct' :)"
* tag 'usb-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (100 commits)
usb: musb: omap2430: clean up probe error handling
usb: musb: omap2430: fix device leak at unbind
usb: gadget: udc: renesas_usb3: fix device leak at unbind
usb: dwc3: meson-g12a: fix device leaks at unbind
usb: dwc3: imx8mp: fix device leak at unbind
usb: musb: omap2430: enable compile testing
usb: gadget: udc: renesas_usb3: drop unused module alias
usb: xhci: print xhci->xhc_state when queue_command failed
usb: atm: cxacru: Merge cxacru_upload_firmware() into cxacru_heavy_init()
USB: serial: option: add Foxconn T99W709
usb: core: add urb->sgt parameter description
thunderbolt: Fix copy+paste error in match_service_id()
usb: typec: ucsi: Update power_supply on power role change
usb: typec: ucsi: psy: Set current max to 100mA for BC 1.2 and Default
usb: typec: fusb302: cache PD RX state
usb: typec: ucsi: yoga-c630: add DRM dependency
usb: gadget : fix use-after-free in composite_dev_cleanup()
usb: chipidea: imx: Add a missing blank line
usb: gadget: f_uac1: replace scnprintf() with sysfs_emit()
usb: usblp: clean up assignment inside if conditions
...
Here is the big set of TTY and Serial driver updates for 6.17-rc1.
Included in here is the following types of changes:
- another cleanup round from Jiri for the 8250 serial driver and some
other tty drivers, things are slowly getting better with our apis
thanks to this work. This touched many tty drivers all over the
tree.
- qcom_geni_serial driver update for new platforms and devices
- 8250 quirk handling fixups
- dt serial binding updates for different boards/platforms
- other minor cleanups and fixes
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaIeWPw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymQHgCfR3KXFe7ElzXQqjJhtN/ej6IPijIAoI6k3g0m
4UewNOIef9XpIAJ8zuoo
=850o
-----END PGP SIGNATURE-----
Merge tag 'tty-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of TTY and Serial driver updates for 6.17-rc1.
Included in here is the following types of changes:
- another cleanup round from Jiri for the 8250 serial driver and some
other tty drivers, things are slowly getting better with our apis
thanks to this work. This touched many tty drivers all over the
tree.
- qcom_geni_serial driver update for new platforms and devices
- 8250 quirk handling fixups
- dt serial binding updates for different boards/platforms
- other minor cleanups and fixes
All of these have been in linux-next with no reported issues"
* tag 'tty-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
dt-bindings: serial: snps-dw-apb-uart: Allow use of a power-domain
serial: 8250: fix panic due to PSLVERR
dt-bindings: serial: samsung: add samsung,exynos2200-uart compatible
vt: defkeymap: Map keycodes above 127 to K_HOLE
vt: keyboard: Don't process Unicode characters in K_OFF mode
serial: qcom-geni: Enable Serial on SA8255p Qualcomm platforms
serial: qcom-geni: Enable PM runtime for serial driver
serial: qcom-geni: move clock-rate logic to separate function
serial: qcom-geni: move resource control logic to separate functions
serial: qcom-geni: move resource initialization to separate function
soc: qcom: geni-se: Enable QUPs on SA8255p Qualcomm platforms
dt-bindings: qcom: geni-se: describe SA8255p
dt-bindings: serial: describe SA8255p
serial: 8250_dw: Fix typo "notifer"
dt-bindings: serial: 8250: spacemit: set clocks property as required
dt-bindings: serial: renesas: Document RZ/V2N SCIF
serial: 8250_ce4100: Fix CONFIG_SERIAL_8250=n build
tty: omit need_resched() before cond_resched()
serial: 8250_ni: Reorder local variables
serial: 8250_ni: Fix build warning
...
Apart from the usual mix of new drivers (pwm-argon-fan-hat), adding
support for variants to existing drivers, minor improvements to both
drivers and docs, device tree documenation updates, the noteworthy
changes are:
- A pull of pm-runtime-6.17-rc1 to make it possible to apply
a582469541 ("pwm: img: Remove redundant pm_runtime_mark_last_busy()
calls"). Note this updates the base for my tree to 6.16-rc2.
- A hwmon companion driver to pwm-mc33xs2410 living in drivers/hwmon
and acked by Guenter Roeck
- chardev support for PWM devices
This leverages atomic PWM updates to userspace and at the same time
simplifies and accelerates PWM configuration changes.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmiHQoMACgkQj4D7WH0S
/k4vGgf+P74bLox7nuZH3lE+D9+HIsfNafELW3TdbmaOF4/iTWOs5/8tUqig3Joc
b82BHjiuxC0mlHYFC0JcCdW29SKjFUWwZMkB4p0R1vICmQ9MVGC89ABvkTx6mVuF
Cse8vuQcRXMqt/oo9tcqsJbJmvpLCV+AlD4rdFDTWplVNmrEX2kG5qmdiUmMjjMW
QNpOxUvdQcKYwrrQjQlEMc+4VmlUN7yDhaw04FzAXg9PPuFfoJEN51PJRdZKDRzP
ScdViYj3tSpQAXb/mJGKWR5brJw+d4BRzFk3kJR5Sj1WAYSQNpKyhAEGXOX6YteT
4eehd1xeUG9a8rBctV3CP+38RxcNew==
=KEjP
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"Apart from the usual mix of new drivers (pwm-argon-fan-hat), adding
support for variants to existing drivers, minor improvements to both
drivers and docs, device tree documenation updates, the noteworthy
changes are:
- A hwmon companion driver to pwm-mc33xs2410 living in drivers/hwmon
and acked by Guenter Roeck
- chardev support for PWM devices. This leverages atomic PWM updates
to userspace and at the same time simplifies and accelerates PWM
configuration changes"
* tag 'pwm/for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (35 commits)
pwm: raspberrypi-poe: Fix spelling mistake "Firwmware" -> "Firmware"
hwmon: add support for MC33XS2410 hardware monitoring
pwm: mc33xs2410: add hwmon support
pwm: img: Remove redundant pm_runtime_mark_last_busy() calls
pwm: Expose PWM_WFHWSIZE in public header
dt-bindings: pwm: Convert lpc32xx-pwm.txt to yaml format
docs: pwm: Adapt Locking paragraph to reality
pwm: twl-led: Drop driver local locking
pwm: sun4i: Drop driver local locking
pwm: sti: Drop driver local locking
pwm: microchip-core: Drop driver local locking
pwm: lpc18xx-sct: Drop driver local locking
pwm: fsl-ftm: Drop driver local locking
pwm: clps711x: Drop driver local locking
pwm: atmel: Drop driver local locking
pwm: argon-fan-hat: Add Argon40 Fan HAT support
dt-bindings: pwm: argon40,fan-hat: Document Argon40 Fan HAT
dt-bindings: vendor-prefixes: Document Argon40
pwm: pwm-mediatek: Add support for PWM IP V3.0.2 in MT6991/MT8196
pwm: pwm-mediatek: Pass PWM_CK_26M_SEL from platform data
...
GPIOLIB core:
- introduce a parallel, limited sysfs user ABI that doesn't expose the
global GPIO numbers to user-space while maintaining backward
compatibility with the end goal of it completely replacing the existing
interface, allowing us to remove it
- remove the legacy devm_gpio_request() routine which has no more users
- start the process of allowing to compile-out the legacy parts of the
GPIO core for users who don't need it by introducing a new Kconfig
option: GPIOLIB_LEGACY
- don't use global GPIO numbers in debugfs output from the core code
(drivers still do it, the work is ongoing)
- start the process of moving the fields specific to the gpio-mmio helper
out of the core struct gpio_chip into their own structure that wraps
it: create a new header with modern interfaces and convert several
drivers to using it
- remove the platform data structure associated with the gpio-mmio helper
from the kernel after having converted all remaining users to generic
device properties
- remove legacy struct gpio definition as it has no more users
New drivers:
- add the GPIO driver for the Apple System Management Controller
Driver improvements:
- add support for new models to gpio-adp5585, gpio-tps65219 and
gpio-pca953x
- extend the interrupt support in gpio-loongson-64bit
- allow to mark the simulated GPIO lines as invalid in gpio-sim
- convert all remaining GPIO drivers to using the new GPIO value setter
callbacks
- convert gpio-rcar to using simple device power management ops callbacks
- don't check if current direction of a line is output before setting
the value in gpio-pisosr and ti-fpc202: the GPIO core already handles
that
- also drop unneeded GPIO range checks in drivers, the core already makes
sure we're within bounds when calling driver callbacks
- use dev_fwnode() where applicable across GPIO drivers
- set line value in gpio-zynqmp-modepin and gpio-twl6040 when the user
wants to change direction of the pin to output even though these
drivers don't need to do anything else to actually set the direction,
otherwise a call like gpiod_direction_output(d, 1) will not result in
the line driver high
- remove the reduntant call to pm_runtime_mark_last_busy() from
gpio-arizona
- use lock guards in gpio-cadence and gpio-mxc
- check the return values of regmap functions in gpio-wcd934x and
gpio-tps65912
- use better regmap interfaces in gpio-wcove and gpio-pca953x
- remove dummy GPIO chip callbacks from several drivers in cases where
the GPIO core can already handle their absence
- allow building gpio-palmas as a module
Fixes:
- use correct bit widths (according to the documentation) in gpio-virtio
Device-tree bindings:
- convert several of the legacy .txt documents for many different devices
to YAML, improving automatic validation
- create a "trivial" GPIO DT schema that covers a wide range of simple
hardware that share a set of basic GPIO properties
- document new HW: Apple MAC SMC GPIO block and adp5589 I/O expander
- document a new model for pca95xx
- add and/or remove properties in YAML documents for gpio-rockchip,
fsl,qoriq-gpio, arm,pl061 and gpio-xilinx
Misc:
- some minor refactoring in several places, adding/removing forward
declarations, moving defines to better places, constify the arguments
in some functions, remove duplicate includes, etc.
- documentation updates
-----BEGIN PGP SIGNATURE-----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=tUPm
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There's one new driver (Apple SMC) and extensions to existing drivers
for supporting new HW models. A lot of different impovements across
drivers and in core GPIO code. Details on that are in the signed tag
as usual.
We managed to remove some of the legacy APIs. Arnd Bergmann started to
work on making the legacy bits optional so that we may compile them
only for older platforms that still really need them.
Rob Herring has done a lot of work to convert legacy .txt dt-bindings
for GPIO controllers to YAML. There are only a few left now in the
GPIO tree.
A big part of the commits in this PR concern the conversion of GPIO
drivers to using the new line value setter callbacks. This conversion
is now complete treewide (unless I've missed something) and once all
the changes from different trees land in mainline, I'll send you
another PR containing a commit dropping the legacy callbacks from the
tree.
As the quest to pay back technical dept never really ends, we're
starting another set of interface conversions, this time it's about
moving fields specific to only a handful of drivers using the
gpio-mmio helper out of the core gpio_chip structure that every
controller implements and uses. This cycle we introduce a new set of
APIs and convert a few drivers under drivers/gpio/, next cycle we'll
convert remaining modules treewide (in gpio, pinctrl and mfd trees)
and finally remove the old interfaces and move the gpio-mmio fields
into their own structure wrapping gpio_chip.
One last change I should mention here is the rework of the sysfs
interface. In 2016, we introduced the GPIO character device as the
preferred alternative to the sysfs class under /sys/class/gpio. While
it has seen a wide adoption with the help of its user-space
counterpart - libgpiod - there are still users who prefer the
simplicity of sysfs.
As far as the GPIO subsystem is concerned, the problem is not the
existince of the GPIO class as such but rather the fact that it
exposes the global GPIO numbers to the user-space, stopping us from
ever being able to remove the numberspace from the kernel. To that
end, this release we introduced a parallel, limited sysfs interface
that doesn't expose these numbers and only implements a subset of
features that are relevant to the existing users. This is a result of
several discussions over the course of last year and should allow us
to remove the legacy part some time in the future.
Summary:
GPIOLIB core:
- introduce a parallel, limited sysfs user ABI that doesn't expose
the global GPIO numbers to user-space while maintaining backward
compatibility with the end goal of it completely replacing the
existing interface, allowing us to remove it
- remove the legacy devm_gpio_request() routine which has no more
users
- start the process of allowing to compile-out the legacy parts of
the GPIO core for users who don't need it by introducing a new
Kconfig option: GPIOLIB_LEGACY
- don't use global GPIO numbers in debugfs output from the core code
(drivers still do it, the work is ongoing)
- start the process of moving the fields specific to the gpio-mmio
helper out of the core struct gpio_chip into their own structure
that wraps it: create a new header with modern interfaces and
convert several drivers to using it
- remove the platform data structure associated with the gpio-mmio
helper from the kernel after having converted all remaining users
to generic device properties
- remove legacy struct gpio definition as it has no more users
New drivers:
- add the GPIO driver for the Apple System Management Controller
Driver improvements:
- add support for new models to gpio-adp5585, gpio-tps65219 and
gpio-pca953x
- extend the interrupt support in gpio-loongson-64bit
- allow to mark the simulated GPIO lines as invalid in gpio-sim
- convert all remaining GPIO drivers to using the new GPIO value
setter callbacks
- convert gpio-rcar to using simple device power management ops
callbacks
- don't check if current direction of a line is output before setting
the value in gpio-pisosr and ti-fpc202: the GPIO core already
handles that
- also drop unneeded GPIO range checks in drivers, the core already
makes sure we're within bounds when calling driver callbacks
- use dev_fwnode() where applicable across GPIO drivers
- set line value in gpio-zynqmp-modepin and gpio-twl6040 when the
user wants to change direction of the pin to output even though
these drivers don't need to do anything else to actually set the
direction, otherwise a call like gpiod_direction_output(d, 1) will
not result in the line driver high
- remove the reduntant call to pm_runtime_mark_last_busy() from
gpio-arizona
- use lock guards in gpio-cadence and gpio-mxc
- check the return values of regmap functions in gpio-wcd934x and
gpio-tps65912
- use better regmap interfaces in gpio-wcove and gpio-pca953x
- remove dummy GPIO chip callbacks from several drivers in cases
where the GPIO core can already handle their absence
- allow building gpio-palmas as a module
Fixes:
- use correct bit widths (according to the documentation) in
gpio-virtio
Device-tree bindings:
- convert several of the legacy .txt documents for many different
devices to YAML, improving automatic validation
- create a "trivial" GPIO DT schema that covers a wide range of
simple hardware that share a set of basic GPIO properties
- document new HW: Apple MAC SMC GPIO block and adp5589 I/O expander
- document a new model for pca95xx
- add and/or remove properties in YAML documents for gpio-rockchip,
fsl,qoriq-gpio, arm,pl061 and gpio-xilinx
Misc:
- some minor refactoring in several places, adding/removing forward
declarations, moving defines to better places, constify the
arguments in some functions, remove duplicate includes, etc.
- documentation updates"
* tag 'gpio-updates-for-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (202 commits)
MIPS: alchemy: gpio: use new GPIO line value setter callbacks for the remaining chips
gpiolib: enable CONFIG_GPIOLIB_LEGACY even for !GPIOLIB
gpio: virtio: Fix config space reading.
gpiolib: make legacy interfaces optional
dt-bindings: gpio: rockchip: Allow use of a power-domain
gpiolib: of: add forward declaration for struct device_node
power: reset: macsmc-reboot: Add driver for rebooting via Apple SMC
gpio: Add new gpio-macsmc driver for Apple Macs
mfd: Add Apple Silicon System Management Controller
soc: apple: rtkit: Make shmem_destroy optional
dt-bindings: mfd: Add Apple Mac System Management Controller
dt-bindings: power: reboot: Add Apple Mac SMC Reboot Controller
dt-bindings: gpio: Add Apple Mac SMC GPIO block
gpio: cadence: Remove duplicated include in gpio-cadence.c
gpio: tps65219: Add support for TI TPS65214 PMIC
gpio: tps65219: Update _IDX & _OFFSET macro prefix
gpio: sysfs: Fix an end of loop test in gpiod_unexport()
dt-bindings: gpio: Convert qca,ar7100-gpio to DT schema
dt-bindings: gpio: Convert maxim,max3191x to DT schema
dt-bindings: gpio: fsl,qoriq-gpio: Add missing mpc8xxx compatibles
...
- Convert EAGAIN into ENODATA in temp_show() to prevent user space from
polling the sysfs file in vain after a failing O_NONBLOCK read under
the assumption that the read would have blocked (Hsin-Te Yuan)
- Add Wildcat Lake PCI ID to the int340x Intel processor thermal driver
(Srinivas Pandruvada)
- Add debugfs interface to override the temperature set by the firmware
in the Intel platform temperature control (PTC) interface and add a
new sysfs control attribute called thermal_tolerance to it (Srinivas
Pandruvada)
- Enable the stage 2 shutdown in the qcom-spmi-temp-alarm thermal
driver and add support for more SPMI variants to it (Anjelique
Melendez)
- Constify the thermal_zone_device_ops structure where possible in
several assorted thermal drivers (Christophe Jaillet)
- Use the dev_fwnode() helper instead of of_fwnode_handle(), as it is
more adequate, wherever possible in thermal drivers (Jiri Slaby)
- Implement and document One-Time Programmable fuse support in the
Rockchip thermal driver in order to increase the precision of the
measurements (Nicolas Frattaroli)
- Change the way the Mediatek LTVS thermal driver stores the
initialization data sequence to support different sequences
matching different platforms. Introduce mt7988 support with
a new initialization sequence (Mason Chang)
- Document the QCom TSens Milos Temperature Sensor DT bindings (Luca
Weiss)
- Add the fallback compatible string for MT7981 and MT8516 DT bindings
(Aleksander Jan Bajkowski)
- Add the compatible string for the Tegra210B01 SOC_THERM driver (Aaron
Kling)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmh/j4ESHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1r54IAImMVSzbSfMvvB0b1PDa2nEbBVt8xNEg
2BPwZv1CrdJXq95VJQDJQRmsdZVzzNIL0gRruyaXnSDa4zhyoNb3nXhjY7eNqhlP
2CBANscs7zgQ3DiAFuz3VJ7ns10KCAAEj2r3gdTxkm0MveOrDhOn3bLdr9+NN7P8
n0zo9p4W2RDXXXjTMJul0qliZpJoadDqN+fl2V/u7vPLcjlp1JBV84sZPKt8mGIe
o44Sp9NSjZ20GDpOPzXKJnK9RRQsxxs40x4d3C3kpmiagzMjyV3ku1K2e0FAucUv
Y0V91HiHCgdNSLa/Z4laIdFJc6Wa8tsEb7mItg96cPFmSCaFvcZPucM=
=ysPD
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These update the thermal control sysfs interface and multiple thermal
control drivers:
- Convert EAGAIN into ENODATA in temp_show() to prevent user space
from polling the sysfs file in vain after a failing O_NONBLOCK read
under the assumption that the read would have blocked (Hsin-Te
Yuan)
- Add Wildcat Lake PCI ID to the int340x Intel processor thermal
driver (Srinivas Pandruvada)
- Add debugfs interface to override the temperature set by the
firmware in the Intel platform temperature control (PTC) interface
and add a new sysfs control attribute called thermal_tolerance to
it (Srinivas Pandruvada)
- Enable the stage 2 shutdown in the qcom-spmi-temp-alarm thermal
driver and add support for more SPMI variants to it (Anjelique
Melendez)
- Constify the thermal_zone_device_ops structure where possible in
several assorted thermal drivers (Christophe Jaillet)
- Use the dev_fwnode() helper instead of of_fwnode_handle(), as it is
more adequate, wherever possible in thermal drivers (Jiri Slaby)
- Implement and document One-Time Programmable fuse support in the
Rockchip thermal driver in order to increase the precision of the
measurements (Nicolas Frattaroli)
- Change the way the Mediatek LTVS thermal driver stores the
initialization data sequence to support different sequences
matching different platforms. Introduce mt7988 support with a new
initialization sequence (Mason Chang)
- Document the QCom TSens Milos Temperature Sensor DT bindings (Luca
Weiss)
- Add the fallback compatible string for MT7981 and MT8516 DT
bindings (Aleksander Jan Bajkowski)
- Add the compatible string for the Tegra210B01 SOC_THERM driver
(Aaron Kling)"
* tag 'thermal-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
dt-bindings: thermal: tegra: Document Tegra210B01
dt-bindings: thermal: mediatek: Add fallback compatible string for MT7981 and MT8516
dt-bindings: thermal: qcom-tsens: document the Milos Temperature Sensor
thermal/drivers/mediatek/lvts_thermal: Add mt7988 lvts commands
thermal/drivers/mediatek/lvts_thermal: Add lvts commands and their sizes to driver data
thermal/drivers/mediatek/lvts_thermal: Change lvts commands array to static const
thermal/drivers/rockchip: Support reading trim values from OTP
dt-bindings: thermal: rockchip: document otp thermal trim
thermal/drivers/rockchip: Support RK3576 SoC in the thermal driver
dt-bindings: rockchip-thermal: Add RK3576 compatible
thermal/drivers/rockchip: Rename rk_tsadcv3_tshut_mode
thermal: Use dev_fwnode()
thermal: Constify struct thermal_zone_device_ops
thermal/drivers/loongson2: Constify struct thermal_zone_device_ops
thermal/drivers/qcom-spmi-temp-alarm: Add support for LITE PMIC peripherals
thermal/drivers/qcom-spmi-temp-alarm: Add support for GEN2 rev 2 PMIC peripherals
thermal/drivers/qcom-spmi-temp-alarm: Prepare to support additional Temp Alarm subtypes
thermal/drivers/qcom-spmi-temp-alarm: Add temp alarm data struct based on HW subtype
thermal/drivers/qcom-spmi-temp-alarm: Enable stage 2 shutdown when required
thermal: sysfs: Return ENODATA instead of EAGAIN for reads
...
Update ``->error_handler()`` section of the libata documentation file
Documentation/driver-api/libata.rst to remove the reference to the
function ata_do_eh() as that function was removed. The reference to the
function ata_bmdma_drive_eh() is also removed as that function does not
exist at all. And while at it, cleanup the description of the various
reset operations using a bullet list.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20250716020315.235457-4-dlemoal@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
We have the distinction between pwm_apply_atomic() and
pwm_apply_might_sleep() since commit c748a6d77c (pwm: Rename
pwm_apply_state() to pwm_apply_might_sleep()) contained in v6.8-rc1.
Locking in the core was introduced in commit 1cc2e1faaf ("pwm: Add
more locking", contained in v6.13-rc1) to serialize per-chip callbacks
and device removal.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250624100500.1429163-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Fix several typos and improve comment clarity in the CXL device types
docs:
"w/" replaced with "with"
"sill" -> "still"
"The allows" -> "This allows"
"capacity" corrected to "capable"
"more devices" corrected to "more upstream devices" in MLD description
These changes improve readability and enhance the documentation quality.
[ dj: Fix up "one or more hosts" to "one or more upstream devices" from
Gregory ]
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Gregory Price <gourry@gourry.net>
Link: https://patch.msgid.link/20250616060737.1645393-1-alok.a.tiwari@oracle.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Fix typo 'enumates' to 'enumerate' in CXL driver operation
documentation to improve readability.
Signed-off-by: Nai-Chen Cheng <bleach1827@gmail.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20250610173152.33566-1-bleach1827@gmail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
This patch corrects several typographical issues and improves phrasing
in memory-devices.rst:
- Fixes duplicate word ("1 one") and adjusts phrasing for clarity.
- Adds missing hyphen in "on-device".
- Corrects "a give memory device" to "a given memory device".
- fix singular/plural "decoder resource" -> "decoder resources".
- Clarifies "spans to Host Bridges" -> "spans two Host Bridges".
- change "at a" -> "a"
These changes improve readability and accuracy of the documentation.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20250609171130.2375901-1-alok.a.tiwari@oracle.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
There exists shipping platforms that bend, break, or otherwise lean on
ambiguities in the CXL specification. Without driver changes to accommodate
these deviations, end users are left without CXL subsystem RAS features.
Specifically, provisioning, error translation, and other flows require the
CXL subsystem to understand the platforms CXL topology beyond undecorated
memory address ranges.
Those isolated compatibility problems risk growing into deeper upstream
maintenance burden if different platform vendors arrive at diverging
solutions. For example, there are multiple options for resolving
low-memory-mmio intersecting large-interleave-ways CXL windows. Linux
should only entertain one solution to that problem.
Now, with the ACPI Specification Working Group, situations like this would
be resolved with the "Code First ECN" process to codify Linux expectations
in a specification. In the absence of such a process for the CXL
specification, create a file in Linux documentation to detail the
motivations, assumptions, tradeoffs, and proposals for amending
specification language.
The goal is to capture the issues such that platform vendors arrive at
compatible solutions for these problems and serve as a repository for
potential specification updates. The expectation is to update
conventions.rst along with CXL subsystem code changes to accommodate the
platform topology.
[ dj: Rebased against v6.16-rc1 ]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Link: https://patch.msgid.link/20250603185254.3730099-1-dan.j.williams@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
v4l2_ctrl_handler_free() no longer resets the handler's error code.
Document it.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add new netlink attribute to allow user space configuration of reference
sync pin pairs, where both pins are used to provide one clock signal
consisting of both: base frequency and sync signal.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Milena Olech <milena.olech@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20250626135219.1769350-2-arkadiusz.kubalewski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Long before introduction of lore.kernel.org, people would link
to LKML threads on third-party archives (here spinics.net), which
in some cases can be unreliable (as these were outside of
kernel.org control). Replace links to them with lore counterparts
(if any).
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250611065254.36608-2-bagasdotme@gmail.com
usb_unlink_anchored_urbs() has been unused since it's last use was
removed in 2009 by
commit 9b9c5aaeed ("ar9170: xmit code revamp")
Remove it.
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20250608235617.200731-1-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Firmware-based thermal temperature control loops may aggressively
throttle performance to prevent temperature overshoots relative to the
defined target temperature. This can negatively impact performance. User
space may prefer to prioritize performance, even if it results in
temperature overshoots with in acceptable range.
For example, user space might tolerate temperature overshoots when the
device is placed on a desk, as opposed to when it's on a lap. To
accommodate such scenarios, an optional attribute is provided to specify
a tolerance level for temperature overshoots while maintaining acceptable
performance.
Attribute:
thermal_tolerance: This attribute ranges from 0 to 7, where 0 represents
the most aggressive control to avoid any temperature overshoots, and 7
represents a more graceful approach, favoring performance even at the
expense of temperature overshoots.
Note: This level may not scale linearly. For example, a value of 3 does not
necessarily imply a 50% improvement in performance compared to a value of 0.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Link: https://patch.msgid.link/20250613214923.2910397-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add enum dpll_feature_state for control over features.
Add dpll device level attribute:
DPLL_A_PHASE_OFFSET_MONITOR - to allow control over a phase offset monitor
feature. Attribute is present and shall return current state of a feature
(enum dpll_feature_state), if the device driver provides such capability,
otherwie attribute shall not be present.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Milena Olech <milena.olech@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250612152835.1703397-2-arkadiusz.kubalewski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The limitation of "must be multiples of 32 bytes" does not fit the
requirement of current Intel platforms. Update it to meet the
requirement.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20250429122337.142551-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Here is the big char/misc/iio and other small driver subsystem pull
request for 6.16-rc1.
Overall, a lot of individual changes, but nothing major, just the normal
constant forward progress of new device support and cleanups to existing
subsystems. Highlights in here are:
- Large IIO driver updates and additions and device tree changes
- Android binder bugfixes and logfile fixes
- mhi driver updates
- comedi driver updates
- counter driver updates and additions
- coresight driver updates and additions
- echo driver removal as there are no in-kernel users of it
- nvmem driver updates
- spmi driver updates
- new amd-sbi driver "subsystem" and drivers added
- rust miscdriver binding documentation fix
- other small driver fixes and updates (uio, w1, acrn, hpet, xillybus,
cardreader drivers, fastrpc and others.)
All of these have been in linux-next for quite a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaEKg5Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykUyACgmAzrzKMoQUwwhQ6ed2l7tHdrlOcAoIORI1/x
pNqQdrE1EbmAAyl47IN4
=ts6J
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / iio driver updates from Greg KH:
"Here is the big char/misc/iio and other small driver subsystem pull
request for 6.16-rc1.
Overall, a lot of individual changes, but nothing major, just the
normal constant forward progress of new device support and cleanups to
existing subsystems. Highlights in here are:
- Large IIO driver updates and additions and device tree changes
- Android binder bugfixes and logfile fixes
- mhi driver updates
- comedi driver updates
- counter driver updates and additions
- coresight driver updates and additions
- echo driver removal as there are no in-kernel users of it
- nvmem driver updates
- spmi driver updates
- new amd-sbi driver "subsystem" and drivers added
- rust miscdriver binding documentation fix
- other small driver fixes and updates (uio, w1, acrn, hpet,
xillybus, cardreader drivers, fastrpc and others)
All of these have been in linux-next for quite a while with no
reported problems"
* tag 'char-misc-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (390 commits)
binder: fix yet another UAF in binder_devices
counter: microchip-tcb-capture: Add watch validation support
dt-bindings: iio: adc: Add ROHM BD79100G
iio: adc: add support for Nuvoton NCT7201
dt-bindings: iio: adc: add NCT7201 ADCs
iio: chemical: Add driver for SEN0322
dt-bindings: trivial-devices: Document SEN0322
iio: adc: ad7768-1: reorganize driver headers
iio: bmp280: zero-init buffer
iio: ssp_sensors: optimalize -> optimize
HID: sensor-hub: Fix typo and improve documentation
iio: admv1013: replace redundant ternary operator with just len
iio: chemical: mhz19b: Fix error code in probe()
iio: adc: at91-sama5d2: use IIO_DECLARE_BUFFER_WITH_TS
iio: accel: sca3300: use IIO_DECLARE_BUFFER_WITH_TS
iio: adc: ad7380: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: adc: ad4695: rename AD4695_MAX_VIN_CHANNELS
iio: adc: ad4695: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: introduce IIO_DECLARE_BUFFER_WITH_TS macros
iio: make IIO_DMA_MINALIGN minimum of 8 bytes
...
New support:
- Renesas RZ/V2H(P) dma support for r9a09g057
- Arm DMA-350 driver
- Tegra Tegra264 ADMA support
Updates:
- AMD ptdma driver code removal and optimizations
- Freescale edma error interrupt handler support
-----BEGIN PGP SIGNATURE-----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=cu98
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"A fairly small update for the dmaengine subsystem. This has a new ARM
dmaengine driver and couple of new device support and few driver
changes:
New support:
- Renesas RZ/V2H(P) dma support for r9a09g057
- Arm DMA-350 driver
- Tegra Tegra264 ADMA support
Updates:
- AMD ptdma driver code removal and optimizations
- Freescale edma error interrupt handler support"
* tag 'dmaengine-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (27 commits)
dmaengine: idxd: Remove unused pointer and macro
arm64: dts: renesas: r9a09g057: Add DMAC nodes
dmaengine: sh: rz-dmac: Add RZ/V2H(P) support
dmaengine: sh: rz-dmac: Allow for multiple DMACs
irqchip/renesas-rzv2h: Add rzv2h_icu_register_dma_req()
dt-bindings: dma: rz-dmac: Document RZ/V2H(P) family of SoCs
dt-bindings: dma: rz-dmac: Restrict properties for RZ/A1H
dmaengine: idxd: Narrow the restriction on BATCH to ver. 1 only
dmaengine: ti: Add NULL check in udma_probe()
fsldma: Set correct dma_mask based on hw capability
dmaengine: idxd: Check availability of workqueue allocated by idxd wq driver before using
dmaengine: xilinx_dma: Set dma_device directions
dmaengine: tegra210-adma: Add Tegra264 support
dt-bindings: Document Tegra264 ADMA support
dmaengine: dw-edma: Add HDMA NATIVE map check
dmaegnine: fsl-edma: add edma error interrupt handler
dt-bindings: dma: fsl-edma: increase maxItems of interrupts and interrupt-names
dmaengine: ARM_DMA350 should depend on ARM/ARM64
dt-bindings: dma: qcom,bam: Document dma-coherent property
dmaengine: Add Arm DMA-350 driver
...
-----BEGIN PGP SIGNATURE-----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=eWJw
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Print the actual delay time in pci_bridge_wait_for_secondary_bus()
instead of assuming it was 1000ms (Wilfred Mallawa)
- Revert 'iommu/amd: Prevent binding other PCI drivers to IOMMU PCI
devices', which broke resume from system sleep on AMD platforms and
has been fixed by other commits (Lukas Wunner)
Resource management:
- Remove mtip32xx use of pcim_iounmap_regions(), which is deprecated
and unnecessary (Philipp Stanner)
- Remove pcim_iounmap_regions() and pcim_request_region_exclusive()
and related flags since all uses have been removed (Philipp
Stanner)
- Rework devres 'request' functions so they are no longer 'hybrid',
i.e., their behavior no longer depends on whether
pcim_enable_device or pci_enable_device() was used, and remove
related code (Philipp Stanner)
- Warn (not BUG()) about failure to assign optional resources (Ilpo
Järvinen)
Error handling:
- Log the DPC Error Source ID only when it's actually valid (when
ERR_FATAL or ERR_NONFATAL was received from a downstream device)
and decode into bus/device/function (Bjorn Helgaas)
- Determine AER log level once and save it so all related messages
use the same level (Karolina Stolarek)
- Use KERN_WARNING, not KERN_ERR, when logging PCIe Correctable
Errors (Karolina Stolarek)
- Ratelimit PCIe Correctable and Non-Fatal error logging, with sysfs
controls on interval and burst count, to avoid flooding logs and
RCU stall warnings (Jon Pan-Doh)
Power management:
- Increment PM usage counter when probing reset methods so we don't
try to read config space of a powered-off device (Alex Williamson)
- Set all devices to D0 during enumeration to ensure ACPI opregion is
connected via _REG (Mario Limonciello)
Power control:
- Rename pwrctrl Kconfig symbols from 'PWRCTL' to 'PWRCTRL' to match
the filename paths. Retain old deprecated symbols for
compatibility, except for the pwrctrl slot driver
(PCI_PWRCTRL_SLOT) (Johan Hovold)
- When unregistering pwrctrl, cancel outstanding rescan work before
cleaning up data structures to avoid use-after-free issues (Brian
Norris)
Bandwidth control:
- Simplify link bandwidth controller by replacing the count of Link
Bandwidth Management Status (LBMS) events with a PCI_LINK_LBMS_SEEN
flag (Ilpo Järvinen)
- Update the Link Speed after retraining, since the Link Speed may
have changed (Ilpo Järvinen)
PCIe native device hotplug:
- Ignore Presence Detect Changed caused by DPC.
pciehp already ignores Link Down/Up events caused by DPC, but on
slots using in-band presence detect, DPC causes a spurious Presence
Detect Changed event (Lukas Wunner)
- Ignore Link Down/Up caused by Secondary Bus Reset.
On hotplug ports using in-band presence detect, the reset causes a
Presence Detect Changed event, which mistakenly caused teardown and
re-enumeration of the device. Drivers may need to annotate code
that resets their device (Lukas Wunner)
Virtualization:
- Add an ACS quirk for Loongson Root Ports that don't advertise ACS
but don't allow peer-to-peer transactions between Root Ports; the
quirk allows each Root Port to be in a separate IOMMU group (Huacai
Chen)
Endpoint framework:
- For fixed-size BARs, retain both the actual size and the possibly
larger size allocated to accommodate iATU alignment requirements
(Jerome Brunet)
- Simplify ctrl/SPAD space allocation and avoid allocating more space
than needed (Jerome Brunet)
- Correct MSI-X PBA offset calculations for DesignWare and Cadence
endpoint controllers (Niklas Cassel)
- Align the return value (number of interrupts) encoding for
pci_epc_get_msi()/pci_epc_ops::get_msi() and
pci_epc_get_msix()/pci_epc_ops::get_msix() (Niklas Cassel)
- Align the nr_irqs parameter encoding for
pci_epc_set_msi()/pci_epc_ops::set_msi() and
pci_epc_set_msix()/pci_epc_ops::set_msix() (Niklas Cassel)
Common host controller library:
- Convert pci-host-common to a library so platforms that don't need
native host controller drivers don't need to include these helper
functions (Manivannan Sadhasivam)
Apple PCIe controller driver:
- Extract ECAM bridge creation helper from pci_host_common_probe() to
separate driver-specific things like MSI from PCI things (Marc
Zyngier)
- Dynamically allocate RID-to_SID bitmap to prepare for SoCs with
varying capabilities (Marc Zyngier)
- Skip ports disabled in DT when setting up ports (Janne Grunau)
- Add t6020 compatible string (Alyssa Rosenzweig)
- Add T602x PCIe support (Hector Martin)
- Directly set/clear INTx mask bits because T602x dropped the
accessors that could do this without locking (Marc Zyngier)
- Move port PHY registers to their own reg items to accommodate
T602x, which moves them around; retain default offsets for existing
DTs that lack phy%d entries with the reg offsets (Hector Martin)
- Stop polling for core refclk, which doesn't work on T602x and the
bootloader has already done anyway (Hector Martin)
- Use gpiod_set_value_cansleep() when asserting PERST# in probe
because we're allowed to sleep there (Hector Martin)
Cadence PCIe controller driver:
- Drop a runtime PM 'put' to resolve a runtime atomic count underflow
(Hans Zhang)
- Make the cadence core buildable as a module (Kishon Vijay Abraham I)
- Add cdns_pcie_host_disable() and cdns_pcie_ep_disable() for use by
loadable drivers when they are removed (Siddharth Vadapalli)
Freescale i.MX6 PCIe controller driver:
- Apply link training workaround only on IMX6Q, IMX6SX, IMX6SP
(Richard Zhu)
- Remove redundant dw_pcie_wait_for_link() from
imx_pcie_start_link(); since the DWC core does this, imx6 only
needs it when retraining for a faster link speed (Richard Zhu)
- Toggle i.MX95 core reset to align with PHY powerup (Richard Zhu)
- Set SYS_AUX_PWR_DET to work around i.MX95 ERR051624 erratum: in
some cases, the controller can't exit 'L23 Ready' through Beacon or
PERST# deassertion (Richard Zhu)
- Clear GEN3_ZRXDC_NONCOMPL to work around i.MX95 ERR051586 erratum:
controller can't meet 2.5 GT/s ZRX-DC timing when operating at 8
GT/s, causing timeouts in L1 (Richard Zhu)
- Wait for i.MX95 PLL lock before enabling controller (Richard Zhu)
- Save/restore i.MX95 LUT for suspend/resume (Richard Zhu)
Mobiveil PCIe controller driver:
- Return bool (not int) for link-up check in
mobiveil_pab_ops.link_up() and layerscape-gen4, mobiveil (Hans
Zhang)
NVIDIA Tegra194 PCIe controller driver:
- Create debugfs directory for 'aspm_state_cnt' only when
CONFIG_PCIEASPM is enabled, since there are no other entries (Hans
Zhang)
Qualcomm PCIe controller driver:
- Add OF support for parsing DT 'eq-presets-<N>gts' property for lane
equalization presets (Krishna Chaitanya Chundru)
- Read Maximum Link Width from the Link Capabilities register if DT
lacks 'num-lanes' property (Krishna Chaitanya Chundru)
- Add Physical Layer 64 GT/s Capability ID and register offsets for
8, 32, and 64 GT/s lane equalization registers (Krishna Chaitanya
Chundru)
- Add generic dwc support for configuring lane equalization presets
(Krishna Chaitanya Chundru)
- Add DT and driver support for PCIe on IPQ5018 SoC (Nitheesh Sekar)
Renesas R-Car PCIe controller driver:
- Describe endpoint BAR 4 as being fixed size (Jerome Brunet)
- Document how to obtain R-Car V4H (r8a779g0) controller firmware
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Reorder rockchip_pci_core_rsts because
reset_control_bulk_deassert() deasserts in reverse order, to fix a
link training regression (Jensen Huang)
- Mark RK3399 as being capable of raising INTx interrupts (Niklas
Cassel)
Rockchip DesignWare PCIe controller driver:
- Check only PCIE_LINKUP, not LTSSM status, to determine whether the
link is up (Shawn Lin)
- Increase N_FTS (used in L0s->L0 transitions) and enable ASPM L0s
for Root Complex and Endpoint modes (Shawn Lin)
- Hide the broken ATS Capability in rockchip_pcie_ep_init() instead
of rockchip_pcie_ep_pre_init() so it stays hidden after PERST#
resets non-sticky registers (Shawn Lin)
- Call phy_power_off() before phy_exit() in rockchip_pcie_phy_deinit()
(Diederik de Haas)
Synopsys DesignWare PCIe controller driver:
- Set PORT_LOGIC_LINK_WIDTH to one lane to make initial link training
more robust; this will not affect the intended link width if all
lanes are functional (Wenbin Yao)
- Return bool (not int) for link-up check in dw_pcie_ops.link_up()
and armada8k, dra7xx, dw-rockchip, exynos, histb, keembay,
keystone, kirin, meson, qcom, qcom-ep, rcar_gen4, spear13xx,
tegra194, uniphier, visconti (Hans Zhang)
- Add debugfs support for exposing DWC device-specific PTM context
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Make j721e buildable as a loadable and removable module (Siddharth
Vadapalli)
- Fix j721e host/endpoint dependencies that result in link failures
in some configs (Arnd Bergmann)
Device tree bindings:
- Add qcom DT binding for 'global' interrupt (PCIe controller and
link-specific events) for ipq8074, ipq8074-gen3, ipq6018, sa8775p,
sc7280, sc8180x sdm845, sm8150, sm8250, sm8350 (Manivannan
Sadhasivam)
- Add qcom DT binding for 8 MSI SPI interrupts for msm8998, ipq8074,
ipq8074-gen3, ipq6018 (Manivannan Sadhasivam)
- Add dw rockchip DT binding for rk3576 and rk3562 (Kever Yang)
- Correct indentation and style of examples in brcm,stb-pcie,
cdns,cdns-pcie-ep, intel,keembay-pcie-ep, intel,keembay-pcie,
microchip,pcie-host, rcar-pci-ep, rcar-pci-host, xilinx-versal-cpm
(Krzysztof Kozlowski)
- Convert Marvell EBU (dove, kirkwood, armada-370, armada-xp) and
armada8k from text to schema DT bindings (Rob Herring)
- Remove obsolete .txt DT bindings for content that has been moved to
schemas (Rob Herring)
- Add qcom DT binding for MHI registers in IPQ5332, IPQ6018, IPQ8074
and IPQ9574 (Varadarajan Narayanan)
- Convert v3,v360epc-pci from text to DT schema binding (Rob Herring)
- Change microchip,pcie-host DT binding to be 'dma-noncoherent' since
PolarFire may be configured that way (Conor Dooley)
Miscellaneous:
- Drop 'pci' suffix from intel_mid_pci.c filename to match similar
files (Andy Shevchenko)
- All platforms with PCI have an MMU, so add PCI Kconfig dependency
on MMU to simplify build testing and avoid inadvertent build
regressions (Arnd Bergmann)
- Update Krzysztof Wilczyński's email address in MAINTAINERS
(Krzysztof Wilczyński)
- Update Manivannan Sadhasivam's email address in MAINTAINERS
(Manivannan Sadhasivam)"
* tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (147 commits)
MAINTAINERS: Update Manivannan Sadhasivam email address
PCI: j721e: Fix host/endpoint dependencies
PCI: j721e: Add support to build as a loadable module
PCI: cadence-ep: Introduce cdns_pcie_ep_disable() helper for cleanup
PCI: cadence-host: Introduce cdns_pcie_host_disable() helper for cleanup
PCI: cadence: Add support to build pcie-cadence library as a kernel module
MAINTAINERS: Update Krzysztof Wilczyński email address
PCI: Remove unnecessary linesplit in __pci_setup_bridge()
PCI: WARN (not BUG()) when we fail to assign optional resources
PCI: Remove unused pci_printk()
PCI: qcom: Replace PERST# sleep time with proper macro
PCI: dw-rockchip: Replace PERST# sleep time with proper macro
PCI: host-common: Convert to library for host controller drivers
PCI/ERR: Remove misleading TODO regarding kernel panic
PCI: cadence: Remove duplicate message code definitions
PCI: endpoint: Align pci_epc_set_msix(), pci_epc_ops::set_msix() nr_irqs encoding
PCI: endpoint: Align pci_epc_set_msi(), pci_epc_ops::set_msi() nr_irqs encoding
PCI: endpoint: Align pci_epc_get_msix(), pci_epc_ops::get_msix() return value encoding
PCI: endpoint: Align pci_epc_get_msi(), pci_epc_ops::get_msi() return value encoding
PCI: cadence-ep: Correct PBA offset in .set_msix() callback
...
- Remove always true condition in cxl features code.
- Add verification of CHBS length for CXL 2.0
- Ignore interleave granularity when interleave ways is 1
- Add update addressing mising MODULE_DESCRIPTION for cxl_test
- A series of cleanups/refactor to prep for AMD Zen5 translate code
- Clean %pa debug printk in core/hdm.c
- Documentation updates
- Update to CXL Maturity Map
- Fixes to source linking in CXL documentation
- CXL documentation fixes, spelling corrections
- A large collection of CXL documentation for the entire CXL subsystem, including
documentation on CXL related platform and firmware notes
- Remove redundant code of cxlctl_get_supported_features()
- Series to support CXL RAS Features
- Including "Patrol Scrub Control", "Error Check Scrub", "Performance Maitenance"
and "Memory Sparing". The series connects CXL to EDAC.
-----BEGIN PGP SIGNATURE-----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=evKj
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) updates from Dave Jiang:
- Remove always true condition in cxl features code
- Add verification of CHBS length for CXL 2.0
- Ignore interleave granularity when interleave ways is 1
- Add update addressing mising MODULE_DESCRIPTION for cxl_test
- A series of cleanups/refactor to prep for AMD Zen5 translate code
- Clean %pa debug printk in core/hdm.c
- Documentation updates:
- Update to CXL Maturity Map
- Fixes to source linking in CXL documentation
- CXL documentation fixes, spelling corrections
- A large collection of CXL documentation for the entire CXL
subsystem, including documentation on CXL related platform and
firmware notes
- Remove redundant code of cxlctl_get_supported_features()
- Series to support CXL RAS Features
- Including "Patrol Scrub Control", "Error Check Scrub",
"Performance Maitenance" and "Memory Sparing". The series
connects CXL to EDAC.
* tag 'cxl-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (53 commits)
cxl/edac: Add CXL memory device soft PPR control feature
cxl/edac: Add CXL memory device memory sparing control feature
cxl/edac: Support for finding memory operation attributes from the current boot
cxl/edac: Add support for PERFORM_MAINTENANCE command
cxl/edac: Add CXL memory device ECS control feature
cxl/edac: Add CXL memory device patrol scrub control feature
cxl: Update prototype of function get_support_feature_info()
EDAC: Update documentation for the CXL memory patrol scrub control feature
cxl/features: Remove the inline specifier from to_cxlfs()
cxl/feature: Remove redundant code of get supported features
docs: ABI: Fix "firwmare" to "firmware"
cxl/Documentation: Fix typo in sysfs write_bandwidth attribute path
cxl: doc/linux/access-coordinates Update access coordinates calculation methods
cxl: docs/platform/acpi/srat Add generic target documentation
cxl: docs/platform/cdat reference documentation
Documentation: Update the CXL Maturity Map
cxl: Sync up the driver-api/cxl documentation
cxl: docs - add self-referencing cross-links
cxl: docs/allocation/hugepages
cxl: docs/allocation/reclaim
...
This is a restructure of the IPMI driver, mostly to remove SRCU. The
locking had issues, and they were not going to be straightforward to
fix. Plus it used tons of memory and was generally a pain.
Most of this moves handling of messages out of bh and interrupt context
and runs it in thread context. Then getting rid of SRCU is easy.
This also has a minor cleanup to remove a warning on newer GCCs and to
fix some documentation.
-----BEGIN PGP SIGNATURE-----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=e8Rg
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.16-1' of https://github.com/cminyard/linux-ipmi
Pull IPMI updates from Corey Minyard:
"Restructure the IPMI driver.
This is a restructure of the IPMI driver, mostly to remove SRCU. The
locking had issues, and they were not going to be straightforward to
fix. Plus it used tons of memory and was generally a pain.
Most of this moves handling of messages out of bh and interrupt
context and runs it in thread context. Then getting rid of SRCU is
easy.
This also has a minor cleanup to remove a warning on newer GCCs and to
fix some documentation"
* tag 'for-linus-6.16-1' of https://github.com/cminyard/linux-ipmi: (26 commits)
docs: ipmi: fix spelling and grammar mistakes
ipmi:msghandler: Fix potential memory corruption in ipmi_create_user()
ipmi:watchdog: Use the new interface for panic messages
ipmi:msghandler: Export and fix panic messaging capability
Documentation:ipmi: Remove comments about interrupt level
ipmi:ssif: Fix a shutdown race
ipmi:msghandler: Don't deliver messages to deleted users
ipmi:si: Rework startup of IPMI devices
ipmi:msghandler: Add a error return from unhandle LAN cmds
ipmi:msghandler: Shut down lower layer first at unregister
ipmi:msghandler: Remove proc_fs.h
ipmi:msghandler: Don't check for shutdown when returning responses
ipmi:msghandler: Don't acquire a user refcount for queued messages
ipmi:msghandler: Fix locking around users and interfaces
ipmi:msghandler: Remove some user level processing in panic mode
ipmi: Add a note about the pretimeout callback
ipmi:watchdog: Change lock to mutex
ipmi:msghandler: Remove srcu for the ipmi_interfaces list
ipmi:msghandler: Remove srcu from the ipmi user structure
ipmi:msghandler: Use the system_wq, not system_bh_wq
...
- Add a general sysfs scheme for publishing "Measurement" values
provided by the architecture's TEE Security Manager. Use it to publish
TDX "Runtime Measurement Registers" ("RTMRs") that either maintain a
hash of stored values (similar to a TPM PCR) or provide statically
provisioned data. These measurements are validated by a relying party.
- Reorganize the drivers/virt/coco/ directory for "host" and "guest"
shared infrastructure.
- Fix a configfs-tsm-report unregister bug
- With CONFIG_TSM_MEASUREMENTS joining CONFIG_TSM_REPORTS and in
anticipation of more shared "TSM" infrastructure arriving, rename the
maintainer entry to "TRUSTED SECURITY MODULE (TSM) INFRASTRUCTURE".
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCaDj38gAKCRDfioYZHlFs
Z3EKAQC2K7RgoufBlLv4C79W8IGiUirKKQvtY9aiC7s/W8R4UwEApwV5gXQx2ImN
cEIIkAkVI2h9wJ9LHxyr3R5XfZPBGgA=
=2fTp
-----END PGP SIGNATURE-----
Merge tag 'tsm-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm
Pull trusted security manager (TSM) updates from Dan Williams:
- Add a general sysfs scheme for publishing "Measurement" values
provided by the architecture's TEE Security Manager. Use it to
publish TDX "Runtime Measurement Registers" ("RTMRs") that either
maintain a hash of stored values (similar to a TPM PCR) or provide
statically provisioned data. These measurements are validated by a
relying party.
- Reorganize the drivers/virt/coco/ directory for "host" and "guest"
shared infrastructure.
- Fix a configfs-tsm-report unregister bug
- With CONFIG_TSM_MEASUREMENTS joining CONFIG_TSM_REPORTS and in
anticipation of more shared "TSM" infrastructure arriving, rename the
maintainer entry to "TRUSTED SECURITY MODULE (TSM) INFRASTRUCTURE".
* tag 'tsm-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm:
tsm-mr: Fix init breakage after bin_attrs constification by scoping non-const pointers to init phase
sample/tsm-mr: Fix missing static for sample_report
virt: tdx-guest: Transition to scoped_cond_guard for mutex operations
virt: tdx-guest: Refactor and streamline TDREPORT generation
virt: tdx-guest: Expose TDX MRs as sysfs attributes
x86/tdx: tdx_mcall_get_report0: Return -EBUSY on TDCALL_OPERAND_BUSY error
x86/tdx: Add tdx_mcall_extend_rtmr() interface
tsm-mr: Add tsm-mr sample code
tsm-mr: Add TVM Measurement Register support
configfs-tsm-report: Fix NULL dereference of tsm_ops
coco/guest: Move shared guest CC infrastructure to drivers/virt/coco/guest/
configfs-tsm: Namespace TSM report symbols
- Add Platform Temperature Control (PTC) support to the Intel int340x
thermal driver (Srinivas Pandruvada).
- Make the Hisilicon thermal driver compile by default when ARCH_HISI
is set (Krzysztof Kozlowski).
- Clean up printk() format by using %pC instead of %pCn in the bcm2835
thermal driver (Luca Ceresoli).
- Fix variable name coding style in the AmLogic thermal driver (Enrique
Isidoro Vazquez Ramos).
- Fix missing debugfs entry removal on failure by using the devm_
variant in the LVTS thermal driver (AngeloGioacchino Del Regno).
- Remove the unused lvts_debugfs_exit() function as the devm_ variant
introduced before takes care of removing the debugfs entry in the
LVTS driver (Arnd Bergmann).
- Add the Airoha EN7581 thermal sensor support along with its DT
bindings (Christian Marangi).
- Add ipq5018 compatible string DT binding, cleanup and add its suppot
to the QCom Tsens thermal driver (Sricharan Ramabadhran, George
Moussalem).
- Fix comments typos in the Airoha driver (Christian Marangi, Colin Ian
King).
- Address a sparse warning by making a local variable static in the
QCom thermal driver (George Moussalem).
- Fix the usage of the _SCP control method in the driver for ACPI
thermal zones (Armin Wolf).
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmg0jdQSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1uPkH/2hZsBDB0sKr9nLN+V1tprdhflZxSRIB
qD65DxWXJ6pumXctaO6WYD1Vf8drO0X3kOcdpHrb+R4Im8qBz290FoUPi3FzUmNM
Qq6erheB/h4FP6EFKJmf5vWCn23nLAT0YtVS6yP9+4DKrqAoGAIlVjxcKc6+tcf/
ZBPWNUNuis+Xk6FD300X2gE1OIh5ZfIvKSh/RnExIqAqRYV8rtGCUdsqid4Rn+Jb
4mzDVnXW5TiJpfoRf5/0gxMYtcTcOIxbtAPAOnXw+4aJZtNK/oN5AqLbf9TNz1vM
ZSHBR0kPDxIa0ppT8SfvzPL5gE6lrxx05WDOvr7PEWHG1GzSFIPkMNc=
=Un/6
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add support for a new feature, Platform Temperature Control
(PTC), to the Intel int340x thermal driver, add support for the Airoha
EN7581 thermal sensor and the IPQ5018 platform, fix up the ACPI
thermal zones handling, fix other assorted issues and clean up code
Specifics:
- Add Platform Temperature Control (PTC) support to the Intel int340x
thermal driver (Srinivas Pandruvada)
- Make the Hisilicon thermal driver compile by default when ARCH_HISI
is set (Krzysztof Kozlowski)
- Clean up printk() format by using %pC instead of %pCn in the
bcm2835 thermal driver (Luca Ceresoli)
- Fix variable name coding style in the AmLogic thermal driver
(Enrique Isidoro Vazquez Ramos)
- Fix missing debugfs entry removal on failure by using the devm_
variant in the LVTS thermal driver (AngeloGioacchino Del Regno)
- Remove the unused lvts_debugfs_exit() function as the devm_ variant
introduced before takes care of removing the debugfs entry in the
LVTS driver (Arnd Bergmann)
- Add the Airoha EN7581 thermal sensor support along with its DT
bindings (Christian Marangi)
- Add ipq5018 compatible string DT binding, cleanup and add its
suppot to the QCom Tsens thermal driver (Sricharan Ramabadhran,
George Moussalem)
- Fix comments typos in the Airoha driver (Christian Marangi, Colin
Ian King)
- Address a sparse warning by making a local variable static in the
QCom thermal driver (George Moussalem)
- Fix the usage of the _SCP control method in the driver for ACPI
thermal zones (Armin Wolf)"
* tag 'thermal-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: qcom: ipq5018: make ops_ipq5018 struct static
thermal/drivers/airoha: Fix spelling mistake "calibrarion" -> "calibration"
ACPI: thermal: Execute _SCP before reading trip points
ACPI: OSI: Stop advertising support for "3.0 _SCP Extensions"
thermal/drivers/airoha: Fix spelling mistake
thermal/drivers/qcom/tsens: Add support for IPQ5018 tsens
thermal/drivers/qcom/tsens: Add support for tsens v1 without RPM
thermal/drivers/qcom/tsens: Update conditions to strictly evaluate for IP v2+
dt-bindings: thermal: qcom-tsens: Add ipq5018 compatible
thermal/drivers: Add support for Airoha EN7581 thermal sensor
dt-bindings: thermal: Add support for Airoha EN7581 thermal sensor
thermal/drivers/mediatek/lvts: Remove unused lvts_debugfs_exit
thermal/drivers/mediatek/lvts: Fix debugfs unregister on failure
thermal/drivers/amlogic: Rename Uptat to uptat to follow kernel coding style
vsprintf: remove redundant and unused %pCn format specifier
thermal/drivers/bcm2835: Use %pC instead of %pCn
thermal/drivers/hisi: Do not enable by default during compile testing
thermal: int340x: processor_thermal: Platform temperature control documentation
thermal: intel: int340x: Enable platform temperature control
thermal: intel: int340x: Add platform temperature control interface
GPIO core:
- use more lock guards where applicable
- refactor GPIO ACPI code and shrink it in the process by 8%
- move GPIO ACPI quirks into a separate file
- remove unneeded #ifdef
- convert GPIO devres helpers to using devm_add_action() where applicable
which shrinks and simplifies the code
- refactor GPIO descriptor validation in GPIO consumer interfaces
- don't allow setting values on input lines in the GPIO core which will
take off the burden from GPIO drivers of checking this down the line
- provide gpiod_is_equal() as a way of safely comparing two GPIO
descriptors (the only current user is in regulator core)
New drivers:
- add the GPIO module for the max77759 multifunction device
- add the GPIO driver for the VeriSilicon BLZP1600 GPIO controller
- add the GPIO driver for the Spacemit K1 SoC
Driver improvements:
- convert more drivers to using the new GPIO line value setter callbacks
- convert more drivers to making the irq_chip immutable as is recommended
by the interrupt subsystem
- extend build testing coverage by enabling more modules to be built with
COMPILE_TEST=y
- extend the gpio-aggregator module with a configfs interface that makes
the setup easier for user-space than the existing driver-level sysfs
attributes and also adds more advanced configuration features (such as
referring to aggregated lines by their original names or modifying
their names as exposed by the aggregated chip)
- add a missing mutex_destroy() in gpio-imx-scu
- add an OF polarity quirk for s5m8767
- allow building gpio-vf610 as a loadable module
- make gpio-mxc not hardcode its GPIO base number with GPIO SYSFS
interface disabled (another small step towards getting rid of the global
GPIO numberspace)
- add support for level-triggered interrupts to gpio-pca953x
- don't double-check the ngpios property in gpio-ds4520 as GPIO core
already does it
- don't double-check the number of GPIOs in gpio-imx-scu as GPIO core
already does it
- remove unused callbacks from gpio-max3191x
DT bindings:
- add device-tree bindings for max77759, spacemit,k1 and blzp1600 (new
drivers added this cycle)
- document more properties for gpio-vf610 and gpio-tegra186
- document a new pca95xx variant
- fix style of examples in several GPIO DT-binding documents
Misc:
- TODO list updates
-----BEGIN PGP SIGNATURE-----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=PQqp
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have three new drivers, some refactoring in the GPIO core, lots of
various changes across many drivers, new configfs interface for the
virtual gpio-aggregator module and DT-bindings updates.
The treewide conversion of GPIO drivers to using the new value setter
callbacks is ongoing with another round of GPIO drivers updated. You
will also see these commits coming in from other subsystems as with
the relevant changes merged into mainline last cycle, I've started
converting GPIO providers located elsewhere than drivers/gpio/.
GPIO core:
- use more lock guards where applicable
- refactor GPIO ACPI code and shrink it in the process by 8%
- move GPIO ACPI quirks into a separate file
- remove unneeded #ifdef
- convert GPIO devres helpers to using devm_add_action() where
applicable which shrinks and simplifies the code
- refactor GPIO descriptor validation in GPIO consumer interfaces
- don't allow setting values on input lines in the GPIO core which
will take off the burden from GPIO drivers of checking this down
the line
- provide gpiod_is_equal() as a way of safely comparing two GPIO
descriptors (the only current user is in regulator core)
New drivers:
- add the GPIO module for the max77759 multifunction device
- add the GPIO driver for the VeriSilicon BLZP1600 GPIO controller
- add the GPIO driver for the Spacemit K1 SoC
Driver improvements:
- convert more drivers to using the new GPIO line value setter
callbacks
- convert more drivers to making the irq_chip immutable as is
recommended by the interrupt subsystem
- extend build testing coverage by enabling more modules to be built
with COMPILE_TEST=y
- extend the gpio-aggregator module with a configfs interface that
makes the setup easier for user-space than the existing
driver-level sysfs attributes and also adds more advanced
configuration features (such as referring to aggregated lines by
their original names or modifying their names as exposed by the
aggregated chip)
- add a missing mutex_destroy() in gpio-imx-scu
- add an OF polarity quirk for s5m8767
- allow building gpio-vf610 as a loadable module
- make gpio-mxc not hardcode its GPIO base number with GPIO SYSFS
interface disabled (another small step towards getting rid of the
global GPIO numberspace)
- add support for level-triggered interrupts to gpio-pca953x
- don't double-check the ngpios property in gpio-ds4520 as GPIO core
already does it
- don't double-check the number of GPIOs in gpio-imx-scu as GPIO core
already does it
- remove unused callbacks from gpio-max3191x
DT bindings:
- add device-tree bindings for max77759, spacemit,k1 and blzp1600
(new drivers added this cycle)
- document more properties for gpio-vf610 and gpio-tegra186
- document a new pca95xx variant
- fix style of examples in several GPIO DT-binding documents
Misc:
- TODO list updates"
* tag 'gpio-updates-for-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (123 commits)
gpio: timberdale: select GPIOLIB_IRQCHIP
gpio: lpc18xx: select GPIOLIB_IRQCHIP
gpio: grgpio: select GPIOLIB_IRQCHIP
gpio: bcm-kona: select GPIOLIB_IRQCHIP
dt-bindings: gpio: vf610: add ngpios and gpio-reserved-ranges
gpio: davinci: select GPIOLIB_IRQCHIP
gpiolib-acpi: Update file references in the Documentation and MAINTAINERS
gpiolib: acpi: Move quirks to a separate file
gpiolib: acpi: Add acpi_gpio_need_run_edge_events_on_boot() getter
gpiolib: acpi: Handle deferred list via new API
gpiolib: acpi: Make sure we fill struct acpi_gpio_info
gpiolib: acpi: Switch to use enum in acpi_gpio_in_ignore_list()
gpiolib: acpi: Use temporary variable for struct acpi_gpio_info
gpiolib: remove unneeded #ifdef
gpio: mpc8xxx: select GPIOLIB_IRQCHIP
gpio: pxa: select GPIOLIB_IRQCHIP
gpio: pxa: Make irq_chip immutable
gpio: timberdale: Make irq_chip immutable
gpio: xgene-sb: Make irq_chip immutable
gpio: davinci: Make irq_chip immutable
...
- The most significant change is the replacement of the old kernel-doc
script (a monstrous collection of Perl regexes that predates the Git era)
with a Python reimplementation. That, too, is a horrifying collection of
regexes, but in a much cleaner and more maintainable structure that
integrates far better with the Sphinx build system.
This change has been in linux-next for the full 6.15 cycle; the small
number of problems that turned up have been addressed, seemingly to
everybody's satisfaction. The Perl kernel-doc script remains in tree (as
scripts/kernel-doc.pl) and can be used with a command-line option if need
be. Unless some reason to keep it around materializes, it will probably
go away in 6.17.
Credit goes to Mauro Carvalho Chehab for doing all this work.
- Some RTLA documentation updates
- A handful of Chinese translations
- The usual collection of typo fixes, general updates, etc.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmg0j/IPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Yu7sH/1w2LtO8XB/KTRNmuz3tV6KzGtDvQVwqgxB2
X8bbeJlBtYenvuak66RjCfucOh7Y8Ni3UN0G2BGa67KBAxmZEYc6u+IF4SrJUg5g
DuS6+ZXgqV4TrjWMRof5LtPS8KbNJLGnqgxSVdEPSBV0jJ13r3gb3/e7X06iNAKR
X4Nq+h5aa1tCwZTkPOSHHQn4qm3Tb1LQreDSn8gnBn6e8nVJIakNlwaVYkClhI9B
byvItInv32LPAXPDkcEWITvLNUTiMobTyfBYHOD6i3nImQ+j4ZiMMmOUjiB+0jDO
UQDvoUa46ipXkLBsBOrYEkM/iKXBawMwTa3CcudxR4scvVgATJs=
=BQ9X
-----END PGP SIGNATURE-----
Merge tag 'docs-6.16' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"A moderately busy cycle for documentation this time around:
- The most significant change is the replacement of the old
kernel-doc script (a monstrous collection of Perl regexes that
predates the Git era) with a Python reimplementation. That, too, is
a horrifying collection of regexes, but in a much cleaner and more
maintainable structure that integrates far better with the Sphinx
build system.
This change has been in linux-next for the full 6.15 cycle; the
small number of problems that turned up have been addressed,
seemingly to everybody's satisfaction. The Perl kernel-doc script
remains in tree (as scripts/kernel-doc.pl) and can be used with a
command-line option if need be. Unless some reason to keep it
around materializes, it will probably go away in 6.17.
Credit goes to Mauro Carvalho Chehab for doing all this work.
- Some RTLA documentation updates
- A handful of Chinese translations
- The usual collection of typo fixes, general updates, etc"
* tag 'docs-6.16' of git://git.lwn.net/linux: (85 commits)
Docs: doc-guide: update sphinx.rst Sphinx version number
docs: doc-guide: clarify latest theme usage
Documentation/scheduler: Fix typo in sched-stats domain field description
scripts: kernel-doc: prevent a KeyError when checking output
docs: kerneldoc.py: simplify exception handling logic
MAINTAINERS: update linux-doc entry to cover new Python scripts
docs: align with scripts/syscall.tbl migration
Documentation: NTB: Fix typo
Documentation: ioctl-number: Update table intro
docs: conf.py: drop backward support for old Sphinx versions
Docs: driver-api/basics: add kobject_event interfaces
Docs: relay: editing cleanups
docs: fix "incase" typo in coresight/panic.rst
Fix spelling error for 'parallel'
docs: admin-guide: fix typos in reporting-issues.rst
docs: dmaengine: add explanation for DMA_ASYNC_TX capability
Documentation: leds: improve readibility of multicolor doc
docs: fix typo in firmware-related section
docs: Makefile: Inherit PYTHONPYCACHEPREFIX setting as env variable
Documentation: ioctl-number: Update outdated submission info
...
Board files are deprecated by DT, and the last user of
nvmem_add_cell_table() was removed by commit 2af4fcc0d3 ("ARM:
davinci: remove unused board support") in v6.3. Hence remove all
support for nvmem cell tables, and update the documentation.
Device drivers can still register a single cell using
nvmem_add_one_cell() (which was not documented before).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://lore.kernel.org/r/20250509122452.11827-2-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The recent changes in the gpiolib-acpi.c need also updates in the Documentation
and MAINTAINERS. Do the necessary changes here.
Fixes: babb541af627 ("gpiolib: acpi: Move quirks to a separate file")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20250516193436.09bdf8cc@canb.auug.org.au
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fix 'peace' to 'piece' in the ntb documentation
Signed-off-by: Utkarsh Tiwari <utkarsh02t@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250519080248.648971-1-utkarsh02t@gmail.com>
Add the kernel-doc comments from lib/kobject_uevent.c to the
"Kernel objects manipulation" section of driver API Basics.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250509005538.685678-1-rdunlap@infradead.org>
pcim_enable_device() is not related anymore to switching the mode of
operation of any functions. It merely sets up a devres callback for
automatically disabling the PCI device on driver detach.
Adjust the function's documentation.
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250519112959.25487-4-phasta@kernel.org
Corrected various spelling and grammatical mistakes in
Documentation/driver-api/ipmi.rst to improve readability.
No changes to the technical content has been made.
Signed-off-by: Praveen Balakrishnan <praveen.balakrishnan@magd.ox.ac.uk>
Message-ID: <20250515234757.19710-1-praveen.balakrishnan@magd.ox.ac.uk>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Corey Minyard <corey@minyard.net>
Add documentation on how to calculate the access coordinates for a given
CXL region in detail.
Reviewed-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20250515000923.2590820-4-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Add description in the SRAT document to describe the Generic Port
Affinity sub-table.
Reviewed-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20250515000923.2590820-3-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
pmem.c regs.c mbox.c identifiers were missing. Add them to
memory-devices.rst following their respective DOC comment includes.
Two acpi.c identifiers were available, but not used in kernel-doc's:
1) Add add_cxl_resources to memory-devices.rst and fix up the Sphinx
complaint on the ascii art by escaping it.
2) Add cxl_acpi_evaluate_qtg_dsm to access-coordinates.rst.
core/features.c is new. Add a "DOC: cxl features" comment to the
source and identifiers to memory_devices.rst.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/20250513215813.1419645-1-alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Add some crosslinks between pages in the CXL docs - mostly to the
ACPI tables.
Suggested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Gregory Price <gourry@gourry.net>
Link: https://patch.msgid.link/20250512162134.3596150-18-gourry@gourry.net
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Document some interesting interactions that occur when exposing CXL
memory capacity to page allocator.
Signed-off-by: Gregory Price <gourry@gourry.net>
Link: https://patch.msgid.link/20250512162134.3596150-15-gourry@gourry.net
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Linus Torvalds
Breno Leitao
Mauro Carvalho Chehab
Srinivas Pandruvada
Jason Gunthorpe
Yue Haibing
Levente Révész
Andy Shevchenko
Armin Wolf
Ilpo Järvinen
Jacopo Mondi
Bagas Sanjaya
Dan Williams
Gregory Price
Ivan Vecera
Johannes Weiner
Marneni PoornaChandu
Fabio M. De Francesco
Rakuram Eswaran
Hans Verkuil
Linus Walleij
Alex Tran
Christian Bruel
Dmitry Torokhov
David Disseldorp
Ranganath V N
Mehdi Djait
Laurent Pinchart
Alison Schofield
Damien Le Moal
Uwe Kleine-König
Alok Tiwari
Nai-Chen Cheng
Sakari Ailus
Arkadiusz Kubalewski
Jiri Slaby (SUSE)
Dr. David Alan Gilbert
Bard Liao
Geert Uytterhoeven
Utkarsh Tiwari
Randy Dunlap
Philipp Stanner
Praveen Balakrishnan
Dave Jiang