Curve25519 is used only via the library API, not the crypto_kpp API. In
preparation for removing the unused crypto_kpp API for Curve25519,
remove the tests for the "curve25519" kpp from crypto/testmgr.c.
Note that these tests just duplicated lib/crypto/curve25519-selftest.c,
which uses the same list of test vectors. So they didn't really provide
any additional value.
Link: https://lore.kernel.org/r/20250906213523.84915-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Curve25519 is used only via the library API, not the crypto_kpp API. In
preparation for removing the unused crypto_kpp API for Curve25519,
remove the unused "curve25519-x86" kpp algorithm.
Note that the underlying x86_64 optimized Curve25519 code remains fully
supported and accessible via the library API.
It's also worth noting that even if the kpp support for Curve25519 comes
back later, there is no need for arch-specific kpp glue code like this,
as a single kpp algorithm that wraps the library API is sufficient.
Link: https://lore.kernel.org/r/20250906213523.84915-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Curve25519 is used only via the library API, not the crypto_kpp API. In
preparation for removing the unused crypto_kpp API for Curve25519,
remove the unused "curve25519-ppc64le" kpp algorithm.
Note that the underlying PowerPC optimized Curve25519 code remains fully
supported and accessible via the library API.
It's also worth noting that even if the kpp support for Curve25519 comes
back later, there is no need for arch-specific kpp glue code like this,
as a single kpp algorithm that wraps the library API is sufficient.
Link: https://lore.kernel.org/r/20250906213523.84915-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Curve25519 is used only via the library API, not the crypto_kpp API. In
preparation for removing the unused crypto_kpp API for Curve25519,
remove the unused "curve25519-neon" kpp algorithm.
Note that the underlying NEON optimized Curve25519 code remains fully
supported and accessible via the library API.
It's also worth noting that even if the kpp support for Curve25519 comes
back later, there is no need for arch-specific kpp glue code like this,
as a single kpp algorithm that wraps the library API is sufficient.
Link: https://lore.kernel.org/r/20250906213523.84915-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Curve25519 is used only via the library API, not the crypto_kpp API. In
preparation for removing the unused crypto_kpp API for Curve25519,
remove the unused "hpre-curve25519" kpp algorithm.
Cc: Longfang Liu <liulongfang@huawei.com>
Cc: Zhiqi Song <songzhiqi1@huawei.com>
Link: https://lore.kernel.org/r/20250906213523.84915-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add a KUnit test suite for BLAKE2s. Most of the core test logic is in
the previously-added hash-test-template.h. This commit just adds the
actual KUnit suite, commits the generated test vectors to the tree so
that gen-hash-testvecs.py won't have to be run at build time, and adds a
few BLAKE2s-specific test cases.
This is the replacement for blake2s-selftest, which an earlier commit
removed. Improvements over blake2s-selftest include integration with
KUnit, more comprehensive test cases, and support for benchmarking.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250827151131.27733-13-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
As was done with the other algorithms, reorganize the BLAKE2s code so
that the generic implementation and the arch-specific "glue" code is
consolidated into a single translation unit, so that the compiler will
inline the functions and automatically decide whether to include the
generic code in the resulting binary or not.
Similarly, also consolidate the build rules into
lib/crypto/{Makefile,Kconfig}. This removes the last uses of
lib/crypto/{arm,x86}/{Makefile,Kconfig}, so remove those too.
Don't keep the !KMSAN dependency. It was needed only for other
algorithms such as ChaCha that initialize memory from assembly code.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250827151131.27733-12-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Move blake2s_compress_generic() from blake2s-generic.c to blake2s.c.
For now it's still guarded by CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC, but
this prepares for changing it to a 'static __maybe_unused' function and
just using the compiler to automatically decide its inclusion.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250827151131.27733-11-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
When support for a crypto algorithm is enabled, the arch-optimized
implementation of that algorithm should be enabled too. We've learned
this the hard way many times over the years: people regularly forget to
enable the arch-optimized implementations of the crypto algorithms,
resulting in significant performance being left on the table.
Currently, BLAKE2s support is always enabled ('obj-y'), since random.c
uses it. Therefore, the arch-optimized BLAKE2s code, which exists for
ARM and x86_64, should be always enabled too. Let's do that.
Note that the effect on kernel image size is very small and should not
be a concern. On ARM, enabling CRYPTO_BLAKE2S_ARM actually *shrinks*
the kernel size by about 1200 bytes, since the ARM-optimized
blake2s_compress() completely replaces the generic blake2s_compress().
On x86_64, enabling CRYPTO_BLAKE2S_X86 increases the kernel size by
about 1400 bytes, as the generic blake2s_compress() is still included as
a fallback; however, for context, that is only about a quarter the size
of the generic blake2s_compress(). The x86_64 optimized BLAKE2s code
uses much less icache at runtime than the generic code.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250827151131.27733-10-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Save 480 bytes of .rodata by replacing the .long constants with .bytes,
and using the vpmovzxbd instruction to expand them.
Also update the code to do the loads before incrementing %rax rather
than after. This avoids the need for the first load to use an offset.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250827151131.27733-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Consolidate the ChaCha code into a single module (excluding
chacha-block-generic.c which remains always built-in for random.c),
similar to various other algorithms:
- Each arch now provides a header file lib/crypto/$(SRCARCH)/chacha.h,
replacing lib/crypto/$(SRCARCH)/chacha*.c. The header defines
chacha_crypt_arch() and hchacha_block_arch(). It is included by
lib/crypto/chacha.c, and thus the code gets built into the single
libchacha module, with improved inlining in some cases.
- Whether arch-optimized ChaCha is buildable is now controlled centrally
by lib/crypto/Kconfig instead of by lib/crypto/$(SRCARCH)/Kconfig.
The conditions for enabling it remain the same as before, and it
remains enabled by default.
- Any additional arch-specific translation units for the optimized
ChaCha code, such as assembly files, are now compiled by
lib/crypto/Makefile instead of lib/crypto/$(SRCARCH)/Makefile.
This removes the last use for the Makefile and Kconfig files in the
arm64, mips, powerpc, riscv, and s390 subdirectories of lib/crypto/. So
also remove those files and the references to them.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250827151131.27733-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Rename libchacha.c to chacha.c to make the naming consistent with other
algorithms and allow additional source files to be added to the
libchacha module. This file currently contains chacha_crypt_generic(),
but it will soon be updated to contain chacha_crypt().
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250827151131.27733-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Rename chacha.c to chacha-block-generic.c to free up the name chacha.c
for the high-level API entry points (chacha_crypt() and
hchacha_block()), similar to the other algorithms.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250827151131.27733-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
For the "chacha20", "xchacha20", and "xchacha12" skcipher algorithms,
instead of registering "*-generic" drivers as well as conditionally
registering "*-$(ARCH)" drivers, instead just register "*-lib" drivers.
These just use the regular library functions, so they just do the right
thing and are fully accelerated when supported by the CPU.
This eliminates the need for the ChaCha library to support
chacha_crypt_generic() and hchacha_block_generic() as part of its
external interface. A later commit will make chacha_crypt_generic() a
static function.
Since this commit removes several "*-generic" driver names which
crypto/testmgr.c expects to exist, update testmgr.c accordingly.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250827151131.27733-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Since v6.15, CRYPTO_CHACHA20_NEON is a hidden option and is selected
automatically. Therefore, assigning a value to it in a defconfig no
longer has any effect. Remove it from all files that did this.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250827151131.27733-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
This is a straight import of the OpenSSL/CRYPTOGAMS Poly1305
implementation for riscv authored by Andy Polyakov. The file
'poly1305-riscv.pl' is taken straight from
https://github.com/dot-asm/cryptogams commit
5e3fba73576244708a752fa61a8e93e587f271bb. This patch was tested on
SpacemiT X60, with 2~2.5x improvement over generic implementation.
Signed-off-by: Chunyan Zhang <zhangchunyan@iscas.ac.cn>
Signed-off-by: Zhihang Shao <zhihang.shao.iscas@gmail.com>
[EB: ported to lib/crypto/riscv/]
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250829152513.92459-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Consolidate the Poly1305 code into a single module, similar to various
other algorithms (SHA-1, SHA-256, SHA-512, etc.):
- Each arch now provides a header file lib/crypto/$(SRCARCH)/poly1305.h,
replacing lib/crypto/$(SRCARCH)/poly1305*.c. The header defines
poly1305_block_init(), poly1305_blocks(), poly1305_emit(), and
optionally poly1305_mod_init_arch(). It is included by
lib/crypto/poly1305.c, and thus the code gets built into the single
libpoly1305 module, with improved inlining in some cases.
- Whether arch-optimized Poly1305 is buildable is now controlled
centrally by lib/crypto/Kconfig instead of by
lib/crypto/$(SRCARCH)/Kconfig. The conditions for enabling it remain
the same as before, and it remains enabled by default. (The PPC64 one
remains unconditionally disabled due to 'depends on BROKEN'.)
- Any additional arch-specific translation units for the optimized
Poly1305 code, such as assembly files, are now compiled by
lib/crypto/Makefile instead of lib/crypto/$(SRCARCH)/Makefile.
A special consideration is needed because the Adiantum code uses the
poly1305_core_*() functions directly. For now, just carry forward that
approach. This means retaining the CRYPTO_LIB_POLY1305_GENERIC kconfig
symbol, and keeping the poly1305_core_*() functions in separate
translation units. So it's not quite as streamlined I've done with the
other hash functions, but we still get a single libpoly1305 module.
Note: to see the diff from the arm, arm64, and x86 .c files to the new
.h files, view this commit with 'git show -M10'.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250829152513.92459-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Drop 'inline' from all the *_mod_init_arch() functions so that the
compiler will warn about any bugs where they are unused due to not being
wired up properly. (There are no such bugs currently, so this just
establishes a more robust convention for the future. Of course, these
functions also tend to get inlined anyway, regardless of the keyword.)
Link: https://lore.kernel.org/r/20250816020457.432040-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add a KUnit test suite for the MD5 library functions, including the
corresponding HMAC support. The core test logic is in the
previously-added hash-test-template.h. This commit just adds the actual
KUnit suite, and it adds the generated test vectors to the tree so that
gen-hash-testvecs.py won't have to be run at build time.
Link: https://lore.kernel.org/r/20250805222855.10362-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reimplement crypto/md5.c on top of the new MD5 library functions. Also
add support for HMAC-MD5, again just wrapping the library functions.
This closely mirrors crypto/sha1.c.
Link: https://lore.kernel.org/r/20250805222855.10362-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Instead of exposing the sparc-optimized MD5 code via sparc-specific
crypto_shash algorithms, instead just implement the md5_blocks() library
function. This is much simpler, it makes the MD5 library functions be
sparc-optimized, and it fixes the longstanding issue where the
sparc-optimized MD5 code was disabled by default. MD5 still remains
available through crypto_shash, but individual architectures no longer
need to handle it.
Note: to see the diff from arch/sparc/crypto/md5_glue.c to
lib/crypto/sparc/md5.h, view this commit with 'git show -M10'.
Link: https://lore.kernel.org/r/20250805222855.10362-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Instead of exposing the powerpc-optimized MD5 code via powerpc-specific
crypto_shash algorithms, instead just implement the md5_blocks() library
function. This is much simpler, it makes the MD5 library functions be
powerpc-optimized, and it fixes the longstanding issue where the
powerpc-optimized MD5 code was disabled by default. MD5 still remains
available through crypto_shash, but individual architectures no longer
need to handle it.
Link: https://lore.kernel.org/r/20250805222855.10362-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Since octeon-crypto.c is the only remaining source file in
arch/mips/cavium-octeon/crypto/, move it into its parent directory
arch/mips/cavium-octeon/. Then remove the directory
arch/mips/cavium-octeon/crypto/, including its Makefile.
Link: https://lore.kernel.org/r/20250805222855.10362-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Instead of exposing the mips-optimized MD5 code via mips-specific
crypto_shash algorithms, instead just implement the md5_blocks() library
function. This is much simpler, it makes the MD5 library functions be
mips-optimized, and it fixes the longstanding issue where the
mips-optimized MD5 code was disabled by default. MD5 still remains
available through crypto_shash, but individual architectures no longer
need to handle it.
Note: to see the diff from arch/mips/cavium-octeon/crypto/octeon-md5.c
to lib/crypto/mips/md5.h, view this commit with 'git show -M10'.
Link: https://lore.kernel.org/r/20250805222855.10362-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add library functions for MD5, including HMAC support. The MD5
implementation is derived from crypto/md5.c. This closely mirrors the
corresponding SHA-1 and SHA-2 changes.
Like SHA-1 and SHA-2, support for architecture-optimized MD5
implementations is included. I originally proposed dropping those, but
unfortunately there is an AF_ALG user of the PowerPC MD5 code
(https://lore.kernel.org/r/c4191597-341d-4fd7-bc3d-13daf7666c41@csgroup.eu/),
and dropping that code would be viewed as a performance regression. We
don't add new software algorithm implementations purely for AF_ALG, as
escalating to kernel mode merely to do calculations that could be done
in userspace is inefficient and is completely the wrong design. But
since this one already existed, it gets grandfathered in for now. An
objection was also raised to dropping the SPARC64 MD5 code because it
utilizes the CPU's direct support for MD5, although it remains unclear
that anyone is using that. Regardless, we'll keep these around for now.
Note that while MD5 is a legacy algorithm that is vulnerable to
practical collision attacks, it still has various in-kernel users that
implement legacy protocols. Switching to a simple library API, which is
the way the code should have been organized originally, will greatly
simplify their code. For example:
MD5:
drivers/md/dm-crypt.c (for lmk IV generation)
fs/nfsd/nfs4recover.c
fs/ecryptfs/
fs/smb/client/
net/{ipv4,ipv6}/ (for TCP-MD5 signatures)
HMAC-MD5:
fs/smb/client/
fs/smb/server/
(Also net/sctp/ if it continues using HMAC-MD5 for cookie generation.
However, that use case has the flexibility to upgrade to a more modern
algorithm, which I'll be proposing instead.)
As usual, the "md5" and "hmac(md5)" crypto_shash algorithms will also be
reimplemented on top of these library functions. For "hmac(md5)" this
will provide a faster, more streamlined implementation.
Link: https://lore.kernel.org/r/20250805222855.10362-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Since sha512_kunit tests the fallback code paths without using
crypto_simd_disabled_for_test, make the SHA-512 code just use the
underlying may_use_simd() and irq_fpu_usable() functions directly
instead of crypto_simd_usable(). This eliminates an unnecessary layer.
Link: https://lore.kernel.org/r/20250731223651.136939-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Since sha256_kunit tests the fallback code paths without using
crypto_simd_disabled_for_test, make the SHA-256 code just use the
underlying may_use_simd() and irq_fpu_usable() functions directly
instead of crypto_simd_usable(). This eliminates an unnecessary layer.
While doing this, also add likely() annotations, and fix a minor
inconsistency where the static keys in the sha256.h files were in a
different place than in the corresponding sha1.h and sha512.h files.
Link: https://lore.kernel.org/r/20250731223510.136650-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
vectors conversion
- Filter out the invalid machine reset reason value -1 when running as a guest
as in such cases the reason why the machine was rebooted does not make
a whole lot of sense
- Init the resource control machinery on Hygon hw, also in order to avoid
a division by 0 in addition to actually enabling the feature on hw which
supports it
-----BEGIN PGP SIGNATURE-----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=VH8m
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix the GDS mitigation detection on some machines after the recent
attack vectors conversion
- Filter out the invalid machine reset reason value -1 when running as
a guest as in such cases the reason why the machine was rebooted does
not make a whole lot of sense
- Init the resource control machinery on Hygon hw in order to avoid a
division by zero and to actually enable the feature on hw which
supports it
* tag 'x86_urgent_for_v6.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Fix GDS mitigation selecting when mitigation is off
x86/CPU/AMD: Ignore invalid reset reason value
x86/cpu/hygon: Add missing resctrl_cpu_detect() in bsp_init helper
This includes a fix part of the KSPP (Kernel Self Protection Project) to replace
the deprecated and unsafe strcpy() calls in the kernel parameter string handler
and sysfs parameters for built-in modules. Single commit, no functional changes.
-----BEGIN PGP SIGNATURE-----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=8/92
-----END PGP SIGNATURE-----
Merge tag 'modules-6.17-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull modules fix from Daniel Gomez:
"This includes a fix part of the KSPP (Kernel Self Protection Project)
to replace the deprecated and unsafe strcpy() calls in the kernel
parameter string handler and sysfs parameters for built-in modules.
Single commit, no functional changes"
* tag 'modules-6.17-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
params: Replace deprecated strcpy() with strscpy() and memcpy()
Here are a small number of char/misc/iio and other driver fixes for
6.17-rc3. Included in here are:
- IIO driver bugfixes for reported issues
- bunch of comedi driver fixes
- most core bugfix
- fpga driver bugfix
- cdx driver bugfix
All of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaKnPRw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymvOACffARDm9ydwRppM7KpQ0CDEOP8Gd8An2zt1S3z
W5KoFRCkMEOZj93miep3
=Lp/R
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/iio fixes from Greg KH:
"Here are a small number of char/misc/iio and other driver fixes for
6.17-rc3. Included in here are:
- IIO driver bugfixes for reported issues
- bunch of comedi driver fixes
- most core bugfix
- fpga driver bugfix
- cdx driver bugfix
All of these have been in linux-next this week with no reported
issues"
* tag 'char-misc-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
most: core: Drop device reference after usage in get_channel()
comedi: Make insn_rw_emulate_bits() do insn->n samples
comedi: Fix use of uninitialized memory in do_insn_ioctl() and do_insnlist_ioctl()
comedi: pcl726: Prevent invalid irq number
cdx: Fix off-by-one error in cdx_rpmsg_probe()
fpga: zynq_fpga: Fix the wrong usage of dma_map_sgtable()
iio: pressure: bmp280: Use IS_ERR() in bmp280_common_probe()
iio: light: as73211: Ensure buffer holes are zeroed
iio: adc: rzg2l_adc: Set driver data before enabling runtime PM
iio: adc: rzg2l: Cleanup suspend/resume path
iio: adc: ad7380: fix missing max_conversion_rate_hz on adaq4381-4
iio: adc: bd79124: Add GPIOLIB dependency
iio: imu: inv_icm42600: change invalid data error to -EBUSY
iio: adc: ad7124: fix channel lookup in syscalib functions
iio: temperature: maxim_thermocouple: use DMA-safe buffer for spi_read()
iio: adc: ad7173: prevent scan if too many setups requested
iio: proximity: isl29501: fix buffered read on big-endian systems
iio: accel: sca3300: fix uninitialized iio scan data
Here are some small USB driver fixes for 6.17-rc3 to resolve a bunch of
reported issues. Included in here are:
- typec driver fixes
- dwc3 new device id
- dwc3 driver fixes
- new usb-storage driver quirks
- xhci driver fixes
- other tiny USB driver fixes to resolve bugs
All of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaKnTpQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk+7gCfV8UA7wAViZTaXWmqsa3GzeuSMKIAoKdcM0+j
hV48oay+3njPXzlsTp0d
=lRRr
-----END PGP SIGNATURE-----
Merge tag 'usb-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for 6.17-rc3 to resolve a bunch
of reported issues. Included in here are:
- typec driver fixes
- dwc3 new device id
- dwc3 driver fixes
- new usb-storage driver quirks
- xhci driver fixes
- other tiny USB driver fixes to resolve bugs
All of these have been in linux-next this week with no reported issues"
* tag 'usb-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: xhci: fix host not responding after suspend and resume
usb: xhci: Fix slot_id resource race conflict
usb: typec: fusb302: Revert incorrect threaded irq fix
USB: core: Update kerneldoc for usb_hcd_giveback_urb()
usb: typec: maxim_contaminant: re-enable cc toggle if cc is open and port is clean
usb: typec: maxim_contaminant: disable low power mode when reading comparator values
usb: dwc3: Remove WARN_ON for device endpoint command timeouts
USB: storage: Ignore driver CD mode for Realtek multi-mode Wi-Fi dongles
usb: storage: realtek_cr: Use correct byte order for bcs->Residue
usb: chipidea: imx: improve usbmisc_imx7d_pullup()
kcov, usb: Don't disable interrupts in kcov_remote_start_usb_softirq()
usb: dwc3: pci: add support for the Intel Wildcat Lake
usb: dwc3: Ignore late xferNotReady event to prevent halt timeout
USB: storage: Add unusual-devs entry for Novatek NTK96550-based camera
usb: core: hcd: fix accessing unmapped memory in SINGLE_STEP_SET_FEATURE test
usb: renesas-xhci: Fix External ROM access timeouts
usb: gadget: tegra-xudc: fix PM use count underflow
usb: quirks: Add DELAY_INIT quick for another SanDisk 3.2Gen1 Flash Drive
- Fix rtla and latency tooling pkg-config errors
If libtraceevent and libtracefs is installed, but their corresponding '.pc'
files are not installed, it reports that the libraries are missing and
confuses the developer. Instead, report that the pkg-config files are
missing and should be installed.
- Fix overflow bug of the parser in trace_get_user()
trace_get_user() uses the parsing functions to parse the user space strings.
If the parser fails due to incorrect processing, it doesn't terminate the
buffer with a nul byte. Add a "failed" flag to the parser that gets set when
parsing fails and is used to know if the buffer is fine to use or not.
- Remove a semicolon that was at an end of a comment line
- Fix register_ftrace_graph() to unregister the pm notifier on error
The register_ftrace_graph() registers a pm notifier but there's an error
path that can exit the function without unregistering it. Since the function
returns an error, it will never be unregistered.
- Allocate and copy ftrace hash for reader of ftrace filter files
When the set_ftrace_filter or set_ftrace_notrace files are open for read,
an iterator is created and sets its hash pointer to the associated hash that
represents filtering or notrace filtering to it. The issue is that the hash
it points to can change while the iteration is happening. All the locking
used to access the tracer's hashes are released which means those hashes can
change or even be freed. Using the hash pointed to by the iterator can cause
UAF bugs or similar.
Have the read of these files allocate and copy the corresponding hashes and
use that as that will keep them the same while the iterator is open. This
also simplifies the code as opening it for write already does an allocate
and copy, and now that the read is doing the same, there's no need to check
which way it was opened on the release of the file, and the iterator hash
can always be freed.
- Fix function graph to copy args into temp storage
The output of the function graph tracer shows both the entry and the exit of
a function. When the exit is right after the entry, it combines the two
events into one with the output of "function();", instead of showing:
function() {
}
In order to do this, the iterator descriptor that reads the events includes
storage that saves the entry event while it peaks at the next event in
the ring buffer. The peek can free the entry event so the iterator must
store the information to use it after the peek.
With the addition of function graph tracer recording the args, where the
args are a dynamic array in the entry event, the temp storage does not save
them. This causes the args to be corrupted or even cause a read of unsafe
memory.
Add space to save the args in the temp storage of the iterator.
- Fix race between ftrace_dump and reading trace_pipe
ftrace_dump() is used when a crash occurs where the ftrace buffer will be
printed to the console. But it can also be triggered by sysrq-z. If a
sysrq-z is triggered while a task is reading trace_pipe it can cause a race
in the ftrace_dump() where it checks if the buffer has content, then it
checks if the next event is available, and then prints the output
(regardless if the next event was available or not). Reading trace_pipe
at the same time can cause it to not be available, and this triggers a
WARN_ON in the print. Move the printing into the check if the next event
exists or not.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaKnAGRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qotPAQD02idezasiFi0vakLTR+0x/uAI2UOL
5RLfTwmZW7S1FwEAwOvGpKx3k/kUwDp5EReP34A+1Fqyc5Mvps4UCE1s4gM=
=ENHu
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.17-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix rtla and latency tooling pkg-config errors
If libtraceevent and libtracefs is installed, but their corresponding
'.pc' files are not installed, it reports that the libraries are
missing and confuses the developer. Instead, report that the
pkg-config files are missing and should be installed.
- Fix overflow bug of the parser in trace_get_user()
trace_get_user() uses the parsing functions to parse the user space
strings. If the parser fails due to incorrect processing, it doesn't
terminate the buffer with a nul byte. Add a "failed" flag to the
parser that gets set when parsing fails and is used to know if the
buffer is fine to use or not.
- Remove a semicolon that was at an end of a comment line
- Fix register_ftrace_graph() to unregister the pm notifier on error
The register_ftrace_graph() registers a pm notifier but there's an
error path that can exit the function without unregistering it. Since
the function returns an error, it will never be unregistered.
- Allocate and copy ftrace hash for reader of ftrace filter files
When the set_ftrace_filter or set_ftrace_notrace files are open for
read, an iterator is created and sets its hash pointer to the
associated hash that represents filtering or notrace filtering to it.
The issue is that the hash it points to can change while the
iteration is happening. All the locking used to access the tracer's
hashes are released which means those hashes can change or even be
freed. Using the hash pointed to by the iterator can cause UAF bugs
or similar.
Have the read of these files allocate and copy the corresponding
hashes and use that as that will keep them the same while the
iterator is open. This also simplifies the code as opening it for
write already does an allocate and copy, and now that the read is
doing the same, there's no need to check which way it was opened on
the release of the file, and the iterator hash can always be freed.
- Fix function graph to copy args into temp storage
The output of the function graph tracer shows both the entry and the
exit of a function. When the exit is right after the entry, it
combines the two events into one with the output of "function();",
instead of showing:
function() {
}
In order to do this, the iterator descriptor that reads the events
includes storage that saves the entry event while it peaks at the
next event in the ring buffer. The peek can free the entry event so
the iterator must store the information to use it after the peek.
With the addition of function graph tracer recording the args, where
the args are a dynamic array in the entry event, the temp storage
does not save them. This causes the args to be corrupted or even
cause a read of unsafe memory.
Add space to save the args in the temp storage of the iterator.
- Fix race between ftrace_dump and reading trace_pipe
ftrace_dump() is used when a crash occurs where the ftrace buffer
will be printed to the console. But it can also be triggered by
sysrq-z. If a sysrq-z is triggered while a task is reading trace_pipe
it can cause a race in the ftrace_dump() where it checks if the
buffer has content, then it checks if the next event is available,
and then prints the output (regardless if the next event was
available or not). Reading trace_pipe at the same time can cause it
to not be available, and this triggers a WARN_ON in the print. Move
the printing into the check if the next event exists or not
* tag 'trace-v6.17-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Also allocate and copy hash for reading of filter files
ftrace: Fix potential warning in trace_printk_seq during ftrace_dump
fgraph: Copy args in intermediate storage with entry
trace/fgraph: Fix the warning caused by missing unregister notifier
ring-buffer: Remove redundant semicolons
tracing: Limit access to parser->buffer when trace_get_user failed
rtla: Check pkg-config install
tools/latency-collector: Check pkg-config install
- Fix swapped handling of lru_gen and lru_gen_full debugfs files in
vmscan.
- Fix debugfs mount options (uid, gid, mode) being silently ignored.
- Fix leak of devres action in the unwind path of Devres::new().
- Documentation
- Expand and fix documentation of (outdated) Device, DeviceContext
and generic driver infrastructure.
- Fix C header link of faux device abstractions.
- Clarify expected interaction with the security team.
- Smooth text flow in the security bug reporting process
documentation.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaKmYLgAKCRBFlHeO1qrK
LuUiAQDMA7wZCdzvU8kZazpVpiN5t4Y/EeCztbZJlTG1b0F66QEAgKfgBbdKdgvu
LNSXY0Mo6/t6RbFbW5+wR4R+sGn6PwQ=
=wBy0
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Fix swapped handling of lru_gen and lru_gen_full debugfs files in
vmscan
- Fix debugfs mount options (uid, gid, mode) being silently ignored
- Fix leak of devres action in the unwind path of Devres::new()
- Documentation:
- Expand and fix documentation of (outdated) Device, DeviceContext
and generic driver infrastructure
- Fix C header link of faux device abstractions
- Clarify expected interaction with the security team
- Smooth text flow in the security bug reporting process
documentation
* tag 'driver-core-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
Documentation: smooth the text flow in the security bug reporting process
Documentation: clarify the expected collaboration with security bugs reporters
debugfs: fix mount options not being applied
rust: devres: fix leaking call to devm_add_action()
rust: faux: fix C header link
driver: rust: expand documentation for driver infrastructure
device: rust: expand documentation for Device
device: rust: expand documentation for DeviceContext
mm/vmscan: fix inverted polarity in lru_gen_seq_show()
Currently the reader of set_ftrace_filter and set_ftrace_notrace just adds
the pointer to the global tracer hash to its iterator. Unlike the writer
that allocates a copy of the hash, the reader keeps the pointer to the
filter hashes. This is problematic because this pointer is static across
function calls that release the locks that can update the global tracer
hashes. This can cause UAF and similar bugs.
Allocate and copy the hash for reading the filter files like it is done
for the writers. This not only fixes UAF bugs, but also makes the code a
bit simpler as it doesn't have to differentiate when to free the
iterator's hash between writers and readers.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20250822183606.12962cc3@batman.local.home
Fixes: c20489dad1 ("ftrace: Assign iter->hash to filter or notrace hashes on seq read")
Closes: https://lore.kernel.org/all/20250813023044.2121943-1-wutengda@huaweicloud.com/
Closes: https://lore.kernel.org/all/20250822192437.GA458494@ax162/
Reported-by: Tengda Wu <wutengda@huaweicloud.com>
Tested-by: Tengda Wu <wutengda@huaweicloud.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When calling ftrace_dump_one() concurrently with reading trace_pipe,
a WARN_ON_ONCE() in trace_printk_seq() can be triggered due to a race
condition.
The issue occurs because:
CPU0 (ftrace_dump) CPU1 (reader)
echo z > /proc/sysrq-trigger
!trace_empty(&iter)
trace_iterator_reset(&iter) <- len = size = 0
cat /sys/kernel/tracing/trace_pipe
trace_find_next_entry_inc(&iter)
__find_next_entry
ring_buffer_empty_cpu <- all empty
return NULL
trace_printk_seq(&iter.seq)
WARN_ON_ONCE(s->seq.len >= s->seq.size)
In the context between trace_empty() and trace_find_next_entry_inc()
during ftrace_dump, the ring buffer data was consumed by other readers.
This caused trace_find_next_entry_inc to return NULL, failing to populate
`iter.seq`. At this point, due to the prior trace_iterator_reset, both
`iter.seq.len` and `iter.seq.size` were set to 0. Since they are equal,
the WARN_ON_ONCE condition is triggered.
Move the trace_printk_seq() into the if block that checks to make sure the
return value of trace_find_next_entry_inc() is non-NULL in
ftrace_dump_one(), ensuring the 'iter.seq' is properly populated before
subsequent operations.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Ingo Molnar <mingo@elte.hu>
Link: https://lore.kernel.org/20250822033343.3000289-1-wutengda@huaweicloud.com
Fixes: d769041f86 ("ring_buffer: implement new locking")
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The output of the function graph tracer has two ways to display its
entries. One way for leaf functions with no events recorded within them,
and the other is for functions with events recorded inside it. As function
graph has an entry and exit event, to simplify the output of leaf
functions it combines the two, where as non leaf functions are separate:
2) | invoke_rcu_core() {
2) | raise_softirq() {
2) 0.391 us | __raise_softirq_irqoff();
2) 1.191 us | }
2) 2.086 us | }
The __raise_softirq_irqoff() function above is really two events that were
merged into one. Otherwise it would have looked like:
2) | invoke_rcu_core() {
2) | raise_softirq() {
2) | __raise_softirq_irqoff() {
2) 0.391 us | }
2) 1.191 us | }
2) 2.086 us | }
In order to do this merge, the reading of the trace output file needs to
look at the next event before printing. But since the pointer to the event
is on the ring buffer, it needs to save the entry event before it looks at
the next event as the next event goes out of focus as soon as a new event
is read from the ring buffer. After it reads the next event, it will print
the entry event with either the '{' (non leaf) or ';' and timestamps (leaf).
The iterator used to read the trace file has storage for this event. The
problem happens when the function graph tracer has arguments attached to
the entry event as the entry now has a variable length "args" field. This
field only gets set when funcargs option is used. But the args are not
recorded in this temp data and garbage could be printed. The entry field
is copied via:
data->ent = *curr;
Where "curr" is the entry field. But this method only saves the non
variable length fields from the structure.
Add a helper structure to the iterator data that adds the max args size to
the data storage in the iterator. Then simply copy the entire entry into
this storage (with size protection).
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/20250820195522.51d4a268@gandalf.local.home
Reported-by: Sasha Levin <sashal@kernel.org>
Tested-by: Sasha Levin <sashal@kernel.org>
Closes: https://lore.kernel.org/all/aJaxRVKverIjF4a6@lappy/
Fixes: ff5c9c576e ("ftrace: Add support for function argument to graph tracer")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- Fix mismatched kvalloc()/kfree()
- Spelling fixes in documentation
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCaKh6VwAKCRCFwuHvBreF
YQkaAPwNEgZnQlmb8zPrTSm9cNTiCZlEr+s1KbE4brXza68PdwEAgAFm3KiBgG2n
2WhVfGQUcCpPnjcJ7skq4F765Y3GvAE=
=J6IV
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
"Two very minor fixes:
- Fix mismatched kvalloc()/kfree()
- Spelling fixes in documentation"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Fix spelling errors in iommufd.rst
iommufd: viommu: free memory allocated by kvcalloc() using kvfree()
Bindig requires a node name matching ‘^ethernet@[0-9a-f]+$’. This patch
changes the clock name from “etop” to “ethernet”.
This fixes the following warning:
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): $nodename:0: 'etop@e180000' does not match '^ethernet@[0-9a-f]+$'
from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#
Fixes: dac0bad937 ("dt-bindings: net: lantiq,etop-xway: Document Lantiq Xway ETOP bindings")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Acked-by: Jakub Kicinski <kuba@kernel.org>
The upstream dts lacks the lantiq,{rx/tx}-burst-length property. Other
issues were also fixed:
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): 'interrupt-names' is a required property
from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): 'lantiq,tx-burst-length' is a required property
from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): 'lantiq,rx-burst-length' is a required property
from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#
Fixes: 14d4e308e0 ("net: lantiq: configure the burst length in ethernet drivers")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Eric Biggers
Zhihang Shao
Linus Torvalds
Wolfram Sang
Steven Rostedt
Tengda Wu
Dave Airlie
Aleksander Jan Bajkowski